Related
Hey guys, before anything please let me thank you for this amazing site. You have made a complete n00b to a power-user in 2 days flat. Please do allow me to tell you my story. 2 Days ago I got this thing called O2 XDA IIs (HTC Blueangel) and I got it for around 300US$ (Unlocked/New) was not so fond of Windows devices so intended to sell it off asap and get some other phone, was just doing a little R&D on the net to see what all is available for this thing. When I came across to your site, here's when I got so intregued by the capabilities of this thing.
First I intalled the latest ROM for my device, after getting little confidence I installed WM5 with my fingers crossed. Its all done now but have a few things to ask you guys.
1. When you mentioned about the EXTROM you said that you'll have to copy the files on the StorageCard\ExtRom when all I did was copy nk.nbf into the folder called WM5_Pack_V3 and ran the installer. I did run the batch file to get the oper_code from the DeviceData file. It was all done, I was really scared but now am worried did I do the right thing?
The Device Information TAB shows
ROM Version : 5.03.02WWE
ROM Date : 03/02/05
Radio Version : 1.12.00
Protocol Ver : 1337.42
ExtRom Ver : TuMa v1.3
2. It took me long enough to install this what all tweaks should I do to it so that it stays at the maximum bug-free current stage. (Hope you get me)
3. I need the starting screen to display something other then those scary 3 colored lines
Some things that I noticed after upgrading:
1. WM5 It's a little slow, but definately much better looking and show-off value.
2. I have a Wi-Fi enabled ADSL router at home by which I connect the O2 and other devices its working fine on.
Any help/suggestions/comments are welcome.
A brief intro for me would be have worked as a beta tester for many symbian application providers, was a complete S60 geek and am majorly into bikes & bike photography
Nothing said yet?
Im not sure I understand that whole Extrom deal, but what I can say is that the files that were in the extrom folder inside the upgrade pack must be put in the storage card in the same folder, but that is only if you want MMS and have a camera, if not, then there is nothing to do, unless you edit the Cfg.txt to load all your apps and settings after a hard reset. I guess that if you are able to use the device, you did everything ok as far as the flashing goes. it is a little slow, but its come a long way from the first versions, those were slow as hell, thanks to Mamaich and Tuatara and everyone else this version is running great!
as for the 3 color bar start up screen, there is nothing you can do about it...
Yeah I really forgot to thank Mamaich and Tuatara for their awesome work, now I am really scared as I dont like the slow response and am unable to downgrade. ActiveSync shuts down whenever I try to run the MaUpgradenoID.exe file activesync stops and it is giving errors in connecting, gets DC frequently. And moreover the Manufacturer supplied upgrade is also not working it gives a CountryCode error. Am really confused and scared now what to do?
Well I did not get any help but with loads of tinkering I got the thing done, I wanted to know why was WM5 so slow, otherwise the interface is loads better then the current CE I am using.
I have the Cingular version SX66 Blue Angel. I was able to update it without any problems. Usually speed is very different with those who flush the registry and with those who don't. Make sure you flush your registry after you completed the update.
Mine is faster and way more stable than the other version I had on it. Remember to follow all instructions exactly. if there is a link you need to check and make sure you do the format, change the ram size on the device, then upgrade.
There are no instructions on how to flush the registry can you enlighten me on this?
manav said:
There are no instructions on how to flush the registry can you enlighten me on this?
Click to expand...
Click to collapse
During the flashing process, the wiki instructs the user to do a hard reset
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_HardReset
You should answer NO, YES, YES to the boot questions.
Hmm yeah, I did do that. And just am in the process of downgrading from the buggy WM5. It doesn't work out for me.
and THAT'S where I got problems!
in the manual, it says I have to download my latest favorite ROM version, and FROM that file i should copy the nk.nbf the "DOWNGRADE TO WM2003SE" folder..and that's what seems impossible to me, since the Rom-update i downloaded is an .exe application, and not a .zip or .rar archive..
so how should i get the nk.nbf file out of the Rom-update .exe file..?
help
well some were in the same documentaion it should also say use rar or zip to unpack it (being the exe file).
Pls spend some time in wiki you might find some other answers
yeah i had tried that already back then butthat didn't work either..when i try that it still just starts running the program.. :?
