Related
Many users have been requesting the ROM for the production MDA's. I tried to upload it to the XDA-Developers FTP site but I could not upload it to the T-Mobile ROM directory so if a moderator can download this from the link I provided and move it to the FTP server for long term access.
Specs are as follows:
ROM Version 1.8.10.2 WWE
ROM Date 12/10/05
Radio Version 01.09.10
Protocol Version 4.0.13.20
This does not include the Extended ROM as that is already provided in the link below as this is where this request for the full rom was initiated.
http://d01.megashares.com/?d01=efbcdfc90bfae88ed9ac9ec8fcda5cc6
Scroll to the bottom of the page once you go to the megashares link and you will see the Download Now link.
If you need the Extended ROM follow this link: http://forum.xda-developers.com/viewtopic.php?t=41348
Question - you can't just flash back the extended ROM, right?
Yes but it is not the same procedure as backing up or writing a new ROM as you need a utility which I mention below. What you need to do is first "Unlock/Unhide" the hidden Extended ROM partition on your MDA. Once you do this you can see the extended ROM files which are posted in the link above. (There is a utility called Unlock Ext Rom Wizard.cab) on the XDA FTP server. You copy this to your MDA and click on it and it should unlock the parition/folder. After running it I would do a soft reset.
You can then use ActiveSync's Remote File Explorer Utility to move the files around as you will see the new partition when you select change folder.
Basically you copy your original extended ROM files to a safe location for backup and then delete all the files in the extended ROM directory. Copy the Extended ROM files that you downloaded into the Extended ROM directory and once you do a hard reset it will automatically install the new files when it boots up.
Ah, ok... thanks - I don't see the unlock tool for the Extended ROM though....
Nevermind... found it.
any changes, improvements or modifications worthy of mentioning in this ROM?
thanks,
How do you change the boot screen. I only see the ability to restore the radio and OS...
Extended rom is read only.. Please tell me that I am not going to have to reflash with an old rom to modify the extrom...
bradleydick said:
Extended rom is read only.. Please tell me that I am not going to have to reflash with an old rom to modify the extrom...
Click to expand...
Click to collapse
My Extended Rom is writable, but is still hidden. I think it may be due to the fact that I used aWizard 1.3b2 (from http://forum.xda-developers.com/viewtopic.php?t=37386) to remove the CID lock from my phone and change the splash screen. I then also patched my radio to 01.13.10.
Can the original poster explain how to restore the T-Mobile ROM? The utility that is in the folder did the CID unlock on my phone and all that successfully, but when I do option "w" (write OS ROM to device), it doesn't "find" the T-Mo ROM right there in the folder. I don't get it. =(
shdwphnx said:
bradleydick said:
Extended rom is read only.. Please tell me that I am not going to have to reflash with an old rom to modify the extrom...
Click to expand...
Click to collapse
My Extended Rom is writable, but is still hidden. I think it may be due to the fact that I used aWizard 1.3b2 (from http://forum.xda-developers.com/viewtopic.php?t=37386) to remove the CID lock from my phone and change the splash screen. I then also patched my radio to 01.13.10.
Click to expand...
Click to collapse
How do you find Radio 1.13.10 over the OEM delivered version? Any significant improvements?
Genesis3 said:
shdwphnx said:
bradleydick said:
Extended rom is read only.. Please tell me that I am not going to have to reflash with an old rom to modify the extrom...
Click to expand...
Click to collapse
My Extended Rom is writable, but is still hidden. I think it may be due to the fact that I used aWizard 1.3b2 (from http://forum.xda-developers.com/viewtopic.php?t=37386) to remove the CID lock from my phone and change the splash screen. I then also patched my radio to 01.13.10.
Click to expand...
Click to collapse
How do you find Radio 1.13.10 over the OEM delivered version? Any significant improvements?
Click to expand...
Click to collapse
When disabling Flight Mode, the original radio took about 30 to 45 seconds to get a signal. The new radio takes closer to 2 minutes. However, the new radio gets 3 bars of signal in places the old radio only got 1. I consider a reasonable tradeoff, as I don't use Flight Mode very often.
for updating the os rom and radio rom, it says please type the number, what number do i type?
jthurs said:
for updating the os rom and radio rom, it says please type the number, what number do i type?
