Related
The new version of Bluetooth 1.6.0600 is now available at
ftp://xda:[email protected]/BlueAngel/OEM_WWE_160_600.sa.CAB
I have installed it but I haven't tried it yet. I had no problem installing the cab manually or directly from the Extended ROM.
Does any one knows which are the corrected bugs in this version and what's new? Why this new version number (from 1.0.3500 up to 1.6.0600)? It looks like a major release to me. I hope it DOES solves the problems we have with Bluetooth and our Blue Angels.
Enjoy it!
ArtZ
thanks for this really a nice update
I can't install it! :x
It says that a dll is in rom and connot be overwrited ...
(how do you install using extended rom??)
Thanks
I guess Bluetooth has to be be turned "OFF" when you install the update.
I had no problem to install it. I will play with this update tonight at home
ArtZ
I tried with it off, even put it in the startup dir but it says the same error ...
Yeah!
Occur the same thing with me!
Can anyone say the reason for this?
It will be because of the ROM installed on int?
My device configuration is:
Rom Version: 1.22.00 WWE
Rom Date: 10/22/04
Radio Version: 1.06.00
Protocol Version: 1337.38
ExtRom: 1.22.126 WWE
Thanks.
If it can help, here's my device info:
Rom Version: 1.22.00 WWE
Rom Date: 10/22/04
Radio Version: 1.06.02
Protocol Version: 1337.38
ExtRom: 1.22.557 WWE
Thanks!
Hi,
i have the same problem.
the dll is in use or in rom
Thanks.
I have installed the cab in two ways as follows:
First way: I copied in my SD Card the OEM_WWE.160.600.ca.CAB and I launched from there with the Bluetooth turned "OFF" and all other communication ports closes ( No active USB for ActiveSync and/or Wi-Fi) and I had no problem to install it.
Second way: I have unlocked the Extended ROM and put the CAB there deleting the previous BT patches from the Belgium Extended ROM ver.557 (OEM_124_008.ca.CAB, OEM_Patche_12100401.sa.CAB, then, I deleted the two lines to install these patches in the Config.txt file to replace them the new CAB) and I had also no problems to install.
Hope that helps.
Regards,
ArtZ
Hmm..
Well. I got the same problem..
The file "\Windows\ace_ddi.dll" is in use or is in ROM.
What to do?
I had more of a problem even out of the cradle so I:
Renamed the files in the \windows
(My Resco Explorer complained that it was unable to delete but it renamed them any way
ace_ddi.dll
ahioem.dll
AudioGW.dll
BtCeIf.dll
BtCeProfiles.dll
BtCeStack.dll
BTChooserLib.dll
BtPhoneIf.dll
btrez.dll
BTTrayCE.exe
FrontLight.dll
Keybddr.dll
Serial_BTUR.dll
Serial_Cmd.dll
Wavedev.dll
wbtapiCE.dll
Then I installed the Cab from \Storage\temp
Bluetooth Reports 1.6.0 Build 0600
I have not tested if it works
Has anyone tried this on an XDA II with 2003SE?
I'm tempted to install it if it works.
It Worked!! Had to renew a few more file but it is running now.
Thanks MDAIIIUser!
I have a Verizon XV6600 and tried this. For whatever reason it instantly makes the phone stop working. Also the Bluetooth starts but also instantly turns off with the following message: "The Bluetooth Radio failed to turn ON due to insufficent driver memory available. You must perform a normal reset before you can trun ON the Bluetooth Radio."
Before I install (and risk another Hard Reset and new System Setup) the key questions:
1) Does ist improve BT-headset voice quality or stability?
2) Does it include or work with the High Quality Audio Profile for the HP BT-Headphones?
3) What are the recognizable improvements over the 1.0.0.3500 stack?
Any answers available?[/list]
Before checking the forum again i made the same procedure described by MDAIII user .
I have tested with my HB60 headset and its working fine so far..
RE
Its NOT working on O2 XDA II with WM2003SE.
The whole thing hangs
:evil:
How do I make the dlls visible in order to rename them?
I would like to install this on an XDA II but I cannot see the dll files in the Windows directory.
How do I make them visible in file explorer so that I can rename them?
RE
Just go to File Explorer --> Windows and tap the screen and hold it there. A box will pop up and you'll be able to see 'View All Files'
Broadcom Bluetooth 1.6.0600 cab available here
Hi all
I did this update 3 times, the install went ok, but me BT signal
is not very good, it swings up and down..
Did this only happen for me ??
