hello
i tried to update my trinity with WM6 which i found in forum.
i think i´ve done all steps until this 4 colors on my device.
Trin100
IPL-SSPL by Des
Trin100
SPL-1.07.ds
usb
is shown. no light is on. but then on my pc is shown "error:connetion"
"please check the cable/cradle" and everything stops.
on my pc ist vista and the trinity is a vodafone "branded"
after a softreset everything is like before. nothing is lost.
has anyone an idea?
thx TheSmiler
Keep on trying, maybe you'll brick it I managed once. Very satisfying feeling.
Related
i went to the website
www.asia.htc.com/asia/event/WM6/index.html
and followed the on-screen instruction
what happened now is that there's an update error
i followed the step by step to recover but the thing just stuck there
now whenever i on my dopod d810,
my screen just shows the 3 color screen
and that's that
i dont know what to do!!!
help!
and this is crap
i cant seem to establish a connection AT ALL with the activesync
and whenever i want to update, it just says ERROR [286]
i did ALL the steps it suggested
- disconnect USB cable from phone
- remove the battery
- wait 3 seconds and reinstall
- when you switch on, you see 3 screens
- connect USB cable again
- resume install
and then after i resume install,
SAME PROBLEM again! ERROR [286]
its like a vicious cycle!
Just for your info
i am currently using activesync 4.5
and right now whenever i connect my usb to my phone,
the activesync doesnt seem to be able to detect the phone at all
here is the video of my several attempt to upgrade
just download it here
http://www.sendspace.com/file/ha26ws
Is there anywhere where i can download
WM6 for
- Hong Kong (ENG)?
what happened is that right now
i actually used the Aussie one and that doesnt work i think
(assuming that is the problem)
I tried the SEA one and it also doesnt seem to work
I heard that you need to use specific update
the problem is
i dont know where my dopod originate from???
is there any way to tell?
what does the tri-colour screen say?
you can check out trinityguides upgrade problem faq and see if those steps help you.. all isn't lost yet, you should be able to revive your device
let me know how it goes
the TRI screen color says
TRIN100
IPL-1.00
TRIN100
SPL-9.99.CP
ive seen the faq
doesnt help me at all
I think i might need to flash back to WM5 first
problem is,
where can i download the WM5?
Stalvros said:
I think i might need to flash back to WM5 first
problem is,
where can i download the WM5?
Click to expand...
Click to collapse
here http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
yeah, flashing back to wm5 is a safe bet at this point...
have you tried splxploit?
thanks~
i actually fixed this problem yesterday
i found that link that you gave
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
through this
http://xman892.blogspot.com/
the strange thing is that~
the WM6 that that guy use doesnt seem to have any transcriber
while the official WM6 latest version has
It's not strange at all. The rom that you downloaded is a cooked rom. I think the cook removed any excessive stuff and so you may not find everything you want there.
Stalvros said:
the TRI screen color says
TRIN100
IPL-1.00
TRIN100
SPL-9.99.CP
ive seen the faq
doesnt help me at all
Click to expand...
Click to collapse
try this, it solve my problem just like yours!!!
http://vimafeje.com/splxploit-windows.zip
I've spent whole day reading through the froum and the trinityguides.info site but can't find any proposed solution to work for my situation.
Device info:
ROM version: 3.00.707.17 (WM6)
ROM Date: 6/29/07
Radio version: 1.46.00.11
I've tried using all 3 versions of hard-spl but they all end up with the same result. With active sync linked and ready, ran the "romupdateutility.exe" at the end the PDA prompts if I want to run the "enterbootloader.exe", the moment I press yes the active sync connection would drop and eventually the program timed out with error "260" while PDA stuck in the tri color screen displaying the following:
TRIN100
SPL-1.07.ds
I've found some similar problems in the forum but those users are using vista however I am running XP sp3 in this case. I've tried all other solutions in the FAQ areas but none of them works.
My unit came with the WM6 already but I just want to upgrade the radio and get some cooked ROM to get faster performance. What am I missing here?
Any help is appreciated.
Once it drops to the tri-colour screen and is in bootloader, run the RUU again. Should be all that you need.
I've tried running it over and over but on the bottom it just kept on saying "serial" when it suppose to say USB.
Anyways, problem solved and it turned out to be the cable. For some reason the cable is good for anything, except keeping the phone connected/recognized while in bootloader mode.
I think this should be listed as one of the FAQ in the trinityguide. This might be a rare problem but it surely took me a lot time to figure out.
on Vista
Hi,
I have similar problem but I'm using Vista (Business). Is there any workaround ?
Regards,
Daneal
Hi
I have the same problem
spl 1.20 Olipro display serial instead of usb
I tryed several usb cables and still the same
when trying to update the rom it refuse to connect the ppc and end displayng the 260 error no connection
My system is vista and the first time I upgrade everything was fine, I followed all tutorials and no problem at all.
Do you think that could be this new 6.1 Mobile device center I recent install the cause?
best regards
Inabox
The problem isn't the WMC as such more the fact its Vista. Find an XP PC and do it from there.