Click to expand...
Click to collapse
I had that initial problem myself. I had to copy it to my C:\Flash since it didn't seem to work correctly off my g: drive under a few folders deep. I looked at the .cmd (batch) file at what it does is do a dir /s (directory listing including looking under subfolders) for *.nba files looking for radio or os in the filename. If you do not see a number then it is not finding the .nba files. When it does find them you will see the name of the rom file preceeded by a number. I would do what I did with the directories and if that doesn't work copy the .nba files into the root folder of the .cmd file folder.
i try to restore the rom with this flash.. the version on my phone is
rom : 1.8.10.2 WWE
rom date : 12/10/05
radio version 01.04.10
protocol version: 4.0.13.17
extrom version: 1.8.10.104
Hello,
Anyone has this rom ( Version : 1.8.10.2 )? If so, is it possible please upload. I'm searching for a wizard ROM which shows MM/DD/YY in device info ( i.e 12/10/05 ).
I request again, if you have please upload coz its urgently needed for me.
Best Regards
This ROM should have what your looking for.
LINK
-MyHTC- said:
This ROM should have what your looking for.
LINK
Click to expand...
Click to collapse
Thanks a lot. I was searching for this since from yesterday and there were no working links.
Anyway, thanks again.
Best Regards
No problem. Glad I could help.
dont mean to intrude, but i needed a production cingular rom for my g4 version 2.25 can anyone help?
Wm os 5.1.195, rom 2.26.10.2wwe
TMO has moved things around, but you can find instructions and download links for Microsoft Windows Mobile Version 5.0 OS 5.1.195,
and ROM version 2.26.10.2WWE on their US website at
http://support.t-mobile.com/doc/tm23294.xml?&A2L.SERVICE=UpdateSoftware.
Here's a PRODUCTION 'T-Mobile Wing' WM6 OS dump in it's imgfs_raw_data form.
I recommend using ImgfsTools2rc2b to reconstruct the NB, which you may then be able to flash on a P4350 using the awizard tools... until such time as someone produces a Hermes / Trinity style custom bootloader / RUU.
I don't have a P4350 here to test unfortunately.
Rapidshare link:
http://rapidshare.com/files/32502333/imgfs_raw_data.zip.html
Hey,
This is really cool that we've finally got some progress on the wm6 scene for the herald. Anyways i own an HTC P4350 (herald) so could you like tell me how to flash this onto my device by converting your data to OS.nb etc etc.
Thanks
ImgfsTools2rc2b:
- http://forum.xda-developers.com/showthread.php?t=298327
How to create the NB:
- Get a regular P4350 RUU, extract using WinRAR, find RUU-signed.nbh
- Use NBHextract to get the OS NB file
- Use NBsplit to split this file
- Use IMGFStoNB to create the new payload file
- Use NBmerge to create the new NB
How to flash a NB to the P4350 using awizard:
- http://forum.xda-developers.com/showpost.php?p=1111175&postcount=9
YOU DO THIS AT YOUR OWN RISK. It might work, it might not. You should be able to flash the regular P4350 RUU back on if all else fails (hopefully).
i havent got an exam for 3 weeks now so i'll cook you guys up a ROM
anyone here wanna test? ill need baout 5 people who know what they are doing and dont mind (possibly) bricking thier phone
I can cook a NB, no problem, but is there a way to flash unsigned files on the Herald?
Since only the OS partition is being flashed, there shouldn't be a bricking danger.
I am prepared to be a tester, i dont know much about ROM cooking though but I know enough to test....
When cooking the ROM will you be using the extRom from T-mobile or just the OS?
Presumably you will not include any IPL or SPL?
Also worth noting is I have 5.04.0001 IPL and 5.04.0000 SPL from the latest ROM.
What is the IPL & SPL of the Wing?
Nice to hear the Herald is finally getting some love. Best of luck!
sorry, just downloaded the zip, what is in there is only a part of what you need for wm6 to boot.
the imgfs partition (which is there) contains all the files and registry etc
the XIP partition (which is missing) contains the kernel and information on how to boot to the OS.
whithout the XIP (found in .nb and .nbh's) this thing will never boot.
and no the WM5 xip wont work.
Ah crap, my bad, leave it with me.
nevermind....
