Related
Things were good for a while but now it all has gone to ****s.
My BA is having issues and not only with BT. I have managed to enable big store using exttools.exe and repart_doc.exe. The only issue is that I guess that has wiped the hidden rom where all the preinstall apps were.
To make a long story short, I had reinstalled the original rom, from a rom dump I did right when I got the device, however, the device, even after hard reset does not run the usual set up utilities that it did and install the junk my telco has included. While for the most part this was not a big deal now I realize that some of the fixes were needed.
For example I used to have BT xxx.3500 now I have xxx.3900 all find and dandy but with both versions my BT will not stay up for more than 2 minutes before it drops the connection.
On soft reset I get the following error message.
Cannot find "storage" ( or one of its components) Make sure the path and filename are correct and all the required libraries are available. Bugger
So now the question is - IS there a way of making these apps run and if so, how or is there another fix that can be done. MY BA is bleeding and it is dying and it is pissing me off.
After all the restores I can see the Extended_ROM on the PPC once again and all the apps in it, just can't run any of the darn things.
BTW, as my signature says this is BA from Telus and it is running on CDMA. which btw is missing from the WWE version on http://wiki.xda-developers.com/index.php?pagename=BA_Versions
Any insight would be appreciated.
If I understand everything correctly, you've effectively wiped the Extended ROM and are using it, along with your Storage as one big "persistent storage" folder on your BA, which is what those programs were designed to do. Everything you did, functioned as it was supposed to.
If this is not what you want, then you might try reflashing your device with the last ROM you got from your carrier and see if that restores everything.
I did just that, and I did flash the device with the "virgin" rom which I have uploaded to wiki. But somwhere along the line something just does not jive. While preforming a hard reset the device would normally auto config itself with all the junk that the telco has put on the device including a number of patches and what not. That function does not run anymore, which is what causing me grief. If I unhide the ROM I can see the files that are supposed to run, including the autoexec.exe all there. I try to unlock to copy these files and run them manually but I am not allowed to copy them anywhere. and while I try to use EXTTOOLS.exe to unlock the ROM thing just go south. It says that the ROM is unlocked but I am still not able to copy any of the files from the ROM.
szamot,
there is nothing availble yet for our phones to update them or make them any better...
I can't believe you tried messing with your harrier... just wait a while until sprint releases their update to the ppc6600. (fingers crossed) we should be able to do something then...
all of the roms you see here (so far as far as I know) are for gsm units, and their roms will NOT work with our cdma's. WAIT!!!!!
Hopefully you can get things back to normal.. otherwise your gonna have an expensive pile of nothingness to work with.
good luck.
as i side note wiki has 4 cdma roms.
Actually I uploaded the rom because it seemed to be the newest one at the time.2.04.00 WWE, I also upgraded the BT to xxx.3900 which all worked fine. However somwhere along the line the Ext Rom got screwed, even though I can see it I can't get at it. Not all is lost however I just procured the contents of the rom from a new device, and even though I run all the fixes and updates and patches the PPC still runs like crap. Even hard reset does not get the unit back to its original state.
Does anyone know if doing this will make the phone a brick? I am daring to do it, but hesitant because I cannot find a launch rom from Verizon to go back to.
Mike
I would not recommend doing this, there are some major differences in how they work there networks, and you will probably brickafy your phone. It's best not to try.
but what if you use the unbranding trick (hard reset after you flash, soft reset before carrier customization begins)?
anyone treied this? anyone WILLING to try this? i will supply the sprint rom if needed!