I have a 9090 bought in Dubai. I am now getting a bluetooth expired message and the imate help desk told me that I must get a ROM upgrade from the Qtek suppliers. Problem is that they all give a country error. Is there a patch for the bluetooth expiry problem? Is there a ROM upgrade that is open for all Qtek 9090s? thanks Bill
You may just try the BT upgrade to 3900 (file on FTP server) or try to correct the Country error with GetDeviceData.exe also on the FTP site plus the instructions of the other thread about upgrading QTEK
Joao Caldeira
Sorry, but the 3900 does not seem to work (at least out of the box)
Just tried it and started to receive that message.
Joao Caldeira
Someone has posted the attached file and said that it can fix BT license expired error. I have not tried it myself, so use it on your own risk.
To use it - extract archive to your PocketPC and run EXE file.
Thanks.
I'll try it as soon as I have my cradle.
Joao Caldeira
Hi.
No more License expired message, but I'm not being able to pair with my BT Headset HBH-660.
Maybe I'm doing somethiing wrong... I'll check it out...
Thanks,
Joao Caldeira
OK.
Paired the device. When trying to "connect" the QTEK showed failes.
Turn BT off and on and everything is working.
THANKS
Joao Caldeira
BT_key
I copied the two extracted files over to myQtek 9090 and opened the exe file. A list of BT addresses came up and a write key icon. When I try to select a BT address and write it, I get the following message: ResetMFG(). DeviceIoControl(). FL_IOCTL_BDK_OPERATION fail!
Am I doing something wrong - I copied the files into my documents on the 9090 and ran the exe file through file explorer on the Qtek.
Thanks,
Bill
BT_Key
Thanks. This solved my problem.
I was getting this message everytime I turned bluetooth on:
Sorry! Bluetooth can no longer be used because the license has expired.
BDA: 00:00:00:00:00:00
Key:
E3E534E19B3E8214C543A
73C0A8B9A9074DD3B175
3515CD8
For some reason after a System ROM upgrade, my bluetooth device showed what it looks like a mac address as 00:00:00:00:00:00. This tool fixed the problem.
For anyone that is running into the Bluetooth License problem please try this.
DJ
Yes it does.Seems after upgrade BT have no mac adress so this "thingie" writes it down in some register.Any way done job for me.
Damn.. same thing happened to me today (
Reset time\soft reset not work
the fix when i launch i get "ResetMFG(). DeviceIoControl(). FL_IOCTL_BDK_OPERATION fail! " too..
Is there another way to set up a mac address? :O
Chooo
Upgraded to 3900... still 00:00... BDA and that fix program doesn't work!
Chooo
well in WM2003 rom they use old versions of the Bt stack thats why it shows license error
Ok.. but.. it's normal as answer? ^_^;;;
No mistaken.. thx for let me know this.. but danguard is already dead here in italy.. how the hell can i fix? I dont want to install a wm5, there isn't a way in registry to rewrite BT?
Chooo
The BT update worked for me.
FYI
I have tested 3900 and now 3500... nothing..
i want to try other stack,like this : OEM_WWE_160_600.sa.CAB
but.. how can i delete used file "audioGW.dll"?
Chooo
mamaich said:
Someone has posted the attached file and said that it can fix BT license expired error. I have not tried it myself, so use it on your own risk.
To use it - extract archive to your PocketPC and run EXE file.
Click to expand...
Click to collapse
I just want to give a short feedback.
I was experiencing the license-problem since a ROM-Update failed and my extended ROM was deleted. After hours of resaerch I finally found your post and I have to thank you very much! With this small file now everithing seems to work as it should again!
I can only recommend it to everyone with the same problem!
Greetz from Germany!
I really like having the MS Voice Command app, but I'm having problems installing it and getting it working with the new I-Mate ROM.
Is any one else seeing issues?
Thanks
I was having the same problem. What fixed mine is removing the 1.5 Voice Command update from my desktop only and then trying to reinstall.
If all else fails, try this:
1. Remove Voice Command from both desktop and phone.
2. Install old VC (1.0) to desktop and phone.
3. Remove 1.0 from just the phone and soft reset it.
4. Install 1.5 update to both desktop and phone.
Hopefully that should do it. Best of luck, I hope this helps!
-Laz
@cliffai Already have a post about this...check link below:
http://forum.xda-developers.com/viewtopic.php?p=241813#241813
A few people seem to be having similar issues with the K-JAM AKU2 ROM. I used the process i have used on the older ROM's and it went fine for me.
1. Begin installation of VC 1.0 on the PC however when the installation on the device asks where you want to install, i pressed cancel.
2. Start setup of VC 1.5 on the PC and also do not let the install continue on the device.
3. Browse to x:\program files\microsoft activesync and locate the voice command 1.5 folder that was created in step 2 and copy the installation cab file to the device and execute using the inbuilt file manager / total commander etc. At this point, the installation should continue fine.
