Database Develop

Jabra BT 800 and Broadcomm 3900 upgrade

:? Hi guys Just wondered if any of you guys are experienced problems with the Jabra bt800 working intermittently. Sometimes it works but most of the time it does'nt . I've upgraded to Broadcom 3900 and although blue tooth audio still crackles its not as bad.. The headset works alot better with my SPV C500.. Any ideas or experiences :?:

bt 800
hi i have xda2s with bt 800 working somtimes
i upgradeed to bt3900 but i see no change
somtime i takes 5-6 kye presss to unswerr a phone call
i do not have any audio problem the audio is ok

glad to know i am not the only one.. cheers for replying

did you try to contact jabra support???

I have a contact in GN Netcom so will have a chat with him next week and post the response here

thenks :wink:

:? Ok after talking to my contact in GN Netcom we have come to the conclusion (seings as it works fine with my Motorolla V3 and Nokia 6810 and 6820 and Siemens SK65) that the issue lies with the Bluetooth stack on my 2s.I did explain about this that i had upgraded it to the newer version and i personally believe they have not totally replicated the way the Bluetooth in the xda2s behaves the same as a normal bluetooth enabled phones.
I believe that because it works fine on most of the Manufacturers phones and the XDA's of this world are low priority to get it right.. I still believe it will be fixed in future Bluetooth upgrades on the xda2s.. doh still think that even though the display and buttons work intermittently it is still worth having for the DSP

The problem still exists!
I have Qrek 9090 and Jabra t800. Audio is very good and also on the good range.
BUT...
Main problem (even with Jabra 800 fix CAB file) is that I can't normaly answer the phone call. It takes about 5 or 6 times before I can reply the call. And also, it takes about 2 seconds before I can hear other side opponent.
I just wonder if you people have some kind of this problem. Any expirince. Could you please share with me some information.
I use Danghard rom 1.44 wit BT 3900.
Thanks a lot.
Leonid.

Update to Latest Ow2 ROM...the BT 3900 workd flaw lewssly.I hv tried BT with SE HBH 30/262 etc Blue Trek G2 and no problems....Also with Motorolla 810...
Moreover, Motorolla and Bluetrek supports voice dialing too :lol:

Thank you, but I'm talking about Jabra BT 800, cause it has so many features that I need. So, I would like that my Jabra headset will work fine with Qtek 9090.
Guys, please help! :lol:

Guys! Really need your help.
I used before another headset and didn't have any problems. But after I bought Jabra BT 800 I got serous problems. It really takes about 6 rings before I can answer a call. So, a lot of people just hang up and I have to call them back. :evil:
Nothing really helped. :evil:
I'm confused, cause I really like this headset and would like to use it.
HELP!
:lol:
Thanks!

hdubli said:
Update to Latest Ow2 ROM...the BT 3900 workd flaw lewssly.I hv tried BT with SE HBH 30/262 etc Blue Trek G2 and no problems....Also with Motorolla 810...
Moreover, Motorolla and Bluetrek supports voice dialing too :lol:
Click to expand...
Click to collapse
Voicedialing? How?
I have a HS810, it works fine, but how do you have voicedialing with it?

Moreover, Motorolla and Bluetrek supports voice dialing too
Voicedialing? How?
I have a HS810, it works fine, but how do you have voicedialing with it?
well I too own a Bluetreck G2R and a lot of crackling sound I have upgraded my BT stack to 3900 and most of my callers only hear the crackling so I have to swap my call to the phone and talk or have to call them back
also how do u use Voice dailing on the bluetreck for my xda IIs ???
can some one help me ?

