Database Develop

TyTN II Problems

There seems to be a problem with the Kaiser. After finishing a phone call on the Kaiser the backlight goes off and stays off and I cannot access the Start menu. I can access all other functions but backlight stays off and one still cant get into the Start menu from anywhere on the screen. I have to press the power off button quickly once and then wait a second, press it again to be able to access the start button or the light to come on. This is definitely a bug in the tytn II and I hope HTC is doing something about this.

I have experienced the same thing.
After the phone call. I did not hang up.
Instead the person at the other end hangs up and I tries to navigate away then the phone appears to lock up.
Could not turn the phone off either. Had to wait until the phone turned itself off. Once restarted everything ok...

sudo009 said:
I have experienced the same thing.
After the phone call. I did not hang up.
Instead the person at the other end hangs up and I tries to navigate away then the phone appears to lock up.
Could not turn the phone off either. Had to wait until the phone turned itself off. Once restarted everything ok...
Click to expand...
Click to collapse
I noticed this as well...
pretty crazy.

Hmm I haven't that problem. Danish HTC TyTN II

Do you folks have the password set? I have heard that that can cause this problem. Try to turn off password checking.

Hi @ All, any news about that problem?

I have a solution
I had the same problems and after installing all the ROM's and still have the same problems, I found out that the problem is not in the ROM it is in the 3G network, disable the 3G network and set it to GSM and all the problems will disappear.

This was nothing to do with 3g.
It was a pre-programmed fast sleep setting that was flawed. Download Kaiser Tweak and turn off all the sleep during call options.

Difference in memory in use
I have problem with my TyTN II, I don´t know why, but when I control the state of the memory in use, it seems to be 112 MB in use and 19,4 MB free. But when I control every item (Applicationdata, Confimgr, ProgramFiles etc., even including hidden files) and calculate total then it seems to be only 45 MB in use. Can anyone explain this
thanks

Tilt Freezes after the screen goes blank.... sometimes

Hello
I am a newbie here so hopefully I don't screw up to bad. My tilt will freeze sometimes after it has been in what I call Hibernate (screen turns off after 30 secs or so). What is odd is if I slide out the keyboard it will change from portrait to landscape but I can't make anything happen when I touch the screen. If I soft reset the device it works fine. Please help, I really don't want to do a hard reset.
Thanks
Garry

That happens to me sometimes too. You're lucky you can soft reset, I have to take off the battery for it to reboot.

Yeah, I thought it might be the cube, which I unistalled but I am sure it is something I have installed..... Just not sure what so when/if I hard reset. I know not to reinstall it.

I've had this problem as well, with the stock AT&T ROM on the Tilt. The phone inexplicably will not wake up. Soft reset will successfully restart the phone (for me).
When the phone is essentially "locked up", it will not receive calls - which sucks.
Playing with the settings, I (maybe) lessened the frequency of such lockups by increasing the Today Timeout to 12 hours (maximum). I don't know if this did it, but I've only had one lockup since - rather than two to three times a week.
I'm new to PDA type phones and WM6, so I don't know much - but maybe this will help you guys. It may also be complete coincidence on my end. Who knows?

[email protected] said:
Hello
I am a newbie here so hopefully I don't screw up to bad. My tilt will freeze sometimes after it has been in what I call Hibernate (screen turns off after 30 secs or so). What is odd is if I slide out the keyboard it will change from portrait to landscape but I can't make anything happen when I touch the screen. If I soft reset the device it works fine. Please help, I really don't want to do a hard reset.
Thanks
Garry
Click to expand...
Click to collapse
I had the same problem with evey ROMs.
But since I don't use HTC home and HTC close program this kind of freezing disappeared.
I don't know which one caused the problem or wich version.
Try Spb Mobile Shell or Spb Pocket Plus for today screen. They are free to try.
It's a shame because I loved the looks of HTC programs.

Tilt flashs off when you hit the power button - AT&T WM6.1

So I have the new official AT&T WM 6.1 ROM. When I hit the power button most of the time the screen turns on but quickly turns back off. When I hit the power button again it stays on. Anyone know how to fix this?

Same exact thing happes with mine when i take it out of standby with the power button. This never happened with 6.0 and just started with 6.1

Me too. But, does not happen every time.

