New Radio 1.15.00 - MDA III, XDA III, PDA2k, 9090 Software Upgrading

I found a new radio on the swedish qtek.se site today. BA_RRPT_Radio_11500.exe I put it on the xda ftp.

Any word about the improvements?

Just says that it improves the sound.

I upgraded, it shows 1.15.0, i havn't had a chance to use it so i dont' know if there is any changes but i don't seem to have a problem.

Is this for real? Also, where is the file?? Went to the ftp and I could not locate it.
Later...... 8)
fremar said:
I found a new radio on the swedish qtek.se site today. BA_RRPT_Radio_11500.exe I put it on the xda ftp.
Click to expand...
Click to collapse

So can those of us with WM5, upgrade the radio?

Found it, upgraded, and will report back tomorrow night.
Later
hdbueller said:
Is this for real? Also, where is the file?? Went to the ftp and I could not locate it.
Later...... 8)
fremar said:
I found a new radio on the swedish qtek.se site today. BA_RRPT_Radio_11500.exe I put it on the xda ftp.
Click to expand...
Click to collapse
Click to expand...
Click to collapse

Can't find the file. Can anyone point me the location?

I've converted radio to V1 format so anyone can easily change country ID.
NBF password is 0x20040523: (xda3nbftool -x Radio_.nbf Radio_.nba 0x20040523, etc)
It is in BlueAngel/Radio_Roms/Radio_1.15_Type_I/ba_radio_1.15_in_v1_format.rar on FTP
Installed it. It seems that sound volume is more loud during the call.
EDIT (MDAIIIUser) Moved file and corrected post

making nfb files
mamaich said:
I've converted radio to V1 format so anyone can easily change country ID.
NBF password is 0x20040523: (xda3nbftool -x Radio_.nbf Radio_.nba 0x20040523, etc)
It is in Uploads/Blueangel/ba_radio_1.15_in_v1_format.rar on FTP
Installed it. It seems that sound volume is more loud during the call.
Click to expand...
Click to collapse
nbf files are not working on 3 computers. all running windows XP it not allowing me to change the password. I believe there is more details needed in order to do it....i do it but the dos windows closes right away and im not sure if it worked or not...is there anyway to confirm that the file is fixed.
also the Cingular and ATT sticking...how do we fix that?

still could not locate the FTP. I can browse to ftp://ftp.xda-developers.com/BlueAngel/
But all the folders, I looked at, does not have the file.
Btw, is Radio version 1.15 for ROM 1.42 as well?
Thanks

ftp://xda:[email protected]_Type_I/86794-9090_radio_upgrade_1.15.00.zip is the file I uploded. On qtek.se it said that it was for the latest ROm, but the latest there is 1.40

I got a permission denied error message while accessing the FTP. Could you move the file somewhere to other folder?
Many thanks.

the files can be found here:
ftp://xda:[email protected]/Uploads/Blueangel/

Sorry i'm nubbio i don't remember. To upgrade radio'stack i have to hard reset my ba??? or it's possibile have it without reset??
Thanks

fremar said:
ftp://ftp.xda-developers.com/Blueangel/86794-9090_radio_upgrade_1.15.00.zip is the file I uploded. On qtek.se it said that it was for the latest ROm, but the latest there is 1.40
Click to expand...
Click to collapse
You should distinguish between main ROM, extended ROM and radio ROM. All 3 have different version numbers. This is the latest _radio_ ROM.
And upgraiding radio would not cause hard reset if you have WM5. Only clock settings would be lost and minor hardware settings like button lock. Older OSes would hard reset, but you can restore from backup and would lose no data.

Really thanks for answer mamaich, mybe noe it's time to test wm5, but i've read about always the same problem of non "stk" for wm5.
Any possibilities for future???
Regards

Signal strength seems to be improved with this radio ROM.

I agree that signal strength seems better. Thanks as always!
Steven

Can I use to upgrade my PDA2k??