Hi..use search,,,still this is how to do a voice dialling:
1) Install MS Voice command and assign a Hardware button(any) to activate the software so that it an listen to our commands.
2) Now, just press the "Call answer" button of your BT.By doing so it will activate the sound on your 2s.Then press that harware button of Voice command and speak...
It works flawlessly

Thanks
thank s
Ill def try going to Delhi, will return and sure thry Voice dial and re-install my BT stack to see if there is crackling sound still there
also how long can you try to distance your phone from the BT
I got one Jabra bt800
its superb and must say its a best one around with lots of features

Eehheh and you call that voice dialing?
If i had to do all of that to voice dial i could also press the button on the device and talk the name to it. And that would be one click less than with your solution.
I think the idea of voice dial with bluetooth is to keep the phone in your pocket and do the talking via bluetooth only.
hdubli said:
Hi..use search,,,still this is how to do a voice dialling:
1) Install MS Voice command and assign a Hardware button(any) to activate the software so that it an listen to our commands.
2) Now, just press the "Call answer" button of your BT.By doing so it will activate the sound on your 2s.Then press that harware button of Voice command and speak...
It works flawlessly
Click to expand...
Click to collapse

Re: Thanks
spread_smiles said:
thank s
Ill def try going to Delhi, will return and sure thry Voice dial and re-install my BT stack to see if there is crackling sound still there
also how long can you try to distance your phone from the BT
I got one Jabra bt800
its superb and must say its a best one around with lots of features
Click to expand...
Click to collapse
But can you tell me. Do you also have such problems with Jabra 800 as I have. The sound of BT and range is best. But what about time to answer the call. I press answer button hundred times to be able to speake with opponent.

Hi again guys.
Still can't solve my problem with BT 800.
I contacted with several companies but didn't get any correct answer.
Really don't know what to do.
Can you please tell what exactly this CAB file from FTP fixes cause nothig changed since I installed it.
Thank you and please foget me for bothering you.
Leo.

Gentlemen,
After a week or so exploring this forum and experimenting with my Logitech bluetooth hands free I've got a feeling that the only possible solution for the moment is to prevent the BA from getting into the sleep mode. Use ScreenLock or Mort Saver instead.

Solid_Lynx said:
Gentlemen,
After a week or so exploring this forum and experimenting with my Logitech bluetooth hands free I've got a feeling that the only possible solution for the moment is to prevent the BA from getting into the sleep mode. Use ScreenLock or Mort Saver instead.
Click to expand...
Click to collapse
Well, thank you.
But as I understood from different threads in forum this is one way.
But... I'll kill battery of PDA very quickly. Really don't think that it's a good idea.
People from Jabra told me that new firmware will come soon and will help to solve this problem.
So.. I think that it's not the fault of PDA or ROM... :?

MS Voice Command 1.6 Retail runs on AKU3.2

FYI
Just installed MS Voice Command 1.6 Retail (1.60.4622.0) and it seems to run fine on my AKU3.2 1.3.2

Does it work over bluetooth handsfree voice dial activation?
Mr_Ding
do you use bluetooth handsfree to voice dial?
i have been trying to get it working with IIs with no luck (I use ITech mini II bt handsfree + XDA IIs)
If not, I guess Cyberon voice dialer is better than VC1.6 - less memory and very accurate.
cheers

No, haven't tried bluetooth handsfree.
I defined 1 hardware button as Voice Command, press it, then I say "Call Mary at home" for example.
Will try next week (have my BT headset at work, since I hardly use it)

joseph.sapri said:
Mr_Ding
do you use bluetooth handsfree to voice dial?
i have been trying to get it working with IIs with no luck (I use ITech mini II bt handsfree + XDA IIs)
If not, I guess Cyberon voice dialer is better than VC1.6 - less memory and very accurate.
cheers
Click to expand...
Click to collapse
Check this thread for a cab file that allowed me to get VC to work via BT...
http://forum.xda-developers.com/showthread.php?t=283412&page=5

more questions
ercave1,
Thanks for the info. I checked the forum and got the cab file. At the moment I have not tried it, however got some questions:
1. After installing VC1.6, wireless icon disappear from the tray... where has it gone? does it affect wireless funct? After uninstalling, the icon comes back... weird...
will try the cab later and give feedback...
cheers

