Related
my device stuck at 75% when upgrading,now screen blank LCD,try to reboot at bootloader again,but I can't boot till 1%,then automatic prot out error,before that already try SSPL-Trin to boot a lot of version of win 6.1 rom but now stuck at 75%,if can stat window,I can handle it,try sync with device and open SSPL - Trin but system not support,(normaly down load SSPL- TRIN in device,go in to bootloader)please some one EXPERT out there can help me,Thanks
Eddie (Malaysia)
email address : [email protected]
1. Remove battery wait for a while and put it back
2. Charge battery to 70% minimum
3. Try again
4. Good luck
sa13o said:
1. Remove battery wait for a while and put it back
2. Charge battery to 70% minimum
3. Try again
4. Good luck
Click to expand...
Click to collapse
Try to boot from mini sd card,don't know which step make wrong,
1.Format to 32FAT
2.copy file .NBH to card,changed name to TRINIMG.nbh
3.put in to card slot
4.start bootloader
5.screen show loading......then at top have 0008xxx serial number??????
why can't get screen shown same like photo attach,so can't continue for next step to press start botton,coz turn back to bootloader screen.please that I make it wrong?please need ur all help
Share with ppl out there,Bootloader stuck at 75% whe upgrading Rom
sa13o said:
1. Remove battery wait for a while and put it back
2. Charge battery to 70% minimum
3. Try again
4. Good luck
Click to expand...
Click to collapse
Early,thank fou ur reply,my divice can turn on again.ha......ha....,I used Prof format,Extract the file http://rapidshare.com/files/46816571...1_108_Ship.exe (Official Rom Version :3.00.707.18,Radio version1.46.30.11)Aus Rom,then look for RUU_ sign.NBH,and rename to TRINIMG.nbh,copy file to Minisd card already format to FAT 32,And without Lable.soft reset divice at HTC home screen,and press and hold power botton and camera botton,with soft reset,after bootloader prot out,continue with white screen"Loading"and Checking,if match it will came out with same screen that Prof show at previouse post,then press power botton to boot,please plug in charger when botting step by step will show on boot screen(show radio -ok,OS-ok,and etc......wiat for completed.Now my device ok,I fill happy
just want to thank sa13o and to share with you all,when u get in problem,please make it easy and find out the way out,keep trying sure you can get the anwser at the end.
Hi
Can you give the correct rapidshare download link for the official ROM, i have Dopod D810 currently flashed with HTC P3600i official ROM, cannot download the HTC P3600i ROM from HTC site because of the serial number checker.
When i turn on my phone I get the Tri Colored screeen
and it says: Upgrade ROM error code please try again.
and then the phone turns off and on.... Please help....
please please HELP SOMEONE!!!!
Don't dispair! I had the same problem and got out of the situation: http://forum.xda-developers.com/showthread.php?t=505377&p=3677341
You probably have the wrong Original Rom from HTC installed (may wrong language).
To solve the situation you will need USPL. USPL will install. If you are using Windows Vista you will probably have to update the drivers (See the thread).
Once USPL is running install the Original HTC 1.56-ROM.
but how can i can i installl uspl if every time i get into bootloader it turns off after 10 seconds and then turns back on...
nobody else can help??????
Try to take out the battery for one minute or two, then see what happens when switching on.
If ok (usual start) make usual normal bootloader state, and see what is your SPL. Then decide which flash you have to do.
Mr. Nick said:
but how can i can i installl uspl if every time i get into bootloader it turns off after 10 seconds and then turns back on...
Click to expand...
Click to collapse
Flash back your original ROM, you don't need USPL to do this.
For your original ROM look at this link:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
If you have problem flashing with you PC, you can try to flash from SD just extracting the files from the original ROM exe you downloaded on a temp folder (you can use winrar to do it), rename the "ruu_signed.nbh" to "BLACIMG.nbh", copy it to the root of your SD card, and flash the rom from the tri-color screen by pressing the power button.
Then, if everything is fine and your phone work again, you can think to flash a coocked ROM using USPL.
NOTE: you can read the wiki to learn something more, start here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash1
please help me!!!!!
dalamario said:
Flash back your original ROM, you don't need USPL to do this.
For your original ROM look at this link:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
If you have problem flashing with you PC, you can try to flash from SD just extracting the files from the original ROM exe you downloaded on a temp folder (you can use winrar to do it), rename the "ruu_signed.nbh" to "BLACIMG.nbh", copy it to the root of your SD card, and flash the rom from the tri-color screen by pressing the power button.
