Related
after the today timeout wm5 doesn't remember the status of buttons lock.how can i set it to default?
if this is only mine bug please tell me
this is the first time i hear it... i think (and i repeat that I think) that it is a problem at your end and you may have to re-install...
please, this is my opinion, am not a pro, thats just an opinion...
i've temporanely solved this issue disabling today timeout..i don't want to lose all the data and settings
Hello, I've recently set up ActiveSync for 15 minute intervals during peak time. I set "Vibrate" for New E-Mail Messages. Usually it vibrates for a few short bursts, but at least once per day the vibration motor freezes up and won't stop vibrating until I press the power button. The only other recent change to my settings was that I installed Bandswitch to keep connected to the Edge network and disconnect after 120 seconds. I don't know if this change is related to the vibration problem. Anybody have any suggestions?
if you have Magic Fingers installed, you might try uninstalling it
thanks for the advice, but I don't have Magic Fingers installed
hey. weird cause i used to have the same issue before, my phone whenever it received an email it would not stop vibrating until i removed the battery. lol weird i know. r u using the stock rom? ever since i changed rom's from stock i havent had that problem before.
try flashing ur rom to an upgraded att or htc rom, maybe it would solve ur issue as it did to me
best of luck
I have the exact same issue with incoming emails. For now I have turned off notification. Configuration is pretty generic.
This happened to me...
This happened to me once with the stock ROM. I have since upgraded to the leaked AT&T Tilt ROM and it hasn't happened since.
Any Hints?
MadMatt- Any hints about where to find the "leaked" ATT Tilt ROM ?
ATT Leaked ROM
benmorris said:
MadMatt- Any hints about where to find the "leaked" ATT Tilt ROM ?
Click to expand...
Click to collapse
Here you go...Hope this helps.
http://forum.xda-developers.com/showthread.php?t=341886
One more
I also have this problem, but its not with every e-mail. I receive between 10 and 20 e-mails a day and the continuous motor only happens about once every other day. I'm also on the stock ATT ROM. Anyone figure out what's going on with this?
emmit said:
I also have this problem, but its not with every e-mail. I receive between 10 and 20 e-mails a day and the continuous motor only happens about once every other day. I'm also on the stock ATT ROM. Anyone figure out what's going on with this?
Click to expand...
Click to collapse
I'm glad I'm not the only one.
this issue is a bummer
oh yeah this is becoming a real pita
Me too...
Using Blackberry connect on stock ROM on Tilt, new messages occassionally cause a constant vibration until I hit the power button.
Would love to know how to stop this,
ncdave
In my experience I have found that this is caused by the device being forced to do something, i.e. check email, recieve email, before the device is fully "awake". The solution for me was acheived through the use of kaiser tweak. This also means there's a registry mod. for it as well, unfortunately I left my Kaiser at home today. If ylou change the device wake up to something more acceptable such as 15 seconds or 30 seconds instead of the 1 second default you may find this fixes your problem as it has for me!
If you did that, wouldn't you stand the chance of missing most of your phone calls while the phone is sleeping?
Hi,
I'm sorry if this has been asked before, I tried searching but didn't come up with anything relevant. The problem is, today screen's calendar is not updating anymore (e.g, it's 4 pm but it's still showing appointments for 8 am). I have to soft-reset to correct this issue. I think that the problem started after I installed PDAVIET phone skin to correct the "answer with hw buttons" issue, but I'm not sure. Has anyone else experienced this?
Ok... I have set my backlight to 1 minute time out NUMEROUS times, but it keeps resetting itself back to 10 seconds after some time (i'm not sure how long). This is driving me crazy! Especially when I'm trying to read something. What can I do? ANY help is beyond appreciated!
p.s. It began after I installed the new windows 6.1 update.
I am having the same problem and it is also driving me crazy!!
Someone please help!
Thanks
Me to
..just yesterday the phone kept trying to dim at 10 seconds but S2u2 wouldn't allow it so it would come back on..and it kept doing that crap every 10 seconds!!! I can't stop that setting from reverting back to 10 seconds!!!
Seeeeee? Somebody has to be able to figure this out.
same issue
i got the same problem too. i got the oem rom with wm6.1 on it. i installed s2u and manila 2d and pocket tool man. tried all the settings i could find from those programs. but the backlight keeps resetting back to 10sec after a while
any help would be good!