Try these instructions with your exe file:
http://forum.xda-developers.com/viewtopic.php?p=233903#233903
hi
I tried to upgrade my pda2k to 2005, but I get hang
then when I tried again it show this message
http://www.600kb.com/uploads/20aac64ad6.jpg
can i get help please
sarab
Strategies for dealing with radio ROM update 114 errors
I had this problem last week and recovered from it. At first it looked pretty bad, nothing seemed to work. I looked the Internet up and down and in most forums, including this one, people agreed that nothing could be done about error 114, the mainboard of the BA needed replacement, etc.
When I finally did fully recover from this situation, it was from a combination of measures that I took and as I don't really know which one actually did the trick, I'll try to describe all of them even though not all will probably apply to others. Another problem is that I probably won't be able to remember them all, but anyway, here goes:
1) I downloaded the latest full official ROM update from site of the carrier this phone was branded for, in this case T-Mobile. It included a radio ROM, albeit version 1.13.0, not 1.15.0 which is the one I had been trying to flash. I decided it would be best to go back to that official version first.
2) I had been trying to do the radio ROM upgrade from a Macintosh (OSX) under Virtual PC. I have since done several ROM installations (without the radio part) from the Mac/VPC which worked fine, but since people had observed that radio ROM updates seem to be more sensitive than fiddling with the normal ROM, I decided to fire up my "real" PC, which runs WIndows XP, SP2, with Active Sync 4.5.
3) As others had suggested, I made sure that I had my cradle connected directly to a USB port on the computer; before I had been trying to go trough a hub. I also made sure the cradle was connected to the power adapter.
4) I had unlocked my device before to work with a non-T-mobile SIM card, but since I wasn't sure wether or not SIM/Net lock problems might still interfere with radio upgrades, I took my SIM card out of the unit, as well as the SD card -- trying to eliminate as many potential sources of screw-up as possible.
5) I think I tried to set my BA into as much of a defined state as I could by hard-resetting it and THEN invoking boot loader mode. I don't remember whether or not this was possible as the device was not reacting much to anything at the time.
6) On the Windows PC, I opened Active Sync, then went to Connection Settings and explicitly disabled the USB connection. I then quit Active Sync and invoked the Windows task manager (Ctrl-Alt-Del) to check that no other processes were running. Trying to cut out interference as much as poosible ...
7) I then proceeded to flash the official ROM version, which went flawlessly including the Radio ROM, took less than fifteen minutes in all. To be honest, I don't remember which ROM upgrade utility (BaUpgradeUt/MaUpgradeUt_noID) I used ... sorry. I know I tried whatever was included with the T-Mobile download first.
After that, I verified that everything was working again, then immediately flashed Radio ROM 1.15.0 as I had originally intended. This time it went uneventfully.
Hope some of this helps, I know how frustrated you must be at this point.
Good luck!
thanks a lot
i'm going to follow your instruction today.
regards to all
[email protected] said:
thanks a lot i'm going to follow your instruction today.
Click to expand...
Click to collapse
So did you have any luck?
Available at least in www.myqtek.se and www.myqtek.fi.
Changes: Updated client for streaming media. New radio version.
Although I cannot get upgrade to start properly, always gives me error 262 at 0%.
Thanks for the update! I've downloaded and will flash the new software in the morning (I want to charge the battery a bit first).
I hope radio is more stable with this software - I've been to Denmark and the UK this week and in both countries call were broken and the phone lost connection with the mobile network (No service and Searching). Same problem that I've had before, even though I have tried changing the sim card. If it wasn't for these problems it would be a great smartphone, but now I find it to be a very crappy phone. Let's see if that changes now!
what's the AKU of the new ROM?
Finally got the update to work, had to do it according to these instructions: http://forum.xda-developers.com/showpost.php?p=1050547&postcount=6.
OS version is now: 5.1.465 (Build 15673.3.3.1), BUT radio is 1.29.00.10 and not 1.38.00.10 as it says on the ROM package. Can someone confirm this? As I had the 1.32 IU Test version installed previously and although I went first back to 1.30 I didn't check what the Radio version was so I don't know if 1.29 radio is something that was left from the 1.32 version or if 1.34 just has the same radio as 1.32.
1.32 was pretty promising version and I hope this one will be even better. I've had no major issues with these newer versions, although just a few days ago the phone ate the battery from 100% to about 15% in two hours when I was in a movie theater and the phone was not supposed to be doing anything!