Flashing an unsigned ROM / Backup didn´t work for my German P4350.
Mine is stuck at the Bootloader for now, so please be sure of how you get things done. I Don´t want anyone to be in that **itty situaton of having to wait for the official Romupdate. ( There is no published German one by now )
Maybe this is different with WWE roms ? I dont know exactly...
Where to take WWE Rom?
ImgFS Tools Version 2
In my edition:
In my edition ASerg-Write-OS-ExtRom-Herald.Zip
do you think I could flash this to my wizard?
not a chance
Guys, don't you need the XIP section ? ...
If you do, please upload a wm6 OS.nb and i will give it to you.
stucked at the Bootloader too
anichillus said:
Guys, don't you need the XIP section ? ...
If you do, please upload a wm6 OS.nb and i will give it to you.
Click to expand...
Click to collapse
if they had an .nb then it allready has an XIP, the problem is that they have the imgfs.bin but not he nb so no XIP part
Here are two dumps of teh XDA terra (german)
1.: taken by awizard = 57MB
2.: taken by pdocread = 62MB (pdocread -l = real size of sectors 0x3e00000 = 62MB)
1.: http://rapidshare.com/files/29976175/teraa_awizard.rar
2.: http://rapidshare.com/files/32745275/os62.nb
Good luck
Hi all,
My first time being a productive member of this great forum (or at least, I hope so ).
I've been wanting to flash the ROM on my Touch HD with Orange UK (something I've never done before), but as an "insurance policy", wanted to have a backup of the stock ROM in case I have he need to restore it, or need to send back the phone to Orange for some reason. After searching the Internet at large and this forum in particular, I was unable to find a dump of the same ROM version as the one I have (1.19.61.1) with Orange UK, so after an hour or more of searching and reading, I was finally able to follow the steps to extract the ROM from memory in .raw format and then reassemble it as an .nbh file using the itsutils tools and the Blackstone "Kitchen" tools. The reference ROM I used for the reconstruction process was this one (found through the forums):
RUU_BlackStone_HKCSL_WWE_1.19.831.0_Radio_52.49a.2 5.26_1.09.25.14_Ship.exe
Here are the complete details regarding the ROM I'm posting, from the Device Information program of my phone:
Operator version: 34.119.1.611
ROM version: 1.19.61.1 WWE
ROM date: 11/25/08
Radio version: 1.09.25.14
Protocol version: 52.49a.25.26U
The process seems to have gone smoothly, and I have ended up with ruu_signed.nbh file, which I have uploaded for you all on Rapidshare and Mediafire.
However, I have not actually flashed my device with this ROM (since this is the current ROM on my device, and having no actual experience in flashing yet, the result might seem a bit ambigious to me) I would really appreciate it if someone would verify whether it actually works or not, so people don't heap curses on me if it doesn't... I'm just a newbie, remember.
So without further ado:
http://rapidshare.com/files/228874929/Touch_HD_Orange_UK_1.19.61.1_WWE.rar
Mediafire:
http://www.mediafire.com/?sharekey=eb6c7c685fb1912708f8df73f2072ed6e04e75f6e8ebb871
This is exactly what i need! Hope its working for the both of us!
original spl
hi i might need to use your dumped rom - i will probably also need to reinstall my original spl (have used a hspl to flash cooked rom) - i noted down my original rom and radio, but not the spl - can you tell me what was the original spl with this rom?
thanx
protoism said:
hi i might need to use your dumped rom - i will probably also need to reinstall my original spl (have used a hspl to flash cooked rom) - i noted down my original rom and radio, but not the spl - can you tell me what was the original spl with this rom?
thanx
Click to expand...
Click to collapse
Orginal SPL 1.14.000
MrKaon said:
Orginal SPL 1.14.000
Click to expand...
Click to collapse
thx
hate to be a complete dweeb, but how do i flash this dumped ROM - its just a nbl file how how do i couple it with a rom update utility??
Guys, check this out. I hope, it will be usefull for you.
Blackstone_Orange_UK_1.14.405.3
11.Nov.08
http://rapidshare.com/files/16237350...Ship.part1.rar
http://rapidshare.com/files/16237926...Ship.part2.rar
http://rapidshare.com/files/16238323...Ship.part3.rar
P.S. it was found in this site.
http://forum.xda-developers.com/showthread.php?t=444170
I take no responsability in any damage on your device. If you're not sure what you're doing, take time to learn some basics from wiki.