Many asked why Voice Cmmd works well on 8125 but not Kaiser/tilt

There have been several threads where members have commented that Voice Cmmd 1.6 worked very well on 8125 but not on Kaiser/tilt (or on the 8525)- the problem is poor recognition through the phone mic (not through BT) - VC worked great on the 8125 but not on either the 8525 or the 8529/tilt. admittedly some say they do not have the problem but others do (as do I on both the 8529 and 8525)and I can not find any explanation - it seems like the mic is either too sensitive or not enough - I have tried switching the ACG mic to either enabled or disabled with no clear difference in performance of VC recognition
Sooo..
- does anyone have any ideas ?
- are there any ways to adjust the mic other than just enabling/disabling ACG?
THANKS!

I can add that Voice Commander does not support the Kaiser as well.
?Glitch

?Glitch said:
I can add that Voice Commander does not support the Kaiser as well.
?Glitch
Click to expand...
Click to collapse
It works fine on my Att Tilt, VC version 1.6, no worries.

Voice command works just fine on my unlocked TyTN II

greg3d said:
Voice command works just fine on my unlocked TyTN II
Click to expand...
Click to collapse
Same here - works great.

Bratag said:
Same here - works great.
Click to expand...
Click to collapse
Same experience. In fact, mine works much better than it ever did on my Eten M600 and until recently my Dopod 838 Pro over WM6 (aka HTC Hermes/TyTN). Do that note that I use mine with a BT headset with the TyTN II (Kaiser) and I no longer have to install hacks for it to work when the BT headset button is pressed. Everything works after first install.

I replaced my 8125 with a tilt. I had VC1.6 on both. it works the same on both. both work well. people just like to whine

It works great on my AT&T Tilt as long as I use my headset. When I don't it's pretty crappy, by luckily for me only time I want to use voice command is with my headset.

the people that are having problems should turn on AGC. i dont have to as it's usually quiet around me and I speak loud and slow, without mumbling

I'm wondering if those that are having no problems with Voice command are finding the same one issue I have found. The one feature that does not work for me is the caller Id annoucement in your BT headset when a call comes in before you answer it. The VC features list states this is a feature but it has never worked for me. How about you guys?

Voice Command works MUCH better on tilt / kaiser if you turn "ON"
automatic gain control in phone settings.
DLD

I have to agree. I had AGC off and I had trouble with voice command, I read a thread that said to turn it on and now I do not have any problems.

Strangely, in my limited testing, I got better results with it off.

I have tried VC1.6 both with and without hacks and I am unable to get it working from the BT headset button. Worked fine on my Hermes though (with hacks).
I guess I might need to do a hard reset but then i have to contact Tomtom to get a new ID licence from them

WM6 and bleutooth carkit

Hello,
Just upgraded to WM6 using the official Palm upgrade (TREO750-2.23-RWE).
The Treo is unbranded and came with WM5, also an RWE ROM.
The most important issue I currently have is terrible bluetooth interaction with my car-kit. Pairing is OK, I can start or receive a call, but there is no sound. Before, with WM5 I had no issues.
Setup:
- Treo 750
- WM6 (TREO750-2.23-RWE)
- Pegeuot RD4 radio with integrated bluetooth
Any solution? Or should I downgrade to WM5? If so, how should I downgrade?
Your help is most welcome!
David

