Database Develop

DEAD WHITE SCREEN / STUCK AT BOOT SCREEN = RESET SOLUTIONS

After installing Registry Wizard and tweaking stuff on my MDA Vario, my device rebooted and just stayed on the white screen displaying the operating system configuration screen. I couldn't do anything else with it - I thought it was dead! Having searched all over, I've written a piece about resetting your device here. The one that worked for me for this particular problem was method 3 (but I think method 2 works as well but I didnt have it at the time)
PS I found that it happens when you change the default input from keyboard to something else. Leave it at keyboard and everything should be Ok. Registry Wizard is nonetheless a COOL program, just don't alter the keyboard setting.
Hard Resetting MDA Vario
There are different severities of hard resetting your MDA vario. Which one you use depends on what you are trying to achieve. If your phone is stuck and wont let you play, try the hard core resets (progress from method 1 (less sever) to method 3 (most severe). If it’s just a bit slow, try the soft reset.
HARDCORE RESET 1
start>settings>system tab> Clear Storage
This will still clear all your data and all the programs you have loaded onto your device. You’ll need to start all over again.
HARDCORE RESET 2
I hold the Comm and Voice Button (top two buttons on the side) AND the camera button (bottom right). Keep them pressed in and hit the reset with your stylus. Keep pressed in and let go of the stylus. Release when you see the following message:
PRESS Send to restore factory default,
SEND is the green lift up phone button on the left
It will do a brief format and restore to factory settings.
HARDCORE RESET 3
If your MDA wont budge with HARDCORE RESET 1 or 2, try this:
Enter Bootloader, - hold the "camera" (bottom right) and briefly press the reset button, don't release "camera" until you can see colour screen, connect USB cable, and start to re-flash the ROM (download the latest flash rom update from http://t-mobile.iris-global.com/download_manager_mda_vario.html
SOFT RESET METHOD 1
This is the lightest of the reset methods. This is the one to use if you want to reset your device without having to re-install all your personal programs and data
 Simply press the reset hole with your stylus on the right hand side of the MDA device.

DEAD WHITE SCREEN
This was the most usefull help I have ever got ! Spent 3 hours in searching the forums, how to make my Wizard bootable after installing Resco Keyboard Pro. The only option was HARDCORE RESET 3 and reflashing the ROM.
Thanks for the great help !!!

cheers this has helped me too... rest number 2... will have to restore all my data though...

Reset 3 was the only thing that worked.

Re: DEAD WHITE SCREEN / STUCK AT BOOT SCREEN = RESET SOLUTI
mehayuk said:
After installing Registry Wizard and tweaking stuff on my MDA Vario, my device rebooted and just stayed on the white screen displaying the operating system configuration screen. I couldn't do anything else with it - I thought it was dead! Having searched all over, I've written a piece about resetting your device here. The one that worked for me for this particular problem was method 3 (but I think method 2 works as well but I didnt have it at the time)
PS I found that it happens when you change the default input from keyboard to something else. Leave it at keyboard and everything should be Ok. Registry Wizard is nonetheless a COOL program, just don't alter the keyboard setting.
Hard Resetting MDA Vario
There are different severities of hard resetting your MDA vario. Which one you use depends on what you are trying to achieve. If your phone is stuck and wont let you play, try the hard core resets (progress from method 1 (less sever) to method 3 (most severe). If it’s just a bit slow, try the soft reset.
HARDCORE RESET 1
start>settings>system tab> Clear Storage
This will still clear all your data and all the programs you have loaded onto your device. You’ll need to start all over again.
HARDCORE RESET 2
I hold the Comm and Voice Button (top two buttons on the side) AND the camera button (bottom right). Keep them pressed in and hit the reset with your stylus. Keep pressed in and let go of the stylus. Release when you see the following message:
PRESS Send to restore factory default,
SEND is the green lift up phone button on the left
It will do a brief format and restore to factory settings.
HARDCORE RESET 3
If your MDA wont budge with HARDCORE RESET 1 or 2, try this:
Enter Bootloader, - hold the "camera" (bottom right) and briefly press the reset button, don't release "camera" until you can see colour screen, connect USB cable, and start to re-flash the ROM (download the latest flash rom update from http://t-mobile.iris-global.com/download_manager_mda_vario.html
SOFT RESET METHOD 1
This is the lightest of the reset methods. This is the one to use if you want to reset your device without having to re-install all your personal programs and data
 Simply press the reset hole with your stylus on the right hand side of the MDA device.
Click to expand...
Click to collapse
Thank you for all this great information I am currently typing with one hand wondering how long I should hold the camera button? If you could fill me in on this information that would br greatly appreciated. I have tried almost everything and i can't get away from this darn white screen. My Qtek 9100 otherwise seems to function
ok.