Possible Fix when Backlight Patch doesn't work
Like many others, I have applied the Backlight patch and experienced NO improvement after the Tilt is turned off and on.
I have loaded PHM's RegEdit and had a look at other registry settings and found a solution that works on my Tilt.
Under HKEY_CURRENT_USER / ControlPanel / Backlight you will find a key called "LockLevel", my value for this key was initially 1. I changed it to 0, and since then, whatever setting I use for the backlight timeout stays put even after numerous power cycles and days of use.
Would someone else who is familiar and comfortable with RegEdit try this and confirm this so we can verify it is not just isolated on my Tilt?
dazimmermann said:
Like many others, I have applied the Backlight patch and experienced NO improvement after the Tilt is turned off and on.
I have loaded PHM's RegEdit and had a look at other registry settings and found a solution that works on my Tilt.
Under HKEY_CURRENT_USER / ControlPanel / Backlight you will find a key called "LockLevel", my value for this key was initially 1. I changed it to 0, and since then, whatever setting I use for the backlight timeout stays put even after numerous power cycles and days of use.
Would someone else who is familiar and comfortable with RegEdit try this and confirm this so we can verify it is not just isolated on my Tilt?
Click to expand...
Click to collapse
I am using the same PHM's , and my value is set at "0" already....
yes, Mine is also set at 0.
I cant believe that HTC would release a patch that doesnt work!
Anyone else had luck?
Setting it from 0 to 1
"Un-dims" your backlight. Setting it from 1 to 0 makes it bright thats all I could figure out
It's a known problem with the 6.1 ROMS, although not everyone experiences it. Even the stock AT&T ROM had it. An official fix for it was released not long ago. It's available for download here: http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=1&dl_id=269
It doesn't wipe your phone, so it's safe to do without having to set everything back up.
backlight works, but scroll wheel does not
jcreemer said:
It's a known problem with the 6.1 ROMS, although not everyone experiences it. Even the stock AT&T ROM had it. An official fix for it was released not long ago. It's available for download here: http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=1&dl_id=269
It doesn't wipe your phone, so it's safe to do without having to set everything back up.
Click to expand...
Click to collapse
This worked fine and fixed the backlight issue on my stock AT&T Tilt ROM, but it seems to have screwed up my scroll wheel function. Now my scroll wheel only turns up/down the phone volume. I can't seem to get it to do anything else in any other program.
bumblefreak said:
This worked fine and fixed the backlight issue on my stock AT&T Tilt ROM, but it seems to have screwed up my scroll wheel function. Now my scroll wheel only turns up/down the phone volume. I can't seem to get it to do anything else in any other program.
Click to expand...
Click to collapse
I haven't experienced that problem. What ROM are you using?
Finally!
Click Here for the .cab that fixed my unit. I got it off the ATT forum.
NOTE to all... Even this fix did not solve my problem until I checked the boxes to time the backlight. I like the backlight feature on all the time. If I don't want to see the screen, I turn it off.
I Had The Same Problem Too, But Then I Realized That Whenever I Disabled The Password Option In Settings It Went Back To Normal And Stayed At Whatever Timing I Set It To. The Only Thing About It Is That I Cant Use The Password Option In Settings. Unless I Was To Disable It Everytime I Used The Phone For More Than A Few Minutes At A Time...
I Have The At And T Tilt With The Shipped Wm6.1 Rom.
this will help
with your backlight problem
It helped me and then-some
I've tried all suggestions (except registry edits) and nothing works for mine! I like to keep my display on for GPS functions, but mine dims whether it's on battery or external power. The link for the cab in the AT&T forum no longer works, so I don't know whether that was similar to the HTC fix (which also doesn't work for me).
Since I have yet to try this, what program should I use to edit my registry? I've never done it, so I don't know what I need to do it. I also noticed someone posted these registry changes in the AT&T forum:
- change HKCU\ControlPanel\Backlight\ACTimeoutTemp value to your desired AC timeout in seconds. I set mine to 120 (2 min).
- change HKCU\ControlPanel\Backlight\BatteryTimeoutTemp value to your desired Battery timeout in seconds. I set mine to 60 (1 min).
- change HKCU\ControlPanel\Backlight\Locklevel\Locklevel to 0xFFFFFFFFF (this may also be just FFFFFFFF is your reg editor allows direct hex entries).
