Related
The desire is to CID unlock the 8125 so the phone can be Summiter-ized. This was new-in-the-box from Cingular:
ipl 2.25
spl 2.25
GSM 02.25.11
OS 2.25.11.1
I saw faria's post http://forum.xda-developers.com/viewtopic.php?t=47848 but it states this won't work above 2.21.
I believe I can downgrade to the 1.08 original stock image posted in the FTP area, but I'm not certain this will work. I read where someone tried downgrading and the spl remain 2.x and things didn't work out so well. This is where I read it: http://forum.xda-developers.com/viewtopic.php?t=50768&postdays=0&postorder=asc&start=75
The quote directly above is from the lokiwiz0.3 thread http://forum.xda-developers.com/viewtopic.php?t=50768 - but no one's actually confirmed it will unlock Cingular's latest ROM. Folks there just mention up to about 2.21 or so and the thread shifted to talk about the G4 chip and it's challenges.
Has anyone with a new Cingular phone tried lokiwiz0.3? Or how about CID unlocking anything higher than a 2.21 ROM? I'd just try this myself, but I'm stepping a buddy through this remotely. I can carry him all the way with URLs, cool cabs, and tweaks, all I need help with is something I haven't personally had to face - I don't wish to brick his phone.
Thanks for any testimonials!
Is it G3 or G4 phone? If it's a G4 phone then you can not downgrade to 1.x Rom as they don't include G4 bootloader.
kyphur said:
Is it G3 or G4 phone? If it's a G4 phone then you can not downgrade to 1.x Rom as they don't include G4 bootloader.
Click to expand...
Click to collapse
It's G3; there's no trailing decimalization on the ipl / spl.
I have the same ipl/spl, and the unlock tool did not work for me, i would also like to know if its possible to downgrade this rom...
Give it a try.
I think you might need to replace one file, "RUUGetInfo.exe".
Try this:
Download the Cingular 1.8 Rom.
Rename it from *.exe to *.rar
Open the rar and extract the files into an empty folder.
Replace the "RUUGetInfo.exe" file with the attached one.
Run RomUpdateUtility.exe
If everything worked it will think you phone has ver 1.2 Rom so it will allow the 1.8 upgrade.
As always, try at your own risk...
Is this the rom i should be using? ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Im having problems finding the original Cingular 1.8 rom anywhere...
virtualsandwich said:
Is this the rom i should be using? ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Im having problems finding the original Cingular 1.8 rom anywhere...
Click to expand...
Click to collapse
No.. Not CID unlocked, use the Cingular 1.8:
ftp://xda:[email protected]/Wizard/Roms/Cingular/Cingular_RUU_1.8.11.1.WWE.ship.exe
before downgrading to a 1.x rom be sure your IPL/SPL version DOES NOT END WITH .0001
kyphur said:
virtualsandwich said:
Is this the rom i should be using? ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Im having problems finding the original Cingular 1.8 rom anywhere...
Click to expand...
Click to collapse
No.. Not CID unlocked, use the Cingular 1.8:
ftp://xda:[email protected]/Wizard/Roms/Cingular/Cingular_RUU_1.8.11.1.WWE.ship.exe
before downgrading to a 1.x rom be sure your IPL/SPL version DOES NOT END WITH .0001
Click to expand...
Click to collapse
hi friend...
did you manage to unlocke the pda?
faria said:
hi friend...
did you manage to unlocke the pda?
Click to expand...
Click to collapse
If you are asking me, mine has always been CID unlocked, just trying to help the new guys a bit...
kyphur said:
faria said:
hi friend...
did you manage to unlocke the pda?
Click to expand...
Click to collapse
If you are asking me, mine has always been CID unlocked, just trying to help the new guys a bit...
Click to expand...
Click to collapse
haa.. tough it was you
Alright i got it unlocked without replacing RUUGetInfo.exe, i downloaded the 1.8 rom, the phone took it without problem, then Lokiwiz worked like a charm after downgrading the rom. THANKS!
virtualsandwich said:
Alright i got it unlocked without replacing RUUGetInfo.exe, i downloaded the 1.8 rom, the phone took it without problem, then Lokiwiz worked like a charm after downgrading the rom. THANKS!
Click to expand...