no sync
my activesync doesnt work i tried option 3 and went into bootloader mode tried the rom but it doesnt detect my phone. any suggestions

Re: no sync
Mehayuk, thank you, thank you and thank you again.
My MDA rebooted and it stayed with the white screen. Couldn't do a hard reset.
I thought it was dead. :evil:
Finally I found this thread and your number three method revived my Vario.
So thank you again for this most usefull post I have encountered on the internet. :lol:

Dead HTC Qtek 9100
I did hard reset my MDA with 3rd mothod. I was able to flash up to 100%. When device restart, it just stuck on T-mobile screen. I tried to do hard reset by using 2nd method but it didn't work, format failed. Is it posible that my rom is dead? Please help.

Helpme Please My HTC Kais130 (AT&T Tilt) NO RUN , IS DEAD

Helpme Please My HTC Kais130 (AT&T Tilt) NO RUN , IS DEAD, only power on and ( smart mobility in display black) and no more
helpme please

Hello there, we all understand youre frustration. But for beeing able to assist you everyone need to know what exactly happend here? Where you flashing? Did it fell out of youre pocket? What where you doing last on it and so on. Take 5 minutts or more and provide as much info you can then edit youre post. That is AFTER you have searched and digged trought this board using google aswell for keywords on youre issue.

didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off

hanster said:
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
Click to expand...
Click to collapse
did u try hard reset?

No , i didnt do it, i dont kwon how to do it?

hanster said:
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
Click to expand...
Click to collapse
I know this is a abiouse question but I have to ask, mate.. You are not running flat on batteries? If you havent flashed youre device, and it wount boot and you got power on it you should check youre waranty on the device. Try to charge it for 10 minuts or so (check that you have charging light on) then try to start it again.
I understand you correctly that you havent HardSPL youre device at all or?

hanster said:
No , i didnt do it, i dont kwon how to do it?
Click to expand...
Click to collapse
u should do a hard reset.
Here is a step by step for u:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets
Remember after performing a hardreset, u will loose all your data on your phome(not on SDcard).

Kaiser_Resets
Back to Kaiser Wiki
--------------------------------------------------------------------------------
Soft Reset
Using a stylus, press the soft reset button at the bottom of the phone
Hard Reset **NB** This cannot be performed while the device is connected/charging!**
Press and hold both soft keys
Using a stylus, press and hold the soft reset button at the bottom of the phone
Keep all three buttons pressed until the keypad lights turn off and then flash
Release the soft reset button while still pressing the soft keys
Let go of the two soft keys once the message "This operation will delete all your personal data, to manufacturer default" appears on screen
Finally, press the green call button to perform the hard reset, or press other key to cancel
Bootloader
Press and hold the Camera button
Using a stylus, press and hold the soft reset button at the bottom of the phone
Release both buttons once the bootloader screen appears

did u do it?

this is my phone
this is my phone where is it the soft key
Press and hold both soft keys

I have currently disabled pics so I cant see the pics of your phone.DOnt u have kaiser?

The soft buttons are the ones next to gren and red phone buttons and above messaging and internet buttons.

im doiin that but dont do anything, dont show a message for reset phone what more can i do, can i repair with any software, any test mode , any flash

hanster said:
im doiin that but dont do anything, dont show a message for reset phone what more can i do, can i repair with any software, any test mode , any flash
Click to expand...
Click to collapse
just be sure u are doing the hardreset right. Some guys had problems, cause they had big fonger and they were pushing not just the soft buttons but also a buttons that are around them.
Hold these two soft buttons, then stick the stylus to the hole and hold it there antil a white screen appears where is the message shown. Then push the green phine button.

http://www.mediafire.com/?rc3vbcqdtbh
here you go a video

http://www.mediafire.com/?lrgmtzy4mat
here you go a video of problem the my HTC

hanster said:
http://www.mediafire.com/?lrgmtzy4mat
here you go a video of problem the my HTC
Click to expand...
Click to collapse
Ok, I have seen the videos. Did u try the reset with the kaiser closed?
I remember a thread with similar problem, will try o find it and post back.
PS: In the first video, u have three hands!!