This is the process to restore your Rhodium (TP2) back to the stock ROM and SPL. This should be enough for you to warranty return your device.
I have "borrowed" all of the examples from various sources on xda. Many thanks must goto jcespi2005 and JugglerLKR who created the guide and packages for the Raphael from which the majority of this is taken. The SPL "relock" procedure was taken from the Hard SPL thread. Credit to cmonex .
Prerequisites
The Rhodium Kitchen version 0.1 (Open the Zip File and read the password from the !!!readmefirst!!!.txt)
WinRAR or 7zip
RhodiumSPLRelocker_079SPL.zip
nbImg v1.1
Warning
avast! home detects buildOS as a virus, I've personally used it on my machine with AV off, and am not infected, but it's up to you.
Overview
You must follow these instructions in the order given. Once you have the Stock SPL you cannot flash any ROM's except the ones that are signed by HTC. For that reason you must restore the ROM first, then the SPL.
Step 1 - Get your Orginal ROM.
If you can find your Carrier's / Supplier's ROM on this wiki page or on their website. Please jump ahead to Step 4 - Flashing back to Shipped Stock ROM.
If you cannot find your ROM on the wiki then download this ROM : RUU_Rhodium_HTC_Europe_1.19.401.0_Radio_Rhodium_3.44.25.27_Signed_Ship.exe and proceed to Step 2 - Dumping your phones ROM.
Step 2 - Dumping your phones ROM
First you need to Dump the ROM from your Phone. Follow the instructions in this thread [TUT] Dumping an Rhodium ROM / SPL to obtain 4 *.raw files.
N.B: Although it might seem obvious to senior members, you must dump the ROM from your device before you flash it. If you have flashed another ROM to your device, then your orginal stock ROM is lost. You have 2 options, wait and see if your carrier will release one, or beg someone else with the same device to dump their ROM and share the *.raw files.
Step 3 - Reconstructing the ROM
-3.1: Extract the Kitchen to a Folder on the root of your PC (C:\, D:\, etc).
-3.2: Open the RUU_Rhodium_HTC_Europe_1.19.401.0_Radio_Rhodium_3.44.25.27_Signed_Ship.exe file with WinRAR or 7Zip and extract the ruu_signed.nbh file and place it in the BaseROM folder of the Kitchen.
-3.3: Place the Part01.raw (XIP) and Part02.RAW (IMGFS) in the BaseROM folder of the Kitchen.
-3.4: Run RhodiumKitchen.cmd in the Kitchen.
-3.5: Enter the following options into the Kitchen:
-3.6: e, b (for Dumped ROM). Press [Space] once complete.
-3.7: c, a (for Cooking a ROM).
-3.8: Press the "Play" button in BuildOS and wait for it to complete.
-3.9: Close BuildOS, Close PagePool Changer and Press [Space] to goto the main menu.
-3.10: You will now have a Flashable NBH file. Press f to Flash.
Now goto Step 5 - Removing Security Unlock
Step 4 - Flashing back to Shipped Stock ROM
If you were lucky enough to find a shipped ROM on the wiki or your carrier's / supplier's website, then just run the "ship exe" and follow the on screen instructions.
Step 5 - Removing Security Unlock
If you have purchased the SIM/CID/Security unlocker by Olipro, you can re-lock your device using the following tool : http://hpcmonex.net/htc/secrelock.zip
Step 6 - Restoring the Splash Screen
This is only needed if you couldn't find your Shipped Exe. If you have your Shipped Exe, you get the splash with it.
You're best creating a seperate folder out side the kitchen for this.
-6.1: Find a shipped exe from another WVGA device (HD or TD2).
-6.2: Extract the ruu_signed.nbh from the Shipped Exe using WinRAR or 7Zip.
-6.3: Use NBH Extract (in the Kitchen\Tools Folder) on ruu_signed.nbh
-6.4: Delete all files, except 01_MainSplash.nb.
-6.5: Use nbImg.exe as follows: nbimg.exe -F 01_MainSplash.nb -w 480 -h 800
-6.6: Delete 01_MainSplash.nb.
