Related
Hi!
I am having problems with my trinity and I need to send it to customer support, so I loaded SSPL and flashed back the original ROM as described here.
The problem is now, that at startup, red numbers still appear as shown in the attached picture. I am pretty sure that these numbers were not there before I upgraded to HardSPL and WM6 (bepe WM6 ger 0.79). When I enter the boodlader manually, it says "SSPL". What went wrong? How can I get rid of these numbers and return original device state?
PS: The reason why I need so send my trinity back to HTC is, that the device often crashes at startup or during runtime and the screen freezes with some graphical errors, which can also be seen on the attached image.
i think that numbers appear in the original bootloader, i remember that...
Hmm, I thought the numbers first appeared after switching to Hard-SPL, but maybe I am wrong. Can anymode else remember the initial state, or has anymode send his device to HTC with the numbers shown at startup?
staubsaug said:
Hi!
I am having problems with my trinity and I need to send it to customer support, so I loaded SSPL and flashed back the original ROM as described here.
The problem is now, that at startup, red numbers still appear as shown in the attached picture. I am pretty sure that these numbers were not there before I upgraded to HardSPL and WM6 (bepe WM6 ger 0.79). When I enter the boodlader manually, it says "SSPL". What went wrong? How can I get rid of these numbers and return original device state?
PS: The reason why I need so send my trinity back to HTC is, that the device often crashes at startup or during runtime and the screen freezes with some graphical errors, which can also be seen on the attached image.
Click to expand...
Click to collapse
What numbers do you see, if you step manually to bootloader?
fktsndr said:
What numbers do you see, if you step manually to bootloader?
Click to expand...
Click to collapse
TRIN100
IPL-0.50
TRIN100
SPL-1-07.0000
agreed
Flashed the same bepe version and it shows up same screens - trying to switch to another ROM (pref. the LIT), for too many drop out issues with the german bepe 0.79 (esp. with TT6 and Dialer) but cannot even get it to run the vodafone WM5 again - due to a broken cable, as I realize now - ok, we´ll see how far the LIT will LEAD
I have an original device with WM5, not yet upgraded, and I have the same red numbers.
staubsaug said:
TRIN100
IPL-0.50
TRIN100
SPL-1-07.0000
Click to expand...
Click to collapse
Everything is ok, this is the original HTC ipl and spl!
okay, thanks! I am going so send my trinity back to htc then.
Hey!
I'm going to give my P3600 back to the support service to have it fixed (as usual the black paint is peeling out very quickly from the bottom and the side). My phone is unbranded and I can't find the original ROM I downloaded from the HTC web site.
Do you know where I can find the original italian ROM for HTC p3600?
Anybody have it?
Thanx.
Everything went well and I received a brand new trinity today.
gepino77 said:
Hey!
I'm going to give my P3600 back to the support service to have it fixed (as usual the black paint is peeling out very quickly from the bottom and the side). My phone is unbranded and I can't find the original ROM I downloaded from the HTC web site.
Do you know where I can find the original italian ROM for HTC p3600?
Anybody have it?
Thanx.
Click to expand...
Click to collapse
beware : read the wiki could be helpfull for your knowledge...
staubsaug said:
Everything went well and I received a brand new trinity today.
Click to expand...
Click to collapse
Good ....
HI , friends i been trying to sim unlock my new tytn2 which is in uk orange network now.
I tried to install hard spl, i m new to this technical worlds like cooked rom, new hard spl etc ,.any one please tell me how to do this step by step,
When i tried to install hard spl, there comes a tricolor screen first white screen with progress bar 0% , and after some time it stucks and in pc shows error message. tried with jump spl method described by some one, in the kaiser section, what is the meaning of wm6 and wm6.1
Following are the details of my phone
R 1.27.12.29
G 22.45.88.07H
D 1.81.00.00
KAIS130
SPL-1.81.0000
CPLD-8
What should i do to get my phone unlocked, plz help i assure 5 pounds to the one who has time to help me in this. cheers friends.