I too have problems upgrading - I get error 262 at the beginning of the flashing. When I restart the MTeoR it starts WM as usual, so it seems it hasn't started flashing yet. This happens on two different computers. Any suggestions, please?
Note: I am able to flash 1.30.251.1 with any of the above computers. Only the new 1.34 is a problem. Could the install program be faulty? If so, it is pretty bad considering it is an official release.
New Rom
Hi,
Can you put it on rapidshare of megaupload ???
cor
http://rapidshare.com/files/22706498/852727-mteor_upgrade_2.zip.html
New Rom
Thanks for putting it on rapidshare.
I found the problem about the 262 error.
Just use a older update program with the new
rom file and everything is OK.
What language include new rom?
I didn't know how to do that , but after having checked a number of threads etc this is what I did:
1. Extracted the files in the exe file RUU_BREE100_1.34.251.1_1.38.00.10_HTCEUR_SHIP using WinRAR.
2. Did the same with RUU_BREE100_1.30.251.1_1.16.00.10_HTCEUR_Ship
3. Removed the nbh file from the 1.30 directory and replaced it with the file from the 1.34 directory.
4. Ran ROMUpgradeUt.exe
It all worked, and I have now upgraded the Rom. Thanks!
jpalo: radio is 1.38.00.10, just as the file name says.
My radio didn't update first time either.
I found I had to use the 1.30 installer and it would only update the second attempt when it was already in the bootloader.
I then used the 1.34 updater and it then updated the radio.
Well I just updated mine and Yippeeee!!!!! Finally I have the EDGE "E" at the top. 'Bout freakin' time. My radio does still say 1.29 but I have noticed that before the update my phone was only on 2 bars, now it's steady on 4. Browsing seems to be much quicker now as well. Time to start reloading and testing.
Try updating with the 1.34 .exe and .nbh once you have managed to get to 1.34 the first time (ie just run the updater direct as you should normally)
My OS is 5.1.465 (Build 15673.3.3.1)
Radio Version is 1.38.00.10
So I guess that would make it AKU 3.3.1
No problems with it so far and have unlocked it to import the Vodafone settings as I would before, now to restart my mission to actually be able to load the UK Vodafone wap sites.
Dl also, and will try it out.
Electronic Punk said:
Try updating with the 1.34 .exe and .nbh once you have managed to get to 1.34 the first time (ie just run the updater direct as you should normally)
My OS is 5.1.465 (Build 15673.3.3.1)
Radio Version is 1.38.00.10
So I guess that would make it AKU 3.3.1
No problems with it so far and have unlocked it to import the Vodafone settings as I would before, now to restart my mission to actually be able to load the UK Vodafone wap sites.
Click to expand...
Click to collapse
Do you mean you "application" unlocked it? When I tried the old tired and true way of running SDA Unlock tool it tells me it can't be unlocked. I also can't make any registry edits, it won't save my changes and gives an error. What did you use to unlock it? Thx.
I ran the registry editor (same as before), made three registry changes.
Rebooted, ran the unlocker (which is now allowed)
Rebooted again and ran the unlock tool and said my phone was unlocked.
The steps I followed are here:
http://www.modaco.com/Mteor-application-unlock-solution-t244205.html
staffann said:
...I've been to Denmark and the UK this week and in both countries call were broken and the phone lost connection with the mobile network (No service and Searching). Same problem that I've had before, even though I have tried changing the sim card. ...
Click to expand...
Click to collapse
I had the same problems with my phone really bad. Finally got fed up and sent it for repair.
Got it back about 10 days ago, and haven't had any problem since. I'll wait another week or so before I really give it a clean bill of health.
The fix was quite simple... They replaced the mainboard... So it seems like there really was a hardware problem.
Royan
Royan said:
I had the same problems with my phone really bad. Finally got fed up and sent it for repair.
Got it back about 10 days ago, and haven't had any problem since. I'll wait another week or so before I really give it a clean bill of health.
The fix was quite simple... They replaced the mainboard... So it seems like there really was a hardware problem.
Royan
Click to expand...
Click to collapse
Sent in one last week, same problem, it cuts calls and cant find network and so on.
Royan and BarateaU: please keep me posted!
I'll try to let you know as well if the ROM upgrade solved my problems.
Looks like the 1.34 update has been removed from www.myqtek.fi and www.myqtek.se (although it is still available via some URL tweaking).