No clue how to fix it here; just adding my voice to the chorus. I thought it might have been because I finally dropped mine. Now I guess it might be something with the 6.1 AT&T ROM.
Second thought: It's not consistent with mine either. It seems to happen more often when my phone has been "off" (read: in standby) for a while.

Mine seems to be inconsistent and more likely to happen if it has been in standby for a while as well . Does anyone with a tilt with AT&T WM6.1 not have this problem?

This issue was introduced in one of the recent AT&T builds before it became official. There is no known fix right now.

This problem is really annoying. Any fixes yet?

mine is 6.1 and do something like that:
when the phone is on standby, and I press the "power" button so it awakes, the screen turn on, then off and go on again by it self, this happens EVERY time but only when the phone its locked. I try it a few times with the phone unlocked and it didnt happend. By un lock i mean the screen and buttons lock.
Something that I've notice, is than, when my phone was 6.0 and I click the "lock" button, the screen DIMs automaticaly, and since I upgrade it to 6.1 it doesnt dim , I lock it, and the screen stays on and exactly the same brightness. I dont know If I have to setup something on the phone to dim when its locked or what, i just cant find it...

upssssss, 2ble post...

ranger47 said:
So I have the new official AT&T WM 6.1 ROM. When I hit the power button most of the time the screen turns on but quickly turns back off. When I hit the power button again it stays on. Anyone know how to fix this?
Click to expand...
Click to collapse
I upgraded to 6.1 yesterday and have the exact same problem. It is very annoying. I am using the Official 3.28 version of 6.1. I have also tried version 3.34 but still get the problem.

still no solutions?

Upgraded to Mobile 6.1..Power button issues?

Just upgraded to WM 6.1 and love it but it seems that I have to press the power button a few times to turn on my Tilt. Is this an issue or just my phone?
Is there anything else I just add to take advantage of the 6.1?

Mine blinks sometimes, or doesnt come on with the 1st press. MANY others seem to have this issue.

I had this issue using ROMeOS v4.5.3 release. I upgraded to ROMeOS v4.6 and the problem went away.

I never had this problem until I tried to use SPB Diary. And what was happening was that the program was so slow to fire up, if I hi the button I was usually impatient and would hit it again too soon and it'd turn on/off.
If I hit the button and left it for 3+ seconds it'd usually turn on.
Needless to say, I uninstalled it. It would be an okay stand-alone program, but it's too slow for the Today screen.

Mine just blinks once in a while (Official Orange 6.1 ROM).
Not sure if its a third party issue though.

This is a known issue but I thought it only affected the AT&T 6.1 ROM and cooked ones based on it (e.g. NATF's). Holding the power button for 1/2 second as opposed to just tapping it seems to be 100% effective. After a while you get used to turning on the phone that way. Hopefully a real fix is coming.

I have the same problem too - ^ good looks on the quick fix blue_94_trooper.

Phone freeze after a call

Hi,
I wonder if I'm the only one having this issue...
sometimes, after a call, the phone freezes and I have to press the Home key to get the TF3D screen back.
But after that, I can't make a new call... nothing happens when I press the "Call" button or when I try to launch the dialer by pressing on the "Phone" soft button.
I try to launch the FdcSoft TaskMgr (wm2005_3.1) in order to see if a process was stuck, it usually loads fast but in this case, it stops loading and nothing was displayed... (I'm still able to see the TF3D background instead of TaskMgr).
Only way to recover from it, is to SR the device...
I switch off the device each nights, I would expect more stability, it's not like I'm running it for more than 2 weeks...
This issue always occurs (when it does) after a call or when I press the hard key "End call".
Oh, funny thing... By 3 times, I was also unable to end a call, the call was still running and I had to SR the device to end the call... very nice !
Anyone with this issue or with an idea ?
It's the only thing that drives me crazy with this phone :|
Rom : 1.93
radio : BS14 currently, but it was the same with previous radios.

is there anybody with a little clue for me ?
Please

Me too.
Panosha: 1.93.405.1 WWE Shine On 2.4 Full
Radio: 1.03.25.18
After calls... Freezes 80% or more. I don't know if maybe it is 100% of the time when the other end hangs up first. (I don't get it with Voicemail!)
I also get freezes some other times. I don't think it is memory related, (before someone suggests it.) Also Please don't tell me to Hard Reset. I have Hard resetted to my heart's content, also directly after every Rom Update (to get GPS working)

try soft reset......i also got that problem....i do a soft reset,works fine...
cheers!?!!!