Could someone please post a picture of the standard dialer in the Kaiser?
Here's a picture of mine:
Thank you.
This is the default WM6 dialer (not sure whether it has smartdialing enabled, but usually it does). You can try switching to the HTC dialer with KaiserTweak, but that might not work (if the dialer images are not on the phone). If it doesn't work - just revert back using KaiserTweak to the WM6 dialer . Personally I prefer this dialer with smartdialing because the contacts that were dialed before show up first when dialing a name...
Also - I think schap has a dialer too - something called reTouched or so. But I didn't try it...
Thank you
But I will need a dialer with local language support.
This is not the default WM6 dialer, This is the default WM5 dialer...
I was told the same in a local forum
The question is, which dialer can I install that will support other languages?
Another option would be to customize the skin of a dialer that I like and will fit the Tilt. In this case, can anyone point me to the exact steps required to do so?
Thank you.
Don't know about localizing. Regarding whether it's the WM5 or WM6 dialer, what's the difference? When I look at the screen it looks exactly the same as the dialer on my Kaiser (WM6) when I turn of the HTC dialer (using the reg-tweak or KaiserTweak).
Regards,
Nika.
Nika, could you please expand on that?
nikagl said:
When I look at the screen it looks exactly the same as the dialer on my Kaiser (WM6) when I turn of the HTC dialer (using the reg-tweak or KaiserTweak).
Regards,
Nika.
Click to expand...
Click to collapse
I use EZDIAL on my Tilt, and I had the default smart dialing turned on.
This resulted in the EZDIAL serch results being obscured by the smart dialing popup window (which basically emulates what EZDIAL does, only with a nicer presentation).
I then turned off smart dialing, and can now see the EZDIAL results on screen.
But the thing is, I wanted to use a nicer smart dialer than EZDIAL, and tried to install a localized one posted in a local forum by Nadavi (a distinguished member here), and it didn't work.
So I wanted to understand why this was happening, and was told that my Tilt couldn't have any other dialer than the default one (since I'm with the standard ROM, and I need a localized skin).
nikagl said:
Don't know about localizing. Regarding whether it's the WM5 or WM6 dialer, what's the difference? When I look at the screen it looks exactly the same as the dialer on my Kaiser (WM6) when I turn of the HTC dialer (using the reg-tweak or KaiserTweak).
Regards,
Nika.
Click to expand...
Click to collapse
its because you have a tilt as well.
original microsoft wm6 dialer:
original microsoft wm5 dialer:
HTC dilaer:
Does anyone know how to switch from the HTC dialer to the standard WM6 one?
The HTC dialer does not have soft 'Talk' and 'End' buttons, which I find very annoying...
What do you mean?
elivne said:
its because you have a tilt as well.
Click to expand...
Click to collapse
And I second the question regarding the ability to switch between the dialers.
Blacksheep said:
Does anyone know how to switch from the HTC dialer to the standard WM6 one?
The HTC dialer does not have soft 'Talk' and 'End' buttons, which I find very annoying...
Click to expand...
Click to collapse
Download KaiserTweak, copy KaiserTweak to your machine, Download the latest XML, copy that to your machine too, and use KaiserTweak to switch between the dialers...
Regards,
Nika.
elivne said:
its because you have a tilt as well.
original microsoft wm6 dialer:
original microsoft wm5 dialer:
HTC dilaer:
Click to expand...
Click to collapse
How can i change to HTC dilaer??? As on the second picture???
ze bediuk ma she shaalti oto...
That's the question...
As I replayed before:
I suggest the following:
1. find a full install of the dialer(I don't know of any).
2. change your rom to an HTC rom(much better! ))
3. find an answer at XDA....
wisniak, I replayed your question on ppcfreak.
Quickest way to the Dialer
This may be a silly question, but without opening the keyboard, what is the quickest way to get the dialer to appear on the screen?
emmit said:
This may be a silly question, but without opening the keyboard, what is the quickest way to get the dialer to appear on the screen?
Click to expand...