Running the ROM update again now succeeded without any 262 errors and radio was also updated to 1.38. Thanks for help.
http://palmone.r3h.net/downloads.palm.com/Treo750_2_23_ROW_EN_DesktopUpdater.zip
The official unbranded releases. Release is this week according the dutch Palm Site. http://www.palmclub.nl/nieuws/28671...m-upgrade-beschikbaar-/-available-nieuws.html
this doesnt work om my treo 750...it says after you try and update that the update is not for my device, yet i am already running wm6???
also i had to extract the zip file with winrar as windows says its not valid...
frozenwaffles said:
this doesnt work om my treo 750...it says after you try and update that the update is not for my device, yet i am already running wm6???
also i had to extract the zip file with winrar as windows says its not valid...
Click to expand...
Click to collapse
Strange. Are you trying to update you're 750 or 750V? Because this is the unbranded update voor the Treo 750.
See also this site: http://www.pocketinfo.nl/nieuws/nie...om-update-beschikbaar-voor-palm-treo-750.html
i have a telstra 750 which has been updated to wm6 and had the ext rom deleted and then rebooted/cleared...so as far as i am aware, its a plan 750.
any ideas???
Won't work on my unlocked Cingular 750 either.
frozenwaffles said:
i have a telstra 750 which has been updated to wm6 and had the ext rom deleted and then rebooted/cleared...so as far as i am aware, its a plan 750.
any ideas???
Click to expand...
Click to collapse
Have you read this: http://forum.xda-developers.com/showthread.php?t=340226 ?
You problably have to first downgrade you're treo to wm5 before upgrading to the official wm6. I haven't test this rom upgrade because i already have upgraded it with the official wm6 vodafone upgrade for my treo 750V.
marco899 said:
Have you read this: http://forum.xda-developers.com/showthread.php?t=340226 ?
You problably have to first downgrade you're treo to wm5 before upgrading to the official wm6. I haven't test this rom upgrade because i already have upgraded it with the official wm6 vodafone upgrade for my treo 750V.
Click to expand...
Click to collapse
I just downgraded mine. I'm going to wait until I get to work and retry the ROW on a real laptop instead of my VM here at home.
Didn't work.
I just tried it with my AT&T Treo 750 (WM5 14959.2.3.2) and I got the "Unsupported Device Update".
mdonato said:
I just tried it with my AT&T Treo 750 (WM5 14959.2.3.2) and I got the "Unsupported Device Update".
Click to expand...
Click to collapse
Verry, verry strange. It's the official upgrade comfirmed by one of the mod's by pocketinfo and ROW stands for Rest of World.
Treo 750 WM6 upgrade
Thanks for the links. I tried the Italian upgrade and worked well.
Only problem seems to be Voice Command. Apparently it is not part of this ROM upgrade. Any idea why? Any possibility to install it afterward? Is not supported at all by the ROW upgrade?
Any advise is greatly appreciated
Robert
Problem to upgrade
I enter my serial number but the firewall of my bank rejected the download.
Unfortunately servers from palm registered my device and re-download seem to be impossible...
Does the direct link avoid this problem?
if not how to upgrade mine (my version is : TREO750-1.16-RWF)
Does the upgrade work on Vista ???
regards
It definetly works on Vista! Infact when I tried to upgrade my 750 1.15VFE on XP it gave me a script error and wouldn't run at all. I tried it on my laptop that was running Vista and bango it start the upgrade process.
I tried the latest ROW English update and got "Unsupported Device Update" also.
I followed the instructions here "HOW TO UPGRADE TO WM6"
http://wiki.xda-developers.com/index.php?pagename=HTC_Cheetah_WM6
Phone is running WM6 with no issues. My device still says i am running V 1.16-VFE as others have already mentioned,
jmerritt said:
I tried the latest ROW English update and got "Unsupported Device Update" also.
I followed the instructions here "HOW TO UPGRADE TO WM6"
http://wiki.xda-developers.com/index.php?pagename=HTC_Cheetah_WM6
Phone is running WM6 with no issues. My device still says i am running V 1.16-VFE as others have already mentioned,
Click to expand...
Click to collapse
The 1.16 change to 2.23 only takes place at the end of the upgrade cycle. After the first reboot, the upgrader explicitly states to press continue *only after* having recalibrated and setup activesync (guest mode is enough). That's when the last part of the upgrade kicks in.