With all the ROM swapping we did on the 6700 it seems like it should be possible. As long as just the CE ROM is updated and not the Radio ROM you shouldnt run into any problems. The Extended ROM may need some select customizations (removals from the Verizon, additions from the Sprint) but that is cake once the CE ROM is updated. My guess is all that would be needed is an MaUt_NoID ROM updater for the 6700 like we had for the 6600. I don't have a 6700 as of yet so I can't help you but I'm upgrading from my 6600 soon and am definitely interested in getting this new ROM working for other carriers
I'm pretty new to the whole PDA world, so I am still gathering some basic info. I have a Sprint PPC 6700 I would like to convert to the Verizon network, and it is already a brick. When turned on it shows 'Serial' at the top of the screen until it is plugged into the USB, and then it says 'USB'. At the bottom it reads 'v1.00'. I assume this is the bootloader screen, but what I need to know is how do I get a rom to install. I would settle for getting this thing back to factory.
put it in the cradle with power and run the Rom Upgrade Utility
That won't work because in its current state, Active Sync does not see it. Windows sees it and recongizes it as a CE device, but that's it.
try using WinRAR to open up the installer and run the EXEs it contains one by one (I think the one you'll need is MaUpgradeUt.exe or something like that
I'll give that a try this evening. Thanks.
I tried that, and it tells me that the ROM image is corrupted, and I need to download the proper image for my device. I have tried both updates with this with no luck.
Ok guys, I have been neglecting p4350 too long now, so here is a brand new build, ported from latest release of kaiser, and this the wing guys dont have
It got 4mb pagepool
all usual apps I put in, ill make a list tomorrow...
but whats new in it is
new comm manager
romsettings
htc touch dual album
htc touch dual random access (new contacts manager)
htc touch dual keyboard (cool new way of fast typing)
htc home, customize it
newer touchsettings with custom weather setup (online)
htc networkplugin
onenote mobile 2007 (and ofcourse office 2007)
sms backup
Ill put up some screens tomorrow, its quite late here now, so im off to bed.
Ill try update this post alot better tomorrow..
But, to wing users:
Please dont report "bugs" here that you experience with your wing with this rom, because its not ment for your device.
The bugs you have might not be present in p4350.
Download:
Rapidshare
If someone could do me a favor and upload this to some mirrors, it would be great, cause not everyone can access rapid, and im to tired, im off to bed
cheers
I thought u forgot about Us, anyway I'll give it a try when i get home. can't wait.
awesome. can't wait to try it.
I have a few queries...
I flashed my dopod c800 with the touch it final , now activesync reads my phone as a HTC P4350. Can i flash it again with this new touch it?
Installed without a hitch.
How do I access htc touch dual random access (new contacts manager)?
It doesn't show up in Rom Settings.
How'd u use rapidshare?
Maybe u could use megaupload?
How do u use rapidshare?
I wanna flash but i cant get the file.....
Installed with no problem, apps and ppc running fast no overclock, camera work, office works, commgr works well, touch flo work, htc album is GREAT, window player works, my email works, i connected to my work outlook inbox. randon access dont work changing contacts in romsetting does nothing right now bout to install pocketcm, I don't see onenote present, the touch keyboard works sometime, keyboard symbol r messup i push a and get ?. if i come acroos any problems i'll post them but for now this work great.
before I got to work.
I must state again, incase someone with a wing accidently stumbles upon reading........
I do not understand why wing ppl keeps pushing that there is keyboard bugs in the p4350.
THERE IS NO KEYBOARD BUG
please, stop reporting it, the wing is built diffrent
IF YOU USE THIS ON WING YOU WILL GET A MESSED-UP KEYBOARD
have a nice day
cheers
Craps
How long does the flashing take? Mines been running for almost an hour..
Pulled the plug while flashing..
Then it bricked.... But, it was unbricked in the next 5 mins. Have to try flashing all over again.
follow instructions in the How To Upgrade.txt provided in the rom folder.
How to install your new OS for wing, follow this and you cant be wrong: (But im not sure since this is for Wing )
1. Make a full backup, or only the data necessary to you on SD a card or PC via Windows Mobile Device Center, or other
backup programs you might have.
1.b. Either hard reset your device, or flash the official RUU for your device, so that you have a clean base to flash on to.