Related

New TelecomMobile Harrier ROM WWE 135

I've just uploaded to a recently release WWE 135 upgrade from the TelecomMobile Harrier.
It's at:
ftp://xda:[email protected]/BlueAngel/Harrier H20A2/
I'm about to install it, but feel free to scrounge anything useful from it.
Update:
Old ROM:
CE 1.29.00
Ext ROM 1.29.118
Radio HA01_136
New ROM:
CE 1.35.00
Ext ROM 1.35.117
Radio HA01_141
Later'ish
Craig
does the old passwords works with this rom or it requires new. pls kindly specify.
thanks
jeet
Why don't you try it?
For CraigHumphrey this is a same operator upgrade thus he does not need tofix it but run the ship.exe
Craig
I have cooked your NZTelecom Harrier 1.29.118 WWE Ext Rom, you might want to look at it.
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_X_129118
I have renamed the file to stay with the current format and posted it back on the ftp site.
I have added it the Available Ext Roms page on wiki
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_Available_Ext_Roms
I have added the Harrier web update page to Available Upgrades in Wiki
I Have added the above update to Available Upgrades on wiki.
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
Would you please upload your 1.35 Exteneded rom to:
ftp://xda:[email protected]/BlueAngel/Extended_Roms/New_ROMS
Would you please post the Windows version and build Number reported by your device.
I know that you have no WIFI on the harrier, however it would intrest me to see if your 1.35 build would support it. Can you please check if you can find the following under \Windows:
WirelessMgr.exe
WirelessMgr.exe.0409.mui
WLanMgr.exe
Stk.exe
And post your answer.
Thanks
the old passwords dont work with the new pls any new passwords for this rom. it doesnt accepts the old passwords.
thanks
jeet
Hmm.. I had already replied to this, but it seems to have gotten lost, so here it is again
MDAIIIUser said:
Craig
Would you please upload your 1.35 Exteneded rom to:
ftp://xda:[email protected]/BlueAngel/Extended_Roms/New_ROMS
Click to expand...
Click to collapse
Done
MDAIIIUser said:
Would you please post the Windows version and build Number reported by your device.
Click to expand...
Click to collapse
Windows Mobile 2003 Second Edition
Version 4.21.1088 (Build 14132)
MDAIIIUser said:
I know that you have no WIFI on the harrier, however it would intrest me to see if your 1.35 build would support it. Can you please check if you can find the following under \Windows:
WirelessMgr.exe
WirelessMgr.exe.0409.mui
WLanMgr.exe
Stk.exe
Click to expand...
Click to collapse
None of those files exist.
Reminds me, I need to get a new WiFi card (the SanDisk 256MB + WiFi was unsupported).
Later'ish
Craig
Cooked the Ext Rom
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_Cooked131
Ran the
NZTelecom Harrier 1.35.117 WWE ERK_1.3x_002
Through the kitchen
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_X_135117
Interesting... Craig, could you please post the BT stack version/build after applying this update?
BT Icon -> Bluetooth settings -> About tab
mjb said:
Interesting... Craig, could you please post the BT stack version/build after applying this update?
BT Icon -> Bluetooth settings -> About tab
Click to expand...
Click to collapse
Bluetooth for WIndows CE
BT-PPC/PE Version 1.0.0 Build 3500.
Under the Advanced button, all components have the same version as above (1.0.0.3500).
Later'ish
Craig
The file is corrupt
I've downloaded it twice and still only comes to 22.9MBytes. WINRAR hates it. The executable won't unpack either.
I would like to get the HA01_141 radio to try on my XV6600. If anyone has a link to a good copy of this file... let me know.
Ehud
Re: The file is corrupt
gavron said:
