Hi,
I recently flashed upto WM6 Tofclock and everything was fine for a few weeks. Yesterday when I stuck the Himi on its cradle , it failed to sync and I noticed the PDA was stuck on its Tofclock WM6 splash screen.
I have tried to soft and hard reset and no matter what I do it jams at the same Tofclock splash screen.
Please advise what I should do ???
Hard reset your pda.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts
Related
sorry for my English
I have my XDA 2 upgrade to 6.1,but old data is available,i have currently 3 explorers,3 media players and so forth from old rom,i will a new Rom without old data,from old rom.
Ich habe restdateien vom vorrigen installationen ich will diese loswerden wie aber.
After upgrading your device you should always perform a hard reset. These are the instructions Ather90 wrote.
"Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts."
Procedure:
1.Download 1st firmware you want, i used this one "Treo750_2_23_ROW_EN_DesktopUpdater.exe" direct link http://download174.mediafire.com/b1c0ttuzd1tg/mdajuynnddz/treo750_2_23_row_en.rar
2. Extract the it using "7-zip" http://downloads.sourceforge.net/sevenzip/7z464.exe
3. Copy the extracted firmware "CHEEIMG_FW.nbh" put it in folder of
"RUUWrapper" , the one i selected is new bootloader
5. Put the phone in to Bootloader mode How?
Bootloader mode
1. turn phone on
2. press the MEDIA button AND at the same time with the stylus the RESET PIN
or remove and replace battery
the MEDIA button is the 3rd button on the left side of the phone, under the volume button
the RESET PIN is under the MINI SD card cover
1. keep holding the MEDIA button (left side of phone) untill you get the 3 color screen
6. Now you know what to do after this. "flash the phone"
7. after flashing Hard Reset the phone immediately how?
Hard reset
1. Press and hold the END (red power) key while pressing the pin reset button
2. Continue holding the power button until you see the "Erase all data" prompt
3. Push up on the 5-way to answer "yes" and wait until done
-------------
I successfully fix my customer phone with this procedure
phone problem:
"hang at the PALM splash screen with the grey indicator bar running 99% of the way at the bottom, then hanging"
B.R.
Lemor
hi i need help to do hard reset on my htc pure.
when i push 2 bottem + power its geting me to a screen that syed :"step 3 error while updating : file operate : File does not exist."
and it stuck !
can some one help me ?
is there any file that have to be in the sd card thet it looking for ?
please help
Make sure you do not have an .nbh file on your sd card
To perform a hard reset
1. With the device turned off, press and hold both the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
"This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel."
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
hi
i allready have done but still the same display i even toke out the SD card same display.
Are you on the stock ROM?
hi
what r u mean ? i try to hard reset but it couldnt activate it stop and i didnt got the display that u wrote .
zzozozo said:
what r u mean ? i try to hard reset but it couldnt activate it stop and i didnt got the display that u wrote .
Click to expand...
Click to collapse
i did what u wrote until stage 2 and i didnt got the display u wrot this is the display i got : "step 3 error while updating :
file operate : File does not exist."
and then it stuck !
Hello everybody.
i have updated my tablet and stuck now on the welcome screen page.
I have installed this version : ASUS MeMO Pad (ME572C)Software Image Version: V12.14.1.12 For WW SKU only* from this page http://www.asus.com/de/Tablets/ASUS_MeMO_Pad_7_ME572C/HelpDesk_Download/
i have fellowed this instruction here :
ME572c recovery
Today I did it : I changed a setting I shouldn't and my Memo became unusable (boot loop ?); even factory reset didn't do the trick...
So now I can make a How-to for recovery and rooting ;o)
Recovery (stock firmware) :
==> You'll need a MicroSD card on wich you have to put a file with you PC (or another device)
Prepare SD :
- Get update file from Asus (mine was UL-K007-WW-11.8.3.30-user.zip for 8.3.30 version and WW device)
- Copy file to FAT formatted MicroSD and rename it "MOFD_SDUPDATE.zip"
Go to droidboot mode :
- turn the K007 on with "Power" and "Volume UP" keys and keep'em pressed
- release "Power" when the screen turns on
- then release "Vol UP" a few second later when the Asus logo disappears
Flash :
- insert MicroSD into K007 slot
- Select "SD Download" using "Vol DOWN" key then confirm with "Power"
==> It will flash the device with the original Asus firmware and reboot to display the first launch wizard...
Not sent from my K007...
I found the instructions here: http://forum.xda-developers.com/memo-pad-7/general/me572c-root-debloat-t2992131
Now everytime i boot with power button + volume up i got this screen (picture one and two)
When i try to boot into recovery, the tablet always try to update the system. When an sd card is insert with FW V12.14.1.12 it install it, but nothing changed. When no sd card is insert, a failure come (picture 3)
Everytime after the fifth settings page ( the time settings picture 4) the app go back to first page (picture 5)
I can not get out off the welcome app. even sliding up from the bottom of the screen. Or slide from the top i see no bottoms and no settings
opps. sorry. bad suggestion and deleted
If you see picture 3, just hold power button and press volume-up button. Now you are into the recovery menu and you can do " wipe data/factory reset ".
I've changed the settings in the "factory settings" hidden menu.
Here was some "power" option in the "other" section. Power option default is "on" i was changed to "off" and reboot HU..
My HU cant' start, only buttons has got light. When i made hard reset - reset button + power button - HU go into recovery mode. In the recovery mode i can wipe / delete cache and data but HU still can't boot.
My HU: EONON GA2171S
HELP!
mikemat.pl said:
I've changed the settings in the "factory settings" hidden menu.
Here was some "power" option in the "other" section. Power option default is "on" i was changed to "off" and reboot HU..
My HU cant' start, only buttons has got light. When i made hard reset - reset button + power button - HU go into recovery mode. In the recovery mode i can wipe / delete cache and data but HU still can't boot.
My HU: EONON GA2171S
HELP!
Click to expand...
Click to collapse
I have found a solution.
Description below for anybody who got problem like me:
HU can't start, because in the config file there is mistaken option with power service turned off.
You need to find a MCU file (DMCU.IMG) and MCU CONFIG (DMCU.CFG) file and make an HU update in the recovery. mode.
Put these files on the SD card and flash MCU.
Link to the MCU CONFIG file:
https://forum.xda-developers.com/and...-mcus-t3624724
Link do the MCU file:
https://forum.xda-developers.com/and...essor-t3834657
REMEMBER - YOU MUST GET FILES TO YOUR HEAD UNIT - but you can try different, your HU is dead now anyway...