2. Connect to ActiveSync\Windows Mobile Device Center, and run the connect without syncing the device.
3. Put your device in flightmode,this is done in CommManager. (radio off) If someone call, or sms you during flash, you will have errors.
4. Copy ASerg_Policies.CAB to your device and install it, THEN SOFT RESET, I say again SOFT RESET.
5. Start !UPGRADE_ROM.bat and wait, there will show nothing on your phone display, so dont worry, its normal. AND do not
use your device in any way, to be sure that no errors will happen, wait for the command promt tell you that you have
to hard reset. (If you dont know to soft and/or hard reset, dont bother to run the upgrade untill you have learned how to use your phone.
6. you should now have your new updatet rom.
-If you run into problems, and device is not booting, run the official RUU FROM HTC to restore your phone.
-If You have error during flash, this often happens for unknown reason. you can wait out and proceed, sometimes the update works anyway.
-If it doesnt work, reflash the RUU, and try again.
Beta not usable with dopod c800
Flashed twice and bricked it twice....
At last!!!
I have been connecting here everyday in order to find this post and finally here it is!
downloaded and ready to install.
hi, thank's for your work... already using on mine herald.
i just have a noob question! how the heck do i get the cube (if theres one )?
I must say i like this rom. Fast, and seems stable in the first 15 minutes
I installed it on my Terra this morning, worked like a charm.
I haven't found any bug so far, but it seems you forgot to include HTC audio manager.
thanks..
..for your great work.. tonight i install it!!!
edzilla said:
I installed it on my Terra this morning, worked like a charm.
I haven't found any bug so far, but it seems you forgot to include HTC audio manager.
Click to expand...
Click to collapse
lol yeah..ill add it in final
madds said:
hi, thank's for your work... already using on mine herald.
i just have a noob question! how the heck do i get the cube (if theres one )?
I must say i like this rom. Fast, and seems stable in the first 15 minutes
Click to expand...
Click to collapse
use tf-settings in programs/touchflo choose there how to activate, then soft reset
punkcell said:
follow instructions in the How To Upgrade.txt provided in the rom folder.
How to install your new OS for wing, follow this and you cant be wrong: (But im not sure since this is for Wing )
1. Make a full backup, or only the data necessary to you on SD a card or PC via Windows Mobile Device Center, or other
backup programs you might have.
1.b. Either hard reset your device, or flash the official RUU for your device, so that you have a clean base to flash on to.
2. Connect to ActiveSync\Windows Mobile Device Center, and run the connect without syncing the device.
3. Put your device in flightmode,this is done in CommManager. (radio off) If someone call, or sms you during flash, you will have errors.
4. Copy ASerg_Policies.CAB to your device and install it, THEN SOFT RESET, I say again SOFT RESET.
5. Start !UPGRADE_ROM.bat and wait, there will show nothing on your phone display, so dont worry, its normal. AND do not
use your device in any way, to be sure that no errors will happen, wait for the command promt tell you that you have
to hard reset. (If you dont know to soft and/or hard reset, dont bother to run the upgrade untill you have learned how to use your phone.
6. you should now have your new updatet rom.
-If you run into problems, and device is not booting, run the official RUU FROM HTC to restore your phone.
-If You have error during flash, this often happens for unknown reason. you can wait out and proceed, sometimes the update works anyway.
-If it doesnt work, reflash the RUU, and try again.
Click to expand...
