This is really strange and weird.
I have played with the internet via 3G/WI-Fi and then disconnect.
The phone was doing nothing, and stand by in my pocket.
Then I heard miss call sound and saw a miss call from "Unknown" duration 00:00.
Hmm ...
Then I cannot call any number !
Everytime I try to call a number, I got this error:
Cannot complete the call. The signal may be unavailable or the phone number may not be valid. Verify the number or try again later.
There was nothing I can do, except soft-reset.
This happened twice within 30 minutes ... Got miss call from "Unknown" then phone call dead !
Anyone got this problem before? what cause this?
Thanks.
i have the same problem
ever since i have updated i cant seem to call anyone or recive calls i get the same error message"cannot complete the call the signal may be....."
does any one have a fix for this
@gogol - I'm not sure what would cause that. Are you using the official ROM?
@liam9646 - You said this happened after "updating"- do you mean flashing a new ROM? Custom or official?
@both of you- Have you tried a new radio?
gogol said:
This is really strange and weird.
I have played with the internet via 3G/WI-Fi and then disconnect.
The phone was doing nothing, and stand by in my pocket.
Then I heard miss call sound and saw a miss call from "Unknown" duration 00:00.
Hmm ...
Then I cannot call any number !
Everytime I try to call a number, I got this error:
Cannot complete the call. The signal may be unavailable or the phone number may not be valid. Verify the number or try again later.
There was nothing I can do, except soft-reset.
This happened twice within 30 minutes ... Got miss call from "Unknown" then phone call dead !
Anyone got this problem before? what cause this?
Thanks.
Click to expand...
Click to collapse
Have you solved the problem? If yes how?
Related
Hi All,
I've got a Diamond which is running Duttys V4 ROM with Radio v1.09.25.23.
Everytime i lock the phone (holding the hard {END} key), leave the phone for a length of time (say 1-2 hours - a shorter time will not produce this issue) and unlock the phone (bottom left {unlock} - middle right {confirm}) i am then unable to make outgoing calls. The phone still has signal and will recieve incoming calls / sms but upon trying to make an outgoing call or send a sms i recieve the message {your phone has no signal...yadda yadda yadda}.
Now, if i disable the Phone from comms manager and re-enable it, it will start to work and likewise, if i recieve an incoming call when the device is not working, it will work fine after the incoming call has ended. It just seems as if the phone isn't aware it's got a signal until it is made aware of this fact by an action, say incoming call.
Incoming SMS's although they come through, don't make the phone return to a working state.
Obviously there is a easy work around for this which is - Don't lock the bloody device - i can leave it for days with the screen off but no MS Lock enabled and it will still work fine.
Would be nice to get it sorted if anyone has got any ideas or seen anything like this. Could this be as simple as a regkey??? I suppose my other worry is that it my be indicative of a larger hardware problem...etc
Oh i've also tried upgrading the Radio to v1.11.25.01 which i'm now using with slightly increased battery life and higher than normal signal strength but no joy with it resolving this issue.
Tried a hard-reset, numerous soft-resets and all to no avail...
Sorry for a lengthy problem post and thanks in advance guys,
Tom
are u using s2u2?
vishalkishnani said:
are u using s2u2?
Click to expand...
Click to collapse
Nope, not using s2u2, although i have tried this to get around the problem and it doesn't seem to re-create the issue when S2U2 is used.
Just to re-iterate, it only happens when the device is locked with the inbuilt windows lock and left for a while (1hr ish)
Any clues anyone?? Does WM6.1 do anything strange with the radio when the device enters lock mode - ie. does is put the radio into "sleep mode" which only looks for incoming signals and then not come out of it properly?
Is anyone else having an issue like this at all??
Any help would be much appreciated!
Cheers guys
Whenever I receive a call when I'm already on a call, I never hear a beep or anything to indicate that a call is coming in. When I hang up, I see that I have a missed call. Once when I was looking at the screen, it showed an incoming call (call waiting), but no "beep" or anything...
Any ideas?
