Related
Hi to all that can help me, i just flash the rom yesterday night that i have download and its completed the upgrade and go into the screen and running the installing of the program that come with the rom.
after the full install and the device restart without any more power and picture show.
I have try to charge the battery with wall charger and also replace with new battery but still no power.
Is that mean i'm flashing with a wrong rom and what should i do now.
Can i get it fix?
nicholas99 said:
Hi to all that can help me, i just flash the rom yesterday night that i have download and its completed the upgrade and go into the screen and running the installing of the program that come with the rom.
after the full install and the device restart without any more power and picture show.
I have try to charge the battery with wall charger and also replace with new battery but still no power.
Is that mean i'm flashing with a wrong rom and what should i do now.
Can i get it fix?
Click to expand...
Click to collapse
That really sucks...
nicholas99 said:
Hi to all that can help me, i just flash the rom yesterday night that i have download and its completed the upgrade and go into the screen and running the installing of the program that come with the rom.
after the full install and the device restart without any more power and picture show.
I have try to charge the battery with wall charger and also replace with new battery but still no power.
Is that mean i'm flashing with a wrong rom and what should i do now.
Can i get it fix?
Click to expand...
Click to collapse
which rom did u flash it with ??? wat ver ur configs before that . ur ipl/spl version os and etc.
sometime it happens that the power button doesnt works ....
try poking the reset button wiz ur stylus ... press and hold for sumtime and c wat happens
if it starts then ... press it again and wen the screen goes blank pree the camera button and hold it ... ull get into the bootloader ... den connect da usb and flash a new rom or da old factry one ...
i use molski's rom its really stable
well i'm using Wizard_Love_2.26.10.2_WWE_Novii+CF2 for the first but after that i just try to flash the rom the the chinese support rom which is Dopod_CHT_TW_RUU by using the newromupdateutility to flash it to my phone. At the beginning the rom flash successful and login to the device for install all the program that come with. After all the installation done the device will restart but never boot up anymore even u can see any green light flashing at all. Please dont tell me i damage my rom, should i send for repair?
or someone can help me out please......
nicholas99 said:
well i'm using Wizard_Love_2.26.10.2_WWE_Novii+CF2 for the first but after that i just try to flash the rom the the chinese support rom which is Dopod_CHT_TW_RUU by using the newromupdateutility to flash it to my phone. At the beginning the rom flash successful and login to the device for install all the program that come with. After all the installation done the device will restart but never boot up anymore even u can see any green light flashing at all. Please dont tell me i damage my rom, should i send for repair?
or someone can help me out please......
Click to expand...
Click to collapse
did u try da soft reset ???
yes i did but nothing happen at all
Xda Neo
I have the same problem. IPL and SPL 2.15.00001 and tryed to downgrade but after restart it does not power on. Tried everything but no way to power on. Is somebody know how to make it work again.
Regards,
You guys tried to flash a G3 Rom on your G4 Wizard.
So your bootloader (IPL/SPL) that is 2.xx.0001 is overwritten by a G3 bootloader that is 2.xx, so in other words....your devices are bricked.
Please someone, correct me if I am wrong.
Molski
yup, I agree. Bricked hopefully someone can fine the JTag on these devices.
Wow that sucks! Full moon over Miami last night, naw that can't be it .....
Sorry but unfortunately I must follow my Grandmother's advice concerning when I don't have anything nice to say...
R there NO ALTERNATIVE WAY for THIS?? HOPE we can help those people that made a mistake by upgrading to a ROM that doesnt fit to their WIZARD. due maybe because of TOO XCITEMENT they forgot to CHECK FIRST(PLS! ALWAYS CHECK FIRST) their IPL/SPL.
HOPE those master GURU's can do something!
So, please someone tell clearly how to know G3 or G4 of the Wizard
thanks so much
Sorry but I have no more tolerance for people who just jump in first without doing a little research. A while back when the G4 first came out we didn't know. Now everyone who puts out a ROM warns people about the possible consequences. And there's so many threads on just the first page with tales of woe... how can a person miss them all??
