Related
Guys,
Anyone has solution to put widcomm into BA's WM 5.0?
Really really wan it man!!! no Widcomm my stereo headset is wasted...
This is really the most fundamental problem....sigh...
Cheers
At this moment, only MS BT stack works under WM5 so far.
Edit: deleted
efjay said:
Here's something i found on the pdaphonehome forums http://www.pdaphonehome.com/forums/showthread.php?s=&threadid=53643 originally posted by Superdave
Quote from pdaphonehome forums
"Widcomm BT Stack working
After all kinds of messing I finally got the widcomm stack working on the i730. Im still exploring and have alot of testing and documenting to do, but, I just thought I would post a progress thread.
,Dave
Tested and working Profiles..
DUN (Dialup Networking)
Serial
FTP
A2DP (High Quality Audio)
File Transfer
Business Card Exchange ( OBEX )
Network Access (PAN)
Ok,
Here's the first rough. These instructions worked from a hard reset for me.
Using registry Editor
Go to HKLM\Software\Microsoft\Bluetooth\Transports\Builtin\3 and rename the value "name" to "aname"
That will disble the MS bluetooth stack, but, still allow it to intialize the radio.
--Soft Reset.
Download BT3900.CAB fromhttp://www.myehud.com/xv6600/bluetooth/, copy it to the phone and install it.
In reg editor go to HKLM\Software\Widcom\BTConfig\General
Change TransportLibrary to "BtCeBCSPTrans.dll"
Change RadioInitLibrary to ""
Change RadioInitPostLoadScript to ""
Change RadioWLanCoexEnable to ""
Change RadioWLanCoexDisableScript to ""
In reg editor go to HKLM\Drivers\Builtin\Serial
Change driver to anemo_serial.dll
In reg editor go to HKLM\Software\Widcom\BTConfig\SerialTransport
Change Parity to 2
Change Port to 5
In reg editor go to HKLM\Software\Widcom\BTConfig\Services\0001
Change ComPortNumber to 2
In reg editor go to HKLM\Drivers\BuiltIn\Serial5
Change DeviceArrayIndex to 2
Change Index to 2
Create a shortcut in Windows\Startup pointing to \windows\BTTrayCE.exe
--Soft Reset
You can now turn the radio on from the icon on the today screen (lower right).
If desired you can also install the A2DP patch from http://www.myehud.com/xv6600/bluetooth/
If you get license expired after a few seconds (you should). You'll need to copy over the
BTTrayCe.exe from the working dir of the bt-ppc.1.5.0.0801.rar you can find here.
http://forum.xda-developers.com/vie...xpired&start=50
Notes
If the radio turns on but you cant detect devices check your mac address
You can check you Macaddress by going to HKLM\Microsoft\Blueooth\i730 and looking at the key MACADDRESS.
If you go to settings\accessibility in the widcomm bt stack with the radio on the addresses should match.
If they dont match you'll need to turn your radio off, soft-reset then turn it back on.
You should be able to switch between the 2 stacks by changing the aname back to name under transports"
Looking through the thread it appears to have worked for some people. I tried it myself but was getting an error. I also couldnt find the driver he mentioned "anemo_serial.dll". I would think as the BA radio works with the 3900 stack already it may be possible to get it working under WM5. Anyone with any ideas?
Click to expand...
Click to collapse
Just tried. does not work, insufficent driver memory.
****. DO NOT try that tuturial. After i did that, my BA couldn't detect the GSM radio anymore, i had to Hard Reset....
I have posted This thread to assist anyone like me, who is not a programming whiz. Got to Install this mainly through trial and error and I am not an expert in this. So If anyone can make my steps easier please do!
This is a Variation Installation For a thread a while back in October 2005 Author Ncruz and effjay. Ncruz Posted a wm5 cab. This cab does not install directly due to permissions. However I have extracted the files using windows cab manager.
First are the files are required in windows. If it asks about permissions copy to PDA root folder then copy with Resco File Explorer and overwrite. Next are the registry files. You can import them with a registry program such as tre or regedit.
If you want Microsoft Voice commands to be the default program overwrite SSDialer.exe in windows folder with Voicecmd.exe from Program files/Voice command/ otherwise Cyberon Voice is initiated when you press headset.