Click to collapse
So just to be clear, you had a brand new store bought or telesales Cingular 8125 CID locked with ipl / spl 2.25 and you simply re-flashed it with the stock Cingular 1.08 ROM - and it worked?
If you haven't re-flashed already, would you mind sharing the ipl / spl (and other) versions?
100Tbps said:
virtualsandwich said:
Alright i got it unlocked without replacing RUUGetInfo.exe, i downloaded the 1.8 rom, the phone took it without problem, then Lokiwiz worked like a charm after downgrading the rom. THANKS!
Click to expand...
Click to collapse
So just to be clear, you had a brand new store bought or telesales Cingular 8125 CID locked with ipl / spl 2.25 and you simply re-flashed it with the stock Cingular 1.08 ROM - and it worked?
If you haven't re-flashed already, would you mind sharing the ipl / spl (and other) versions?
Click to expand...
Click to collapse
humm ....yes... i would like to know that to...
Latest G3 Cingular ROM update worked
It works for me too. I just ran lockwiz3.0a to unlock SIM, than downgraded to ver 1.8. Then run lockwiz 2.0b to unlock CID and then install latest custom AKU3.0 ROM. Thanks everyone contributed to that forum.
Work for me. Here's what i did to my new (warranty exchange) 8125 with IPL/SPL 2.25
- unlock SIM lock with Lokiwiz03a
- downgrade to 1.08 with Cingular_RUU_1.8.11.1.WWE.ship.exe
- it now has IPL 1.08 and SPL 2.25
- unlock CID with Lokiwiz02b
- upgrade to PDAMobiz AKU2.3 v120 (the best ROM i've tried so far)
I believe you could skip SIM unlock with Lokiwiz03a and unlock both SIM and CID with Lokiwiz02b after downgrade to IPL1.08/SPL2.25.
dont know why other people in Lokiwiz03a thread said not to do unlock if IPL and SPL are not the same and will brick the phone. may be he had G4 chip.
kanate said:
dont know why other people in Lokiwiz03a thread said not to do unlock if IPL and SPL are not the same and will brick the phone. may be he had G4 chip.
Click to expand...
Click to collapse
G4 phone can't downgrade at all. 1.x Roms do not have G4 Bootloaders.
A few users have had problems when their IPL/SPL versions don't match. So there is the possibility that you will brick your phone.
Did you bother going into the OS on the phone at all after the downgrade to unlock? or did you just connect it to USB and run lokiwiz?
kyphur said:
kanate said:
dont know why other people in Lokiwiz03a thread said not to do unlock if IPL and SPL are not the same and will brick the phone. may be he had G4 chip.
Click to expand...
Click to collapse
G4 phone can't downgrade at all. 1.x Roms do not have G4 Bootloaders.
A few users have had problems when their IPL/SPL versions don't match. So there is the possibility that you will brick your phone.
Did you bother going into the OS on the phone at all after the downgrade to unlock? or did you just connect it to USB and run lokiwiz?
Click to expand...
Click to collapse
Sure thing, you need to sync and go into the OS to install EnableRapi.cab in order to use Lokiwiz02b anyway.
After it's downgraded to IPL1.08/SPL2.25, I let the phone customized itself with all those cingular things and reboot again and install EnableRapi.cab and run Lokiwiz02b to unlock the CID
I have the IPL/SPL 2.25 version of the 8125 ROM.
For some reason, after unlocking with lokiwiz03a, downloading and unpacking etc the 1.8 ROM, i run it and get an ERROR 202: Connection, that it doesn't find my phone
The phone IS connected, synched etc etc. Could this be a problem because I'm running windows vista?
hmm.
edit: with windows xp, I can begin the flash (my 8125 goes to the tri-color, displays IPL and SPL of 2.25, but then the program throws an ERROR 260: UPDATE ERROR, then tells me the recovery steps (it always jsut boots to WINCE after this.)
Anyone know whats up?
Quote:
"Work for me. Here's what i did to my new (warranty exchange) 8125 with IPL/SPL 2.25"
key words being warranty exchange?
or will this work on a brand new one?
just thought I'd ask
and to Clutch: how's the phone now? How exactly does one know of the Ipl/Spl #'s?
I believe as long as it's G3 chip (IPL & SPL don't end with 0001), it should work.
Hi,
I've installed the latest AKU 3.2 Version on my Wizard.
