Hi again I have tried running Mary v2.02 and when it finished said that the file was corrupted and when i start my trinity it gets stucked and dosent go pass the first screen is there any type of restart tool or something i can do to repair ir I am getting worried
Iwould also like to add that i have already tried soft and hard reset I think I'm screwed because it really dosent go pass the first screen that appears when you turn the pda on.
http://forum.xda-developers.com/showthread.php?t=308691 ?
Related
omg wtf do i do now?! my pc rebooted 31% into the flash.. it blue screened out of no where!
now its stuck on a IPL 2.21 screen!
this happened to me a few times as well. I just re-tried the flash from another machine and it worked fine.
but i cant establish a active-sync connection because the phone wont start it just stays at the 2.21 screen thats red/green/blue/white! omg im about to cry what do i do lol
I have seen the same screen, and have also had the computer blue screen on me probably 3 or 4 times now. When i plugged it into another machine with activesync, i ran the updater and it worked fine.
im trying it right now on 2nd pc still downloading the rom file tho
ok i was able to flash using another computer thank god!
:lol:
Can you post the steps of reflashing the wizard? I've tried a flash on another system, but it still doesn't work...
My steps:
1. Install Active Sync 4.1
2. Connect the wizard on usb
I've tried to downgrade the wizard with wizbackup. wizbackup need to flash IPL/SPL 1.01. The flash was ended without errors. But now the wizard starts and I only see the three colors and the version of IPL/SPL. Then I connect the wizard, Active Sync doesn't get a connection to the phone.
UPDATE:
In another thread I read that the wizard can't be flashed in IPL/SPL 1.01 without an OS. Can anyone verify this information or help me?
UPDATE II:
I finaly found out, that the phone can be restored with an image from the sd-card.
1. Put an image from the system to sd-card with psdwrite.exe
2. Power Off the phone and put in the sd-card
3. Power on the phone holding the camera key
4. Then the bootloader is coming up, press the voice key during 3s
5. The bootloader upgrades your phone from sd-card
Good luck!
that **** happens to me all the time, it always crashes to the boot loader and once its there you can just restart the upgrade no problem. if you need to boot into the boot loader then simply, from a turned off state, hit the wifi button, voice command button and power button, then release the power only and it will boot into the tri colored boot loader. then reinstall your image and soon you will be kickin it with your **** in it once again! booyakasha!
actually now that i think about it that will just go to the hard reset screen. you really just want to stick the stylus in the reset hole if you need to get to boot loader i think. i dont remember off hand.. just mess with it. if you break it just say you got it that way and exchange that ****
I installed the HTC Kaiser DLL replacement installer and then restarted my device. Now when it boots it won't go past the my info (owner info) screen. If I try to do anything at that screen whole device goes black and frozen I have to reset again. Anyone having this similar problem or know how I can fix it? I would really appreciate the help!
I was running WMobile 6.1 with the RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04 ROM
Once or twice somehow it got to the unlock screen but I can't get back there now I don't know how it got there the first times either just reset after reset.
Thanks
I was able to enter bootloader and reflash the rom. Held down camera button and used the stylus to push the little reset button next to usb port. Then ran rom updater as normal
when i upgraded my xda2 from wm2003 to wm6 it was working fine but i didn't have 30.53 free storage so i use ather90 Hima DOC Partitioner and i did get 30.53 storage memory but after few minutes while i was installing some 3rd party softwares the device got stuck i tried to hard reset it but it wont give displaymad: backlight wont open only shows imate on black screen)and when i tried to upgrade my rom i got this error "DOC VERSION IS ERROR" in Bootloader mode
anyone having this error pls tell us about it and how to solve this error
sorry for being a complete noob....
hmm werid, which bootloader version do you have?
try do a hard reset by pressing Camera+Record button and reset
the version of bootloader is 1.06 and i have tried many times to hard reset it but when i select no yes yes nothing happens the screen go completely black and windows does not start and heres the best part when i remove battery for a day
and then upgrade new rom the device works fine until it gets hang and after hang when i try to soft reset or hard reset the device nothing happens the os wont start what so ever i try to do.I think i have done something wrong with DIsk on chip formating for getting 30.56 free storage and i did get 30.56 free storage with a "doc version is error"
try to reverse the process hopefully that should do it, or i'll consult buzzlightyear
yes i have revesed the whole process by upgrading to wm6.1 sade and then i reversed the whole process by running ather90 Hima DOC Partitioner and have done everything exactly so i again got 14.60 factory default storage but the device again got stuck after some hours of use and when i again soft,hard reset it nothing happens now i have to again upgrade the rom and wait for the windows to load so that i can again comeback to wm2003 (the most weired thing is why device is not affected by hard reset means nothing happens when i do a hard rest after the device stuck)
one more thing i can only see 14.60 storage in start>>settings>>system>>memory but i don't get access to 14.60 storage means i cannot see its root or path in file manager.