Then, if everything is fine and your phone work again, you can think to flash a coocked ROM using USPL.
NOTE: you can read the wiki to learn something more, start here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash1
Click to expand...
Click to collapse
sir you don't understand.... how can i flash back to my original ROM if it turns off every 10 seconds when i turn the phone on......
and also.... if i press the button on top... nothing happens.... if i put the usb cable into the phone it will go into the tri- color screen
Mr. Nick said:
sir you don't understand.... how can i flash back to my original ROM if it turns off every 10 seconds when i turn the phone on......
and also.... if i press the button on top... nothing happens.... if i put the usb cable into the phone it will go into the tri- color screen
Click to expand...
Click to collapse
It mean your phone stay at bootloader? tri-color sreen with SPL you can see. It's ok. You should download USPL 2.5 and Rom ship 1.56.4xx. Fisrt you flash SPL by running blac_uspl , your SPL will be change to 1.15USPL, then you flash ship rom 1.56.4xxx, then everything will be ok. Give it a try
Note : It's more stable if you use Win XP.
from my experience with HTC Wizard and what you are describing it
sounds like
your battery is very close to dead
you need to find a way to recharge it
your phone is protecting it by shutting off
also i don't know how valid this is for the Blackstone
but the wizard would not charge in tri-color mode
(again for battery sake)
so make sure you have a nicely charged battery (buy a spare or a table charger)
and then try to flash something again
P.S. i don't know how one sentence cries for help peppered with EXCLAMATION points encourage anyone to help you
nguyenbathanh said:
It mean your phone stay at bootloader? tri-color sreen with SPL you can see. It's ok. You should download USPL 2.5 and Rom ship 1.56.4xx. Fisrt you flash SPL by running blac_uspl , your SPL will be change to 1.15USPL, then you flash ship rom 1.56.4xxx, then everything will be ok. Give it a try
Note : It's more stable if you use Win XP.
Click to expand...
Click to collapse
A clarification of the above post. When you have 3 colors (actually 4 with white color) and USB on the white band you have to start blac_uspl.exe. That will replace the original bootloader of your phone with cracked temporary bootloader named USPL. At this stage it shall no more give errors and you may flash it from the PC or from the memory card.
The suggestion for the battery also seems fair.
Mr. Nick said:
sir you don't understand.... how can i flash back to my original ROM if it turns off every 10 seconds when i turn the phone on......
and also.... if i press the button on top... nothing happens.... if i put the usb cable into the phone it will go into the tri- color screen
Click to expand...
Click to collapse
You have to copy the BLACIMG.nbh on the microSD using a USB card reader, not your phone. Then with the microSD on the phone, in the tri-color screen, it will automatically flash your ROM, if you don't have low battery of course.
If you want to use USPL to flash a coocked ROM (for your original official rom is not needed). Your phone have to stay at tri-color screen for more then 10s.
Perhaps your problem is a low battery as someone already suggested.
Do you have tried to remove battery and put it back, let the phone off and charge it with the wall charger?
lol i did have low battery... how unlucky am i... it would shut off every so often....
but i fixed!!!!
i took out the battery and synced it with the cable..... without a battery inside and it worked!!!
I love you guys!!!!
i am not lieing i was about to cry
wow
Mr. Nick said:
lol i did have low battery... how unlucky am i... it would shut off every so often....
but i fixed!!!!
i took out the battery and synced it with the cable..... without a battery inside and it worked!!!
I love you guys!!!!
i am not lieing i was about to cry
Click to expand...
Click to collapse
LoL
Dont stress so much next time. When your stressed out you dont think with a clear head. Glad it worked out for you.
The changing of ROM only seems can not brick your phone. Only unsuccessful changing of SPL can. Until SPL is OK you may ever flash new ROM.
tried to flash my TD2 to |T|6.5.1|ROM|WWE| ★ EnergyROM "Leo" 23081/21864 | Oct 28 | ★ Manila 2.5 ★ http://forum.xda-developers.com/showthread.php?t=562942
but after it was done it just stops at the touch diamond 2 logo i tried hard reset didnt work and i tried to flash with other ROMs but it just stays at 0 % dosnt go any further what can i do cant use it at all now.
i been running with custom ROMs before with no probs.
What spl version do u have?