Click to collapse
Try Pressing the Green Call button on your device, that should bring up the dialer.
To change to the default WM6 dialer, which is actually listed above as the 2nd HTC dialer. Here is the registry key that needs changed:
HKEY_LOCAL_MACHINE / Security / Phone / Skin
Change the value of 'Enabled' from 1 to 0
Please note, that there is no video calling available using this dialer.
Just thought I would clarify a little bit on what these dialers actually are:
At&t WM6 Dialer:
HTC Touch style dialer:
Default Microsoft WM6 dialer:
Default Microsoft WM5 dialer:
I used Kaiser Tweak and the dialer definitely looks different now
I'll post an image later today.
njmarchetti said:
Just thought I would clarify a little bit on what these dialers actually are:
At&t WM6 Dialer:
Default Microsoft WM6 dialer:
Click to expand...
Click to collapse
Dude, you are absolutely wrong,
The first is the built in WM6 dialer, available on every WM6 phone edition (you can unhide it with a tweak manager) - all WM^ phone editions have it(never mind the colors)
The secound is the "smartdialing" HTC dialer - available only on HTC phone editions devices,(never mind the colors)
Here's what it looks now:
This is the dialer skin I have after using the Kaiser Tweak.
EZDIAL does not come up, even though it's properly installed.
Hi all,
reading the problems that exist with the diamond when there is an incoming call (you always accept or refuse the call very easily) I was wondering if could it be possible to install a smartdial from the p3300 to the diamond.
I think you can diasable the diamond dial skin using "AdvanceConfig". MAybe we could disable this and install after a smardial skin like in P3300.
What do you think?
Thanks in advance...
I was stunned by the fact that my MDA Compact IV still has the ancient Calculator looks. I am really puzzled as to why this isn't faced up like the diamond looks
luckily I found this one VGA skin for the calculator:
http://forum.xda-developers.com/showthread.php?t=413583
sorry dumped this message into wrong section :-( belongs in themes& applications
This skin is for the SPB Calculator not the default WM one.
MarcLandis said:
This skin is for the SPB Calculator not the default WM one.
Click to expand...
Click to collapse
So could you explain to me why it works just fine on my Diamond which hasn't got SPB Calculator installed?
Dialers, dialers , large dialers, kaiser dialers, tilt dialers dialers
after searching , i found it is kind hard to find all the different ones available.
So lets start a depository of them here and try to update them often as new one come out. this is should be easier to be found
touch+dual
http://forum.xda-developers.com/showthread.php?t=354380&highlight=touch+dual
Opal/Jade
http://forum.xda-developers.com/showthread.php?t=430354&highlight=dialers
read post 4 & 5 in this link
http://forum.xda-developers.com/showthread.php?t=431921&highlight=dialers
DIAMOND_DIALPAD_redesign
http://forum.xda-developers.com/showthread.php?t=408005&page=1
finger-Friendly Friends
http://www.jotto.no/fff/
some good info here below on finger friendly pads
http://forum.xda-developers.com/showthread.php?t=376271
point ui cab
http://www.pointui.com/Home.aspx
IPhone Dialer Skin
http://forum.xda-developers.com/showthread.php?t=380466
Minimal DIALER (REDIAL AND SMARTDIALING!!)
http://forum.xda-developers.com/showthread.php?t=395086
3G Dialer Skin by pistonripper
http://forum.xda-developers.com/showthread.php?p=2351342
Dialer with bigger buttons
Wizard_reTOUCHed_Dialer2.cab & M&M_Marshall_DialPad_Skin_0.18
http://forum.xda-developers.com/showthread.php?t=372562&highlight=dialers
Bump, okay I just used the search here in the Kaiser section and this thread showed on the first page, which I hope will make it easier to find the latest dialers....
are there any more dialers that should be added ?
F2504x4 said:
Bump, okay I just used the search here in the Kaiser section and this thread showed on the first page, which I hope will make it easier to find the latest dialers....
are there any more dialers that should be added ?
Click to expand...