Now i've wanted to downgrade to AKU 2.0 (with the original Loader Provided from "Vario_AKU2.0_05-2006.exe") and the tool tells me it is not possible. Is there a way to make it run?
Thanks a lot
It looks like nobody has an idea how to downgrade from SPL2.xx en that sucks! noboby warns about it when supplying new ROMS..
I have the same problem with a TMobile Vario that needs to be flashed to stock ROM\IPL\SPL..
I've found a way to do it but its for the HTC Thyfoon and might not work with the Wizard..
Nobody warns ??????????????????????????
Gramma told me that if I don't have something nice to say to keep quiet...
Maybe if you downgrade to a 1.xx ROM first you can then go back to your AKU 2.
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Good luck.
mforce said:
It looks like nobody has an idea how to downgrade from SPL2.xx en that sucks! noboby warns about it when supplying new ROMS..
I have the same problem with a TMobile Vario that needs to be flashed to stock ROM\IPL\SPL..
I've found a way to do it but its for the HTC Thyfoon and might not work with the Wizard..
Click to expand...
Click to collapse
There are tons of threads on this issue already... maybe if you are hardworking enough to search for it yourself, you won't even have that problem at all... warnings are placed everywhere... please read before you even proceed to upgrade your rom...
Dr Puttingham said:
Gramma told me that if I don't have something nice to say to keep quiet...
Maybe if you downgrade to a 1.xx ROM first you can then go back to your AKU 2.
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Good luck.
Click to expand...
Click to collapse
Already tried that, not working.. btw wise gramma
vseehua said:
There are tons of threads on this issue already... maybe if you are hardworking enough to search for it yourself, you won't even have that problem at all... warnings are placed everywhere... please read before you even proceed to upgrade your rom...
Click to expand...
Click to collapse
I've searched for hours the two solutions Boots 1.05 end Cingular 1.8 do not work but if you are so sure their is an solution ill keep searching
Ofcource I know about warnings but ive NEVER seen an warning about SPL not being able to downgrade..
Possible solution
A German mate told me that there is a solution
Try to load the Qtec Custom Rom from ...
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
.. and Flash it to your Wizard. After that is should be possible to load older Roms without any problems.
I did not have tested it... (Please tell me if its works or not).
mforce said:
Already tried that, not working.. btw wise gramma
I've searched for hours the two solutions Boots 1.05 end Cingular 1.8 do not work but if you are so sure their is an solution ill keep searching
Ofcource I know about warnings but ive NEVER seen an warning about SPL not being able to downgrade..
Click to expand...
Click to collapse
If you have a G3 device you can downgrade your IPL/SPL. I've done it my Cingular 8125 and it's 3 replacement PDA's numerous times. In addition I've downgraded at least 20 phones to 1.05 so's I could unlock and then upgrade. And then done it again. If you follow faria's instructions that is.... Now I HAVE had to flash the 1.05 twice to get the SPL down to 1.05. Humor us huh?
Note: I realize that Faria says that it doesn't work above 2.21 but I have performed this procedure on at least a dozen "out of the box" Cingular 2.25's. Downgrade to 1.05. Extract lokiwiz to the root of your C drive. Copy enablerapi.cab to your device (I know that you've unlocked your device, just indulge me please ) Execute enablerapi.cab from your PDA. get to a Dos prompt and run lokiwiz from the C prompt. Unlock CID and SIM. It WILL reboot each time. If your IPL / SPL still show a 2.x reflash again with the 1.05.
If you do this I'll just about guarantee that it'll work
Good Luck!
Dr Puttingham said:
If you have a G3 device you can downgrade your IPL/SPL. Unlock CID and SIM. It WILL reboot each time. If your IPL / SPL still show a 2.x reflash again with the 1.05.
If you do this I'll just about guarantee that it'll work
Good Luck!
Click to expand...
Click to collapse
Your garantee worked great fabulous work ! I downgraded my Dutch MDA Vario from official Tmobile Rom RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship.exe with 2.21 IPL.SPL to 1.05. Indeed needed to run WWE flashrom - did the Lockwiz2b CID unlock and ran the Flashrom WWE again and voila IPL/SPL 1.01 - OS 1.5.4.2 -GSM 1.12.10.0 - Thanks a lot!!
I owe you one ..