I'm sorry but my parents raised me to take responsibility for my own actions, as Baretta used to say" Don't do the crime if you can't do the time"
Similar to when a Cat 4 hurricane is coming at you and you don't leave after being warned.... then blaiming everyone but yourself...
And if anyone wants to rebute me on this, don't bother as I've neither the time nor the patience.
Bottom line is that flashing phones has the very real possiblity of trashing an expensive piece of hardware in a very short period of time. If one has any doubts, then they shouldn't do it! And if a person doesn't have a concern initially then they're asking for trouble.
Sorry....
magicer said:
So, please someone tell clearly how to know G3 or G4 of the Wizard
thanks so much
Click to expand...
Click to collapse
a G4 has a .00001 on the initial splash screen.
ArtXT said:
R there NO ALTERNATIVE WAY for THIS?? HOPE we can help those people that made a mistake by upgrading to a ROM that doesnt fit to their WIZARD. due maybe because of TOO XCITEMENT they forgot to CHECK FIRST(PLS! ALWAYS CHECK FIRST) their IPL/SPL.
HOPE those master GURU's can do something!
Click to expand...
Click to collapse
The problem is that if your bootloader (IPL/SPL) is fuc*ed up, there is no way to get it in bootloader mode to do a flash!
Only known solution is with JTAG connector, but that solution is not a clear solution yet, but I dont know nothing about that solution (simply...because I never needed it).
Molski
Dr Puttingham said:
Sorry but I have no more tolerance for people who just jump in first without doing a little research. A while back when the G4 first came out we didn't know. Now everyone who puts out a ROM warns people about the possible consequences. And there's so many threads on just the first page with tales of woe... how can a person miss them all??
I'm sorry but my parents raised me to take responsibility for my own actions, as Baretta used to say" Don't do the crime if you can't do the time"
Similar to when a Cat 4 hurricane is coming at you and you don't leave after being warned.... then blaiming everyone but yourself...
And if anyone wants to rebute me on this, don't bother as I've neither the time nor the patience.
Bottom line is that flashing phones has the very real possiblity of trashing an expensive piece of hardware in a very short period of time. If one has any doubts, then they shouldn't do it! And if a person doesn't have a concern initially then they're asking for trouble.
Sorry....
Click to expand...
Click to collapse
I knew I have a G4 and can't upgrade/downgrade with G3 roms or even change IPL/SPL, but I did that :]
Just found ROM v2.22.1 (I think), like my original Wizard's was. I was so happy that I found it, that I forgot about G3 chips existence 8)
Well, ROM was for G3 -_-
Just ran too fast and slipped. Maybe I got that speed after very often Pioneer BCT 1430 flashing. It is just immortal :]
well i know about the G3 and G4 but the rom that i downloaded from doesn't say anything about support G3 or G4 thats why i consider this rom doesn't included IPL and SPL just like the custom rom been make from other member.
Damn now i have to send my phone back to factory for fixing it. Lucky i still have a warranty of it.
nicholas99 said:
well i know about the G3 and G4 but the rom that i downloaded from doesn't say anything about support G3 or G4 thats why i consider this rom doesn't included IPL and SPL just like the custom rom been make from other member.
Damn now i have to send my phone back to factory for fixing it. Lucky i still have a warranty of it.
Click to expand...
Click to collapse
I do feel for you. I believe that the best thing that we can do is to not even make G3 ROM's available to the general public. Maybe all new ROM releases should be IPL/SPL - less. If one needs a ROM that will upgrade their bootloader they'll have to request a password protected file.
I just dunno...
Dr Puttingham said:
I do feel for you. I believe that the best thing that we can do is to not even make G3 ROM's available to the general public. Maybe all new ROM releases should be IPL/SPL - less. If one needs a ROM that will upgrade their bootloader they'll have to request a password protected file.
I just dunno...
Click to expand...