Did you ever fix this?
I'm having the same issue. Just wanted to know if you fixed it?
.
Never got it fixed...
same issue
Upgrading cyanogen constantly and finally downgraded for cyanogen3.4 to 3.3.8, cuz my phone was shutting itself off every 6 or so hours.. Now, it is running AMAZING... Just no BEEP for call waiting.. It isn't that big of an issue, but still would like it to work..
I think it is something that needs to be PUSHED into the phone and reseting the phone and taking battery out will not do it..
PLEASE HELP !!
Hate to dreg up a post from two months ago, but I'm having the same issue on my G1. I'm running soullife's Rogers 2.9.2, but have experienced this on other ROMs as well. Wiped, flashed, wiped again... nothing.
I've been scouring the forums to no avail. It's been reported a few times but I can't find a resolution.
Could it be something to do with stripped ringtones or notifications? I'll fiddle with them and see what I can find...
Any tips would be appreciated!
Ryan
Got a HD7 from Tmobile US unlocked to use it in India. Everything is perfect with the phone, however I just can't seem to figure out how to get it to show me the call summary after each call or message. It started showing up on the phone for a few days but stopped randomly! Any ideas??
anirudh412 said:
Got a HD7 from Tmobile US unlocked to use it in India. Everything is perfect with the phone, however I just can't seem to figure out how to get it to show me the call summary after each call or message. It started showing up on the phone for a few days but stopped randomly! Any ideas??
Click to expand...
Click to collapse
What do you mean summary? WP7 doesn't show you the duration of the call in the call log at the moment...
I mean the details that you get on screen immediately after diwconnecting the call. Minutes left, call charge etc.
Oh, I'm not sure about that, mine just says Call Ended and the Duration for about 5 seconds...
Can someone tells if this is not working in mango 7.10.7720.68 ,it is very important thing because many people have Free minutes of talking per month and they want to know how many they already used . It is not difficult to log this ... i had this thing in very old nokia 6100 so it will be shame if they did not included this in such of great phone software.
If it's not maybe someone can point to application that does it ???
Hey
My dad is using a Samsung Captivate which has been updated to the AT&T's gingerbread. The phone is rock stable and ran fantastically for almost 4 months, until yesterday. He has been complaining that about 7/10 incoming calls he was not "able" to answer. I tested it and found that when someone calls the phone, the incoming call screen that shows the caller's name/number/picture, accept and reject sliders, speaker options etc. does not show up and instead the phone just rings and there is no way to answer call. I restarted the phone and the problem went away, however I would like to know why this problem suddenly appeared, and are there any chances of it appearing in the future? My dad is definitely not a tech-know-how person and this captivate was a gift from me so I would really appreciate some insight on this problem.
PS: Also, could it be possible that another application with dialing capabilities could be causing this problem? We have Skype and Mobile VOIP installed, and have had it since the day he got it. Just as a precaution I cleared the defaults and made the phone+dialer the default for making calls. Been about 5 hours or so and the problem has not re-appeared, yet.
Watkins said:
I had nearly the same issue, except mine got to the point where the speaker phone didn't work either. Music played fine, phone calls stopped working. I went through a lengthy process of accidently deleting everything I had on my phone, which lead me to buy a USB Jig, install the stock ROM and it worked perfectly. I would suggest trying this before you try and physical fixes on your phone.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1427840
So, this started Im not sure how long ago, but it was sometime after Nougat got pushed out to the Note 5. More than 2/3rds of the calls I get, when I answer the call I hear nothing (no static, no beeps, absolute silence) and the caller is sent to voicemail as if I had rejected the call, even though my phone displays the active-call screen as one would expect it to while in a call. When calls work as normal, they work 100% normally with no errors or weirdness. Anyone have any idea what is going on? Im not rooted and Ive had the phone since a week before launch (thank you early shipment pre-orders) without issue. I have not tried a factory reset and dont intend to unless it ends up being my last resort, but I have tried multiple reboots.
Thank you for any assistance or guidance you may be able to provide :/