WM6 and WM6.1 are Versions of Windows Mobile, see Settings, About on your phone.
Looking at the Radio version, you are a WM6.0 user still.
To install Hard SPL read here: http://forum.xda-developers.com/showthread.php?t=334679
If you get a white screen, read here: http://forum.xda-developers.com/showthread.php?t=354061
Once you have Hard SPL complete, you can SIM Unlock, read here: http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=2572785
I suggest you read here Getting Started and on the XDA Wiki, there is lots of information on the HTC Kaiser page that covers the basics.
It is appreciated to search and read before posting new threads when the information is already available. If you get stuck with one part, re-read the thread, search for your problem, and then (and only then) post in the thread you are trying to follow.
Thanks
Dave
thanks dave.but i tried it, i couldnt even install hard spl, i dont know what happens when i run jumpspl also it shows white screen no further actions takes place. i dont know what to do now.
pappoos4u said:
thanks dave.but i tried it, i couldnt even install hard spl, i dont know what happens when i run jumpspl also it shows white screen no further actions takes place. i dont know what to do now.
Click to expand...
Click to collapse
Try SSPL First, then JumpSPL 1.56, then JumpSPL 1.93. one should work.
Ta
Dave
pappoos4u said:
...i dont know what happens when i run jumpspl also it shows white screen no further actions takes place...
Click to expand...
Click to collapse
Dave's second link above says "If you get a white screen..."
Hi everyone,
I try update my windows 6.0 to 6.5 yesterday, i fallow all steps and during the update, when the update is in 16% a error happen. I try user the recovery but doesn't work, and now when i start my phone, show the tri-color screen and stay.
What i can do to fix this?
Important remember, i need to use the jump spl 1.93 to get out of the white screen for update the windows.
Thanks all.
Charlles said:
Hi everyone,
I try update my windows 6.0 to 6.5 yesterday, i fallow all steps and during the update, when the update is in 16% a error happen. I try user the recovery but doesn't work, and now when i start my phone, show the tri-color screen and stay.
What i can do to fix this?
Important remember, i need to use the jump spl 1.93 to get out of the white screen for update the windows.
Thanks all.
Click to expand...
Click to collapse
Reflash your original carrier rom. from the tri-color screen.
Since WM 6.5 has not and will not be released for the Kaiser, I am assuming that you are trying to flash a custom 6.5 rom, and have followed all the steps described here:
http://forum.xda-developers.com/showthread.php?t=433835
I try install this ROM: http://forum.xda-developers.com/showthread.php?t=397121
Sorry, my english is very bad.
"Reflash your original carrier rom. from the tri-color screen." What do you mean?
Thanks
Charlles said:
I try install this ROM: http://forum.xda-developers.com/showthread.php?t=397121
Sorry, my english is very bad.
"Reflash your original carrier rom. from the tri-color screen." What do you mean?
Thanks
Click to expand...
Click to collapse
Did you follow all the steps in the link I gave you above before you tried to flash the Hyperdragon rom ?
What I mean is to find the original rom that came with your phone, in the Kaiser Wiki and reflash that on to your phone.
How can i know what is my original rom?
I remember, the visual is like this: http://pdadb.net/img/htc_tytn_ii.jpg
thanks
Charlles said:
How can i know what is my original rom?
I remember, the visual is like this: http://pdadb.net/img/htc_tytn_ii.jpg
thanks
Click to expand...
Click to collapse
Where and when did you get your phone and who is the carrier ?
I from Brazil, the carrier is CLARO, i buy of a friend in this month, i have no idea when he buy.
In the box of the phone, is write: "Windows Mobile 6 Professional"
have another way to fix this?
What is the built of your tytn II i.e. its HTC TYTN II or AT&T Tilt ???
if its of HTC then try to update the latest rom 6.0 or 6.1 with radio (as both are official) of HTC available on kaiser wiki page and vice versa for AT&T Tilt.
Hope it'll sort out ur problem.