Note: With this change, if you wish to change your dimming timeout, you'll have to go back into the registry and update the settings.
Does this look like it would work? This is driving me absolutely nuts and I am this close to reverting to 6.0, even though my device was shipped with 6.1.
Thanks for the help, everyone.
EDIT: Since my search for this answer brought up too many different variables, I'd wanted to pose the question here, as it pertains to this issue... Will upgrading to a 6.5 ROM solve this backlight issue more simply?
Hi,
I'm a victim of weird problem that occurs on my SE Xperia X1 phone and affects the clock.
Generally, after going into standby mode something is happening with system clock and after switching the phone on the clock is late - sometimes just few minutes, sometimes few hours.
This bug appears only sometimes and the soft restart seems to solve the problem for a while (the clock updates itself to correct time), still it is very unfortunate bug, especially when you use a phone as a alarm every morning
Did someone had such problems with X1? and perhaps know the way to solve this problem?
best regards
piotr
my x1 seems to freeze about once per day when docked. usually the only way that i notice is when the clock is stuck (i.e it's still stuck at 15:30 when it's 16:15). the other thing that happens is that for some reason the default theme is applied when i open the start menu (i.e the start menu colour is the same as the genric windows theme colour) ...
a reboot fixes this issue. so far this has only happened to me when i've been docked (as far as i'm aware) so it may have something to do with activesync ... ?
hardreset is the fastest way to solve "strange" problems.
do it and check without installing anything. if it happens again your xperia has something bad, if it happens again after installing software, then there's some program causing it.
I got the same thing.
Very annoying.
Only noticed it with the new R2A roms though..
Calvin H said:
I got the same thing.
Very annoying.
Only noticed it with the new R2A roms though..
Click to expand...
Click to collapse
doh ! i was hoping that the new firmware solved the problem. :-(
Thanks guys! Today I updated Xperia to R2AA10 and so far I did not install any new software (it is hard to resist though. I'll let you know if that solved clock thing
Guys after the R2AA10 update the clock problem is still there. No programs install for 2 days, and today suddenly, clock has gone 1 hour back...
What is going on?
This happens only in 2nd and 4th panel. The clock is normal in the 1st panel, and in the panel with the fish...
What should i do? I tried soft, hard reset, everything!
polakis21 said:
Guys after the R2AA10 update the clock problem is still there. No programs install for 2 days, and today suddenly, clock has gone 1 hour back...
What is going on?
This happens only in 2nd and 4th panel. The clock is normal in the 1st panel, and in the panel with the fish...
What should i do? I tried soft, hard reset, everything!
Click to expand...
Click to collapse
I would not say it is a matter of panel - on my Xperia this problem occurs in first panel (even after updating to R2AA10
Hello,
I have the same problem with the Htc Touch Diamond after updating to the latest official ROM:
ROM: 2.03.483.1 FRE
Radio: 1.09.25.23
Protocol: 52.51.25.26H
Windows Mobile 6.1 build 20764.1.4.3
I think it might be due to some bug in a power saving feature...
Has anyone got a solution?
I have a part solution
it happens on the SPB panel for me, its the 4th panel for me also.
if yours it the 4th panel too then try moving the panel to another place.
if that doesnt work then i know this deffo works as iv used it, goto the today panel, leave it there for a few minutes (10-20) then go back to the panel which has got the bug, you will notice the time will be in sync and the problem goes away. It happens from time to time, sometimes weeks apart so as much as its a pain, i can live with it. I dont know if it affects the alarm when the time stops.
I have the same problem with the clock. Was looking for a solution here and found this topic. Funny thing is, I have also the spb mobile shell panel and it is on the 2nd place. I will try the trick of safdl and hope that the problem will solved. And about the alarm, freezing of the clock doesn't effect the alarm.
Same here
The same problem here with an HTC Diamond Touch... however it looks very random to me. Any solution or clue about what is happening?
I solved this
My Touch Diamond had the same problem : the clock was never right. so I downloaded the advanced configuration tool and turned on every single power management option and it seems to have fixed it. hope it will work for you too.
I tried this one. But it's not WORK!!!! HELP!!!
Vapaus00 said:
My Touch Diamond had the same problem : the clock was never right. so I downloaded the advanced configuration tool and turned on every single power management option and it seems to have fixed it. hope it will work for you too.
Click to expand...
Click to collapse