It may be that in Vista this last part of the upgrade does nto take place.
i wonder if those of us using the cheeimg method end missing some features that do not get installed?!?!?
cingulartreo said:
i wonder if those of us using the cheeimg method end missing some features that do not get installed?!?!?
Click to expand...
Click to collapse
Palm support has explained the at&t delay by saying 7 ways upside and down, that when the upgrade is applied that it absolutely cannot be rolled back. Since those doing the cheeimg method have been successful at doing that and a radio upgrade for hermes radio i think i heard or something cannot be rolled back, maybe thats what they mean. If you do the full install it does one of these updates that locks it. But I'm just guesing
I am using the Palm Treo750 Cingular and got "Unsupported Device Update" message when I tried to upgrade the latest ROW English.
How can I do to upgrade? Thanks
contho said:
I am using the Palm Treo750 Cingular and got "Unsupported Device Update" message when I tried to upgrade the latest ROW English.
How can I do to upgrade? Thanks
Click to expand...
Click to collapse
I'm assuming you'd have to do the bootloader method described here. Otherwise you have to wait for the at&t rom to be released.
calico said:
To upgrade you can use the SD-card method described in this forum.
Or try this one:
- start the updater, stop at the first screen
- look at your temp directory, there is a new folder created
- edit the file "payloads.xml", in the section "carrier codes" replace the 3 letters with the letters you see on your treos system info
- go on with the updater (start update)
good luck
calico
Click to expand...
Click to collapse
This method also works, maybe you also have to change the version range listed.
good luck
ok that last tip worked a treat! i love this forum!
thanks to all who support it and give information!
did the instructions above andf all good, although i also change the version range low to '115' just incase...
After long last, I've finally updated the WM6.1 Clean Developer Edition and have fixed up almost all the problems you guys had with the original.
Changes from original 1.0 version:
Portrait Camera now working
MMS 4.0 is included with basic MMS settings
Custom splash screen!
Some other bugs I can't remember...
User Customization 2.0 - You'll really like this if you have a microSD card!
Installation:
Installation is now completely automated. If you are currently running the official T-Mobile ROM, please run the CID Unlocker.exe that is included.
Once you are CID Unlocked, run the Windows Mobile 6.1.exe program.
Done!
If at any time you want to go back to the T-Mobile ROM because of an error flashing or whatever, you will need to turn your phone on in bootloader mode. To do this, hold down the camera button and then press and release the power button while still holding the camera button down. Your phone should go to a screen with red,green, and blue bars. Plug it in to your computer now and run the T-Mobile Update from their site.
Download link: http://www.sendspace.com/file/vxxsq3
Rapidshare mirror: http://rapidshare.com/files/133831473/Clean_Developer_Edition_Revision_1.1.rar.html
Note: The T-Mobile Edition BETA 2 will be released sometime later today or tomorrow for those who have been waiting for an update since the last.
works great so far! thanks again for the updates
Beautiful, I love for your work .
did you add rickwyatt fix for the interface
edit
after trying to download this 10 times already im kinda pist
upload it somwhare else it stops like half way
huh?
okay i must first apologize for my ignorance, as i am very new to this. first what is "CID unlocked"? Also, are there still bugs being worked out of this rom? i previously had a dash ( HTC Excalibur ) and used a 6.1 rom from an xda member and really liked it. T-mobile has not issued a release date for wm 6.1 and frankly i am sick of waiting! will this rom work the same as the previous rom i used for my dash? thank you ahead of time for any answers and help you may be able to provide me with.
Everything works perfect! The only thing I have not tried is mms but I don't mms often.
Thank you for all your hard work!
Noted BUGS
#####
#BUGS
#####
1.) To upgrade from Dev 1.0 to 1.1, I for some reason had to cid unlock. For some reason, every time I tried to flash the Juno, I kept getting an invalid certificate message.
2.) Microsoft's Getting Started App is missing.
3.) After LiveSearch is installed, when a user tries to exit the application they would encounter a missing resource error. (Note: This never occured in the 1.0 version. I'm currently googeling for a solution).
-----
That's all I could find. Otherwise, great ROM. I've noticed it works a bit faster then the 1.0 Rom, what changes did you make?