I've downloaded it twice and still only comes to 22.9MBytes. WINRAR hates it. The executable won't unpack either.
I would like to get the HA01_141 radio to try on my XV6600. If anyone has a link to a good copy of this file... let me know.
Ehud
Click to expand...
Click to collapse
Which file is corrupt?
I downloaded it from here:
http://www.telecom.co.nz/content/0,3900,202143-203139,00.html
Then I had to do a couple of modifications to get it to flash using the magician patched flasher.
However, although it worked correctly with the Sprint EV-DO PRL for voice calls, the data connection was hosed.
It has some sort of special Kiwi customization in it . The #777 connection ends up with a password, even if I try to set it up from scratch (without running anything from extrom!). I remove the password and save the changes and then it comes back... it's obviously embedded in the HA01_141 radio ROM, and thus prevents my Sprint 6600 from connecting to #777.
The good news is that the Telstra and Verizon HA01_140 Radio_ roms do work for voice and data (although roaming isn't working).
Dan
Re: The file is corrupt
CraigHumphrey said:
gavron said:
I've downloaded it twice and still only comes to 22.9MBytes. WINRAR hates it. The executable won't unpack either.
I would like to get the HA01_141 radio to try on my XV6600. If anyone has a link to a good copy of this file... let me know.
Ehud
Click to expand...
Click to collapse
Which file is corrupt?
Click to expand...
Click to collapse
The one mentioned at the top of this thread on the xda-developers ftp site. The one Dan mentioned works just fine. Someone with write capabilities should replace the one on the xda-developers ftp site...
Ehud
done!
Downloaded of link
Uploaded to ftp
corrected link in wiki
why is the rom directory empty?
Guys, I know this isn't room for asking.... but, please help me with my Sprint 6600 Harrier.
I just upgrade the new ROM (WM6.1) to my PDA. But this is my stupidity, i installed the ROM that use for GSM device, while my device is CDMA.
How to rolled back to WM2003 or higher for may PDA. Pleade guys help me.... I've desperate for this... (
Thanks for your kindnes...
You cannot upgrade the Sprint or Verizon 6600 model to WM5 or WM6 or higher. No one has yet to be able to do it. I've tried many times. You need to flash your device back with a Sprint PPC6600 ROM. The GSM ROMs are not compatible with your GSM device.
You should be able to depress the reset button with your stylus while pushing in the power and top button on left side all at the same time (a three handed job). This will put you in Serial mode (you'll see "Serial") faintly on a blanked out screen. Then you'll hook up your phone via usb cable to your computer. Then the "Serial" will change to "USB". Then you'll click on the ROM and flash it back to your Sprint PPC ROM.
There are some hacks you can do with your Sprint PPC 6600 which greatly improve its performance. There's some great Stereo Bluetooth drivers and lots of other stuff. You can unlock the extended ROM and customize the device quite nicely. You can even modify your device to work on Sprints EVDO Rev 0 network. You'll have to search this website and the Wiki to figure it all out.
@ Rambo6: Thanks for your respon.
But, I have no WM2003 ROM to flash it back. Or i can do hack my device with stereo bluetooth and unlock the extrom for flash it back?
You need to flash back to an original ROM. You need to find a ROM for an HTC Harrier (Audiovox/Verizon xv6600 or Sprint PPC6600). UT Starcom used to have these ROMs on their website. Last time I looked they were not there. I have one of these on a harddrive somewhere.
Do some web searches and you can probably find it somewhere.