Odd... With both the Treo 750 running WM5, I had the same problem. Basically, the first 30-60 seconds of a call wouldn't sound on either the handset, or the speakers over the bluetooth connection. This was always for the first call after getting in the car. To get around it, I would get in, start up the car, and call my voicemail. Once I could hear the call on the speakers, usually 30 seconds later, I would hang up. I could then make and receive calls normally.
After upgrading to WM6, incoming calls would occasionally be very low volume. I would have to hang up and call the person back. This also happens with WM6 on my AT&T Tilt.
No fix for that one....
daupers said:
Hello,
Just upgraded to WM6 using the official Palm upgrade (TREO750-2.23-RWE).
The Treo is unbranded and came with WM5, also an RWE ROM.
The most important issue I currently have is terrible bluetooth interaction with my car-kit. Pairing is OK, I can start or receive a call, but there is no sound. Before, with WM5 I had no issues.
Setup:
- Treo 750
- WM6 (TREO750-2.23-RWE)
- Pegeuot RD4 radio with integrated bluetooth
Any solution? Or should I downgrade to WM5? If so, how should I downgrade?
Your help is most welcome!
David
Click to expand...
Click to collapse

daupers,
Just curious that this might be related. Can you post what radio version you ended up with after the upgrade to WM6?

Dropped the issue at Palm
Yesterday I sent an email to drop the issue at Palm, since I used the official upgrade on an official pristine Treo. I still have to receive an answer.
I'm wondering if I ever will receive an answer that will resolve my issue.
Did anybody else on this forum ever get help from Palm?
David

Im heaving simmilar problems with Treo 750 WM5 and Toyota original BT-HF. Repatedly the connection is established, but then lost (without warning) - and then you get no sound (or an odd "interferrence " sound). I switch the BT off, then on, connect it again and it (usually) works fine. I assume it has smthng to do with the BT firmware. No other solution so far.

Where can I find a download for the original RWE WM5 ROM?
Can anybody provide me with a link to an WM5 RWE ROM for the Treo 750 (Cheetah)?
Thanks

I did some searching and so far I discovered the following.
WM 5 supports bluetooth 1.2.
WM 6 supports bluetooth 2.0, which should be backwards compatible with 1.2.
The carkit supports 1.2, but I'm not sure if it supports 2.0.
It looks like a compatibility issue, caused by the upgrade.
Could this be the source of the problem?
D

The hardware in the 750 supports 1.2 only, WM6 is backwards compatible with 1.2. Any device that supports 2.0 will be backwards compatible with 1.2. I just upgraded to the AT&T official WM6 build and am still having the same problems as always with my Moto HF850, no voice command, only get one working connection before the bond fails and I get no audio. *sigh*

I have the same problems Treo 750V 2.18-VFE with WM6.
Car: Citroen C4 with integrated bluetooth radio.
My car connects fine to the Treo, however when I make a call or answer a call 9 out of 10 times I have no sound. Currently I have to use the wired headset.... While I have no sound the connection is intact and I cannot use the Treo itself without cancel bluotooth from the menu.
I can read the indexes of the phone, make calls by using car functionality but no sound. Also when I have sound most of the time it's after ten seconds.
Since yesterday I also have no ringer sound anymore. Palm Support gave me an update but it's not for my ROM version.
I'm affraid I have to ask Palm to swap the phone again. Currently this is number 3:-( within a few months

BT working after WM6 upgrade
Hi everybody, surprisingly, after upgrade to WM6, my BT connection with toyota original handsfree started to work, I haven´t had a single "lost connection" since. Why is that I don´t know... Just to let U know - More lucky than the others...

I Received my fourth Treo last week. I now have ringer sound again (for now).
However I still have the sound problems with using my carkit.
My car connects fine to the Treo, however when I make a call or answer a call 9 out of 10 times I have no sound.

I get the same problem with an Orange SPV M3100 (HTC TYTN) and by factory fitted bluetooth kit in my Citroen C4... It's fine using the latest Orange WM5 ROM, but upgrading to WM6 stops the car kit from working, (connects, but no sound). I asked my Citroen dealer and they advised it was a known issue with 'high end phones like Nokia running Symbian, etc'. They had no idea about when a fix might be available.

Delayed or Missing Sound
Install the sound fix. That's what is there for.

What sound fix? Can you post a link, or let me know where it is?