Cheers
kashifmehmood said:
what is the built of your tytn ii i.e. Its htc tytn ii or at&t tilt ???
If its of htc then try to update the latest rom 6.0 or 6.1 with radio (as both are official) of htc available on kaiser wiki page and vice versa for at&t tilt.
Hope it'll sort out ur problem.
Cheers
Click to expand...
Click to collapse
htc tytn ii
A try a lot, and usualy the errors bellow happen:
ERROR [294] : INVALID VENDER ID
ERROR [262] : UPDATE ERROR
If help, what show in the screen is:
RUUNBH
KAIS120
SPL-1.94.0000
CPLD-8
USB
You need other information?
Thanks
Fellas,
I read in another topics, and i think this error happen because i don't have the HardSPL installed on my HTC TyTN II.
Now the question, how i can install HardSPL with my phone frozen on the tri color screen?
How can i know if HardSPL is install on my phone?
Thanks.
hi...
i need some help here...
i'm using kaiser TYTN 2...
WM 6.1
ROM ver. : 3.29.707.0
radio ver : 1.65.16.25
protocol ver : 25.83.40.02H
any ROM i can flash now (i want to upgrade my phone, so slow)
how to flash ROM?
can i upgrade to WM6.5?
Read this first
http://forum.xda-developers.com/showthread.php?t=433835
This will tell you everything you need to know. You will need to flash HardSPL onto your phone first then you can start flashing radio's and rom's till you find the one you like.
Blinky
Blinkydamo said:
Read this first
http://forum.xda-developers.com/showthread.php?t=433835
This will tell you everything you need to know. You will need to flash HardSPL onto your phone first then you can start flashing radio's and rom's till you find the one you like.
Blinky
Click to expand...
Click to collapse
sorry...what mean by stuck on bootloader screen?
is mean my phone stuck at when i start-up my phone...
or stuck at the 4 colour screen with SPL version?
for my phone...
it just stop at the 4 colour screen with SPL version 3.29..
and i need to use stylus press the reset button to restart it...
is this mean need to re-flash my SPL?
All reqd info avail through search
jordanjoker said:
for my phone...
it just stop at the 4 colour screen with SPL version 3.29..
and i need to use stylus press the reset button to restart it...
is this mean need to re-flash my SPL?
Click to expand...
Click to collapse
If that's all you can get from your phone then indeed it's at the bootloader screen. Try reading the Kaiser Stuck at Bootloader (aka Tri Color or Red, Green, Blue Screen)? Solutions Here thread - took me about 20 s to find using search. ALL the info you need is here if you browse the wiki thoroughly and search. Good luck with your searching and reading up!
I've been lurking with the XDA forum for quite sometime now and its my very first posting and I'm having difficulties finding answers on search box I just simply give up looking for appropriate answer to my question. Since I like to use the good old Winmo 6.1 rom (Davideuck_V-7_MSVC to be exact)my bad is I forgot to SPL to earlier version 1.15 so got a green kinda thing on my screen, so I apply Restore_Stock_SPL_115 and everything went fine. (I know I'm stupid ) Unfortunately after I update the Time and Date it suddenly appear " This concludes the beta test for this software release....... blah, blah,.... guess what? its a time bomb can't do anything on screen but to reset. So I decide to re-flash it again but I got stuck at 0% on bootloader mode and got Error 262, I tried to understand whats the meaning of it and I did, but never got any solution how? I tried to flash it with HSPLWrapper_Blackstone_156OliNex to restore Winmo 6.5 but I got stuck again on 0%. something unusual I tried to reflash more roms and it didn't work. All the Roms I've wont reach 1% Even flashing on SD card trick wont load. And my spl ver 1.15 can't flash anything. So I that's why I need your help desperately...