-6.7: Use nbImg.exe as follows: nbimg.exe -F 01_MainSplash.nb.bmp
-6.8: Use HTCRT in the Kitchen\Tools to make a NBH file from the 01_MainSplash.nb.bmp.nb file.
-6.9: Put the new NBH file and copy RhodiumCustomRUU from Kitchen\Tools into an empty Folder.
-6.10: Run the RhodiumCustomRUU.exe to Flash the Splash.
Step 7 - Flashing back to Stock SPL
-7.1: Ensure you already flashed stock ROM and Radio, because stock SPL flash is always the last step before sending the device in.
-7.2: Extract the relocker zip and run the EXE on your PC.
-7.3: If you wish to replace RUU_Signed.NBH that got extracted, feel free to do so, but not necessary (this Hard-SPL will only allow overwrite with a SPL signed by our custom cert). The included one is the 0.79.0000 stock SPL.
-7.4: Flash the Stock SPL
-7.5: Verify if it flashed by checking version in bootloader screen, it should say 0.79.0000, not 0.85.OliNex.
Credits:
-jcespi2005 and JugglerLKR for the Kaiser and Raph Kitchens
-Olipro and cmonex for Hard SPL and Security Unlocking
-pof for nbImg
-Everyone in the Readme.
Reserved
(P.S. I've been writing this in another forum for a few days, hence the Thread Date of the 15th - so this is a bump )
Dave
Did the same thing
Used the Ralphael Kitchen, changed the settings to Rhodium added some settings for Rhodium. used a signed Tmobile US Rom.
Nice Tutorial
Sorry, Dumb Question...
-MOD EDIT: Removed Full Quote
I have found my stock ROM, so I can continue with flashing back to stock, but where do I find the stock SPL?
D_monie3 said:
-MOD EDIT: Removed Full Quote
I have found my stock ROM, so I can continue with flashing back to stock, but where do I find the stock SPL?
Click to expand...
Click to collapse
It's the RhodiumSPLRelocker in the Prerequisites or download it from the Hard SPL thread.
Ta
Dave
First, thanks for this. I write a fair amount of documentation of my work as a network admin so I know how time consuming this is.
cdguider has been kind enough to dump and reconstruct the TMoUS ROM so I don't actually need to do this (although I may just for the exercise) but I do want to start learning how to modify this ROM to suit my own needs. Is there a guide up that will get us newbies started on using the kitchen? Hopefully one that explains in detail what each of the kitchen tools are and what they do as well as how the Rhodium ROM is constructed. I prefer to understand what I am doing versus following recipe steps. For example, My Hermes ROM was partitioned into the ROM and an extended ROM where carriers could put their installers. Does the Rhodium have an ExtROM?
OK, back to the search tool.
S
sleonard said:
First, thanks for this. I write a fair amount of documentation of my work as a network admin so I know how time consuming this is.
cdguider has been kind enough to dump and reconstruct the TMoUS ROM so I don't actually need to do this (although I may just for the exercise) but I do want to start learning how to modify this ROM to suit my own needs. Is there a guide up that will get us newbies started on using the kitchen? Hopefully one that explains in detail what each of the kitchen tools are and what they do as well as how the Rhodium ROM is constructed. I prefer to understand what I am doing versus following recipe steps. For example, My Hermes ROM was partitioned into the ROM and an extended ROM where carriers could put their installers. Does the Rhodium have an ExtROM?
OK, back to the search tool.
S
Click to expand...
Click to collapse
No it doesn't.
For help with this Kitchen, see _Alex_'s cooking guides on the wiki for the Kaiser. That's where I started reading and then I just kept going, download kitchens published by other chefs and see how they put stuff together. There are two main types buildOS (like this one) and PRB that uses bepe's platform rebuilder - ervius's visual kitchen is based on it.