The Microsoft documentation states that the original VC should be installed to the PC (so ActiveSync can see the files) but removed from the device. As it was written for WM2003 etc i thought i would test the install without the original VC having ever been installed to the device and it works great. I really dont like installing non WM5 compatible apps on the K-JAM even if uninstalling straight away so i was way pleased this worked for me.
NOTE: In fact i have since realised that if installing VC 1.5 using the cab file instead of PC ActiveSync setup you do not even need to use the VC 1.0 setup at all as its only the PC ActiveSync setup that looks for the older version.
Chris
I loaded the base 1.5 install on the new SHIPPING version of the Imate Rom - no problems. Went right in without a peep and works fine.
Thanks Guys - going with the direct 1.5 cab method seems the easiest and worked
Ms VC 1.5 is working like a Charm...I use Cabs to instal and then fix to complete the installation...sound quality and clarity is much better I wud say best as compared to XDA2/2s/Uni (WM5 only)
hey everyone. I downloaded WM6 with voice command 1.6 built in (cool huh?). Well yeah. The only problem is that now when I try to remap my bluetooth headset to voice command via the registry hack, the path is COMPLETELY different. its no longer under OEM, but under microsoft, and...yeah, its just different. I wanted to know if the registry hack was still possible since I have it built in to the ROM? and if so, how would I do it?
ok, so I decided to try to not act like a noob and I searched throughout most of the threads that involved voice commmand in this forum. Molski suggested that you copy the "voice command.lnk" from the \windows\ folder to the \windows\StartUp folder. this didn't seemt to work. are there any other suggestions or is it just not possoble on WM6? if so, i'll go back to faria's 3.3 ROM
So where can I download WM6?
Nevermind, I found the thread and how it has been removed.
doctajay said:
ok, so I decided to try to not act like a noob and I searched throughout most of the threads that involved voice commmand in this forum. Molski suggested that you copy the "voice command.lnk" from the \windows\ folder to the \windows\StartUp folder. this didn't seemt to work. are there any other suggestions or is it just not possoble on WM6? if so, i'll go back to faria's 3.3 ROM
Click to expand...
Click to collapse
It seems not too wise to refuse from such a great rom because of VC...
BTW it was mentioned that the "integrated" VC is not able to use BT.
All you need is re-install VC v1.6 and all will be nice (at least for me).
If you don't like to waste storage space you just may modify the installation cab with changing default directory to "windows" and it will "overlap" the integrated version.
Vladimyr said:
It seems not too wise to refuse from such a great rom because of VC...
BTW it was mentioned that the "integrated" VC is not able to use BT.
All you need is re-install VC v1.6 and all will be nice (at least for me).
If you don't like to waste storage space you just may modify the installation cab with changing default directory to "windows" and it will "overlap" the integrated version.
Click to expand...
Click to collapse
You are very wise my friend. I simply installed VC 1.6 and everything worked!!! I can now activate VC through my Jabra BT250V! Thank you so much!
hi,
I flashed my phone with this rom V-LITE 4.3 COBALT and my bluetooth has stopped working ie not icons or picking up any devices like my cars bluetooth.
I have done the following so far:
1) hard reset the device
2) reinstalled the above rom
3) reinstalled another Jack's lite 4.3 rom
4) checked the windows directory for BtSdKCE30.dll & BtCoreIF.dl but could not find the files.
even when there is no software installed still the same issue, any help or guidance will be appreciated.
edit:
i have tried few other roms now and two seem to the generic ra3 one and also energyrom (my guess is that these are full roms while the ones i was trying were lite one so missing a lot of drivers)
I have installed the v-lite 4.3 as its the one i really like but keep getting the following for bluetooth.
"Problem with bluetooth hardware" error does anyone know how i can fix this? does it need updated drivers or something?
update,
I have got the bluetooth to work by renaming the following file to
Windows\BTHCI.dll.old
the restart the phone and it will recreate it again
but it still does not pick up my car bluetooth but picks up other phones without any problems.
there so many BT files within Windows folder but not which one to change or rename
hi,
if anyone gets this issue, on the following link the is a cab installer which has now fixed my issue with icons and picking up my hands free car kit.
http://forum.xda-developers.com/showthread.php?t=504620
thanks
a5ian300zx said:
update,
I have got the bluetooth to work by renaming the following file to
Windows\BTHCI.dll.old
the restart the phone and it will recreate it again
but it still does not pick up my car bluetooth but picks up other phones without any problems.
there so many BT files within Windows folder but not which one to change or rename
Click to expand...
Click to collapse
I got the "Problem with bluetooth hardware" error when I try to add new bluetooth device.
I try to rename the "Windows\BTHCI.dll" file using total commander, but the file could not be renamed nor deleted.
Is there anything else I need to look out for?