Database Develop

MiniSD will not run programs..or anything else!

Hey all, i know there are many miniSD problem threads, but i wasnt able to find this particular one...
I just got a PQI 2GB miniSD, i formated it with SKTools, and started installing some programs...installs go fine, but when i try to run the programs, it says that its not signed with a trusted certificate, or one of its components cannot be found. i get that msg with all the programs i install...and nothing works on it!!!

Use file explorer to see if you can browse the card. The error you have seen usually mean that the device is unable to read the card. You will need to reformat the card again. I usually do it in my laptop using a card reader.

i can browse it...it gets detected with the right amount of size and everything...my preveious card was a 256 MB and it was always good...

Copy everything in the card to your computer. Reformat the card but using your computer this time. Copy everything back to the card.

ive tried that too!! still nothing...

In that case I am running out of idea I am using the same PQI and have no problem with my Wizard. You probably get a defective card. Maybe it's time to page the vendor for a replacement card.

Usually if you just format it in via the computer, it should work. Try formatting it twice in succession and if it still does not work, you might have a defective card like imisim said above.

Guys, stop confusing...
It has nothing to do with a memory card.
And you Malik use search next time!
Here's the solution -
http://forum.xda-developers.com/showthread.php?t=249863&highlight=trusted+certificate

rottie said:
Guys, stop confusing...
It has nothing to do with a memory card.
And you Malik use search next time!
Here's the solution -
http://forum.xda-developers.com/showthread.php?t=249863&highlight=trusted+certificate
Click to expand...
Click to collapse
i did use the search, and that didnt work..there is no solution on that page, it didnt work for those who had the problem...

rottie said:
Guys, stop confusing...
It has nothing to do with a memory card.
And you Malik use search next time!
Here's the solution -
http://forum.xda-developers.com/showthread.php?t=249863&highlight=trusted+certificate
Click to expand...
Click to collapse
It has everything to do with the memory card because the solution you have posted won't work and doesn't apply to the OP. The solution only apply to a few applications which doesn't have the "sign-code/certificate". After you have signed the code and it will work for those apps.
The OP problem is that none of the installed programs will work, not just one or two none signing certificate (BTW, most of the none signing apps are usually warez/cracked ) The OP problems are mostly due to the memory card itself.

storege card

I manged to format my internal card to fat 32 on my diamond whit my pc
I know i am stupid?!
Do anyone know how to restore it so it is working properlly.
the internall card is samsung moviNAND 4gb.
Plz tell me how to fix it!?

earl66 said:
I manged to format my internal card to fat 32 on my diamond whit my pc
I know i am stupid?!
Do anyone know how to restore it so it is working properlly.
the internall card is samsung moviNAND 4gb.
Plz tell me how to fix it!?
Click to expand...
Click to collapse
Allready tried to reformat it from the diamond? If this not work, perhaps this tool can help: http://flash-format.en.softonic.com/pocketpc
If both fails it is really dangerous to have a corrupt file-system on the diamond.

Token42 said:
Allready tried to reformat it from the diamond? If this not work, perhaps this tool can help: http://flash-format.en.softonic.com/pocketpc
If both fails it is really dangerous to have a corrupt file-system on the diamond.
Click to expand...
Click to collapse
Thanks for the tip!
I traied to format whith the diamond but it says that its missing nand flash?

Take a look, if the internal storage has the same name as before. If not, perhaps you can rename it from the pc via active-sync. Good luck!
Nobody else with an idea about this? If nothing works for the threadstarter, this means: as soon as the FAT of your internal storage gets corrupt, (whyever) you have bricked your device more or less, (at least reduced the memory to a laughable tiny amount).
If this is the case, it can only be a very, very bad joke of HTC. It's like you have a big button in Windows Vista wich destroys your harddisk and nowhere is a warning sign or a safety-mechanism - that can't be true, or? (Its not a good example, cause you can exchange a PC's harddisk).
I think there are a lot of reasons, why a FAT can get corupted. (Tools on the PDA, sudden power-loss) and I'am wondering if no one here is a little bit concerned about this.
I've used the 2GB SD-card in my last PDA over a long period and during this, it was several times corrupted, so that I had to reformat it.
In the German PPC-Welt forum someone has posted the same issue, he returned his device, but this is only possible in the first two weeks, at least in Germany.

