I've spend a lot of time to fix my problem but no success
I upgrade my treo 750 with french rom and it is ok but still 1.16 instead 2.23
What is very ennoying me is that the treo do not recognize any minisd (microsd in a adaptatoneither a 1giga or 2giga)
Please help me
tks in advance
You might have a faulty device or a bad memory card. Try to format the memory card on your PC to FAT16 or FAT32 and see if that helps.
tks a lot
but formatting do not work
so back to the shop
Related
Hi there,
this is not really a XDA topic, but since I think here is the most knowlegde empowered crowd around I may as well ask: (I just cooked a 2003 rom in Jeffs kitchen and just have to say it rocks!!!! :!: )
Here's the problem:
I have two SanDisk 256 MB SD cards. One is without any problems (sofar), but onto the other I can only copy about 100 MB Data (no matter if I do it taking pictures, or copying from WinXP or through the SD Slot of the XDA).
So I tried formatting the card in the following ways:
- By the camera (Pentax Optio 550)
- By the XDA (Storagetools.exe, the OS by simply inserting the card)
- By PhotoResco (which could actually read the card and report the :? problem but has no formatting option - at least not in the demo version)
- By CompuApps OnBelay SD recovery tool :x
- By WinXP :evil:
They all stop or report a problem at 37% formatting.
I know this is a known problem of SanDisk cards over 256 MB size, but
since it's known I can't believe there is no solution!!! :?:
Doesn't anyone have some kind of a low level formatting tool for SD cards or at least a ZeroWrite kind of thing...
Help would be greatly appreciated!!
Thanx in advance and keep up your incredible work!
Hello
I bought few days ago a 8gb micro sd card for my p3600.
I'm using an micro to mini adapter from kingston.
If I put the card in the device it says to me that there is only a 4gb card avalible.
Yes I used the search function but I didn't find anything that helps me.
I don't want to update to wm6
I hope smeone can help me
Thank you
olum
olum said:
Hello
I bought few days ago a 8gb micro sd card for my p3600.
I'm using an micro to mini adapter from kingston.
If I put the card in the device it says to me that there is only a 4gb card avalible.
Yes I used the search function but I didn't find anything that helps me.
I don't want to update to wm6
I hope smeone can help me
Thank you
olum
Click to expand...
Click to collapse
Who's the maker of the card?
olum said:
Hello
I bought few days ago a 8gb micro sd card for my p3600.
I'm using an micro to mini adapter from kingston.
If I put the card in the device it says to me that there is only a 4gb card avalible.
Yes I used the search function but I didn't find anything that helps me.
I don't want to update to wm6
I hope smeone can help me
Thank you
olum
Click to expand...
Click to collapse
Sorry but as far as I know you will have to update to WM6 to get this to work correctly!
8GB SDHC
Does 8GB Micro SDHC cards work on this phone? Is this SanDisk cards? Are there any requirements to the micro to mini SD adapter?
Does anyone know if trinity with wm5 supports 6/8 gb sdhc cards?? I have read the last coment about it's necesary to upgrade to wm6 to use these cards, but i don't know if there are any fix to support them on wm5.
I know there are a fix called sdhc.cab (or something like that), but i'm not sure if with that fix wm5&Trinity will works fine with any sdhc cards.
(by the way, i don't want to upgrade by trinitry because it's really working fine under this wm5 (including gps) and also i know that i will lose my guaranty if i upgrade it).
Any help would be appreciate. Thanks
I am also experiencing the same problem... I already tried upgrading my P3600 to WM6 (by the way working very well) and the HDSD drivers available through this site with no success. Is there any other solution to this problem?...
Hi Guys,
I have Trinity with Shaps 6.30 (THX alot for this great ROM!!)
without any patch and hokus-pocus, and my 8GB Sandisk SDHC
worked out of the box...
Showing something about 7.7 GB (rest is used by sytem/formatting)
But ins dev. and Hack, is a tool posted 4 all non Shaps (l)user's
and plz use the search function...here what i get in 10sec:
http://forum.xda-developers.com/showthread.php?t=344338 ---> "SDHC card patch WM5 and WM6" working<----
hope helped u
mastah
mastah said:
I have Trinity with Shaps 6.30 (THX alot for this great ROM!!)
without any patch and hokus-pocus, and my 8GB Sandisk SDHC
worked out of the box...
Click to expand...
Click to collapse
Hi Mastah,
Is there a thread for this ROM? I can't find it anywhere....
Mattster
I've managed to see all the 8gb of a Kingston microSD (+ adapter, of course) in my WM5 (original rom) Trinity.
