Related
I know this has been beat to death in the Hermes forum but I have found a bit of difference with my Kaiser as compared to my Hermes.
I have quite a bit of experience with the TyTN hermes tweaks to get Microsoft Voice Command to work with the Hermes but not only will the Kaiser NOT work without the tweaks - I can't get it to work with the tweaks.
I followed the exact instructions like I always have listed in the Hermes Wiki section titled Utilities and Software Tweaks (including Bluetooth Voice Command installation and the Registry changes). However after the changes I cannot initiate a Bluetooth instruction via the Bluetooth device. If I initiate the call via the handheld it works great as far as stability and sound quality.
Any suggestions?
You don't have to do any tweaks on Kaiser! Just install VC 1.6. Assign Button 6 to Voice command. Soft reset. It should work. Works for me at least. The only think that doesn't work is a caller name announcement.
ID64 said:
You don't have to do any tweaks on Kaiser! Just install VC 1.6. Assign Button 6 to Voice command. Soft reset. It should work. Works for me at least. The only think that doesn't work is a caller name announcement.
Click to expand...
Click to collapse
Ditto,
My Kaiser does announce incoming callers on the internal speaker when the setting is on "use bluetooth if available". I only use bluetooth with my car so I do not know what the behavior with a headset would be.
Does it work so that you can push the button on your Bluetooth headset or Bluetooth car adapter and then give the Voice Command through the headset? Mine didn't work. That's why I did the tweaks.
Also can someone tell me that with just the Voice Command installed what does the following registry key have (or does it even exist)?:
HKLM\SOFTWARE\OEM\VoiceCommand\Path = ????
AND
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTAGExtModule = ???
Also if you go to settings and click on Voice Command - what version Voice Command do you have? I have v1.6.4622.0
Thanks
GenesysLV,
Can you please check build number of your VC 1.6?
Thanks.
ID64 said:
Can you please check build number of your VC 1.6?
Click to expand...
Click to collapse
Not terribly related, but v1.60.4622.0 is what my copy reports as well - though I'm still on a Hermes. I believe that's the retail release, I've not seen any indication of another one....
Richard
ID64 said:
GenesysLV,
Can you please check build number of your VC 1.6?
Thanks.
Click to expand...
Click to collapse
I have the same version number. Is there a different place to actually check the "build" ?
jcrompton said:
I have the same version number. Is there a different place to actually check the "build" ?
Click to expand...
Click to collapse
If you go to VC settings, please go to about or something like that. There you will see full version number.
Thanks
yep
its the 1.6.4622.0 version
jcrompton said:
yep
its the 1.6.4622.0 version
Click to expand...
Click to collapse
Thanks Just to confirm: you can hear callers name over your BT car handsfree?
ID64 said:
Thanks Just to confirm: you can hear callers name over your BT car handsfree?
Click to expand...
Click to collapse
Hmm... Looks like I have build 1.60.4630.0
Hi, I have build v1.60.4622.0 and I noticed a fundamental difference when installing to my kaiser than when installing to my Uni; no registry entries get added to:
HKLM\Software\OEM\VoiceCommand
So this means that no bluetooth interaction would work. Therefore I added:
Dword entry: LaunchAPEnable (value 0)
and
String entry: Path (value \Program Files\Voice Command\voicecmd.exe
Rebooted and now voice command is initiated fine via bluetooth headset. Haven't tested notifications yet - I think there might still be a missing reg entry but I can't remember what it is!
Hope this helps someone....
Thanks. I'll try those registry changes. I hard reset last night to make sure that I got rid of all of the "tweaks" that had been done - the way I did for the Hermes.
I wonder where the other guy got version 30 instead of our version 22
I got mine from Handango - the Microsoft site doesn't have any updates except for version 1.5
ID64 said:
GenesysLV,
Can you please check build number of your VC 1.6?
Thanks.
Click to expand...
Click to collapse
No problem. v1.6.4622.0
I should have caught up on the thread first. Just to be claer, I do not hear the callers name through my car. I do hear it only on the Kaiser's speaker.