Spl1.33.0000
you have made a mistake. you are not suppose to flash your phone without Hard spl. Do you know where your device is originally from? if you do go to the HTC website and download the stock rom.
step 2 download the rom that is for your phone.
step 3 put your device into tricolor mode (boot loader) if you dont know how then just hold the low volume botton and press power until your device enters the tri color mode.
step 4. once you are in the tricolor mode then plug in your data cable and wait until your computer recognizes it
step 5. run the original rom that you downloaded from htc.
now your device should be flashing the stock rom and after its done your device should be able to start.
your lucky that u didnt brick your phone.
if you have any other Q's let me know
I believe most of the newer roms require Hspl v1.83 to flash. Try that
danishnicooo said:
Spl1.33.0000
Click to expand...
Click to collapse
u need Hspl v1.83, then u'll be able to flash wm 6.5 rom; otherwise u'll get stuck at 18% everytime u try to flash it
somehow i change the HardSPLWrapper from 1.56.OliNex to 1.14.OliNex.
then my HD stoped working and its show me the "red,green,blue,white" screen with this MSG :
BLAC100 300
SPL-1.14.0000
MicroP-BlackStone (LED) v6
Upgreade ROM code error please try again.
Click to expand...
Click to collapse
if i connect the cable its show me USB.
when i try to update the ROM version or update the SPL to 1.56.OliNex. it show me the MSG in the attachment.
plz tell me what to do. this is the second day without my HD. + im in philippense those days i dont know where to fix it.
thanx
Hard reset.
Try some hard reset and then do flash again to higher hard spl 1.56.
Rom.
If the hard reset doesnt help flash with stock rom and do te hard spl again.
mcnaget said:
If the hard reset doesnt help flash with stock rom and do te hard spl again.
Click to expand...
Click to collapse
thnx for ur efforts.
but still the Hard reset doesnt help.
i tried to flash the stock rom, but same problem.
its give me a MSG : 00028002 not allow
yabdoo said:
thnx for ur efforts.
but still the Hard reset doesnt help.
i tried to flash the stock rom, but same problem.
its give me a MSG : 00028002 not allow
Click to expand...
Click to collapse
Not sure if it helps, but maybe you can try flashing stock ROM using USPL?
yabdoo said:
thnx for ur efforts.
but still the Hard reset doesnt help.
i tried to flash the stock rom, but same problem.
its give me a MSG : 00028002 not allow
Click to expand...
Click to collapse
yes try USPL 2.5
ill go through it with you
CaponiND + jigners
thank you.
i tried the USPL 2.5
but still it show me spl-1.14.
and after updating the ROM.
its stuck on the setup screen : tap the screen to setup your device.
+ something wrong with the screen color.
Boot.
Remove battery for some time,try to get in to boot loader from device not from windows,restart windows if there are any usb connections or processes in windows that prevent from flashing. Insert usb cable in different usb port. Try on a different pc.
the boot problem is finished. after i change the USB port.
i update to SPL-1.56, then i update the ROM.
but still its stuck on :
tap the screen to set up your windows phone.
when i tap the screen, the screen comes bright. but nothing change.
and its vabirate for a second. from time to time while its on the set up screen.
thanx mcnaget but still i need a help.
Battery.
Remove the battery for 24 hours and try again.
24 hours more
ok ill try, thnx alot.
Battery.
I have read in some post that this could help but if it is a hardware damage than none of this would help.
I wish you best of luck to bring him back to life.
Regards.
thanx
still stuck at set up screen.
i notice some thing when i update, usually it show me in the box :
verify that you want to update the ROM version :
from :
Image Version : "the previous ROM"
to :
Image Version : "the next ROM".
but now its show nothing on "From": Image Version.
just show mo the Image Version of "TO".
See the attached Pic.
Rom.
Have you try manualy to go to boot loader.If you already have olinex 1.56 try some different stock rom.
yabdoo said:
but now its show nothing on "From": Image Version.
just show mo the Image Version of "TO".
Click to expand...
Click to collapse
This is normal behavior when flashing from/to custom made ROMs, at least with USPL (never tried HSPL )
Hey XDA,
i have installed a ROM from here and i've got it deleted with task29 but what do i have to do now my Xperia X1 just stays on the sony ericsson logo and freezes there.
what do i have to do?
Flash a ROM, custom or stock....
You can search for the video tutorials made by Biovolt. Or if you allready know how to flash, then just put your phone in Bootloader mode and flash away!
thats the problem,how do i flash without a ROM on my phone?