Looking for 1.40 ROM for PDA2k

Ok... I want to upgrade my PDA2k, but am a bit on the chicken side. Has anyone created or cooked a COMPLETE ROM for the PDA2k that they can post a download link to?
I can do the flash myself, but don't know how to cook a ROM and don't have the tools. I would appreciate any help I can get.
Thanks!
ROM Upgrade
Read this site. It's all here.
This FTP site has the ROM for Blue Angel. I used this one to upgrade my PDA2K. Works much better than the released version. Only problem is with sound after using the built in MS PocketPC CLOSE command; just don't use it, use another program like "Launcher" that has it's own CLOSE command which does not cause the problem.
Here is the FTP link: ftp://ftp.xda-developers.com/BlueAngel/BlueAngel_Roms/BA_1.40_radio_1.20_untested_extrom/
ChrisSpera,
Can you post a reply once you do the upgrade? I'd like to do it too, but I'm not as sure as you are on what to do. I also have a PDA2K from the US and would like to know how it goes.
Thanks,
Tom
Well, I got a little help from one of the patrons of this site, and I did get my PDA2k flashed with the 1.40 ROM, 1.12 Radio, and am working with a somewhat baked extended ROM. I've actually been tweaking it most of the day.
If you're using Cingular with your PDA2k, make certain that you grab the Cingular settings file from Club i-mate. You'll need those, as the settings in the SX66 ROM I used aren't quite right, though they work. Applications that automatically dial out via GPRS will not function correctly with the Connection Settings in that ROM. I am working with the guy that helped me to test the fixed connection settings, and when they are fixed, I'll let you know.
If you're using T-Mo, then make sure you get THOSE settings from Club i-mate and use those instead.
All is good, though! It works! I did have one hiccough, though; as my PC lost connection with the device BEFORE any flashing started. I bounced the box, leaving the device in the cradle, and was able to pick it back up from the beginning without any problems.
The device seems snappier. It connects to the PC faster, and boots faster. Pretty cool all told!
Thanks for the feedback! I hate to say this but I already started. It's been pretty slow in the office today, so I said...what the hell...and went for it. Wish I knew about the tmobile thing though. I'm just finishing the upgrade.
Where do I put the tmo information? Or, what do I do with it?
Tom
Chris,
What version is your extended ROM? Mine is 1.22.162 WWE
BTW, mine had the same problem with losing the connection. It's happened twice now. I updated my radio and the same thing happened. Strange.
Tom
I am using the SX66 1.40.110 (i think) version of the extended ROM.
If you go to the support area on club imate, and click on the Operator settings link in the support downloads area, you should be able to find a download link for a CAB that installs T-Mo connection settings. download it and use it to create your connections settings on your device.
I downloaded it and installed it. Didn't find it real helpful. I still had to go through everything to get mms and email setup. Oh well. Thanks for the tip though.
I've had it up and running for the past 24 hours and while I think the OS works a bit better I can't see a huge improvement. The phone is more responsive though.
Any notes on changes would be helpful. I did notice that the BT connects had a strenght signal now, which I find really helpful.
Question: Was this upgrade supposed to do anything to the extended ROM? Because the version is the same as before.
Thanks,
Tom
ChrisSpera said:
I am using the SX66 1.40.110 (i think) version of the extended ROM.
Click to expand...
Click to collapse
I just comprehended your post. Sorry about repeating the question when you already answered. How, or why, should I upgrade the extended ROM? I take it the upgrade I just did did not put the upgraded files in the extended ROM?
Tom
The extended ROM, which is about 16MB in size holds the custom software that comes on the device. You don't have to upgrade it at all. You can leave it be if you're happy with the software that's there.
Correct me if I'm wrong, but shouldn't the upgrade that was just performed by you and I install the new files into the ext rom automatically? Or, do I have to do it manually....copy the cabs from the laptop to the ext rom?
I've just been reading about cooking an ext rom and I'm going to give it a shot.
Tom
that depends on the files the update contained. Look for *.nbf files in the temp folder you launched the update from. What was in there? MS.nbf is the OS, radio.nbf is the phone and nk.nbf is the extended ROM.
I think I screwed something up. radio.nbf and nk.nbf were in the temp file but MS.nbf was not. Was it in yours? I believe I pulled the same file as you did from the link provided but there's no mention of it in there.
I also took a look at my extrom folder and none of the files that were listed in the link are in there nor loaded. I guess I'm getting things confused. Did you copy all the cabs into the extrom folder then run BAUpgradeut.exe? I just ran BAUpgradeUT.exe and thought they'd copy them over. I think I was wrong.
Tom

KJAM ROM on 9100 !!!!

