I got my my MDA Vario III last week. So far I was not able to get TouchFlo working. It does just nothing after tipping/touching.
Any suggestions to me?
try "flicking" the screen in an upward motion starting from the top of the taskbar up the screen or from the top taskbar to the bottom. touchflow take a bit of a fast movement to get it working
Also, install the Kaiser Tweak (do a quick search and you'll easily find it) and then adjust the touchflo sensitivity.
Thanks..indeeed I had to press very hard..at the end I learned I had to edit the registry!
http://www.pocketpctweaks.com/pocketpc_tweaks/Minimize_tapping_Pressure
Related
I don't mean to sound dumb, but I have the touch-it rom on my wing and im trying to figure out whats so different from my orinal tmobile rom as far as this touch flo thing goes... in my setings i keep seeing something about a cube and all but i dont see a cube... I go to programs and tap touchflo but nothing special or magical happens... I just need help... is this just a name or should my phone have things flowing on screen or what?
read the forum post for the touch-it series. it says you have to go into the settings under programs and select how to start the touchflo cube. after first installing it won't work until you do this.
^^^ I did but i still never see anything...
i went on you tube and i see what it is supposed to do do but my phone still isnt doing it...
After enabling the cube and setting 'View mode' to 'TF default v4.1', press whatever button activates TouchFlo and sweep your thumb from the bottom of the screen to the middle/side. The cube should appear. If not, press the TouchFlo button again and sweep from side to side and see if that works. Don't use your finger tip either. It may not recognize it. When the cube finally appears, sweeping from side to side will roll it. Use the sweep from the bottom of the screen to the middle/side to close the cube.
OK guys i got it working... this is pretty neat
Thanks for all the help^^^^
TouchFlo is one of those "ooo look at this" although it isn't very useful! haha.
i don't use the cube either, on the other hand i won't be able to go w/o the finger scrolling anymore...very useful
Oh yeah, True that. I love the finger scroll on the contact list.
When I have both the Touch Cube and S2U2 installed, whenever I try to unlock my phone, the Cube starts instead of unlocking. When I close the cube, it goes back to S2U2, and so on... I had to soft reset my phone and uninstall the cube before I could use my phone again. Anyone else have this problem? Is there a solution?
go to the ftouchflo settings..and add the program to the exclusions..that way it doesnt activate when you try and unlock it
I have both installed. I use touchflo all the time and I've never accidentally activate the cube. In order to activate the cube you have to swipe completely accross the screen from side to side, top to bottom or bottom to top. partial swipe such as S2U2 will not activate the cube. I use pointui, opera mini4, S2U2, PIE, contacts, and pocketCM. All of those programs requires swiping the screen but not completely accross the screen. The trick is to touch the screen before you swipe. The best way to activate from the cube any program is flicking motion starting at the outside of the screen, on the bezel then on to the screen.
Or just do what volcomnator999 said and add it to the exceptions. If the cube ever comes up when you don't want it to, just add it to the exceptions, and it's no problem. No need to change your touching habits.
I have done all things you suggest but cube enable with s2u2...Can't stop it functioning with s2u2.....Any other solutions?
maybe you have older versions of those software try upgrading?
Cube e s2u2 last version....but it is possible that is touchFlo fault...The only old version program
solved!!
The configuration tool doesn't change the .txt file of touchFlo configuration. Edit the .txt and it's all ok!
Hi, I've been having the same problem with s2u2. When I go to unlock it sometimes goes to touchFLO
I've tried editing the config file, but it doesn't seem to work?
here's my config file in case it helps.
; FTouchFlo configuration file
Delay:100
GestureWaitingDelay:10000
;To disable scrolling use DisableScroll:1
; to enable scrolling use DisableScroll:0
DisableScroll:0
UpDownApp:/Program Files/TFloCube/TFloCubeCtrl.exe
UpDownAppCmdLine: close minimizeApp
DownUpApp:/Program Files/TFloCube/TFloCubeCtrl.exe
DownUpAppCmdLine: open
LeftRightApp:/Program Files/TFloCube/TFloCubeCtrl.exe
LeftRightAppCmdLine: spinRight openSpinRight
RightLeftApp:/Program Files/TFloCube/TFloCubeCtrl.exe
RightLeftAppCmdLine: spinLeft openSpinLeft
; Exclude applications
ExcludeocketCM.exe
Exclude:TomTom Navigator
Exclude:Flash lite
Exclude:iContact.exe
Exclude:jmm.exe
Excludeicsel Browser
Excludeoutlook.exe
Exclude:HTCAlbum.exe
Excude:S2U2.exe
; end of configuration
I'm not too sure why it is doing it still...
Any help is appreciated. Thanks!
Doe's any body know where I can download full version of TouchFlo and TouchCube for my Kaiser!!!