Click to collapse
lol, that is the read me for wing, sorry about that
This rom is not built for wing, even though it might work, it might not work for wing
Ive been looking for the latest wing official rom but in vain. Will sum1 pliz pliz pliz just paste me the link here in dis thread plizzzzzz
http://toadlife.net/stuff/forum_stuff/XDA/ROMs/Wing/T-Mobile Wing Software_4.26.531.1.exe
hohohoho thanks dude appreciate it
Hey ive got a problem, u see i jus bought dis USED t-wing and it uses a custom rom when i got it, so i was trying to flash HTC_P4350_SVE_4_1.17.413.2_4.1.13.44_02.94.90_Ship but whenever i tried this rom it cant complete the procedure, well it was day before yesterday that i tried this rom HERALD.ASerg.Clean2.WM61E.WWE and it completed nicely, and i am currently using this rom now but i dnt like it, anyhow i wanted the latest official wing rom so i asked for the link and u gave me thanks again, but then when i tried to install it, it acts the same way as it does when im trying to install HTC_P4350_SVE_4_1.17.413.2_4.1.13.44_02.94.90_Ship, i followed the every intructions(i guess) which the t-mo support gave on their official website, here are the steps which they give:
To perform a device software upgrade, perform the following steps:
1. Ensure all desired media and documents are saved to the Micro SD memory card if one is available, or have been transferred to a computer. For information on how to back up files to a computer, go to How do I back up files to a personal computer?
2. Download the Update Utility from the T-Mobile Download Center.
3. From the File Download dialog box, click Save.
4. From the Save As dialog box, in the Save in drop-down menu, click to select Desktop.
5. In the File name text box, type T-Mobile Wing MSFP Upgrade, and then click Save.
6. From your computer desktop, double click the T-Mobile Wing MSFP Upgrade file.
7. From the RUU - InstallShield Wizard dialog box, click Next.
8. From the PDA ROM Update Utility 3.12.3.7 dialog box, click the check box to select I understand the caution indicated above and have reviewed the Readme, and then click Next.
9. From the PDA ROM Update Utility 3.12.3.7 dialog box, complete the four steps listed, and then click to select I completed the steps indicated above.
10. Click Next.
11. From PDA ROM Update Utility 3.12.3.7 dialog box, select Update. Click Next.
12. Click Next.
13. Once the update has finished, the phone will reboot automatically. To close the Update Utility, click Finish.
So i did all these exept for giving the name "T-Mobile Wing MSFP Upgrade" while downloading but i still changed it to "T-Mobile Wing MSFP Upgrade" after i finished downloading it. But i certainly dont think this is the reason or is it? Anyway, when i run the setup file eveything seemed normal, but after all the user interface steps are done my phone reboots and it entered the ipl n spl page, THEN the active sync was lost from my desktop pc, it not only lost it but the active sync is automatically end proccessed(exit) so desktop pc does not run any process of active sync nemore and the installation progress is stuck at 1%(one percent) and then my phone reboots and it logs to the current version of rom. I have no clue what to do wit it. Will someone pliz help me? By the way this is my 1st pda phone i realy need help. Thanks
hi could you reupload this file to somewhere??? i want to install that to my htc wing too thank you ...
You can find it at shipped-roms.com now....
http://shipped-roms.com/shipped/Wings/
Official T-Mobile Wing Update
Is this what you are looking for?
4shared.com/file/oCpQ0yci/T-Mobile_Wing_Software_4265311.html
All links posted are dead. Any other ideas?
metroidnemesis13 said:
All links posted are dead. Any other ideas?
Click to expand...
Click to collapse
try to go Here
K im trying to load the newest version of the hard-spl and when ever i get to the part where its supposed to load it to the phone, the little 4 color circle thing freezes and my phone freezes and i get error 260 and my comp says the phones not connected to it, which i know it was because i can do everything from the windows device manager, my service provider is telus, please help!
Yea the same thing happened to me when I first flashed mine, all you have to do is (1)make sure your using a CDMA ROM (2) If you are then go to this page (http://forum.ppcgeeks.com/showthread.php?t=36062)and download the DiamondUnlocker.rar (3)Unpack it with something like 7zip(FREE) (4) make sure your phone is connected with activesync or device center running (5) Start the application and flash your phone with that ROM (6) then flash the ROM you want to it.
that worked great! thanks now im enjoying a better phone
k seems like ever rom i try it runs good for a bit, then freezes, and when i restart the phone it freezes either at the loading screen where it tells you the versions or where it says the rom name, any help to resolve this issue?