yes this is real.
The KJAM rom, which can be found in the FTP of this site, is working on the Qtek9100 !!!
does anyone have any thoughts about that? is this ROM a better one than the 9100? I think it is!
From what I understand, The KJAM is slower with its rom then the QTEK. Because KJAM is full of apps which might not be needed. Once those apps are removed it should be exactly the same ( are the rom version numbers not the same )
ANyone have any views on this ?
I believe the ROM dates are different, with the K-JAM being 9/16/2005 and the Qtek at 9/22/2005. I don't know the difference between the two, but I'd be interested to find out. Also, I'm still trying to find out how to change the splash screens (HTC, then i-mate) when it boots, but it's different than previous HTC models so far (not splash?.nb).
As for the apps, the difference does lie in the Extended ROM, so once you've custom-tailored that area, they should be identical.
HOWEVER, people on HowardForums are complaining about the Bluetooth in the 9100, where K-JAM users don't seem to be having an issue. I didn't check up further on this, can anyone confirm?
Would yo umind sharing information about details? How to avoid device ID error? IS there hacked exe file? I need to flash my QTEK with IMATE ROM since I think BT performance in IMATE is way better.
TIA
bt on the qtek smells
Grill! Wake up and give us a clue,please!
I did the soft reset after the WM5 setup so that the crap wouldn't install and it works great
so what did you do?
imate rom on a qtek???
i got a vender error when try to install the k-mate rom on my qtek 9100. what´s the trick, that it work without the error? please help!
nice we have to get around that.
Anyone try to place the Wizard in bootloader mode first before running the upgrade utility?
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
BeyondtheTech said:
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
Click to expand...
Click to collapse
This one? ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
from here: http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
pimbo said:
BeyondtheTech said:
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
Click to expand...
Click to collapse
This one? ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
from here: http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
Click to expand...
Click to collapse
Hi,
I don't think this is the good way because I unpacked the "KJAM_WWE_ROM_1010903_104_10110_cdl_wwe_ship.exe" (rename to rar)
and I've foud the following files:
EnterBootLoader.exe
nk.nbf (74 MB)
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
I don't know which file have to change to "MaUpgradeUt_noID.exe".
Any idea?
THX
TB
Again, if I can find out how the NoID utility bypasses the check by comparing it with the original (does anyone have the exact file before it was hacked?), and we can compare, it'll be a start to look for similar code or text in the EXEs or DLLs of K-JAM's upgrade utility.
Find me the unmodified version of the NoID utility. Look on the FTP, and check all the other Blue Angel ROM update utility's EXE files...
thebiker said:
"KJAM_WWE_ROM_1010903_104_10110_cdl_wwe_ship.exe" (rename to rar)
and I've foud the following files:
Well
EnterBootLoader.exe
nk.nbf (74 MB)
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
Click to expand...
Click to collapse
Looks to me that somebody who knows howto and has this phone for testing could to edit the The ROMUpdateUtility.exe to bypass the country id errors,
And use as refference maybe the hacked no id loader for the BA.
P.s. the original MA upgrade utility should be found in the original roms from the providers of the Magician devices, we got it from them if i'm right.
Hope it helpes a bit,
I'm no developer, but this file sticks out in my mind..."RUUGetInfo.exe" If that is part of the upgrade installer then it looks to me that it is looking for the actual device ID, and it probably has to fall within a certain range to allow the upgrade to proceed. Something to the effect that each country, language or brand has a range. If your device isn't in that range, you are SOL.
With each generation they do something different, and more difficult.
Dave
i think it has to be in the ROM if not then all we have to wait for is a update from qtek and switch the nkf file
vbguru613 said:
i think it has to be in the ROM if not then all we have to wait for is a update from qtek and switch the nkf file
Click to expand...
Click to collapse
Nah, it's Much more involved than that. Just look at the process taken to develop the method to do it on the JAM, PDA2K, and so on. With each generation they make it more difficult.
Dopod 838 > K-Jam rom upgrade.. need some work
I had under my hands the Dopod 838 which is infact the cH version of the WIZARD.
I would like to load the imate K-Jam rom to the Dopod
Playing a bit with the machine, it seems that the Boot loader is actually looks like the Typhoon, the TyphoonNBFTools utility will decode the NK.NBF file but I am not sure what is the Vendor ID of the Dopod.
On top of it after altering the Languge from English to WWE and made the vendor DOPOD, the romupgrade utility reports the new version going to Prodigy and the Lang is English. it seems that although the TyphoonNBFTools was able to decode the NK.NBF, the upgrade application did not take the header information.
I did run also the Boot loader command under the MTTY (on the usb port) and command that did work for the typhoon "R2ds all" responded that I do not have the authority to dump the rom image.
Tried the command password WIZARD and although it did take it, still was not authorized to dump the rom image.
If somebody could help find a method to bypass the protection of rom , upgrade (bypass vendor , Country code...) it would be very helpfull to exchange roms.
:shock:
I've been playing with the ROMUpdateUtility.exe
Well, i've also noticed that the rom is like a typhoon rom.
Ive removed some strings to RUUGetInfo.exe(since this one seems to do the thing), but i cannot test it,
I got error 222, device not responding, (DUH, its a BA :lol
Maybe somebody can replace this file for the original in the folder and try running it. (if it passes the country id and the model no)
But it is a test, use at your own risk.
Do not blame me for anything.