Thanks
Dave
i reconstructed the uk orange stk rom all ok very good guide thank you!
i had to do this because i lots the hard reset it just flashes up no immage then back to boot loader i though stock rom would resolve this i rebooted it and still have no hard reset still says no immage boo boo whats going on is it due to the ruu i am using i thried the rhodium one and the v1.1 one what ever it is i also tried dave's wrapper and a kaiser on out the kitchen tools all same results so i guess not any ideas ppl!?
matttytn2 said:
i reconstructed the uk orange stk rom all ok very good guide thank you!
i had to do this because i lots the hard reset it just flashes up no immage then back to boot loader i though stock rom would resolve this i rebooted it and still have no hard reset still says no immage boo boo whats going on is it due to the ruu i am using i thried the rhodium one and the v1.1 one what ever it is i also tried dave's wrapper and a kaiser on out the kitchen tools all same results so i guess not any ideas ppl!?
Click to expand...
Click to collapse
So you are stuck in the bootloader?
What does it say in the bootloader?
Ta
Dave
Sorted it i am such a fool i was doing the wrong button combo!!!!!!
This is fantastic i am now going to have a play at cooking up my own i know i can do this now i will get my head down and work this stuff out i mite have my first rom by xmas
question about step 3.9
"Close BuildOS, Close PagePool Changer and Press [Space] to goto the ."
how can i close PagePool Changer ? it doesnt work.....
and ,which "main menu" i can goto?
leeneo said:
question about step 3.9
"Close BuildOS, Close PagePool Changer and Press [Space] to goto the ."
how can i close PagePool Changer ? it doesnt work.....
and ,which "main menu" i can goto?
Click to expand...
Click to collapse
Just click the [X] in the top right.
Pressing space will take you to the first set of options that the batch file offered you.
Thanks
Dave
leeneo said:
:12
:12.PagePool.Changer.bat
tools\xvi32\xvi32.exe RUU_signed.nbh
GOTO :EOFQUOTE]
this code in RhodiumKitchen.CMD
but , i cant find PagePool.Changer.bat ........
Click to expand...
Click to collapse
leeneo said:
leeneo said:
:12
:12.PagePool.Changer.bat
tools\xvi32\xvi32.exe RUU_signed.nbh
GOTO :EOFQUOTE]
this code in RhodiumKitchen.CMD
but , i cant find PagePool.Changer.bat ........
Click to expand...
Click to collapse
That's a label in the batch file .
Search for it in the RhodiumKitchen.CMD and see what's called from there.
P.S. I don't have this kitchen on this computer so a lot of guess work and memory on my part.
Dave
Click to expand...
Click to collapse
DaveShaw said:
leeneo said:
That's a label in the batch file .
Search for it in the RhodiumKitchen.CMD and see what's called from there.
P.S. I don't have this kitchen on this computer so a lot of guess work and memory on my part.
Dave
Click to expand...
Click to collapse
ok , i see ..
you kind-hearted ! thx
Click to expand...
Click to collapse
yea thanks for the thread dave, When i use these tools to do up my own splash it chops off at the bottom... is there a patcher out yet to fix this?
thx for the tutorial , how can i take new xip/sys and replace the existing?and how can i remove and add prgorams?
joshkoss said:
yea thanks for the thread dave, When i use these tools to do up my own splash it chops off at the bottom... is there a patcher out yet to fix this?
Click to expand...
Click to collapse
Yes, but I can't recall where I saw it . It's not for the TP2 though, maybe HD or TP.
saymyname said:
thx for the tutorial , how can i take new xip/sys and replace the existing?and how can i remove and add prgorams?
Click to expand...
Click to collapse
Porting isn't simple, have a look for some tutorials on using BuildOS and porting.
Adding and removing programs, to add, just create OEM packages, to remove, just remove them.
Have a look at _Alex_'s cooking tutorials on the Kaiser Wiki.
Dave
DaveShaw said:
Yes, but I can't recall where I saw it . It's not for the TP2 though, maybe HD or TP.
Dave
Click to expand...
Click to collapse
yep the tp one has no affect on our splash unfortunatly. i've already posted in theyre thread askign they make it compatible. but just wonderin if you came across anything about this is in your many travels.
Question
Hi everyone ...
First of all Thanks alot for this Tut Dave awesome work.
I dumped my Stock Rom from a unbranded O2 TP2 and rebuild it.
For Cooking i used the signed_ruu from RUU_Rhodium_HTC_Europe_1.19.401.0_Radio_Rhodium_3. 44.25.27_Signed_Ship.exe
It did everything like described and i've got a
signed_ruu.nbh (1.19.207.1) newest o2 Stock Rom.