Near enough the exact same situation as me! I think that 1.15 file may have issues.
wayneroughneckz said:
I've been lurking with the XDA forum for quite sometime now and its my very first posting and I'm having difficulties finding answers on search box I just simply give up looking for appropriate answer to my question. Since I like to use the good old Winmo 6.1 rom (Davideuck_V-7_MSVC to be exact)my bad is I forgot to SPL to earlier version 1.15 so got a green kinda thing on my screen, so I apply Restore_Stock_SPL_115 and everything went fine. (I know I'm stupid ) Unfortunately after I update the Time and Date it suddenly appear " This concludes the beta test for this software release....... blah, blah,.... guess what? its a time bomb can't do anything on screen but to reset. So I decide to re-flash it again but I got stuck at 0% on bootloader mode and got Error 262, I tried to understand whats the meaning of it and I did, but never got any solution how? I tried to flash it with HSPLWrapper_Blackstone_156OliNex to restore Winmo 6.5 but I got stuck again on 0%. something unusual I tried to reflash more roms and it didn't work. All the Roms I've wont reach 1% Even flashing on SD card trick wont load. And my spl ver 1.15 can't flash anything. So I that's why I need your help desperately...
Click to expand...
Click to collapse
If you are getting an Error 262, you need to run manual sspl in order to resolve this. Read this post for the steps (post #2) and sspl tool (post #1) - http://forum.xda-developers.com/showthread.php?t=505377. You can also get all of the steps needed to successfully flash. if you have questions, please post them in that thread.
It seems when I restart my phone normally, I noticed that the message about " This concludes the beta test for this software release....... blah, blah" the manila interface was behind it when I press the task manager and the volume buttons it responses means its not bricked (hope so) maybe the reason why I cant flash anything? Or whatever...Well that's my observation..... Please guys I needed my phone badly tomorrow
Did you not read my post . You can flash another rom, error 262 is common. You just need to use sspl before flashing to hspl 1.56.
if ur stuck with hspl and cant flash that than try uspl or try stock rom.... they get installed without hspl or uspl installed.... its available in the blackstone wiki section
and with stock rom get through tomorrow . than try hspl or uspl with custom rom later on when u have free time
Upgrade the ROM with latest official HTC release it upgrades the bootloader to ver 1.54 as well. Then you can install the newest version of HSPL or just use USPL to flash whatever cooked ROM you want.
Apologies on replying again here instead of posting on the designated thread , but forgive my innocence the thread says "" launch SSPL-Manual.exe from attachment, run it, wait until 1.07.OliNex tricolour screen says "USB" on it, then run the HardSPLWrapper_Blackstone.exe on the PC. "" how exactly that's going to be done? Currently I got the tri-color screen saying SPL-1.15.0000 and a USB on the bottom and when I flash either hspl or uspl I always end up on gray screen with a 0% that doesn't move at all, how can I manually apply SSPL? I cant access Manila interface because of time bomb message? My life's getting complicated!
If possible try flashing from an XP box, Vista/7 might give you some additional trouble if you don't use the right drivers. But if you get to the 0% screen, the issue shouldn't be with the SPL... so don't worry, I doubt the phone is bricked
So: try XP and/or using the drivers provided in the Flashing-thread
zerozed said:
Upgrade the ROM with latest official HTC release it upgrades the bootloader to ver 1.54 as well. Then you can install the newest version of HSPL or just use USPL to flash whatever cooked ROM you want.
Click to expand...
Click to collapse
I tried the Official one Blackstone_WWE_1.56.405.1 and got Error[294] Invalid Vendor ID
wayneroughneckz said:
I tried the Official one Blackstone_WWE_1.56.405.1 and got Error[294] Invalid Vendor ID
Click to expand...
Click to collapse
Did you downloaded the ROM from the HTC site? If the ROM is from the official site try again using USPL.
I seach the wiki page and found the latest version which is "Blackstone_WWE_1.56.405.1" and I can't find it on the official site, it should be "WWE" not specifying on certain countries, so I manage to download it from Rapidshare link. and for the SSPL I don't think I can do that coz I can't access my phone coz it has tim bomb probably the main culprit here.
Any flashing problems should be posted in Dummies Guide thread.
Thread closed