1. When you hard reset you have the option to format Internal Storage.
2. You have the option to format Internal Storage in Clear Storage in settings.

tnyynt said:
1. When you hard reset you have the option to format Internal Storage.
2. You have the option to format Internal Storage in Clear Storage in settings.
Click to expand...
Click to collapse
He can only format the storage, if it is found by the device. Obviousley this is not the case. Perhaps renaming helps. In this (German) thread, the same problem has been discussed: http://www.ppc-welt.info/community/showthread.php?t=133023&highlight=fat32
Finaly ther user in this thread was able to format the storage but it was still not correctly recognized by his apps.
I hope the creator of this thread has more luck.

[Help Please] Micro SD Card

Hi
I have 2 gb micro sd card and I want to format it using Resco file explorer. But it keeps telling me to check to see if its unlocked.
I use to be able to format without a problem. But i have recently started to flash roms. I can put stop and take stuff without a problem. Just won't let me format.
I also tried formatting using my laptop, but won't work.
EDIT: Sorry, wrong place. Wanted to post this in general Kaiser forum.

Is the little write protect tab on the side of the sd card in the right position??

i moved it off the lock position and nothing? my comp won't even let me right click it. when I click to open it, says needs to be formatted and when i click format PC says it can't be formatted.
I searched on here, but no thread about this type of problem. card isn't ruined because i can still add and delete stuff.

I never experience this issue .. quite confusing.
However, this should be posted in General forum, not ROM Development. Mod, please move as such ..

tilt4life2 said:
Hi
I have 2 gb micro sd card and I want to format it using Resco file explorer. But it keeps telling me to check to see if its unlocked.
I use to be able to format without a problem. But i have recently started to flash roms. I can put stop and take stuff without a problem. Just won't let me format.
I also tried formatting using my laptop, but won't work.
EDIT: Sorry, wrong place. Wanted to post this in general Kaiser forum.
Click to expand...
Click to collapse
Could be a problem with the card / slot connectors. Try with some other card reader.

I had an issue once where I couldn't format my card - I had no lock errors though, just couldn't format through the PC or with PPC programs.
Eventually I installed 'Flash Format' by CNetX (google it) - it formatted first time on the free evaluation version.
Worth a try if you're about to bin it!
Good luck.

brandall said:
I had an issue once where I couldn't format my card - I had no lock errors though, just couldn't format through the PC or with PPC programs.
Eventually I installed 'Flash Format' by CNetX (google it) - it formatted first time on the free evaluation version.
Worth a try if you're about to bin it!
Good luck.
Click to expand...
Click to collapse
You sir are a genius and a life-saver!
This product is a magical potion for the microSD card. I tried so many different things online, on the laptop, and the Kaiser and none worked. This thing took less than a minute and formatted with the click of one button.
Mods, please move this thread. Hopefully it can help others who might have this problem in the future.
Thank you very much sir!

Glad it worked - it's very strange that this little program seems to be able to sort the issues that even the premium programs can't....

I have a big problem!!!

Hello, I think, I have a big problem...
1. My phone does not read the SD card, but yesterday all was ok, and now i can't put a new rom
2. i have deleted the boot and the recovery and i couldn't install them, because my phone don't see my SD card...
BUT: when i put a DREAIMG.NBH file and try to install it through the fastboot, it is seen by the system and it starts to install the rom, but there appears an error, that it's wrong device ID of my phone... please somebody, help me

hardmusicfun said:
Hello, I think, I have a big problem...
1. My phone does not read the SD card, but yesterday all was ok, and now i can't put a new rom
2. i have deleted the boot and the recovery and i couldn't install them, because my phone don't see my SD card...
BUT: when i put a DREAIMG.NBH file and try to install it through the fastboot, it is seen by the system and it starts to install the rom, but there appears an error, that it's wrong device ID of my phone... please somebody, help me
Click to expand...
Click to collapse
have you already tried taking out your sd card and puttin' it back in?
b.t.dubs...your question should really go here: http://forum.xda-developers.com/forumdisplay.php?f=507

hi
ok first off u need to partition ur sd card again., but tell me how much gb is ur sd card?

jibbz said:
ok first off u need to partition ur sd card again., but tell me how much gb is ur sd card?
Click to expand...
Click to collapse
my card is 4 gb, but it works properly with other phones, that i tried, and other sd cards don't work in my phone

hardmusicfun said:
my card is 4 gb, but it works properly with other phones, that i tried, and other sd cards don't work in my phone
Click to expand...
Click to collapse
Might have a dead/faulty sdcard slot,old parts tend to fail.