See:
http://forum.xda-developers.com/showthread.php?p=4415582#post4415582
iam using 2gb kingsten sd card on my himalaya for abt 2 months ,suddenly yesterday my ppc says to read storagecard u have to format it to become readable ,i formated it and it works fine but after few hours its not shown on memory,but when i inserted my old 256mb card its shown ok.sorry for my english anybody plz help whats wrong
Its the card
Dude,
Its the memory card......
I had the same problem. Sometimes the card shows, sometimes it doesnt.......
One day, it just didt want to display at all......
It was also a Kingston 2GB (One of those adapted ones from MiniSD)
I bought a new one, works fine!
(Oh yes, the kingston cards apparenlty have a 5 year warrantee, if you have the slip!)
its becasue your card is corrupted..try to format it in your pc and hope it will work.else......
My Storage Card (2GB A-Data) started to act funny when I set the camera to store photos on Storage Card. It was if files were disapearing from it and even it seemed as if there is no Storage Card inserted at all. Once I set the camera to use main storage again and soft reset it all became allright again.
thanks for ur reply ,any software to format it on ppc
thanks for ur reply ,any software to format it on ppc.if its not shown on ppc how can i format it..or how can i format it using pc i have no hardware except data cable which connects himalaya to pc
install WM5torage on your ppc which will make you use your ppc as a cardreader..or you can try Resco explorer or i think Total commander
please ather can u
please ather can u tell me in detail how can i format storage card through wm5torage by pc ifts not shown on ppc,thanx
first install WM5torage on your PPC..then run the application and Activate it,,after that connect ur ppc via usb and a new driver will be found in your pc...after a little while a new drive will appear i.e your MMC..right click and format
ok i got it
ok i got it but wt format to i use to format my memorycard its shown on pc 1.86gb fat ot fat32
it says
it says ur memory card not appear to be in reading format and then format it but wt format it says fat32 and fat
ather it says
ather it say canot format disk is write protected even its not whats wrong
did u uncheck the read only option in WM5torage
it works u r really a master ather
it works u r really a master ather , i formated it by fat32(is it right or what format??) and it says 1910.75mb free and also shown on my ppc now thank u soo so much
ather just in case what was wrong in the memory card to do this and could it happen again?
again thank u so much.now i feel free thanks everyone takecare byee
PROBLEM SOLVED!!!!!
U are welcome my friend...the problem could have been caused by a virus or any software..maybe u ejected the card when it was in middle of something..this might have corrupted its sector..any way im glad i could help
can somebody help me i'm searching about 2 months but i don't find enything....
my problem is:my tilt don't recognise anymore my usb cable neither my micro sd card...I want to upgrade to 6.1 to solve the sd problem.i think is a driver problem because after i install wm5torage on sd card after soft reset no any sdcard anymore...
ps.i think i tried everything...hard reset etc...
please help!!!
It is in the wiki
The first thing you should have done was check the wiki. It gives step by step instructions on how to flash via the sd card. Just a suggestion.
yes i know but my til don't recognise any microsd card anymore...
nstnkt said:
yes i know but my til don't recognise any microsd card anymore...
Click to expand...
Click to collapse
well if your tilt isn't recogonizing your sd card than i would suggest trying a different microsd card and see if that is readable by the microsd slot. If not than that might be a hardware failure and is covered by 1 year warranty from date of original purchase.
If you think it is because of wm5 storage than try a hard reset and see if that solves the issue .. although i doubt it will but doesn't hurt to try.
i already try a hard reset but noting change...
and i bought my tilt on ebay...i dont think is covered by warranty
but i don't give up!!!
nstnkt said:
i already try a hard reset but noting change...
and i bought my tilt on ebay...i dont think is covered by warranty
but i don't give up!!!
Click to expand...
Click to collapse
try a different card and see if it recogonizes that one
Reformat micro sd card with your PC
Make sure your card is formatted correctly. I'm not sure, but I believe it should be FAT32.
i already tried 6 diferent micro sd cards...all formatted in fat32
nothing changes...
i forgot one thing.when i power on my tilt it says if i want to format my sd card but there isn't any card inserted!!!!
hello! i have 2020i and i have a problem with it.
I'm buy this phone 3 days ago, so i have with him RS-MMC card and it work good with it. So, i have mini-sd with adapter for sd card and it's don't work on pda =/ I don't see him in tcm/file manager. I test other sd in the shop and it doesn't work to.
Is 2020i support sd card or i need buy rs-mmc?
What is problem with sd? mb need some update or drivers for device? Or some special sd card? Thanks for help
P.S. Sorry for my bad english, i'm from UA.
P.P.S. If u know russian - please better answer in this lang.
Yes, 2020i support SD. Are you sure that you have SD instead of SDHC?
I tested a lot of cards, but still found working The problem is that not all cards are suitable, that's all. By the way - i buy kingston and it work well.
Close topic please. Problem solved.