Extended Rom Rom v1.6.x.x files keep coming back ?

When i delete the files inside my extrom, they keep returning after a soft reset.
I tried to delete them with total commander - > no success
when i unhide/unlock the extrom and delete them, again after a softreset they are back.
I also removed the "read only" attribute, but that doesn't do the job as well.. Also files wich i add are gone after a reset.
Anyone got a clue what to do ?
Hmmm...
I've been flashing whole day, trying different roms and
i found out that the 1.3.2.3 rom allows me to delete everything in the extended rom, but on the 1.6.2.2 (and 1.6.2.4) rom the files keep coming back.. very annoying situation :S
The same with me,
i have the 1.6.3.1 Vodafone Rom and i cannot delete any files in extended rom nor copy any file. Even all the unlockers ar of no help. It seems that this version is locked differently.
Haven't tried to flash a different rom yet.
Hmmm...
It must be a regsetting then i hope..?
If i've got time enough today i'll flash the 1.3 rom again and make a
registry backup.. after that i'll flash it again with the 1.6 and do the same
and then compare the registry's.
Maybe that will do the job
For me now is the time to quit looking for a way to write files in the extrom, i hope some genius ppcguru will find the way of the dragon
Eventhough there is a minor difference in the registry of both roms, changing the value's or deleting certain storagemanager keys doesn't do the job.
Just a matter of time i hope....
Edit
I compared the registry's of the 1.3 and 1.6 rom, and there are some differences,
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\TrueFFS1]
"Key"="Drivers\\BuiltIn\\TrueFFS1"
"Flags"=dword:00000004
"SoftwareWriteProtect"=dword:00000001
"AutoDPDMode"=dword:00000001
also strange, that if you "delete" files, the memory comes free for that session, and you can make use of the memory, but after the soft reset it still wipes all added content.
Maybe there's a file with all cabs inside that it restores on reboot ?
nmx77 said:
For me now is the time to quit looking for a way to write files in the extrom, i hope some genius ppcguru will find the way of the dragon
Eventhough there is a minor difference in the registry of both roms, changing the value's or deleting certain storagemanager keys doesn't do the job.
Just a matter of time i hope....
Click to expand...
Click to collapse
I have compared the boot.rgu of ROM 1.5.x device and 1.6.x device. I think the key to the problem should be the \windows\boot.hv file, which come from \windows\boot.rgu. IF we could change remove the "writeprotect" key in that file the protection should be gone.
ahlok_hk said:
I have compared the boot.rgu of ROM 1.5.x device and 1.6.x device. I think the key to the problem should be the \windows\boot.hv file, which come from \windows\boot.rgu. IF we could change remove the "writeprotect" key in that file the protection should be gone.
Click to expand...
Click to collapse
I could change it and it remained gone from the registry, that setting, but still, no effect ?
nmx77 said:
I could change it and it remained gone from the registry, that setting, but still, no effect ?
Click to expand...
Click to collapse
Which change have you made? the wizard registry or the boot.hv? i think both entry of sth link "softwriteprotect" have to be changed.
ahlok_hk said:
nmx77 said:
I could change it and it remained gone from the registry, that setting, but still, no effect ?