Click to collapse
My contribution to the XDA community:
Combo HTC 3G Dialer and Smartdial (13 Sept 2008)
http://forum.xda-developers.com/showthread.php?t=425937
Dialers found by gfreek ****some of these may be listed already****
Default 3g dialer Skin!
Alll right guys I can see there seems to be a lot of request for 3g dialer, now I have done some search the ones' I have found are as follows:
Dialer 3G Type Kaiser and Iphone (By Duronmarcel)
http://forum.xda-developers.com/showthread.php?t=321605
zard by
Default Combo HTC 3G Dialer and SmartDial (13 Sept 2008)
http://forum.xda-developers.com/showthread.php?t=425937
touch dual like 3g dailer: http://rs87.rapidshare.com/files/791...ch_dialler.zip
onEdit: I am geting a 404 code on the two links below
http://forum.xda-developers.com/show...postcount=1007
http://forum.xda-developers.com/show...27&postcount=3
New skin developed by snachez the Minimal dialer.
http://forum.xda-developers.com/showpost.php?p=2930045&postcount=8
iPhdyle's new Skin for Minimal Dialer by Paul De Groots
http://forum.xda-developers.com/showthread.php?t=435990
link for Paul De Groots fantastic Minimal Dialer
http://forum.xda-developers.com/showthread.php?t=395086
Note the cab attached makes the redialer and smart dial work 100%!
See link below
http://forum.xda-developers.com/showpost.php?p=2954254&postcount=25
Hi everyone!
Nice and quite straight forward dialer! Thanks! Minimal DIALER (REDIAL AND SMARTDIALING!!)
One thing: is it possible to somehow add a feature when pick-up there is a small vibration?!
It would be very usefull, thanks?
dnk-kaiser said:
Hi everyone!
Nice and quite straight forward dialer! Thanks! Minimal DIALER (REDIAL AND SMARTDIALING!!)
One thing: is it possible to somehow add a feature when pick-up there is a small vibration?!
It would be very usefull, thanks?
Click to expand...
Click to collapse
I'm looking for a dialler that does that too... I used to have it on an old rom that I was using but i'm using Gs rom at the moment and the dialler doesn't have the vibrate on connect feature.
Bump for any new dialer's ?
update
http://forum.xda-developers.com/showthread.php?t=396505
I honestly didn't know nobody made a dialer for the Diamond. So when I was flashing and spending the last 32 hours perfecting this phones build, thinking I would be able to find a nice dialer that is nicer than the stock HTC one, I was sadly mistaken. I didn't chose a dialer in BuildOS. so I'm on the old ugly dialer from the 70's... and everytime I install a dialer I find claiming vga, it is a small fraction of the screen...... Like not even half the screen, more like 1/3rd to 1/4th of the screen size in the top corner.
What can I do? I hand this phone to the customer at 4...
Hi,
What kind of dialer do you have : htc or WM or tachi ?
If you want a skin for htc dialer so try mines HERE
I didn't install one! So it ended up the old ass 70 year old windows mobile dialer. And every single skin I install, Except one of the beta test ones by PaulDeGroot, ends up tiny tiny up in the left hand corner of the screen. And the tiny buttons work to! The TouchFlo test one he did for VGA comes out as the right size, but still is trippy since the background is transparent and you can see the Titanium in the background. I need a way to upgrade the WM to the HTC Style... How can I do that?
ok I understand now : You have WM6.5 and the WM dialer right ?
Well It's possible to install the htc dialer but it's buggy with contacts manager under WM6.5. I suggest you to stay with WM6.1 for now if you prefer htc Dialer with larger keys.
BTW, the great DomSim made a cab to have htc dialer instead of WM, look here : http://forum.xda-developers.com/showthread.php?t=518810
Choose VGA ones for your diamond, he made cabs so it's easy to install and to uninstall.
regards
lol I'm sorry. WM6.1 blows! How is 6.5 buggy? I just said screw it and reflashed with the Stock HTC Diamond/Raph dailer. Fell asleep setting things back up since I haven't slept in a couple days workin on this damn thing for this lady... just cause she's cute! .