ok what you have to do now is download this program called paragon partition manager jus google it n it should be the first link., after downloading the manager open it n locate ur sd card (also u do need a sd card adapter so make sure u have the one tht came with the phone or any onther in this case.,) after u have located the card patition it., to do this u have to choice how much space u want for ur ext 2 ., i choice about 300 to 350mb range leaving me with about 3.6gb left for my personal use., after u choice the amount u want for ur ext 2 start the partition it should be a few mintues., after tht put the memory card into ur phone check if it works., i did this same procedure n worked jus fine for me., hope this helps you out., if not post back the problem.,
jibbz

any reason why a second thread (both created by you, on the same topic) is nessicary???
i gave you a few specific instructions last time....
first, repartition the card (using paragon, or a ubuntu live CD) if it doesnt work then you
can try a fresh format on another SD card... if niether work then you just have a faulty slot (assuming you are on a stable/Stock rom that you know works)
and YES FASTBOOT can recognize a card while the rest of the phone wont(personal experience), dont ask me to explain it, but if you had even read my last post in your other thread youd have know that......
your G1 is probaly just old.... get over it.... it was always intended as a Beta/Dev device....
and you HAVE been reported for spamming the forum with multiple threads on the same topic (in the wrong section this time no less)..... and dont ***** and whine about no-one checking the q-a sections.... it cuz fsck-balls like you spam useless ****

MOD EDIT - Please abide by forum rules and only post a query once. No need for duplicate threads. I have deleted previous thread
Rick
5. Post a message only once.
As a large forum we don't need unnecessary clutter, You're free to edit your message as you like, so if you do not receive an answer revisit your message and see if you can describe your problem better. Not everyone is online at the same time, it might take a while before you receive an answer.

[Q] the file haret cannot be opened.

please helpwhen i run haret.exe the following message appears" the file haret cannot be opened. either it is not signed with a trusted certificate, or one of its components cannot be found. if the problem persists, try reinstalling or restoring this file."

Use another Haret from other ROM.

I have the same problem for my Rhod100. Even installing the .cab file doesn't work. This problem is since this morning. I copied the file for many time and from different people but nothing is working.

Pythonmaniac said:
I have the same problem for my Rhod100. Even installing the .cab file doesn't work. This problem is since this morning. I copied the file for many time and from different people but nothing is working.
Click to expand...
Click to collapse
Yeah I can confirm that your have a bad SD card. I had this kind of SD card before too and it was much more cheaper than original. All the files that you had copied to SD card will be corrupted, that's mean you cannot open it or play it. Then you also cannot make partitions on your SD card as well, am I right?
The only way to solve this problem is BUY A NEW SD CARD

Well i don't think that is the problem because it worked untill 21th of september. But maybe i will format the micro sd card (after i copied all of the files to my hard disk). Maybe that will work, I will try it.
Edit: I just tried to format the Micro SDHC card (It is an Micro SDHC) but it didn't made a difference, I still get the same error. I could gamble to buy a new micro sdhc card but what if that wouldn't make a difference too?

If you dare to try your luck for gambling, then why don't you try your luck to buy a new SD card?

minitool does not show all the partitons
i think jerrytan93 is right as whenever i try to make partition from mini tool then after making the partition the minitool does not show all the partitons, it shows only the fat 32 partition (with full memory).
but when i formatted the card again on my pc using windows then i was able to upload files on my sd card and also excess them with my mobile, that means my sd card is not bad.
but again i can't make partitions so what is the matter, i don't understand

I saw someone (forgot his name) in this forum said that there was some brand's SD card which are unable to make partition. So looks like you are the unlucky one

I've experience the same problem before.
Maybe the problem is ;
1. If you use Winmo Roms that have an OverClock setting like Dynamic rom, jus turn the OC setting off.
2. Maybe you have a bad SD card, try reformating it.

are u have overclocking on ur x1?

With GTX Dynamics ROM, i see Overclocking at Settings/System.
But 826x hasn't it. Where do i can find it?

Try other..
Energy ROM, at first try, it can run haret.exe <-- from Sensedroid..
Running perfectly..

vannanta said:
are u have overclocking on ur x1?
Click to expand...
Click to collapse
The Dynamic roms has the OC setting. U can turn it on or off.
I really don't know the Mhz after OC and before OC.

well, It might be the overclocking problem as others mentioned as I've had the same problem cuz Haret doesn't work with Overclocked roms ... also, I'm kind of new, so I'm not sure about the next tip but it worked for me ...
I went into the startup file next to the Haret and I changed the value from to 614 instead of the higher num cuz some of the Android roms are highly overclocked .... so, by lowering it, it might work ... it took me like 2 hours to find this solution but I'm not sure if it will work