I can't instal any rom on my P3600, each time the process reaches 99% I get an 262 error from RUU and I can't install any ROM on my HTC P3600 !
Any idea ?
jm007 said:
I can't instal any rom on my P3600, each time the process reaches 99% I get an 262 error from RUU and I can't install any ROM on my HTC P3600 !
Any idea ?
Click to expand...
Click to collapse
Which ROM are you trying to install? If its the dopod d810 official wm6 SEA or ANZ rom then it won't work....you will have to install those roms-without-spl, which are available in this forum.
Related
Hi all,
I own an I-mate Kjam with an official ROM 2.18.9.1 ITA. I would like to flash my kjam with a not official ROM, because they stopped to upgrade this device.
In order to flash the new ROM I should need to CID unlock my device and to do this I should downgrade to the ROM 1.xx.x.x.
I tried to do that but an error occurred and stopped the process. This error come out because it isn't possible to downgrade from this Rom version (this is the meaning of the error message). The same is written in the I-mate official site, "it is not possible to come back from this ROM version".
Is it possible to find out an alternative way the flash my device?
Thanks in advance.
Double Post
rainer_70 said:
Hi all,
I own an I-mate Kjam with an official ROM 2.18.9.1 ITA. I would like to flash my kjam with a not official ROM, because they stopped to upgrade this device.
In order to flash the new ROM I should need to CID unlock my device and to do this I should downgrade to the ROM 1.xx.x.x.
I tried to do that but an error occurred and stopped the process. This error come out because it isn't possible to downgrade from this Rom version (this is the meaning of the error message). The same is written in the I-mate official site, "it is not possible to come back from this ROM version".
Is it possible to find out an alternative way the flash my device?
Thanks in advance.
Click to expand...
Click to collapse
Don't double post the same problem,wait for an answer and advise in your initial post.
Sorry for the mistake!
hi there
i started an upgrade to wm6 and the ruu sayd to me
error 294 - wrong seller ID
can anyone help me please? sorry for my bad english
zwischenzeilenleser said:
hi there
i started an upgrade to wm6 and the ruu sayd to me
error 294 - wrong seller ID
can anyone help me please? sorry for my bad english
Click to expand...
Click to collapse
www.trinityguides.info
it doesnt works...
on install hardware - spl i get
error 270 - update error
zwischenzeilenleser said:
it doesnt works...
on install hardware - spl i get
error 270 - update error
Click to expand...
Click to collapse
More details please!
Phone type: HTC, dopod, SPV etc..
Current rom version, current spl version, desired rom, steps what you did...
big mistery lol
the upgrade was successful... but now i have an other wm5 rom on my P3600 trinity... but it REALLY was the german wm6 rom (gps enabled... there is only one^^) i found it on xda-developers.com
can somebody explain?
Hello , i have a problem . I get error 300 when i try to reflash the device
error 300: This update utility cannot be used for your PDA Phone. Please get newer update utility.
i have IPL 1.08.0001 | SPL 1.08.0001
is there any way to fix it ?
zzone said:
Hello , i have a problem . I get error 300 when i try to reflash the device
error 300: This update utility cannot be used for your PDA Phone. Please get newer update utility.
i have IPL 1.08.0001 | SPL 1.08.0001
is there any way to fix it ?
Click to expand...
Click to collapse
lol! What kind of phone do you have? What rom are you trying to flash?
JLine05 said:
lol! What kind of phone do you have? What rom are you trying to flash?
Click to expand...
Click to collapse
HTC Herald. Actualy i don't own the phone , but there is someone i know that did this and i would like to know if it is possible to be fixed
zzone said:
HTC Herald. Actualy i don't own the phone , but there is someone i know that did this and i would like to know if it is possible to be fixed
Click to expand...
Click to collapse
I've never received that error. What rom are you/they trying to flash?
Your SPL and IPL are too low. Please update using the official WM6 ROM first.