I'd love to get the announcements working over BT. It was sporadic on my TyTN with the registry hacks.
captainsensible2002 said:
Hi, I have build v1.60.4622.0 and I noticed a fundamental difference when installing to my kaiser than when installing to my Uni; no registry entries get added to:
HKLM\Software\OEM\VoiceCommand
So this means that no bluetooth interaction would work. Therefore I added:
Dword entry: LaunchAPEnable (value 0)
and
String entry: Path (value \Program Files\Voice Command\voicecmd.exe
Rebooted and now voice command is initiated fine via bluetooth headset. Haven't tested notifications yet - I think there might still be a missing reg entry but I can't remember what it is!
Hope this helps someone....
Click to expand...
Click to collapse
THANKS!
This needs to go into the Kaiser WIKI !!!
These registry changes are needed inorder to be able to initiate phone calls from your bluetooth device using Microsoft Voice Command. These registry changes worked GREAT and the initiation of calls from bluetooth work much better than with the Hermes and it's tweaks.
Of note, using Resco Registry editor, I had to put quotes aroung the Path entry to get it to work so my registry edit looked like this:
Path Value= "\Program Files\Voice Command\voicecmd.exe"
If anyone knows how to get attention to have this put in the Wiki please feel free.
Odd, I did not have to edit/add any registry settings and I can initiate calls/commands from my BlueAnt Z9 headset.
________________________
HTC TyTN II (Kaiser) / WM6
greg3d said:
Odd, I did not have to edit/add any registry settings and I can initiate calls/commands from my BlueAnt Z9 headset.
________________________
HTC TyTN II (Kaiser) / WM6
Click to expand...
Click to collapse
? using Microsoft Voice Command ??
I used several different headsets / devices and no luck until I made the registry additions. What ver of Voice Command do you have?
Can someone turn this into a CAB?
Thanks
jcrompton said:
THANKS!
This needs to go into the Kaiser WIKI !!!
These registry changes are needed inorder to be able to initiate phone calls from your bluetooth device using Microsoft Voice Command. These registry changes worked GREAT and the initiation of calls from bluetooth work much better than with the Hermes and it's tweaks.
Of note, using Resco Registry editor, I had to put quotes aroung the Path entry to get it to work so my registry edit looked like this:
Path Value= "\Program Files\Voice Command\voicecmd.exe"
If anyone knows how to get attention to have this put in the Wiki please feel free.
Click to expand...
Click to collapse
jcrompton said:
If anyone knows how to get attention to have this put in the Wiki please feel free.
Click to expand...
Click to collapse
Ummm, the whole POINT of a Wiki is that users can add to it themselves, so feel free to update the Kaiser section.....
Richard
GenesysLV said:
Ditto,
My Kaiser does announce incoming callers on the internal speaker when the setting is on "use bluetooth if available". I only use bluetooth with my car so I do not know what the behavior with a headset would be.
Click to expand...
Click to collapse
I have tried this option but does not seem to announce calls.
Hope someone can find a fix.
Thanks
I tried searching and didnt get anywhere. Is there a was to disable (or change) the "woosh" sound at startup on the Tilt?
VTECaddict said:
I tried searching and didnt get anywhere. Is there a was to disable (or change) the "woosh" sound at startup on the Tilt?
Click to expand...
Click to collapse
StartupAnimation key in the registry
thanks, found the answer on another site.
Well what is the answer. Please share where you found the info. Thanks.
killian8 said:
Well what is the answer. Please share where you found the info. Thanks.
Click to expand...
Click to collapse
Use a reg editor search for what he wrote, and there should be a key for enabled, change it from 1 (on) to 0 (off). Simple
HKLM\Software\HTC\StartupAnimation
There you go.
Aaron
Is it possible to disable the startup vibration?
I dont want my Kaiser to vibrate while sitting in its cradle...
Anyone else? Open a message (any type) and it opens at the bottom of the message, so that I can't see the message or who it's from without scrolling up. It's annoying!
Also, if I use the D-pad to scroll through the messages, each message opens up in the same manner - at the bottom.
Is there a fix for this?
Thanks,
FrankyG
You posted the exact same question over on MoDaCo - and I answered it, so here's the exact same answer again
This is/was a common problem on the Hermes / TyTn I - but only if you'd installed a "tweak" utility like HTweakC or PimpMyBlack. There is a registry key (see below) that needs to be set to a value of 1 in order to prevent the auto-scroll-to-end in messages etc. The only downside to setting it to 1 is that you can't then scroll around pages in PIE using the D-Pad, you've got to use the stylus.