OK, I found this one:
http://forum.xda-developers.com/showthread.php?t=374388&page=3
Similar problem, does your kaiser reboot continuosly or the screen just flashes.
Your best bet is to read the whole thread, try to learn something about mtty and contact gsleon.

HELP

I am new member, but I have my first problem with my HTC from T-mobile!
The phone starts after Hardreset, but stop at the green Windows Mobile 6 Logo.
Every time.
I have change my reg. and I think thats the Problem.
What can I do?
I can not reach the HTC with the USB or ActiveSync.
HELP
Sorry for my English

Are you sure you have "hard" reset?
A hard reset will undo any changes you have made to the device since the rom was flashed.
Try a proper hard reset:
hold the volume down and action button (centre of buttons) down whilst pushing the soft reset button (inside stylus holder).

Done!
merci

Xperia Hard reset gone

Hi all.
I'm a bit concerned. All of a sudden the ability of my phone to fix itself by hard reset (L+R buttons > Power on) is gone. This is quite bad.
I can still perform a hard reset via the control panel (erase all data).
Anyone know what's wrong? After the last hard reset the phone wasn't like how it was to begin with at all - or how it was after any of the other hard resets. All of the SE customisation had gone, and only the first 4 panels were available.
How come hard reset isn't a dead cert, and why in the world has the hardware shortcut gone?
Thanks

Mine refused to do a hard reset using the power button + silver buttons, it kept complaining that there was "no image file".
For some reason, using the soft reset button instead of the power button seemed to work on mine, after using the soft reset button behind the battery cover with the two silver buttons it did a proper hard reset and it worked with no problems.

i did 2 hard resets on mine now and i had weird behavior too.
On the first hard reset i couldnt hard reset by pressing the two silver buttons and the power button, just nothing happened. I then tried to press the silver buttons and inserted the stylus into the hole on the back which worked.
As i did a hard reset for the second time method 2 didnt work anymore, therefor method 1 suddenly worked...very weird

mine, couldnt hard reset it by preseing L & R and then soft reset...
i did it by clearing storage in setting!

It happen to me too...I solved it this way
Assign the default to each button left and right and then try it again..
PD: to hard reset trhee botton togheter and then relaese first the power button and wait until screen turn white....
Sorry for bad english

i need help!
mine did the reset ok, but when connected to sony ericsson's ipdate service keeps flashing 'no image file' and the update service says device not recognised. any ideas how i can fix it?

I have a slightly different problem. x1 to cleanse his memory, I was enabled very strange program that was the code'1234 'and when I did it my X1 phone simply shuts down. When I start up back, I appeared on a white screen with a blue stripe on top, and in the middle of the screen wee dagger. I've tried all the ways to retrieve the telephone to life but nothing is party, and the Internet also can not find anything. Please help.

@ thomsonss1: try a hard reset. That should work. Report back if it doesn't and we'll think of something else

Noooo it's not working.... I even can't to put a pin code or mobile code....
it suck......

I am also having the "No Image File!" issue. Has anyone fixed their phone or am I SOL?

htc diamond dead after flashing

please help i have flashing my htc diamond and after the screan was black , he not sycro, and i want to updte i have error 260, hard reset dont work, help

Try putting it into bootloader and flash another ROM.
Just press volume down + reset.

i have testing volum down and reset but he not work no syncro

dead is dead i tink the motherboard is hs , i don't say any other solution

any bady have a same problem , final solution jtag i tink

i'm in the same situation.... what do you did??

eny thing my htc is dead

So it won't even turn on? Can you see a black light?
Try removing the battery, put it in, hold down VOLUMEDOWN key (don't let go), and turn it on. Do you see a three-color screen?
What do you mean by "no syncro"? ActiveSync won't work with your device. But your computer maybe can still recognize it?
~codeslicer

same situation here, also after error code 260
doesn't react to anything, can't hard reset anymore...
suggestions?
or should i send it in for repair?
Kind regards
Pieter

I got from bro "cortez.i"
"(you get to bootloader mode by powering off the phone, then press-and-hold the down volume button and quickly tap your power button (do not press and hold the power button)"
good luck