Click to expand...
Click to collapse
Which change have you made? the wizard registry or the boot.hv? i think both entry of sth link "softwriteprotect" have to be changed.
Click to expand...
Click to collapse
Probarly yes, i did it from the registry.. And not from het .hv.
Maybe the romediting tool from Mamaich
http://forum.xda-developers.com/viewtopic.php?t=34171 will do the job..
If i got time, i'll try to do that..
(if!)
nmx77 said:
ahlok_hk said:
nmx77 said:
I could change it and it remained gone from the registry, that setting, but still, no effect ?
Click to expand...
Click to collapse
Which change have you made? the wizard registry or the boot.hv? i think both entry of sth link "softwriteprotect" have to be changed.
Click to expand...
Click to collapse
Probarly yes, i did it from the registry.. And not from het .hv.
Maybe the romediting tool from Mamaich
http://forum.xda-developers.com/viewtopic.php?t=34171 will do the job..
If i got time, i'll try to do that..
(if!)
Click to expand...
Click to collapse
Just tried this way by modifing SoftWriteProtect value in default.hv, then flashing it back via aWizard, I am sorry it didn't work as we expected.
flexchen said:
nmx77 said:
ahlok_hk said:
nmx77 said:
I could change it and it remained gone from the registry, that setting, but still, no effect ?
Click to expand...
Click to collapse
Which change have you made? the wizard registry or the boot.hv? i think both entry of sth link "softwriteprotect" have to be changed.
Click to expand...
Click to collapse
Probarly yes, i did it from the registry.. And not from het .hv.
Maybe the romediting tool from Mamaich
http://forum.xda-developers.com/viewtopic.php?t=34171 will do the job..
If i got time, i'll try to do that..
(if!)
Click to expand...
Click to collapse
Just tried this way by modifing SoftWriteProtect value in default.hv, then flashing it back via aWizard, I am sorry it didn't work as we expected.
Click to expand...
Click to collapse
:shock: hmmmm... suxxx !
i might have a clue maybe
hey guys ived been flashing my mda all night i was playing around with the rom that button uploaded and i wanted to test the extendend rom combination with the wwe 1.6.7 extended rom files with the one button uploaded and all of sudden i cant remeber which cab i ran that rehid and relocked the the extended rom and on a supposedly lock free upgraded rom which button said that is to be free of this security feature found on the wwe 1.6.7 rom had and before i ran the cab it was unlocked. it mite of been a fluke but for just incase iam mentioning it
Extended_ROM
Hi all!
did anyone tryed roll-back to an old ROM and then delete and copy a new ExtROM to device and apply the last ROM in next?
thanks,
Atary
Still a problem or a soulution available?
Still a problem I geuss, at least based on the forum contents.
What could also be used is a ExtROM backup and edit (like the ER2003Edit for Himalaya I used to use) util.
Hopefully it should not be to difficult for the guys that made aWizard: Buzz_lightyear, machinagod, loki and ahlok_hk
edsub said:
Still a problem I geuss, at least based on the forum contents.
What could also be used is a ExtROM backup and edit (like the ER2003Edit for Himalaya I used to use) util.
Hopefully it should not be to difficult for the guys that made aWizard: Buzz_lightyear, machinagod, loki and ahlok_hk
Click to expand...
Click to collapse
Didn't find a way yet...
but sure it won't take that long anymore...
(or, i hope )