Hi,
i want to downgrade my 2.21 G3 Vario as well which is NLD and locked. I believe that I know all the steps neccesary and already downed the QTEK custom ROM. Can I just execute this ROM and have it install the older version on my Vario, run lokiwiz02b and upgrade again?
One part I didn't find on the forum was the need to run "WWE flashrom" again to downgrade to 1.05
What is this WWE flashrom, is it a seperate tool besides the Custom rom and if yes where do I get it?
thanks,
stefan
A2Z said:
Your garantee worked great fabulous work ! I downgraded my Dutch MDA Vario from official Tmobile Rom RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship.exe with 2.21 IPL.SPL to 1.05. Indeed needed to run WWE flashrom - did the Lockwiz2b CID unlock and ran the Flashrom WWE again and voila IPL/SPL 1.01 - OS 1.5.4.2 -GSM 1.12.10.0 - Thanks a lot!!
I owe you one ..
Click to expand...
Click to collapse
Great! it works
stefan1975 said:
Hi,
i want to downgrade my 2.21 G3 Vario as well which is NLD and locked. I believe that I know all the steps neccesary and already downed the QTEK custom ROM. Can I just execute this ROM and have it install the older version on my Vario, run lokiwiz02b and upgrade again?
One part I didn't find on the forum was the need to run "WWE flashrom" again to downgrade to 1.05
What is this WWE flashrom, is it a seperate tool besides the Custom rom and if yes where do I get it?
thanks,
stefan
Click to expand...
Click to collapse
This one.. (flash it 2 times!)
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Seppl82 said:
A German mate told me that there is a solution
Try to load the Qtec Custom Rom from ...
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
.. and Flash it to your Wizard. After that is should be possible to load older Roms without any problems.
I did not have tested it... (Please tell me if its works or not).
Click to expand...
Click to collapse
Does NOT work, thnx anyway
I have the same problem.
But i allready downgaded with the Custom version.
When i restart i can see. it is IPL 1.01 and SPL 2.26
Is it possilble olso downgrade the SPL (i do not exactrly know what it is)
Downgrading/Upgrading
Dr P. or anyone else,
I've seen "somewhere on this board" a description of how to flash "any rom" without having to downgrade to 1.05, it stated to change the .exe file to a .rar and then change the ruu file to one that is not looking for the current phone status. I've tried that and have not had success in doing so. IF there is infact a way to do this, could someone please provide a blow by blow scenario to accomplish it?
Thanks,
vpu2
HighVoltage said:
I have the same problem.
But i allready downgaded with the Custom version.
When i restart i can see. it is IPL 1.01 and SPL 2.26
Is it possilble olso downgrade the SPL (i do not exactrly know what it is)
Click to expand...
Click to collapse
Bet you didn't run the 1.05 a second time as I stated before. I'm actually doing a brand new Cingular G3 2.25 as we speak. I downgraded to 1.05, SPL still says 2.25. Copied enablerapi to the device and executed it from the device. Extracted lokiwiz to the root of my E drive (on my new thinkpad that I'm setting up at the same time...) It rebooted twice as it's susposed to when you unlock the CID and the SIM. Ran the downgrade a second time and both IPL and SPL are 1.01, the GSM is 1.12.10.0 and the OS is 1.5.4.2.... every freak'n time I do this, probably close to two dozen Cingular 8125's. If it don't work for you I just don't know what more to tell ya....
Dr Puttingham said:
Bet you didn't run the 1.05 a second time as I stated before. I'm actually doing a brand new Cingular G3 2.25 as we speak. I downgraded to 1.05, SPL still says 2.25. Copied enablerapi to the device and executed it from the device. Extracted lokiwiz to the root of my E drive (on my new thinkpad that I'm setting up at the same time...) It rebooted twice as it's susposed to when you unlock the CID and the SIM. Ran the downgrade a second time and both IPL and SPL are 1.01, the GSM is 1.12.10.0 and the OS is 1.5.4.2.... every freak'n time I do this, probably close to two dozen Cingular 8125's. If it don't work for you I just don't know what more to tell ya....
Click to expand...
Click to collapse
Hi Guys,
I tried everything but it doesn't help das anyone had another option?
Thanks
could you be any vaguer? "tried everything" is so informative. report exactly the steps you've tried please.