Google.com is your friend.
There are lots of versions of the cube out there so there isn't an easy answer.
I have been messing around with the cube tonight and i think the nicest "free" version that you can get going yourself is:
http://forum.xda-developers.com/showthread.php?t=336234
This is slither's flash based cube. You will need to install FtouchFLO and Flash Lite to get it working. If you read through that thread you should get enough info to get you going.
If you don't want to do the legwork you have a few options:
1) Download a ROM with a Cube cooked in
2) Download UltimateLauncher, a nice desktop shell that emulates a cube type effect (as well as other animation options)
3) Try and then buy either Touch Commander or Spb Mobile Shell. Both have "Cube-like" menus that you can use.
Thanks man!!!Serbia thanks you
HTC TouchFlo and Cube vs. scroll bar
I'm running one of the cooked ROMs with the cube and touchflo... I noticed that I have to add most programs as an exception in the touchflo configuration otherwise the cube will launch or the program will minimize if I move the scroll bar too quickly. Is there a way to adjust touchflo to only recognize slides that are done in the center of the screen? Otherwise I have to add every program with a scroll bar to the exception list because touchflo messes up the scrolling.
Does the stock HTC Touch have this problem?
Wayno-san said:
I'm running one of the cooked ROMs with the cube and touchflo... I noticed that I have to add most programs as an exception in the touchflo configuration otherwise the cube will launch or the program will minimize if I move the scroll bar too quickly. Is there a way to adjust touchflo to only recognize slides that are done in the center of the screen? Otherwise I have to add every program with a scroll bar to the exception list because touchflo messes up the scrolling.
Does the stock HTC Touch have this problem?
Click to expand...
Click to collapse
I used to adjust the Timeout using Schaps TouchFlo Config tool, the lower you make this number the quicker you have to swipe to lauch the Cube.
So long as I scrolled at a sensible speed the cube would not launch.
But that's in the past, Cubes are pretty, but I never use them, other than to show off.
Thanks
Dave.
I wish I could just have the picture dialing instead of the hole cube. I guess a one sided cube. Doesnt really make sense does it.
One place to check
HTC Home comes with most ROMS now standard with a few exections but I cant exactly remember where found my Touchflow version but i included it below also check out this site because they have a great htc home screen customizer http://www.pocketemu.com/download.html I hope this helps.
Love my Diamond - though prob not nearly as tweaked as most of you have em
One thing I just don't like is the "iphone" type scrolling - flicking the screen up/down continually drives me mad.
My previous phone MDA Compact III - with pointui Home UI had a great directional scrolling facility which scrolled the screen fluidly in the drection the stylus or finger pushed - Pushing up/down on the right hand side of the screen srolled the a-z index (similar to Touchflo 3d contacts screen) and pushing up/down anywhere else on the screen scrolled the screen in the same direction - speed varied on pressure of push used.
video might give a better idea of what I mean ...... http://www.youtube.com/watch?v=Na7k2JfbgG8
Anyone know if this is available for the diamond or maybe someone far more savvy than me can develop it
Why don't you just install PointUI again if you liked using it on your last phone?
I like tf3d .... would just prefer the pointui style scrolling
I'm HTC Touch diamond holder and i have one problem. When i swipe left across the screen to move to the next tab, and swipe right across the screen to move to the previous tab the movement is not 3D.The program that i was install was only Skype and IGO8.I see the problem after installation.I have make hard reset of the device but the problem exist.Is there some hidden settings or something to do to come back the 3D effect(like rotation) when i browse trough tabs.Now the tabs(HOME to example and PEOPLE)just appear off and on without this 3D effect.Please Help me.
Could you post a screenshot? I don't understand exactly what you mean. Someone else does probably..
Look at the presentation of touchflo in official site.
http://www.htc.com/www/product/touchdiamond/touchflo-3d.html
When you change the item from menu (e.g. Home screen to People screen), the change is 3D (home screen disappear with movement to the left and appear people screen from right....like circulating motion).I do not know how to explain how 3D menu works, but this is shown on the link that i post.In my case Home screen just disapear ....not to left.
Sory for my english.
The slide show for separate items in touchflo menu is 3D(not for me). I put one wallpaper and that was my mistake.But after hard reset the problem remains. My ROM version is 1.93.4****
"It's becouse of the TF3D version.
Try this one, it will be a little slower but you will have the 3d thing "
I have the old TF3D version, but the opload won't work...
But thats what you need!!
Tank you very much. I thing the problem was from me with the software or wallpaper i use it.
It might be your ROM version as well.....
because in the 1.93 ROM, they removed the lag between the tabs and so the 3D effect.....the solution listed above should help you and take away your problem, but than it's a little bit laggy....
if you can live with that..allright
good luck