I will post the cab in its entirity although it will not install, incase someone knows an easier method to get voice commands working Please contibute to this thread. However this method worked for me. Below in the zip are the files Extracted with Win Cab manager in zip format so you can copy zip to your pda then extract them to the correct folders, along with the registry files you need to import to registry.
N.B..sound of Voice commands is through PDA and not headset. Pressing headset connect button opens Cyberon or active voice command depending on what you have
Can not seem to be able to import the reg files....
OKay, got the files to import and the files copied - no go for me. Darn-it.
Installation
did you do a soft reset with the software built with the rom and repair the bluetooth headset
I might have reset without using the software reset....
However, got it working with this cab file that I found on my storage card. I even got MS Voice Command to work when I hit my BT Headset button.
Heck, it did not even change the record button to SSDialer! I would have thought it would but it did not. So, I am happy!
glad its working for you
now how can i do?
download odie3 's cab file and install? that's right?
Then, when device auto turn off, bt still go off as before?
I can't download files..... Where can I get them?
Re: now how can i do?
kriengkrai said:
download odie3 's cab file and install? that's right?
Then, when device auto turn off, bt still go off as before?
Click to expand...
Click to collapse
The only way I know how to keep BT on is by plugging in my Device to a power source and doing a soft-reset. As long as I do not turn it off with the power button or have it set to auto-power off while plug in, BT will stay on. I do this everytime I get into my car - since it takes me a hour [sometimes more] to get home, so my BT Headset always works.
Hopefully I explained that correctly for you to understand....
Odie
Your query confirmed. The Wlan manager icon from the today screen goes as a side effect of installing the cab. Wifi still works but the Icon in today is not there. Not a big deal for me, as I have skinned my Pda with Wisbar, which has a wifi icon.
Re: Odie
MOHDWADEA said:
Your query confirmed. The Wlan manager icon from the today screen goes as a side effect of installing the cab. Wifi still works but the Icon in today is not there. Not a big deal for me, as I have skinned my Pda with Wisbar, which has a wifi icon.
Click to expand...
Click to collapse
Yes it happened to me as well, but i prefer BT Voice Command Activation than WLAN icon
Thanks for the info
BT activation doesn't work for me...
For some reason the activation through BT headset doesn not work for me.
I'm using WM5 TuMa 1.3 ROM.
The BA_WM5_Voice_Dialer_2.cab doesn't install on my device (permission violation), so I copied the files manually to the Windows folder.
The reg files also don't import to my registry when double-clicking, so I made the changes manually.
It still doesn't work.
Now, when I hit the button of my BT headset (Moto HS-810), the standard dialer is activated (instead of the voice command app) and I hear hissing sounds in the headset.
I tried it both with Cyberon and MS apps. Both don't work.
Did anyone encounter this problem? Anyone solved it?
Thanks.
anyone knpow how to do this with voice command on 2003se?
Just upgraded to TuMa 1.3 and have found a MUCH more simple way of doing it.
1) Install Microsoft Voice Command
2) Download Total Commander (http://www.ghisler.com/ce.htm)
3) Using Total Commander change the read only tickbox for \windows\sddialer.exe so that there is no tick (1 press just greys it out, i needed to press twice) <- browse to \windows in TC and right cick (hold down) on sddialer.exe, and click properties.
4) (you don't need TC for this) Copy %install dir%\voicecmd.exe (where %install dir% is the directory you installed voice command to) to a temporary location and rename it to sddialer.exe.
5) (using TC) 'Right click' on your new sddialer.exe (previoult voicecmd.exe) and select 'cut to clipboard' then navigate to \windows\ and 'right click' and select 'paste from clipboard', when propted overwrite the origional file.
6) press the button on your headset and test it!
the only thing we need now is for some clever person to work out how to route the voicecmd audio through to the headset instead of the load speaker (to my knowledge it uses the microphone on the headset allready (at least it works when i speak quietly from the next room )
it works like a charm
cheers
Do what Midlet says?
If I do what Midlet says- will I still need the 2 files that mohdwadea has posted? Is Midlet's process a complete stand-alone process... or is if preceded by more steps?