Dr Puttingham said:
could you be any vaguer? "tried everything" is so informative. report exactly the steps you've tried please.
Click to expand...
Click to collapse
I tried everything what everybody said in this post.
Mr hokkie, please humble me and document exactly what device you own and your exact IPL/SPL/OS/GSM versions. Beacuase I just don't think that you've got in in ya to be my first failure. Show me what you got
I own a Dutch MDA Vario from T-mobile, which has a T-mobile SIM-lock. I want to remove the SIM-lock, so I tried http://forum.xda-developers.com/showthread.php?t=249474&page=1. Unfortunately it returned an error, it appears I have a 2.21 ROM, so I want to downgrade the rom, which brought me to this thread.
I've downloaded the CUSTOM_RUU_Wizard_1050412_WWE_101_11210_WWE.exe, and ran it. I get the first few screens (the caution-screen, the prepare-screen, the Update screen, the verify screen and the last screen). After that I get the screen where a percentage bar should start moving. My phone-screen is now divided in about four horizontal parts.
The first one is red-fading to black, and it reads RUU on the top-right, and the line below it reads IPL 2.21.0001. The last line in this part reads SPL 2.21.0001.
The second part is similar to the first, but it is green, without any text. The third part is similar to the green one, except it's blue.
The last part is smaller than the previous parts, it's plain white (about two lines high) and reads USB.
On my PC I get a screen telling me:
ERROR[300]: INVALID UPDATE TOOL
This Udate Uility cannot be used for your PDA Phone. Please get newer Update Utillity.
What am I doing wrong here? (BTW: I'm a computer-expert and a phone-noob)
By the way, the verify screen reads:
From:
Model ID: WIZARD
Image Version: 1.2.0.0
Language: ENGLISH
To:
Model ID: Prodigy
Image version:
Language: WWE
I'had read the thread about the radio ROM that the 2.x radio rom doest support with device with 1.x bootloader like the 1.x IPL and SPL..
My device have:
IPL 1.01
SPL 2.26
how was that?.. is my bootloader version 2 or 1?
sorry.. im new to wizard.. i just sell my himalaya and got wizard just yesterday..
ok nevermind..
i tried to flash 2.19 and 2.47 radio ROM without any problems.. means im 2.x bootloader..
If you don't fix your IPL you're going to have problems...
fixing IPL?
why?..
Because you're running 1.x IPL, that's why.
But, if it works for you, great.
i thought that all my problems are solve now regarding upgrading rom in wizard..
still have to find out how fix my IPL..
do you mean fixing is by upgrading my IPL to higher?
double_ofour said:
i thought that all my problems are solve now regarding upgrading rom in wizard..
still have to find out how fix my IPL..
do you mean fixing is by upgrading my IPL to higher?
Click to expand...
Click to collapse
i had the same situation whn my wiza was cid locked. i flashed it with Button;s rom and got the same situation: mixed IPL/SPL. I made cid unlocked procedure and then flashed the rom that contained IPL/SPL for my device.
i think im getting the logic here..
i should find a rom that contain 2.xx IPL/SPL to be able to upgrde in 2.xx IPL..
better search for that..
thanks for the help..
double_ofour said:
i think im getting the logic here..
i should find a rom that contain 2.xx IPL/SPL to be able to upgrde in 2.xx IPL..
better search for that..
thanks for the help..
Click to expand...
Click to collapse
I suggest the T-Mobile 2.26. In my tutorial you'll find the working link.
Good luck
Thanks Dr Puttingham..
im now getting familiar to wizard..
Hi all. Tried and tried in vain, to replace the T-mobile splash screen, only to find out that the phone is CID locked.
Managed to upgrade to WM6 though, thanks to vlodeck and nocturne.op.15
Here's the phone details:
IPL: 2.06
SPL: 2.06.0000
GSM: 02.19.21
OS: 10.2.0.8 (WM6 by vlodeck & nocturne)
Oh, and also worth mentioning, my PC is running on Vista Ultimate, on which RUU's don't work. But some people said that if I install VMWare Virtual PC and install XP on that, RUU works through it.
So, how to unlock CID of this phone?
Wish I knew!