Click to collapse
...which is one of the reasons why carriers make it so hard to flash a ROM from one carrier to the device of another.
Qtek 9100 half bricked
Hi Molski
I'm new here.Just 'd like to know if you could support me on this matter.
Here we go...
I've flashed my 9100 from wwe to esn (spanish) with the ROM 1.3.7.5 or something like this.
This is the problem...I got a power failure in the middle of the flashing process.So now the device isnt able to start up it didnt install the OS properly.
Now it says:
IPL 2.24 (i managed to flash the ipl n spl)
SPL 2.24
OS 1.3.7.5
But I'm pretty sure that there's no OS watsoever because after keep trying flashing with other ROM in bootload mode.I finally managed with an Orange of 34 mb it updated the ROM,that is the IPL And SPL and with the process was running I've noticed the screen got blank and updated it properly.I was realy happy when I saw it but even though it did it properly I still got the same problem.The pda doesnt start up.When I flashed it for the first time I did it with care,followed all the instructions,that is, unlocked the CID first etc.But had the damn joy of getting a power failure in the middle of it.
I'm just wondering if one of you would be able to gimme a light on it.I've tried everything but flashing it with a G4 ROM coz I know it wont work.
Regards
Luiz Santos
Molski[/QUOTE]
Hi all,
Hate to say this but I accidently also bricked my phone (I had PDAVIET working and then saw an update so forgot to put it back to WM5 first and then to WM6 again, now stuck in boot screen )
The reason I post this thread is I got a small question which will be one of my last resorts to fix it.
As I can only access the bootloader I hope this will work, so here is my question. If I pay 28 euro to IMEI-CHECK.UK to get an CID unlock, am I able to install any ROM (e.g. WWE English or WWE German etc..) and also will it unlock while I only can access the bootloader or does it require a functional OS ?
Many thanks...going to continue and slap myself in the face a couple of times..
HTC PLEASE RELEASE THE FREAKIN WM6 Dutch....argh
iTeQ said:
Hi all,
Hate to say this but I accidently also bricked my phone (I had PDAVIET working and then saw an update so forgot to put it back to WM5 first and then to WM6 again, now stuck in boot screen )
The reason I post this thread is I got a small question which will be one of my last resorts to fix it.
As I can only access the bootloader I hope this will work, so here is my question. If I pay 28 euro to IMEI-CHECK.UK to get an CID unlock, am I able to install any ROM (e.g. WWE English or WWE German etc..) and also will it unlock while I only can access the bootloader or does it require a functional OS ?
Many thanks...going to continue and slap myself in the face a couple of times..
HTC PLEASE RELEASE THE FREAKIN WM6 Dutch....argh
Click to expand...
Click to collapse
you dont have to go back to WM5 each time u want to update ur ROM. Mainly you should have installed hard SPL before any install.
you can search wiki for unbricking, i am sure i saw one.
Well I found a lot of stuff for the Hermes, which reminds that I should have bought a Hermes when I had the chance and i'm now stuck with this piece of sh*t.
I even tried other roms for other devices , my only chance would be CID unlock and install a WWE or wait for a million years for HTC to come out with WM6.
Thanks for the reply though.
Cheers
for noobs :
sany said:
you dont have to go back to WM5 each time u want to update ur ROM.
Click to expand...
Click to collapse
Sure, you don't have to, but I strongly recommend this. I bricked my Herald a couple of times while flashing from PDAViets WM6. My luck, I have a RUU to unbrick.
This one is for the newbees:
If you don't have a working WM5 RUU to unbrick your Herald, you should _NOT_ mess with this stuff.
Would it be by any chance a dutch one? The RUU Rom.
iTeQ said:
Would it be by any chance a dutch one? The RUU Rom.
Click to expand...
Click to collapse
NO, definately NOT. I searched my ass off for the Dutch HTC ROM.. But there simply is none. The only chance for unbricking is contacts inside telecom Repair Centre or sending your device to HTC. Or of course the (way too long taking) WM6 update from HTC..