If you have HardSPL, then you may have just bricked the phone as you wrote over the SPL with an SPL meant for a higher SPL device.
and how can we repair it. i tried flashing official wm5 rom, official wm6 rom and because i canont instal via usb(it begins the instalation then "try a newer update utility"), tried no vendor utility(still not working), i tried sd flashing but i get "sercurity level not cleared"(if using heradiag.nbh) and if not using heradiag.nbh it's checking the sd card and does nothing.
I'm using only official roms.
I have downloaded the original australian dopod rom for P3600i and i tried to install it to p3600 using SSPL BUT IT STOPS AT 28% with connection error 282.
is it compatible or should it be patched or change header or so to be able to install it???
if it should be patched can sombody explain how or upload a patched version
thanks
aalim said:
I have downloaded the original australian dopod rom for P3600i and i tried to install it to p3600 using SSPL BUT IT STOPS AT 28% with connection error 282.
is it compatible or should it be patched or change header or so to be able to install it???
if it should be patched can sombody explain how or upload a patched version
thanks
Click to expand...
Click to collapse
It should load without using SSPL. Just try running the ROM update while your phone is connected via Activesync.
I tried this but it says the phone is not compatible and if i try SSPL or Hard-SPL it stops at 28% with a connection error and i find the SPL returned to original.
may be P3600i has a different signature or a header than P3600
and my question is how to install the original P3600i into P3600 despite this
My be a patched version exists or a way to bypass this problem
i have installed new rom 1.56 (ita)
Then, to try some cooked rom with 6.5, i installed back an official rom 1.14 (ita)
i tryed after to install any 6.5 rom (davideuck6.5, lite-65, miriwm65,karmba_a_hd), the loader started to work but it blocked at 0% in pc and in the HD till timeout.
I reverted back with stock 1.14 , 1,15 , tried with hardspl, but with the same result.
Only officials roms (ITA) do not stuck at 0%.
With my diamond everything went fine, but with my HD i cannot manage to install any rom with 6.5 ..
any idea?
[email protected] said:
i have installed new rom 1.56 (ita)
Then, to try some cooked rom with 6.5, i installed back an official rom 1.14 (ita)
i tryed after to install any 6.5 rom (davideuck6.5, lite-65, miriwm65,karmba_a_hd), the loader started to work but it blocked at 0% in pc and in the HD till timeout.
I reverted back with stock 1.14 , 1,15 , tried with hardspl, but with the same result.
Only officials roms (ITA) do not stuck at 0%.
With my diamond everything went fine, but with my HD i cannot manage to install any rom with 6.5 ..
any idea?
Click to expand...
Click to collapse
Flash back to the old shipped rom that ur HD had...
Flash HardSPL
Flash the new coocked rom you want.
can't get the last rom thatHd had , i could find only an old 1.14 official rom and this rom load without problems. but after i can't install any 6.5 rom even after hardspl.
this is strange.
[email protected] said:
cant get last rom the Hd had , i could nd only 1.14 official rom and it load without problems. but after i can't install any 6.5 rom even after hardspl.
Click to expand...
Click to collapse
Are you sure you have installed HSPL properly??
Go into bootloader mode(press and hold volume down and switch on button at the same time), what value do you have on SPL??
It must be "SPL-1.14.OliNex", if not, you have not installed HSPL, so you have to try again.
[email protected] said:
i have installed new rom 1.56 (ita)
With my diamond everything went fine, but with my HD i cannot manage to install any rom with 6.5 ..
any idea?
Click to expand...
Click to collapse
I had also installed new rom 1.56 but then downgraded to 1.14 and I then entered the bootloader and used USPL 2.5 and I could easily install any of the 6.5 roms that i tried.
davideuck said:
Are you sure you have installed HSPL properly??
Go into bootloader mode(press and hold volume down and switch on button at the same time), what value do you have on SPL??
It must be "SPL-1.14.OliNex", if not, you have not installed HSPL, so you have to try again.
Click to expand...
Click to collapse
yes it say "spl-1.14 olinex"
i will try now with uspl .
thanks