I'm in the same boat, so please can someone advise, thanks.
to cid unlock to need a ver. 1.xx of ipl/spl. And seeing you have 2.xx you cant really downgrade to ver.1.x
but can you told me whats rom have ispl ipl 1.x??
ok so saying you have ipl 1. what ever how do you cid unlock?
ftp://[email protected]/Up...er_1120223_11202110_11220_T-MobileUK_Ship.rar
will have ipl and spl ver 1. wherever you can get to install or not, might work with a noID ruu. then you can use lokiwiz2 to unlock the CID
There are rom versions that have 1.xx IPL and SPL but from my own experience I know, that once you upgraded to 2.xx or more, you cant get back to 1.xx. The most you can get is 1.xx IPL and 2.xx SPL.
Cheers,
vlodeck.
So, What ROM we must flash? To have 1.xx IPL and 2.xx SPL?
Maybe offtopic, but I have another question: If I have ROM from ERA GSM POLAND can I flash AKU3.3 TMobileUK ROM?
Charmer community is so small.... ;(
adexxx, you misunderstood me. You can't get 1.xx IPL and 1.xx SPL once you've already upgraded to 2.xx.
If it's an official ROM then you can flash it no problem. If its a custom ROM, use the tool I described in WM6 charmer thread.
When I tried to update with RUU: RUU_Charmer_38221_382127_026921_TMO_HR_WWE_Ship it showed error: INVALID VENDOR
What I'm doing wrong?
use wizard noID upgrade utility. it's some around here, maybe even in charmer forum.
OK, I flashed and it works fine.
Now I have 3.0 IPL&SPL, my 1st splash was changed.
[offtopic end]
Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
you say with the wm6 oficcial there is not a official rom for wizard tellme what rom do you used
AndyG said:
Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
Click to expand...
Click to collapse
I bet you went from 1.02 to 3.08 without stopping at 2.xx
Maybe that's the cause?
but he says than he flashed with the oficcial rom there is no oficcial are agree
Hi Guys,
Thanks for the quick replies.. I used
http://forum.xda-developers.com/showthread.php?t=310954
( about quarter way down it says official download site for WM6.0.0)
Mestrini - Yes i went straight from 1.02 to 3.08 coz i cannot find the V2.xx IPL/SPL files but i have found the updater solely for the IPL/SPL to 3.08 which is what i used.
is that any use ??
flash your phone with the tmobile 2.26, that should correct your issue. It will also give you the 2.26 version of spl/ipl
ok if you had a cid unlocked device search in the forum for the t-mo 2.26 ipl/spl after you can update for the rom as you tell
en joy it
Thanks for the advice guys, ive tried several different roms and i have a consistent problem where it will not let me change the rom as ( i think ) my SPL version is still 3.08 and every ROM bombs out with "this is an upgrade only"
help me downgrade my IPL/SPL back to 1.02 pleaseeeee
cheers.
Andy
jb007jb
Junior Member
Join Date: Jul 2007
Posts: 6
Default Do Not Upgrade To 3.08 !!!!!!!!!!!!
Hi,
i have T-Mobile MDA and Im stuck with spl 3.08
I did everything.......... and I mean EVERYTHING and nothing helps me bring back my MDA to the original T-mobile software or downgrading the SPL.
1. Downgrading my IPL to 1.01 (using button rom)
2. Unlocking CID with lokiwiz (successfully)
3. Running button rom again
The SPL still stays 3.08 after doing the above...
If there is another way to downgrade the SPL 3.08, please let me know. I really need the T-mobile original rom version.
Thanks so much.
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Reply With Quote
Click to expand...
Click to collapse
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
Thanking everyone who has taken the time to contribute
Andy. ( looking hopefully around too ;o) )
AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
Click to expand...
Click to collapse
Thats your problem, reflash the 1.02 rom again, both IPL and SPL have to be the same.
hey nottoosmart
i know... i need to find a way to drop the SPL back to 1.02 or thereabouts. i cant flash back to the T-Moblie 2.26 ROM coz it says my SPL is too high. i upgraded my IPL and SPL using a rom updater now whatever i try i cannot drop the SPL version.
AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
...
Andy. ( looking hopefully around too ;o) )
Click to expand...
Click to collapse
Maybe, just maybe, the O2 ROM may help you. Please see http://forum.xda-developers.com/showpost.php?p=1379884&postcount=2 That post is from vippie - so you know that you can rely on it!
kernelguy