Code:
\HKLM\Software\Microsoft\Internet Explorer\Navigation\4-Way Nav = 1
If you've got the stock ROM on your TyTn II, then this may be the default setting; if you've flashed or installed tweaks, then this behaviour may be the result of that.......
HTH,
Mark.
Mark Crouch said:
You posted the exact same question over on MoDaCo - and I answered it, so here's the exact same answer again
This is/was a common problem on the Hermes / TyTn I - but only if you'd installed a "tweak" utility like HTweakC or PimpMyBlack. There is a registry key (see below) that needs to be set to a value of 1 in order to prevent the auto-scroll-to-end in messages etc. The only downside to setting it to 1 is that you can't then scroll around pages in PIE using the D-Pad, you've got to use the stylus.
Code:
\HKLM\Software\Microsoft\Internet Explorer\Navigation\4-Way Nav = 1
If you've got the stock ROM on your TyTn II, then this may be the default setting; if you've flashed or installed tweaks, then this behaviour may be the result of that.......
HTH,
Mark.
Click to expand...
Click to collapse
Thanks for the reply , twice
Can anyone with a stock TyTN confirm what the default registry setting is?
Thanks,
FrankyG
thx, working on htc tytn2! finaly i do not need to scroll down.
(it was coused by tweak2k.net on my device)
patr!k said:
thx, working on htc tytn2! finaly i do not need to scroll down.
(it was coused by tweak2k.net on my device)
Click to expand...
Click to collapse
What, specifically caused the problem? A specific tweak? cos I have tweak2k.net on mine also...
Frankyg said:
What, specifically caused the problem? A specific tweak? cos I have tweak2k.net on mine also...
Click to expand...
Click to collapse
As do I, and I still have the problem after checking my settings. Can someone give us an answer on how to fix this issue?
Frankyg said:
What, specifically caused the problem? A specific tweak? cos I have tweak2k.net on mine also...
Click to expand...
Click to collapse
hi,
i think it was just because there are some settings, when you can move mail attachments to the storage card. do not do that, i think this is main problem why msg are messed up after aplication this tweak.. anyway, i followed Mark Crouch's help and it works, so exported fixed registry and save for future usage
patr!k said:
hi,
i think it was just because there are some settings, when you can move mail attachments to the storage card. do not do that, i think this is main problem why msg are messed up after aplication this tweak.. anyway, i followed Mark Crouch's help and it works, so exported fixed registry and save for future usage
Click to expand...
Click to collapse
Huh? Could you explain a bit less cryptically?
Thanks a lot for the hint! I love this forum!
My bluetooth volume is really low on the headset, anyone else have this problem? Im using the Jawbone bluetooth headset on Dutty's v3 rom on my att tilt. Ive tried different roms, adjusting the volume to highest on the phone and the headset but callers are still hard to hear. Ive used the same bluetooth headset on my previous 8525 with no problems. My headset was even too loud when on high with the 8525. Any advice would be great because i do all my talking via bluetooth with my phone.
Yes, everyone has this problem - although I heard something about AT&T's latest ROM having some fix for the BT, but wasn't sure exactly what it fixed...
FIX?
Well if the problem was fixed either buy a chief here or htc or whomever, there should be a cab file floating around with the fix. thats what im hoping for or maybe a registry edit to help fix the problem. Ive read many threads on how the bluetooth volume suck for cars as well. Maybe if theres a fix for that, the same fix should fix my problem and many other's.
deeznuts said:
Well if the problem was fixed either buy a chief here or htc or whomever, there should be a cab file floating around with the fix. thats what im hoping for or maybe a registry edit to help fix the problem. Ive read many threads on how the bluetooth volume suck for cars as well. Maybe if theres a fix for that, the same fix should fix my problem and many other's.
Click to expand...
Click to collapse
Yeah as a matter of fact you can take this into your own hands. The latest AT&T ROM has a file called "AudioPara4-CWS_V6.csv" which I cooked into my new ROM (releasing tomorrow morning) as well. The thing is you don't need to "COOK" it at all. And it is simply a comma delimited spreadsheet. I have attached it so you can download it. Simply edit it as necessary for your headset, drop it in \Windows and add the following registry key to your device:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"AcousticFile"="\Windows\AudioPara4-CWS_V6.csv"
Drop and Go?