Support also advised me to install the sound fix.
However it only work for lower rom versions.
When you install WM6 You will have a higher rom version.
The sound fix should allready be in WM6.
I think I'll try to contact Citroen about this...

Bluetooth Handsfree on MEX-BT2500 - Incoming Calls don't Work

I have an MDA Vario III branded phone using the HTC ROM 1.56.405.5 and a sony MEX-BT2500 (Bluetooth enabled stereo with A2DP).
http://www.audio66.com/product.asp?id=5616&cat=1&man=6&main=1&userid=&firstsel=cat&variation=
The A2DP works well (except it's a pain to enable/disable it using the WM6 interface!) and I can make outgoing calls fine with the phone paired with the Sony but when incoming calls come in, the ringer is routed to the stereo but when I answer it the voice doesn't and I have to hang up and call the person back.
I paired my work Nokia with the stereo and both incoming and outgoing calls work fine.
I tried the original T-Mobile ROM and still had the same trouble.
I'm assuming (with no knowledge of what I am talking about) that the bluetooth stack on WM6 has some issue with routing incoming calls but I can't find any reference to this problem anywhere else and it would seem to be the kind of problem I'd expect millions of users to have a problem with and that there would be a lot of posts.
Does anyone else use bluetooth handsfree? Does it work properly? Does anyone use a bluetooth stereo and A2DP? Does it work properly? Does anyone know if there's a fix?
Thanks for the info in advance...

mine works Ok with my BT2500 although sometimes it needs to be re-paired

Info
Can you tell me what ROM version you have and what model your phone is, radio version, installed programs etc? so I can try changing things.
If you hae a2dp music being streamed and a call comes in does it still work?

ROM is UK Vodafone out-of-the box original (v1615 = Tytn II) 1.56.161.4
Radio is 1.27.12.11
Have Seuth255's A2DPFix from the Hermes forums (prevents skipping)
MS Voice Command V1.6 (i have a SE BT headset too)
Remainder are general apps, gps etc.
haven't tried a call when music is streaming. will do later and let you know

Works for me too, with the original HTC ROM.

Everything is working fine here. I have a MEX-BT2507X, and there's some random 0.2sec cut every 15mins of playtime, but that's not a problem.
Have you used the quickfix from HTC?

jym04 said:
Everything is working fine here. I have a MEX-BT2507X, and there's some random 0.2sec cut every 15mins of playtime, but that's not a problem.
Have you used the quickfix from HTC?
Click to expand...
Click to collapse
I didn't know about the HTC Quickfix. I've just downloaded it and installed but haven't got round to leaving the PC to test it yet. I'll give it a go later and post back.
Fingers crossed...

Audio not working
My audio is not playing through the car speakers with the BT-2500. I had it professionally installed, but was running late to class so I didn´t fully test it until I got home a few hours ago.
I can control the tracks and play/pause, accept/end calls, and the dash microphone works, but my audio is not being pushed and played for some some reason (does work for CD, and Radio). I tried repairing numerous times, resets, and different programs, but no luck... but audio push worked great on a handsfree kit.
any ideas are greatly appreciate... I will take this back to the shop tomorrow, but I would like to know if anybody else experienced this and how they fixed it.
Thanks!! =)
btw, I use stock AT&T rom

eayuwna said:
I didn't know about the HTC Quickfix. I've just downloaded it and installed but haven't got round to leaving the PC to test it yet. I'll give it a go later and post back.
Fingers crossed...
Click to expand...
Click to collapse
...much, much later...
I finally got round to trying it out and even with the quickfix I still have the same problem. My mate also has a Kaiser so I borrowed that (UK O2 ROM I think) and that doesn't work either.
Most odd. maybe I'll ring Sony.

I have the same problem with my Jabra 620s. Maybe somethings wrong with the headset itself?

Can you let me know ur ROM, radio versions so I can see if we have anything the same.