Database Develop

Fone locking on new Molski 3.3.0.0 rom

I have flashed this rom to my fone ok.
it started up, synced with a/s 4.5, evrything was ok.
i did a soft reset and now i cant get past the green windows mobile screen.
the green light is flashing and the start/end call buttons light up.
it wont turn off on the main power button, will only soft reset.
any ideas??
kieron

...it also lights up if you ring it.
it doesn't just go straight to answerfone as it would if it was swiched off or out of signal, so it must be connecting to the network....

Go to Bootloader (Hold Camera-Button + Reset) and flash ur operator Rom back!!!

sorted!!!
cheers dude

damn poxy fone
will not go to bootloader
any other ideas please?
ipl 1.01
spl 1.01
shows loading windows screen and that all...
os 3.3.0.0

most of the aku 3.3 roms require that you load a 2.* ipl spl rom first, then load the aku 3.3 rom.

What's to do!QTEK9100 hangs at subsplash

i upgrade my QTEK9100(g4) using a clean wm6 rom ,it shows succeeded,but push poweron button,it simply stop at the HTC logo ,and more, with all known way tried,i can't enter into the tri-color screen any more,PLS HELP!

big problem i my wizard G4 !!!!!!!!!!!

Hi all,
plz ,i have a big problem in my spv-m3000 G4
i flashed it with wm6 tnt 4
and it work normally ,after that i flash it with other wm6 rom and it stop flash in 99% ,then i reflash with other original rom and complete flash normally in boot after splash screen ,i dont know how i press reset then the device won't start
now only in charg if i remove the battery the red led on for one second
plz help me because in my country there is no repairing service for this model​

Can You access Bootloader? Tri colored Screen with IPL and SPL info
Some Wizards have an operator Flash screen which overrides the Flash screen that's supposed to show the IPL and SPL versions. In this case, you can try to enter the bootloader (by resetting the device (by pushing the stylus into the reset button at the right of the device) and then holding the camera button). This is from the Wiki for the Wizard

Tweakecho said:
Can You access Bootloader? Tri colored Screen with IPL and SPL info
Some Wizards have an operator Flash screen which overrides the Flash screen that's supposed to show the IPL and SPL versions. In this case, you can try to enter the bootloader (by resetting the device (by pushing the stylus into the reset button at the right of the device) and then holding the camera button). This is from the Wiki for the Wizard
Click to expand...
Click to collapse
thanks for reply
but the device don't start u have another idea like j tag or ??????????

any one help me plz

How to kick out X1i out of bootloader mode?

Hello.
One xperia entered tricolor screen (volume down + powering on) but now it cannot leave that screen, even if the battery is taken out for a minute.
Is there a way to kick the xperia out of bootloader mode?
The screen shows this, in this order:
RUUNBH (aligned right)
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707 (these last 4, aligned left)
Upgrade ROM Code Error (centered)
Please try again (centered)
Serial (centered)
(and it says USB if connected, of course)
I tried the 'reset' button but of course that didn't help.
I tried hard reset and it showed it was hard reseting, but after that, the same tricolor screen appears.
I tried also RUU with hardspl, and RUU with ruu_signed.nbh (supposedly UK official rom).
In both cases it goes to withe screen with the progress bar at 0% but stays there until you take off batery, then it returns to previosly mentioned tri-color screen.
Thanks in advance. HELP please!

Hi mate can you explain which rom you have tried to flash?

sumitescp - do you know what I can do - I start with the hard spl process it all works well and then it stops at the mulivolour sreen and I get an error message !

Hi
had the same prob, simply pulled the battery
Worked
Cheers
H

Didn't work for me...
hungarian said:
had the same prob, simply pulled the battery
Worked
Click to expand...
Click to collapse
It didn't work for me. I pulled the battery for 2 mins, nothing.
1 hours, nothing. 24 hours, nothing... it still turns on to the tricolor screen.
I let the battery die completely... then recharged it, and same result.
I think I need the proper ROM

where did you get your phone ?

help me about Olipro HardSPL 1.20

i have installed Olipro HardSPL 1.20 then i have installed wm 6.5 rom
and now the mobile could not boot
it goes to the splash screen and it stay at thes screen
what shall i do ?
can i remove (Olipro HardSPL 1.20)?
help me plz

Can it enter bootloader mode? Press and hold Power + Camera then press reset button. If it enters the multicolor screen and says Olipro 1.20 then try to install some other ROM. It may be that your ROM copy is corrupt.