Hi there, I had the same problem just now and cured it(in Vista). Just upgrade the htc driver in device manager again with "wceusbsh.inf" previous file, then should be ok. It seem to be Vista replaced the driver during it switched to Tri color menu.....
Last week i recived a call, I've pushed the green button and the telephon crashed. I restart the phone, but during the boot it write "no gsm" and it stop on windows mask. I've unbrick the SPL, I've installed the SLP 1.30 Olipro, I've try to install the radio rom 1.46.00 but it don't star, I've installed 3 different windows ver. 6.0 but when i switch on the telephon it write "no gsm" and stop on windows mask. I'm despered....... could any one help me?
Regards
Farinik
HTC P3600
TRIN100
IPL-0.50
TRIN100 MFG
SPL-1.30. Olipro
farinik said:
Last week i recived a call, I've pushed the green button and the telephon crashed. I restart the phone, but during the boot it write "no gsm" and it stop on windows mask. I've unbrick the SPL, I've installed the SLP 1.30 Olipro, I've try to install the radio rom 1.46.00 but it don't star, I've installed 3 different windows ver. 6.0 but when i switch on the telephon it write "no gsm" and stop on windows mask. I'm despered....... could any one help me?
Regards
Farinik
HTC P3600
TRIN100
IPL-0.50
TRIN100 MFG
SPL-1.30. Olipro
Click to expand...
Click to collapse
Try flashing an Official HTC WM5.0 or 6.0.
this help??
http://forum.xda-developers.com/showthread.php?t=399891
Ok so I was upgrading my radio on my P3600 to 1.41.00.11 to enable GPS and when it started upgrading, the status bar started on the PDA (as per trinityguides.info's instrucions) but it didn't on my computer. My computer then switched itself off, was dead for about 3 seconds, then restarted itself. I pulled the USB cable from the PDA and now it is stuck in a bootloader style screen, but sais,
TRIN100
IPL-0.50
TRIN100 MFG
SPL-1.30.Olipro
A soft reset does nothing, neither a 'Battery pull-out'
I think that I am stuck in Hard SPL (according to Trinity Guides). Can anyone help me get the PDA back to normal so I can re-flash with the new Radio please? Thanks Alot.
P.s If it is of any relevance, My PDA was not synced with Activesync, But before the flash, I downloaded Activesync 4.5 to fix the 'Generic RNID device' problem on XP. It was identified on my pc as 'Mobile device' in my computer, as far as I can remember.
Sorry if this thread is not new to the site but as a noob (lol) im not really 'broken in' to the site yet. Thanks again for your help.
Hi everyone,
After further research, I reckon I should do the following:
1. In hard SPL, Connect it to another XP computer (my laptop)
2. Untick box called 'Enable USB connections' or whatever in Activesync 4.5
3. Open the ROM of my choice and Double click 'upgrade' or whatever
ROM][WWE][30.10.2008]Karmba_a Diamond Blue For Trinity
4. Wait for the ROM to install
5. Let the trinity soft-reset
6. Done!
7. Upgrade to radio '1.41.00.11' off trinityguides
8. Wait for the radio to install
9. Done!
Please tell me if im wrong so I know if there are any other steps to take. Thanks alot.
Ok guys, I guess, with time I solved my own problem. I did in the end connect my PDA to my XP laptop and used 'splxploit' (thanks to whoever made/programmed this!) which unbricked my device. Now when I tried to upgrade my radio again to a different version, because I have Olipro 1.30 installed instead of 1.20, I was unsuccessful. This shall be what I do next so I guess this thread is not needed anymore.
I'd appreciate it if one of the mod's would close this thread to try and save precious server memory, or can I do it myself (soz im new(ish) to the site!)?
Cheers Guys.
Hello,
so my T-Mobile MDA III (german) = HTC Blue Angel ist not working any more. I tried to apply the latest update form T-Mobile but it failed.
Now I am stuck in the bootloader. It says: "Serial" above and "v2. 08" below. When I insert it into the cradle "Serial" changes to "USB".
I cannot hard or softreset the phone. It stays in the bootloader. When I connect the MDA III to Windows 2000 or Windows XP it is not recognized anymore by the device manager. In windows 2000 no driver is being installed and under windows XP (with SP3) "unknown device" is being installed. No chance to manually change to any other driver. Also tried new windows installation.
Tried with Active Sync 3.7 (original from t-mobile), 4.2 and 4.5.
Flash via SD Card is not possible, if I understood the posts correct. Further mtty does not detect anything at the usb port. BaUpgradeUt.exe and MaUpgradeUt_noID.exe fail.
Any help greatly appreciated.
Fixed mine....
Exactly the same problem with mine Thought I had blown it up. Left it for 5 mins then connected my USB(still no activesync connection and no lights or nuthin) but selected the MaUpgradeUt_noID.exe again and it just worked.
Hope yours works too.
No it doesn't help.
Hi! I know that it was long time ago, but how did you manage to solve the boot-loader problem?
I didn't.
Same problem with 2.06
Restart
It really helps. Restart and try again:good:
Had the same problem right now.
Reflashed MultilangROM - didn't help.
Reflashed Radio ROM - all's fine now