Re: Do what Midlet says?
sgrbhtngr said:
If I do what Midlet says- will I still need the 2 files that mohdwadea has posted? Is Midlet's process a complete stand-alone process... or is if preceded by more steps?
Click to expand...
Click to collapse
Have not investigated midlets way of installing as Mine is working. However i suggest that if you check your registry and see if the reg keys i posted within the zip are there. If his way works fine, if it does not i suggest you import the keys into registry and see if that helps. I also strongly suggest you make a note of the keys and where they are imported too, as if it does not work you can remove them.
It worked
Mohdwadea,
Your method worked! This time I performed a soft-reset after the installation and also re-connected the headset. I did not have to go he registry-entry route because the cab-file installed on my device.
This will help me a lot on the road in business. God bless you.
Just glad its working for you!
voice not sending
MOHDWADEA,
I am using this fix a lot on the road. It works very well... expect for in one situation! I can initiate voice dialing by the record button on my device and it accepts voice dialing commands through the bluetooth headset and teh call goes fine.
However, if I initiate the voice dialing using the button on my blueooth headset (Cardo Scala 500), it initiates the voice dial app just fine, accepts commands and conencts the call.... but the other party cannot get my outgoing voice through my bluetooth headset, rather it gets the voice from the mic on my phone. Also, the incoming sound can be heard in my bletooth headset but ALSO on the phone.
Any suggestions?
Thanks!
Sagar
I-mate PDA 2K
WM5 TuMav1.3
Just sorted BT voice dialing on my TRINITY witha Jabra BT250 all working fine
using the infor here:
http://forum.xda-developers.com/showthread.php?t=281977
I've also mastered using BTAudioOn.exe in the registry in place of the voice dialer to give me Audio Streaming
Only problem is, as the article in the forun suggest it disables the voice commands!! I can live with this as I only want to stean the TOMTOM voice when using the satnav while walking or on my bike.
What I had in mind was a a couple of icons, one to make the registry changes for the BT Audio streaming and the other icon to toggle back (ie change the registry back to voice comand via the BT headset). As far as I can see (once BTaudioOn.exe is copied to my Trinity) the only difference between turning my Jabra BT250v into an audio streaming headset and a phone headset are the two registry changes; and then change them back to give me a Phone headset again.
Can anyone tell me if this is possible to use a .REG file?
Can it be written on a PC and then copied to the Trinity so that it runs?
Will reg files run the same on a PDA and they do on a PC?
Thanks in advance
Try to use SKSchema software, it can put any values in registry depends of any window or process runing on the device. It watch & if you made a rule to put in registry key voicecommand with launcheAppEnable zero as window of TomTom appears u can get a continiusly sound in handsfree if also it put long value in Duration option.
Where do I fond the software please
Also... could you please explain a little better a I don't understand what you have written...sorry!
http://pocketgear.com/software_detail.asp?id=20385
& read help in windows directory after install
No attempts to claim credit for inventing this process (the PTT fix is in the Wiki, and the Cyberon bit has been around since the Wizard days), but this could be the first time it's been completely posted in one place.
Cheers!
-------------------
Step 1. Disable Cyberon
- Delete SDDaemon.lnk in \Windows\Startup
- Delete the Voice Dialer shortcut from \Windows\Start Menu\Programs (or whatever submenu folder it might be in)
[NOTE: if you don't delete the shortcut and accidentally click it (or launch the program directly from File Explorer), you may have to repeat the ENTIRE procedure]
- In each of these registry locations:
HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Shell \ Extensions \ ContextMenus \ Contacts \ Main_ContextMenu
HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Shell \ Extensions \ ContextMenus \ Contacts \ Main_Tools
HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Shell \ Extensions \ ContextMenus \ Contacts \ Summary_Tools
----> Remove this key entirely: {2C0E9904-F32D-4f53-875F-479F5CA81E18}
- In this registry location: HKEY_LOCAL_MACHINE \ ControlPanel
----> Remove this key entirely: VoiceTagCPL
Step 2. Disable PTT and Enable PTT Button
----> Remove this key entirely: HKEY_LOCAL_MACHINE \ Services \ PTT
From HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Shell \ Keys
- Add a new key called "40C6"
- Add a string under the key called "Name" with the value "Button 6"
- Add a new key called "40C7"
- Add a string under this key called "Name" with the value "Button 6 (hold)"
Step 3. Install MSVC 1.6
- Be sure to use the latest build, which can be found at http://www.sendspace.com/file/f48smf
< File Name: MSVC_US_PPC 1.6.17913.CAB Size: 3MB >
NOTE: this is licensed software; you should only download this update if you already have a licensed copy of MSVC 1.6
Step 4. Remap MSVC to PTT button (optional)
Step 5. Pair your headset
You should now be able to initiate MSVC from your BT headset and receive prompts thru its speaker. Finally, I can leave my phone in the case when I want to!