So i just drop the unzip file u provided into my documents and edit the registry myself as u described? Sounds easy enough if thats all it takes. Whats the name of the rom u are releasing? Ill have to give it a try.
?
DARN! When i downloaded the file on my tilt and tried to open it i get the usual zip error of cant find the archive file crap. Guess ill have to wait to get home from work to try it on my computer.
deeznuts said:
DARN! When i downloaded the file on my tilt and tried to open it i get the usual zip error of cant find the archive file crap. Guess ill have to wait to get home from work to try it on my computer.
Click to expand...
Click to collapse
If you're using File Explorer select "Show All Files"...sorry I zipped it directly from my ROM and it has the hidden and system attributes set. Even on a Windows machine you will need to enable hidden files AND Protected OS files to be able to see it. And put it in \Windows.
Nope
Even after i check show all files on file explorer, then click on the zip file, get the same zip error when i try to open it.
EDIT> See next post.
alltheway said:
Any chance of making this a .cab?
Im having trouble trying to follow your instructions. Every time I unzip it, I can't seem to find it. Am I missing something?
Click to expand...
Click to collapse
Exactly, glad im not the only one that cant unzip this file. sounds like we just need to place a couple files in my documents then edit the reg. This might sound dumb but can u just upload the files a la carte that need to go to the my documents folder instead of making it a zip file? A cab that installs by putting these files and edits the reg would be too good to be true. Anyone up for the challenge?
deeznuts said:
Exactly, glad im not the only one that cant unzip this file. sounds like we just need to place a couple files in my documents then edit the reg. This might sound dumb but can u just upload the files a la carte that need to go to the my documents folder instead of making it a zip file? A cab that installs by putting these files and edits the reg would be too good to be true. Anyone up for the challenge?
Click to expand...
Click to collapse
Make sure you have hidden system files unchecked in Windows?
If you using Vista go to tools in any folder. Click on folder options.
go the view tab.
uncheck "hide protected operating system files"
XP should work the same way as well. This solved it for me.
Adding Registry Key
Hey I was just wondering if I did this right...or am I totally off?
alltheway said:
Hey I was just wondering if I did this right...or am I totally off?
Click to expand...
Click to collapse
Yes, you are totally off as AcousticFile is a String, not key.
Try the Cab I attached.
Anyone found this key w/ the cvs file really help anything as I don't see any problem w/ the current BT so far???
jackleung said:
Yes, you are totally off as AcousticFile is a String, not key.
Try the Cab I attached.
Anyone found this key w/ the cvs file really help anything as I don't see any problem w/ the current BT so far???
Click to expand...
Click to collapse
Thanks for the .cab
I was wondering if you could provide me with a screen show of what it should look like so I will know for future reference.
Thanks,
EDIT: Am I getting closer?
Whats this cab do?
Thanks for the cab file but whats it supposed to do? I installed the cab to the device then soft reset the phone. I then talked via bluetooth headset for 20 minutes after reset and the low volume was still there. Almost seemed the cab did nothing more then take up 16kb of memory on the phone. Didn't address the low volume problem in the bluetooth headset. It must be something with the phone because i know this headset gets very loud becuase ive used it on several devices and all being consistant except the tilt. Any other suggetions to fix this problem anyone?
you can try this:
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\AudioGateway
Tell me what yours say for the "SpkVolume" setting ??
also...
I got this tip from somewhere before ... see if this help you ... it's for the BT handset mic volume ... but within those keys ... there should be one for the speaker volume as well ( you have to search for YOUR device ... as everyone's is different ):
quote:
""
Navigate to
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Device
Under this you would find several keys. Each key represents a device you are paired with. In my case I have only 2 keys since my PDA is paired only with 2 devices (my notebook, and my handsfree) Then navigate to the handsfree key, so mine reads like this.
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Device\000c55401c45\Services\0000111e-0000-1000-8000-00805f9b34fb
You would find a dword called name, verify that the value corresponds Hands Free
Change the channel to 5 (my default was 2) 5 seems to work better with Motorolla H500.""
goodluck
Bump for some more info.