Should be fine right?
Do i also need to do Step 6 so creating a splash screen?
If anyone needs this rom drop me a message ...
Hi all;
I just got my Rhodium back from repair. There was a new SPL-0.88.0000 on the Rom. Maybe it has also the latest build OS and XIP. So I decided to dump the complete Dutch Rom. It was possible thanks to DaveShaw. See his tread http://forum.xda-developers.com/showthread.php?t=501871
There are 4 RAW files in the attachment. Maybe you can use it to cook a Rom. I still didn't manage it to cook a Rom. Maybe I learn it ones.
Here are de remarks from the Rom:
Versie van het besturingssysteem:
5.2.21887 (21887.5.0.86)
Manila-versie:
2.5.20121225.0
ROM versie:
2.07.404.1 (80303) NLD
Radioversie:
4.49.25.91
Protocolversie:
61.44etc.25.35U
Have fun with it.
Hi!
How can I use the spl.nb file?
Rename to rhodimg.nbh and use classic flash SD method?
No that is not possible. You need to rebuild it if I am not mistakin. Just download a stockspl from the hardspl thread. They don't check on different spl numbers.
Lennyz1988 said:
No that is not possible. You need to rebuild it if I am not mistakin. Just download a stockspl from the hardspl thread. They don't check on different spl numbers.
Click to expand...
Click to collapse
Okay, thank you!
I had to bring the service machine. Therefore I was looking for this. But the service took the 87 version.
sancho1234 said:
Hi!
How can I use the spl.nb file?
Rename to rhodimg.nbh and use classic flash SD method?
Click to expand...
Click to collapse
You have to follow this thread to restore SPL: http://forum.xda-developers.com/showthread.php?t=550131
how to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!
0. please make sure you already flashed stock ROM and radio, because stock SPL flash is *always* the last step before sending the device in.
1. Download the Relocker attachment, extract the zip and run the EXE on your PC
2. if you wish to replace RUU_Signed.NBH that got extracted, feel free to do so, but not necessary (this Hard-SPL will only allow overwrite with a SPL signed by our custom cert). the included one is the 0.79.0000 stock SPL. you also have the option for 0.84.0000 and 0.87.0000, see the attachments. (in the above mentioned url)
and 0.88.0000, see the attachments. (My original SPL added)
3. flash
4. verify if it flashed by checking version in tricolour screen, it should say 0.79.0000 (or 0.84.0000 or 0.87.0000 or 0.88.0000), not 0.85.OliNex.
Kajoe said:
You have to follow this thread to restore SPL: http://forum.xda-developers.com/showthread.php?t=550131
how to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!
0. please make sure you already flashed stock ROM and radio, because stock SPL flash is *always* the last step before sending the device in.
1. Download the Relocker attachment, extract the zip and run the EXE on your PC
2. if you wish to replace RUU_Signed.NBH that got extracted, feel free to do so, but not necessary (this Hard-SPL will only allow overwrite with a SPL signed by our custom cert). the included one is the 0.79.0000 stock SPL. you also have the option for 0.84.0000 and 0.87.0000, see the attachments. (in the above mentioned url)
and 0.88.0000, see the attachments. (My original SPL added)
3. flash
4. verify if it flashed by checking version in tricolour screen, it should say 0.79.0000 (or 0.84.0000 or 0.87.0000 or 0.88.0000), not 0.85.OliNex.
Click to expand...
Click to collapse
Thank you! I will try it
When I flashing, how can I change the RUU_Signed.NBH to 0.88?
Using Windows7, and has error: "ERROR [238] FILE REED / The Update Utility can not open the requested file. Please check your Update Utility"
jtx64 said:
When I flashing, how can I change the RUU_Signed.NBH to 0.88?
Using Windows7, and has error: "ERROR [238] FILE REED / The Update Utility can not open the requested file. Please check your Update Utility"
Click to expand...
Click to collapse
1. First be shure that you have installed the original Rom to your phone.
2. Than unrar RhodiumSPLRelocker. Put my RUU_Signed.NBH (SPL 0.88) in the same extracted map.
3. Run RhodiumSPLRelocker and folow the instructions.
Good luck. Kajoe