(i just only can get in the tripple color screen)
1gangstabob2 said:
?
(i just only can get in the tripple color screen)
Click to expand...
Click to collapse
That's the solution just connect you x1 to computer with tripple color screen and flash a rom.
How do i flash a ROM then?
You wrote, that you've deleted your rom with task29. Do it on the same way, just replace the kovsimg.nbh file that's in the task29s folder with another one what you can find here on the site. just ownload one and put it there, most of them are in 7z zip or rar, so first unpack it and when you find a custom-ruu.nbh just rename it to kovsimg.nbh or maybe it's already named to kovsimg.nbh(energy roms). on the first time I renamed the zip file, and i didn't understand what's the problem.
My phone is just stuck on 0% and then Task29 shows update error 262 What do i have to do now?
noboy that knows the answer on this site?
1gangstabob2 said:
thats the problem,how do i flash without a ROM on my phone?
(i just only can get in the tripple color screen)
Click to expand...
Click to collapse
I think you got the answer. In the tripple color screen, when you connect your phone into the computer, it can be flashed..... just download a rom and flash.......
Sent from my MSM using XDA App
ted presley said:
I think you got the answer. In the tripple color screen, when you connect your phone into the computer, it can be flashed..... just download a rom and flash.......
Sent from my MSM using XDA App
Click to expand...
Click to collapse
Dude,my answer is how do i flash my ROM from my PC
1gangstabob2 said:
Dude,my answer is how do i flash my ROM from my PC
Click to expand...
Click to collapse
it is so simple...just take the battery out and put it in again,then push the volume bottom down and then push the power bottom.keep them pushed until the tri color screen appear & then connect it to pc and then run rom installer.it is easy bro.be sure you got my words.do you?any question?
you just need to have the rom installer & the rom image in the same folder.without any thing else.
manishabanzadeh said:
it is so simple...just take the battery out and put it in again,then push the volume bottom down and then push the power bottom.keep them pushed until the tri color screen appear & then connect it to pc and then run rom installer.it is easy bro.be sure you got my words.do you?any question?
you just need to have the rom installer & the rom image in the same folder.without any thing else.
Click to expand...
Click to collapse
look,i can flash a ROM by now but now the problem is my phone stays at 0% when i try to flash it
1gangstabob2 said:
look,i can flash a ROM by now but now the problem is my phone stays at 0% when i try to flash it
Click to expand...
Click to collapse
P.S. it just says ERROR 262 every time it fails
1gangstabob2 said:
P.S. it just says ERROR 262 every time it fails
Click to expand...
Click to collapse
how do you install ur rom?the rom you had on device,the usb metod or memory?and what was that rom?witch one?if the image is still on your memory take the card out and then again do task 29.can u do task 29 or there is the same error?
1gangstabob2 said:
P.S. it just says ERROR 262 every time it fails
Click to expand...
Click to collapse
did u do hspl before install rom?
abcdfx said:
did u do hspl before install rom?
Click to expand...
Click to collapse
with everything it just fails with task29,hard spl trying to flash a ROM just with anything it fails it just stays at 0% and then i have to remove the battery and go again to tri color screen or else i just have a grey background and 0%
1gangstabob2 said:
with everything it just fails with task29,hard spl trying to flash a ROM just with anything it fails it just stays at 0% and then i have to remove the battery and go again to tri color screen or else i just have a grey background and 0%
Click to expand...
Click to collapse
ok,yr device is not unlock.so you must install just your stock rom(witch ur device came with it).first take out memory and format in fat32 with a memory reader,then copy the rom image into memory(with the name KOVSIMG.nbh).take memory in & go to tri color in device and it must be installed.(be sure about your charge level)
I hope it works.
there was same problem for many others & this way worked.
Hopeless Task29..its a curse....
manishabanzadeh said:
ok,yr device is not unlock.so you must install just your stock rom(witch ur device came with it).first take out memory and format in fat32 with a memory reader,then copy the rom image into memory(with the name KOVSIMG.nbh).take memory in & go to tri color in device and it must be installed.(be sure about your charge level)
I hope it works.
there was same problem for many others & this way worked.
Click to expand...
Click to collapse
Dude thanks for answer but i always get 2 files from the stock ROM and they won't get in my SD card from winRAR and if i try a custom ROM it loads but its just stuck at loading... what do i have to do?