Enjoy!
BT button VC1.6 Activation
I have a HTC branded TytnII and there is no PPT reg entry. Also the keys
From HKLM\Software\Microsoft\Shell\Keys
- Add a new key called "40C6"
- Add a string under the key called "Name" with the value "Button 6"
- Add a new key called "40C7"
- Add a string under this key called "Name" with the value "Button 6 (hold)"
already exist. So..
this didnt work for me. If i push the button on my BT headset it redials the last number.
Button 6 is the Voice command button near the wheel so i cant see how the BT headset button is going to work??
any help would be great as this is then only function missing from a great device.
cheers
Should have mentioned that this has been tested by me only on a Tilt with AT&T stock ROM...
You shouldn't have to worry about the PTT-related steps on a TyTN II (nothing there to disable).
goestoeleven said:
Step 1. Disable Cyberon
[/B]- Delete SDDaemon.lnk in both \Windows\Start Menu and \Windows\Startup
- In these registry locations:
----> Remove this key entirely: {2C0E9904-F32D-4f53-875F-479F5CA81E18}
Click to expand...
Click to collapse
So this seems to be a very straight forward process, easily followed by anyone that has any right to be mucking about in a registry. However, ()SDDaemon.lnk does not exist in \Window\Start Menu it does exist in \Windows\Startup
Also, Remove this key entirely... Where the hell is it?
All other steps work fine..
Russ741
well sort off...
The PTT is now maped to VC, very cool works good.
However VC is still not working properly, I can issue commands, (dial, call, time, etc) but the system will not announce calls or appointments. I used the same CAB I have used on previous installs that worked fine before.
Any ideas anyone?
Russ741
the fix
If anyone else is having issues with call announcements look here for the fix.
http://forum.xda-developers.com/showthread.php?t=333260
Mine is now 100% and I can go back to my real job!
Russ741
Griffy wiffy said:
I have a HTC branded TytnII and there is no PPT reg entry. Also the keys
From HKLM\Software\Microsoft\Shell\Keys
- Add a new key called "40C6"
- Add a string under the key called "Name" with the value "Button 6"
- Add a new key called "40C7"
- Add a string under this key called "Name" with the value "Button 6 (hold)"
already exist. So..
this didnt work for me. If i push the button on my BT headset it redials the last number.
Button 6 is the Voice command button near the wheel so i cant see how the BT headset button is going to work??
any help would be great as this is then only function missing from a great device.
cheers
Click to expand...
Click to collapse
I use a plantronic BT head set. To use VC on the tilt I hold the main button down on the head set until I hear the VC chime in. Takes about 4-5 of holding it down until VC kicks in. I hear about 3 or beeps during that time.
Russ741 said:
If anyone else is having issues with call announcements look here for the fix.
http://forum.xda-developers.com/showthread.php?t=333260
Mine is now 100% and I can go back to my real job!
Russ741
Click to expand...
Click to collapse
I can confirm that with the procedure in #1, along with the update CAB from the above link, I'm now getting incoming calls announced, too!
Procedure in #1 has been updated accordingly.
goestoeleven said:
I can confirm that with the procedure in #1, along with the update CAB from the above link, I'm now getting incoming calls announced, too!
Procedure in #1 has been updated accordingly.
Click to expand...
Click to collapse
@goestoeleven: did you not put in the registry change?