If you search the forum you will find a few posts on this subject. I have been searching through them just about every day and I have had no luck in finding an answer. Seems editing the registry doesnt help and the BT fix cab was released by HTC to fix bluetooth headsets dropping calls. I have tried the fix and I have tried using Jetware, I have not tried the registry fixes because many others have tried and said it doesnt work. Ive been through 4 headsets and non have good volume. I am still waiting on someone to find a working solution or a reasonably priced headset (below $100 thats non-stereo) that works. I think you may be stuck for a while like so many others....
Man, that sucks. I never get dropped calls on from using bluetooth, only when the phone drops the calls from ****ty att service. Guess thats why the cab didnt help out with increased volume. i did tons of searching beforestarting this thread and like u found nothing so i decided to post and see what happens. Quentin stated above he fixed the problem in his latest rom released today, 1/14/08, so i guess ima have to try his rom out to see if it helps. i really dont want to leave dutty's 1.1 rom cus of opera 8.65 and his great features cooked in. i love how dutty has the battery status under htc home with the exact percentage of battery life. anyone have a cab for that feature dutty cooks into his roms? thanks!
deeznuts said:
Man, that sucks. I never get dropped calls on from using bluetooth, only when the phone drops the calls from ****ty att service. Guess thats why the cab didnt help out with increased volume. i did tons of searching beforestarting this thread and like u found nothing so i decided to post and see what happens. Quentin stated above he fixed the problem in his latest rom released today, 1/14/08, so i guess ima have to try his rom out to see if it helps. i really dont want to leave dutty's 1.1 rom cus of opera 8.65 and his great features cooked in. i love how dutty has the battery status under htc home with the exact percentage of battery life. anyone have a cab for that feature dutty cooks into his roms? thanks!
Click to expand...
Click to collapse
U don't have to limit what rom to use to have this so called BT volume fix (which I am not sure if it really working or not), just use the cab I package above.
For that battery status today plugin, you can find it here too: http://www.chi-tai.info/cs_BatteryStatus_XDA_Neo_WM5_iM_cs.htm
edit: I just noticed you are using Dutty's 1.1 rom. U can try my rom here which based on his 1.1 rom but w/ a few enhancement: http://forum.xda-developers.com/showthread.php?t=357490
Hi,
I have a Treo 750v (Vodafone version) which like what it's box said it is meant for email solution, that's why the left soft menu of the Today screen menu is set to Email.
Anyone know how to change this?
Thanks, appriciate your share of knowledge!
I forgot the details but this i know as much
You have to download the register editor program. Search around the registry is all the same when it comes to changing soft key for all WM phones.
The only problem with the Treo 750 is when you change the softkey from email to something else it ends up adding an extra short cut. So in essence you are not overwriting that key, all you are doing is adding an extra feature on top of the existing email button.
Maybe someone had better success than I did can chime in
Using a registry editor, navigate to Hkey_Current_User/Software/Microsoft/Today/Keys/112
Change all 3 values to reflect your new function
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
awesome!
mtiberio said:
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Click to expand...
Click to collapse
wow, thank you very much mtiberio!
your link really hit the spot!
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
tinyflier said:
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
Click to expand...
Click to collapse
It's all because Palm plugins - they overlay it. If you disable Active Call (or Dial Lookup?) you can have native-windows softkeys. It was all described in instructions how to ged back default dialpad.
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
was it:
"FdcSoft SoftkeyAppletEx.cab"
Gyngabread Man said:
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
Click to expand...
Click to collapse
it would be great if you share the file or where you get it, so we all can get it too...
mtiberio said:
was it:
"FdcSoft SoftkeyAppletEx.cab"
Click to expand...
Click to collapse
it is caled softkeyapplet but its not a cab it was a zip i just unzipped and put in my windows folder i believe... i will look in my external driveand post it im not sure where it is but i'll try to find it
ok i found it on my drive but i did some searching on the forums and alot of ppl mention it but dont upload it and im guessing its for good reason... dont wanna piss ppl off by posting something i shouldent if its ok though then i'll do it but i think its the same one your talking about for me it worked like a charm no reg editing
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Chillin said:
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Click to expand...
Click to collapse
Hi, thannks for the direct links. I'm going to try installing it. i hope it'll be fine.
seems it doesn't work with wm6. after installing it, the program isnt available in my program.