If the WM6 update from HTC arrives how will we be able to use it. My phone allways complains about the 'vender id' when I use a WWE ROM. Why would it accept a HTC ROM?
Is there still hope?
hello i have a question about the WM5 RUU. can ik make it whit my one p4350 dutch???
if it can, how can i do that??
Monarch73 said:
Sure, you don't have to, but I strongly recommend this. I bricked my Herald a couple of times while flashing from PDAViets WM6. My luck, I have a RUU to unbrick.
This one is for the newbees:
If you don't have a working WM5 RUU to unbrick your Herald, you should _NOT_ mess with this stuff.
Click to expand...
Click to collapse
tell me more about this RUU and hard SPL....as I know i have hard spl....then do you advice me to have this RUU as well, pls advice
erictummers said:
If the WM6 update from HTC arrives how will we be able to use it. My phone allways complains about the 'vender id' when I use a WWE ROM. Why would it accept a HTC ROM?
Is there still hope?
Click to expand...
Click to collapse
Well obviously the WWE RUU isn't for your phone. If you have a dutch phone you need a Dutch RUU, if you have a German phone then you need a German RUU and so on.
When HTC releases the WM6 RUU they should release one for each language.
Sended HTC an email 4 days ago, men what a **** company that is...I still haven't got a response. Is it me or is this a really bad company in supplying support....never had these problems when I had other devices (Mio A701).
Anyone got any news from them ?
Yesterday they said that the update will be in August.
I hope...
Chris
iTeQ said:
Sended HTC an email 4 days ago, men what a **** company that is...I still haven't got a response. Is it me or is this a really bad company in supplying support....never had these problems when I had other devices (Mio A701).
Anyone got any news from them ?
Click to expand...
Click to collapse
Remember that it is vacation time for HTC Europe.. Everything takes almost twice the time then normal..
Email from HTC....i'm f*cked
Dear Customer,
You only can install the ROM with the original language of the device.
When you are registered at www.europe.htc.com in eClub, the site doesn't allow you to install a different ROM.
It doesn't matter if you are on the english site, your IMEI and SN number are recognised and will install a Dutch ROM if there is one available.
HTC doesn't have any ROM update for this device available yet.
If you require to re-flash your device than you need to send it in for repair.
Go to www.eurotwice.be
=> select language
=> Private user
=> Place your order
=> Select brand (HTC will be added)
=> Select Model
Type in customer information and IMEI.
Search which drop point to use and print out service paper.
Thank you for your enquiry, Should you have any other problem, please do not hesitate to call us. Your Local number can be found at http://www.europe.htc.com/support/csbyphone.html
Best regards,
Marc Vernaeve
HTC Europe
[email protected]
http://www.htc.com
iTeQ said:
Email from HTC....i'm f*cked
Click to expand...
Click to collapse
Dude why? Just wait for the official release!
Vendor Id
Last day of my vacantion. What's in the upload? The new WM6 updates!
Let's try the Dutch one. Still got the Invalid Vendor Id message...
Do I have to wait for the Vodafone update?
How can I remove this Vendor Lock when I can't boot my device into WM5 or WM6?
Hi, i had a wizard for 2 years and buyed a xda terra now.
I have standard O2 German rom on it
I dontt know how to start with all the stuff.
I have wm6 on it and want a other cool rom.
What i have to do first?
Can you please send me then the link of the threads?
Sorry for my bad english , im german
ok so heres the problem. the xda terra can flash, but it cannot recover because a RUU has not yet been released yet.
The problem here is two fold
First, to flash you would need to install a fresh copy from the RUU, which is impossible.
Second, if you were to try to flash from your current OS, it would brick and you would not be able to recover because there is no RUU.