4. Lastly, you must modify this registry entry in order to use your Bluetooth headset with Voice Command:
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand Path = "\Program Files\Voice Command\VoiceCmd.exe
That's from your posting and I am pretty sure that is what really fixed my issue. I was using the older ver of MSVC with my wizard and it worked fine. So, unless there is something really different about the OS build on the Tilt, updating the MSVC may have improved on things but I still believe this reg key is what did it.
BTW: I loaded the updated MSVC before I tried the reg change and this ver of MSVC does NOT make that change for you!
I recommend you update post1 to include this step.
Great job on finding that key by the way! THANKS!!!!!!
Russ741
Russ741 said:
@goestoeleven: did you not put in the registry change?
4. Lastly, you must modify this registry entry in order to use your Bluetooth headset with Voice Command:
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand Path = "\Program Files\Voice Command\VoiceCmd.exe
Click to expand...
Click to collapse
This key is not necessary with MSVC 1.6 (it was with MSVC 1.5). I'm running just fine without it.
i still can not initiate voice command from my headset. everything else works fine. i hear announcements, i can answer and hang up phone calls (the voice quality is still horrible), i get reminders, etc. but when i press the button to activate, it just opens the phone app.
is there something missing?
goestoeleven said:
This key is not necessary with MSVC 1.6 (it was with MSVC 1.5). I'm running just fine without it.
Click to expand...
Click to collapse
Interesting, I tried a couple different copies of MSVC 1.6, including the CAB I used on my Wizard and didn't get announcements. It wasn't until I loaded the latest ver and put in the reg patch did it start working 100%. I admit I didn't test between the latest ver and the reg change (yeah I know I should have) so I can't say for sure which one did it.
Russ741
diar said:
i still can not initiate voice command from my headset. everything else works fine. i hear announcements, i can answer and hang up phone calls (the voice quality is still horrible), i get reminders, etc. but when i press the button to activate, it just opens the phone app.
is there something missing?
Click to expand...
Click to collapse
That's very odd, normally the part that fails (for me at least) is the announcements or ring tone to the BT.
Can you initiate calls from the MSVC mapped key on the phone? That will narrow down if the prob is with the BT, MSVC or the phone itself.
Russ741
yes...i push PTT and VC functions just fine. i'll try that final reg change again and i'll soft reset and see what happens.
EDIT: i still can't initiate calls from the headset, however, this change does seem to have solved the low volume problem for me. just got a call, i heard the caller loud and clear and they heard me no problem.
so one problem down, one to go.
M$ VC still not working properly
I followed step in posting 1 to the letter and everything worked perfectly including caller ID voice announcement over bluetooth. But,when I soft reset or turn my phone off, I do not get voice announcement over bluetooth anymore. HELP!
Thanks! I like this concept ... I'll try it on my AT&T Tilt Rom.
Inconsistent results on various BT devices
Works great on my Jabra BT500.
On my Parrot CK3100 I get the "button only works once" behavior described in another thread - everything is great the first time I initiate VC from the car kit, but after that the phone's speaker and microphone are the only things active.
Next time the phone and car kit connect I get one more button push that works.
Argh. I'll search that other thread again, but I don't recall a fix for the folks that had these probs w/their headsets. (Any pointers are of course welcomed!)
Richard
Thanks a lot. This worked perfect for me. I am using an AT&T Tilt with helmi_c's Kaiser AKU.0.7.0 Cooked ROM and a Plantronics Discovery 655 headset.
VC with wired headset
I have a wired headset (HTC brand) and installed Voice Command, but cant get it to work from the headset button...does anyone know how I can activate from the button on headset?
i guess its safe to say you went into MSVC SETTINGS AND CHANGED the settings to wired headset? there has never been an issue with wired headsets just BT
Hi all, I have a Bluetooth Car Stereo (A2DP) and to connect it is rather laborious with WM6 as you have to get into the Settings>Connections>Bluetooth screen, right-click the device, and 'Set as Wireless Stereo' every time!
I have not found a way to create a shortcut icon that will directly load the Bluetooth page. Can anyone help show me how? I assume it is a rundll command but am not sure how to do it.
Visit http://www.teksoftco.com section Freeware and download A2DPToggle
works a treat , only thing i had to do was re pair my headset for it to work .
Great thanks!