AKU2.3 PDA Mobiz Edition

For all who's interrested I've here the Mobiz Edition with some extra features.
ftp://xda:[email protected]/Up...22410101_TMobile_WWE_PDAMobizEdition_v120.exe
for more details, look at:
http://www.pdamobiz.com/forum/forum_posts.asp?TID=60589&PN=1
yea, a translation may be fine
I think the screens tell enough.
I will tell more later after I tested it.
In short, this one has:
*realplayer installed
*Contacts Backup
*GSFinder+
*Image Maker
*Mx Calculator
*Note M (MP3 Voice recorder)
*Opera Browser
*TRE Registry Editor
*a Stopwatch
* Media Player (not windows)
*vx Utility
*Xn View
*OMAP overclock
*SMS Backup
*Pocket RAR
also the GPS reg is already changed
+ some other helpfull shortcuts like:
Reset
SMS Sender
Recent Dial
etc.
regards
damn which ver to run! aku 2.3 mr clean.. 2.24 t-mob or now this ver! arg decisions decisions!
I had/have all 3 variants on my Wizard and like this one best.....
............Up until now.
but in reality i could just install these apps myself right?
jacob-mda said:
but in reality i could just install these apps myself right?
Click to expand...
Click to collapse
Yes, you can always install apps manually.
then poo no need in wipeing my settings out i dont really think i need these apps neways but if i did where could i dl them or is there a way to extract them out of the .exe?
After installing this ROM, I can no longer flash to other ROMs. During the ROM flash wizard, and after the phone does the initla reboot to the multicolor screen, the update fails and the installer immediately goes to recovery mode.
Has anyhone else seen this, and is there a fix?
mskovrinskie said:
After installing this ROM, I can no longer flash to other ROMs. During the ROM flash wizard, and after the phone does the initla reboot to the multicolor screen, the update fails and the installer immediately goes to recovery mode.
Has anyhone else seen this, and is there a fix?
Click to expand...
Click to collapse
I would try downgrading to the stock T-Mobile 1.08 ROM and then you should be able to upgrade to whatever ROM you want. If you can't even downgrade I'm not sure what you can do.
mskovrinskie, I've tried to Update my ROM, I managed without problems so I guess it's your phone or software causing the problems.
I used the original Qtek 2.17 update.
I personally think this ROM rocks. Ran the Cingular Connection cab from the shipped ROM and not much else. SmartsKey and Omap were already installed along with the other neat things Vilem referenced.
Seems very fast and stable but then again all I run is MS Voice and Adobe Reader as even the newest ClearView is too lacking for my needs. And most cool is that the big button dialer skins seem to work without the wierd graphics, etc I experienced with previous versions.
Just my two cents ...
Steven
chow
Link working
Everytime I click on the link I get the cannot find server page.... any ideas?
Vilem said:
For all who's interrested I've here the Mobiz Edition with some extra features.
ftp://xda:[email protected]/Up...22410101_TMobile_WWE_PDAMobizEdition_v120.exe
for more details, look at:
http://www.pdamobiz.com/forum/forum_posts.asp?TID=60589&PN=1
Click to expand...
Click to collapse
will this work with the 8125 and still let me use that SIM card for my calls? if so, what is the advantage to this over the others? thank you very much.
Yes it will work with a 8125.
Up untill now I still like this update the best.
Philly, try copy link location, then delete the file so you go directly to the directory.
Vilem said:
Philly, try copy link location, then delete the file so you go directly to the directory.
Click to expand...
Click to collapse
If you mean ftp://xda-developers.com/Uploads/Wizard/Roms/ there are
2 directories and 1 file
TMobile directory
Xelencin directory
2.17 radio only file
TMobile directory doesn't contain file.
Please adise.
ftp://xda:[email protected]/Wi...22410101_TMobile_WWE_PDAMobizEdition_v120.exe
They moved the file, it's now here.
Thanks

Categories

Resources