Sorry
hmm. i flashed it :S
it worked. with the touch it 2.3 rom.
i installed it over the original wm6 from o2.
hope i didnt a big mistake
oh wow, it worked? in my experience, i've always had to flash back to ruu before flashing. That said, you prob won't be able to flash again. Also, if you do try, make sure YOU DO NOT TOUCH THE USB CORD. I've like hit it a little and the entire flashing process goes to hell. Remember, for you, hell=dead forever.
Hey guys.
i just wanner say first im a noob at phones so dont flame me.
Right, i got a brand new t-mobile compact 2 (htc charmer) with t-mobile rom on it. i really wanner upgrade to Windows mobile 6 so badly but i cannot flash my rom cus it aint unlocked.
So i tried doing it myself with the unlocker this website suggests, but that always fails .
What i think happend is this mda has been updated to the latest t-mobile rom. Which is:3.8.2.21 WWE and the unlocker is only for the old versions.
I actually dont know im right at all. but if anyone can get back to me either by pm, email or If you know your stuff please dont hesitate to add me on msn, and talk me though it. trust me its alot easier to do that then wait for thousens of emails.
Anyway any help will be amazing. remeber im a noob so please dont flame me, i just want to be able to experince the mobile 6 that all you guys are.
Email/MSN: [email protected]
Thankyou so much everyone. I hope you can solve this problem.
Oliver Pole
You don't have to unlock your phone to flash WM6. Considering you've already flashed the latest t-mob rom, just go to TouchFLO ver. 2.1 thread in Charmer Mobile 6, download the rom, read the instructions and flash. It will work.
Good luck.
Okiess gonner try it now. hopefully it will, will get back to you soon.
Ill describe the entire process.
Nope still not working, wont flash.
I run the flasher bat file the screen stays completely still nothing happens and i donno why. is it cus its not cid unlocked. i know you said it dont, but one of the guys said it did.
Get back to me soon
poleanator said:
Nope still not working, wont flash.
I run the flasher bat file the screen stays completely still nothing happens and i donno why. is it cus its not cid unlocked. i know you said it dont, but one of the guys said it did.
Get back to me soon
Click to expand...
Click to collapse
my charmer wasnt cid unlocked too, but i could install [vlodeck TouchFLO WM6 ver. 2.1]
it can be, that you have to install t-mobile AKU 3.3 from handy-faq.de
Hello out there.....
First of all i have to say THX to all these people which are really willing to help every1 with their great tutorials. Ive used alot of them already. Thanks.
And i have to say sorry for my english language, due Im german and i left school behind long time ago. I'm really taken pains to write this comment.
Now, in my case ive tried to restore my device (Xperia X1i) to OEM status step by step as its shown in this thread.
My worst issue is that my touchscreen aint work anymore after i flashed a custom ROM and that i got stock at the point where the ROM wants to configure the OS like "Tap the screen to continue with configuration".
Ive tried to flash way too much ROMs using HardSPL but the touchscreen wont let me do anything - no reaction.
So how can I restore the bootloader (SPL) on my device, when my touchscreen aint work? How can I take the following step without any working ROM ?
sirsycho said:
12. Run SSPL.KAIS.exe from your phone (make sure you do this on your actual device and not your PC)
Click to expand...
Click to collapse
I do not know what I did wrong, that the screen wont react anymore, but im sure that the SPL is the cause for this disaster.
I'm really desperate couz i already have sent the device to the SE Support, where they told me that there is an "extraneous" on my device although ive flashed the Stock ROM firstly... there was still something that bothered them...
After i got the device back the touchscreen worked again as funny, allthough the support did nothing on the device as they said in the delivery.
A bit skeptical but with alot of happiness i kept on flashing some ROMs after that.
Now, after i found a good ROM and kept this one on my device for some days the screen doesnt work again.....
This is what my bootloader says right now
Code:
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
....seems like the HardSPL is still there......
Honistly i had to apollogize (maybe too late) that this part of using a cellphone (flashing a ROM using HardSPL etc.) is a big fish and that ive underrated it. Now i have a 400$-Device which aint work anymore
Ive read like all Tutorials here at xda-devs containing something about flashing a ROM or informations about SPLs; tried everything
I feel like im lost and fu**ed right now....