I also upgraded for dev1.0 to 1.1 and did not have to cid unlock the exe worked great
live search I have no problems with and get no error win exiting
getting started is missing and looked in the windows folder I did not see it there so I think he removed it but who needs it I did have a died shortcut in the all programs for it but after adding more programs to it it is gone
the battery on the settings slide still needs to be edited in the reg to open
still have to try User Customization
but all and all works great
hopefuly need4speed can make a cab to fix these bugs brcouse im kinda sick of flashing my phone
im also waiting for a mirror
ahhh victory
I had some bugs that didnt bother me so much on 1.0, so I am excited for an update.
And I will never get sick of flashing my phone MU HA HA HAhahaha!
When I have it up and running I will post notes of usage ND4, Thank you so much for this.
kron2 said:
I also upgraded for dev1.0 to 1.1 and did not have to cid unlock the exe worked great
live search I have no problems with and get no error win exiting
getting started is missing and looked in the windows folder I did not see it there so I think he removed it but who needs it I did have a died shortcut in the all programs for it but after adding more programs to it it is gone
the battery on the settings slide still needs to be edited in the reg to open
still have to try User Customization
but all and all works great
Click to expand...
Click to collapse
Okay, I'll reflash my phone, and see if i have any problems.
Problem with install
Hi All
I have tried several times to follow the steps to upgrade to this Windows Mobile 6.1 using ND4SPD's file from both download sites. After running the unlock procedure, when I start the Windows Mobile 6.1.exe installation proceeds to just after the status bar comes up on the phone, Then, I get an error that the image file is corrupted. The phone reboots back to Windows Mobile 6 Standard.
What could the problem be?
Tim
What exactly does user customization 2.0 do?
timtillman said:
Hi All
I have tried several times to follow the steps to upgrade to this Windows Mobile 6.1 using ND4SPD's file from both download sites. After running the unlock procedure, when I start the Windows Mobile 6.1.exe installation proceeds to just after the status bar comes up on the phone, Then, I get an error that the image file is corrupted. The phone reboots back to Windows Mobile 6 Standard.
What could the problem be?
Tim
Click to expand...
Click to collapse
Dose your phone turn white after running CIDunlocker.exe? Also u have to remove storage card and restart phone before anything.
This rom works in gene p3401?
kormanb1123 said:
Dose your phone turn white after running CIDunlocker.exe? Also u have to remove storage card and restart phone before anything.
Click to expand...
Click to collapse
I just tried without the memory card.
Yes it turns white. The unlock util reports success.
I reboot the phone, start the update util, the screen gets red green and blue bars.
At 2%, the update util shuts down with:
"ERROR [270]: Update Error"
"The image file is corrupted. Please check your update utility."
The phone then reboots.
So, what do you think ?
Tim
@tech_hardman: this will NOT run on the gene. It is specifically meant for the htc juno. If you try it, it might brick your phone.
@guitarkid6920: UC 2.0 basically allows you to have all of your settings, programs, etc installed automatically after the rom is installed so you don't have to work on it every time you flash a new rom.
@timtillman: Make sure that after your phone gets the app unlock that your phone restarts. Physically disconnect from your computer and wait for it to restart after the app unlock. It should work.
ND4SPD said:
After long last, I've finally updated the WM6.1 Clean Developer Edition and have fixed up almost all the problems you guys had with the original.
Changes from original 1.0 version:
Portrait Camera now working
MMS 4.0 is included with basic MMS settings
Custom splash screen!
Some other bugs I can't remember...
User Customization 2.0 - You'll really like this if you have a microSD card!
Installation:
Installation is now completely automated. If you are currently running the official T-Mobile ROM, please run the CID Unlocker.exe that is included.
Once you are CID Unlocked, run the Windows Mobile 6.1.exe program.
Done!
Download link: http://www.sendspace.com/file/vxxsq3
Rapidshare mirror: http://rapidshare.com/files/133831473/Clean_Developer_Edition_Revision_1.1.rar.html
Note: The T-Mobile Edition BETA 2 will be released sometime later today or tomorrow for those who have been waiting for an update since the last.
Click to expand...
Click to collapse
Sounds great! By the way I'm newbie here and can you help me to do this step by step coz i'm little scared to try. I'm with the original 6.0 rom and if ever error happens can you pls add also the procedure to bring it back to original rom, tnx.
Sure thing. I'll update the post right now.