ok here i am posting a screen shot of its missing from file manager.
now almost a month i've been trying to get my D810 live again. i know there are many similar problem, but still don't get idea how i can make it work again.
could someone point me another way to recover my problem?
right now my D810 is stuck at tricolor mode. i can't flash Hard-SPL from computer, always fails, when progress is about to begin suddenly, it's restarted. i did continue the process with recovery but the result is same, could not update.
i have also try miniSD way. i've copy ROM into it and change name to TRINIMG.nbh, it's ask for 'Press power button to update', when i press the button. the process is begin. at some percentage it got stuck again. the error message was:
"Update Terminated
UPDATE FAIL"
also have try to copy HardSPL nbh to pda. using this nbh, still ask for 'Press power button to update', when i press the button, process is begin, and success. But later i restart the phone, result is not good, this time is stuck at White screen with the HTC logo
that my problem, thanks. any suggestion are welcome and great thanks for it
btw at first i use Olipro 1.30 and update at latest radio and use FInixNOver, i did make a successfull Update, but later it got hang at bootloader, so i get reflash with olipro 1.1. got run again. but later got stuck again. for short. i've also try HardSSPL_ZakMcRofl, ROM team Cv93, Marry
success to bring alive
that one thing that i have not try and i just try this now, using splxploit
http://trinityguides.info/index.php?option=com_content&task=view&id=22&Itemid=68
follow the instructions, and bring me, not stuck in tricolor mode instead stuck in white mode. so i enter bootloader using special key. upgrade rom using romutility from computer, but at this step i got stuck again in progress (just 1% progress is pass). hmm then i try to update ROM via SD
and woaaah, it works. i got bring my D810 to alive again
thanks for all tools in here. it's all great tools
btw i think that in my mind, i still can't revert my HardSSPL, i want to revert to olipro 1.1, right now i use olipro 1.2. i have trying to reflash but it won't work.
Hey, that's another problem, another story. For now i just leave as it is and enjoying for several time. i really miss my D810. Someday i will try again to revert/change hardsspl
thanks all
johnyq said:
that one thing that i have not try and i just try this now, using splxploit
http://trinityguides.info/index.php?option=com_content&task=view&id=22&Itemid=68
follow the instructions, and bring me, not stuck in tricolor mode instead stuck in white mode. so i enter bootloader using special key. upgrade rom using romutility from computer, but at this step i got stuck again in progress (just 1% progress is pass). hmm then i try to update ROM via SD
and woaaah, it works. i got bring my D810 to alive again
thanks for all tools in here. it's all great tools
btw i think that in my mind, i still can't revert my HardSSPL, i want to revert to olipro 1.1, right now i use olipro 1.2. i have trying to reflash but it won't work.
Hey, that's another problem, another story. For now i just leave as it is and enjoying for several time. i really miss my D810. Someday i will try again to revert/change hardsspl
thanks all
Click to expand...
Click to collapse
Why don't you flash back to original rom....than install spl and follow by yor selected rom.
Mine P3600i was down for quite sometime.................I used splxploit ...works.
Hello everybody,
I have a bad problem with my diamond, yesterday I tried to update my Gen.Y 5.3 ROM with Memo 2.5.1.0 ROM.
After flashing, my diamond will restart, as always, but the first time it makes an error with trying install something like "windowslive.update".
After this error my device was blocked.
I had remove the battery and restart it, nothing to do, it remaing blocked into first black screen so you see the ROM version.
So I have make hard and soft reset but nothing.
So I have launched bootloader with volDown+Reset and reflash Diamond with Gen.Y 5.5, now my device starts (not always) but after a little second it blocked again.
I need to remove the battery, but always the ROM reinstall himself with reset of contacts,SMS and recalibrate e reinstall all programs...
anybody have any idea what can I do?