Is there any1 can help me with my problem?
Hopefully there is.....i pray for him
first flash a stock rom
then just run the hard-spl exe, and replace the ruu_signed.nbh file
why are you trying to use kaiser spl?
use the things found in the hardspl sticky in the xperia section
Wrong Tutorial
You're using tutorial for wrong device (HTC Kaiser)
The correct tutorial is in first post (extra how to: how to restore Stock SPL for warranty reasons.)
http://forum.xda-developers.com/showthread.php?t=431218
But before restoring original hardspl you should flash with original rom found in this thread http://forum.xda-developers.com/showthread.php?t=475482
wow thanks for your answers !!
i never thought ill get response.
Its really weird that i havnt found that tut before bcuz i was looking through whole board.
I will try do that tomorrow.
I hope that it will work then. Don't wanna pay 300$ for a new device
Else there is mtty to restore the bootloader
Aight i have done the steps showing in the tutorial.
1. I have flashed teh Stock ROM (R2A german - Vodafone)
2. I've used the RUU with the stockSPL given in that post.
Now my tricolour screen shows the following
Code:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707
This is what it shall looks like OliNex said.
I hope this is all i had to do, to make use of my device's guarantee, cuz the touchscreen still doesnt work
Seems like i really have to send my Xperia to the Support again (now hopefully with a ROM + SPL they wont reject)
But if i send my device with "extraneous" again i have to pay another 15€ just for let them do a costs estimate -.-
I would like to get a reply before i make use of the support again.
Thanks for all your help
Glad to hear recovering to stock rom + spl worked out.
Your touchscreen doesn't work when you have booted up windows?
If that's correct then I suggest to send in the device for service. Although
it might not help I suggest updating your device with SE updating service (SEUS) first.
After the flash remove the battery for 10 seconds, then turn it on.
Hope it helps and otherwise servicing the device is free of charges
Haha!
That's what im doing right now, using SEUS
Thanks for the tip with the battery but i already tried that way too often
Edit:
Ok, touchscreen still aint work....
Time to contact the support...at 11:45 PM **WOOT
nvm....Ill wait till tomorrow
gn8 and thanks for helping me with my issue ^^
a few days ago I returned my silver X1 for the same issue, my touch screen (digitizer) doesn't work. Then right in front of SE support person, he justed took out the battery and rebooted. Then it worked. The thing is, I did the same thing several times earlier that day and it did NOT worked. I am worrying of getting the same problem again and I only have until november 30th until my 1 year warranty expires. I haven't tried any cooked roms and it is because of warranty purpose. Altough I'm not new to custom roms since I own an Alpine and a Prophet. I've been here for some time now.
The thing that holds me back testing cooked roms on my Xperia is the aftermath if in case my device goes half-dead. I almost always read the restoring on to official roms everytime I get here, but still the thousand dollar spent on my phone's tag price comes with a fear of who's gonna rescue if my phone won't work. And to add that spare parts aren't available here as of the moment. And yes I'm eager and very curious about almost everyone saying cooked 6.5 is faster than stock roms but though I haven't tested it I have to disagree for now on my case basis.
First, my Xperia doesn't come with a carrier lock. It's locally called "open line" in my country I guess technically called debranding. Then my phone has the generic r3a rom via seus I think it's generic uk. Lastly, for some reasons, the touchflo 3d doesn't work with my device I've tried it since r1 firmware time. Some response told me to unlock-debrand my phone first but I dont have to since it isn't locked. Still installing tf3d makes my phone hang, doesn't uninstall, doesn't show in the themes list if installed as a theme, and doesn't let me have another panel since it always stay as tf3d whenever I choose another one. And it is very unstable in my device. These happened even if I install it as a panel.
I feel handsets here are faster than handsets that are locked by a carrier so I'm thinking again since for now, my Xperia works for me as stock as it is.