Related
hi everybody!
following some wiki updates like radio 1.12 and photocontacts/camera upgrade, i've lost the sms client on the mesage page!! throught , i can't receive or send a sms, mms ok and everityhing else semms to be ok. except thant i can't record movies for mms format or in mp4 anymore (only in avi)?? and the camera launch button shortcut on the left side isn't working anymore.
Where did i make the mistake?
is there a cab file to correct?
how can i re install the sms client?
thanks to all
regards!
Philippe
I faced the same problem after upgrading to Radio v1.12
I did a hard reset and re-install everything from scrach.
that means that there isn't other solutions?
can't help?
like a regfile or something like this?
plz!!
Just out of curiousity - did you get this problem after restoring from a Sprite Backup?
If you were using spritebackup just read this:
http://spritesoftware.crmdesk.com/a...search=Search&area=0&criteria=0&sort=0&page=1
If that doesn't work try this tool (cleanmail):
http://spritesoftware.crmdesk.com/image.aspx?mode=file&id=22
That will delete all the mail you have and rebuild your mailboxes.
If that doesn't work, just hard reset and reinstall everything.
Thank you all very much.
Ncruz , your tip was good and it works!! thank's again guys!
by the way , i've oputted back radio 1.10 instead of 1.12 , the battery was going too fast!!
I have a Tmo mda gen 3
task: upgrade rom to faria
So I wanted to try the new wm6 rom (faria) so I starting reading and reading here on XDA and other places for any and all information about the best way to do an upgrade, mind you I already upgraded to 2.24 so my mda is already unlocked and ready to get flashed.
So I did a backup with sprite, I didnt do a updatefile step which is suppose to make an upgrade file so when you do get the new rom on its suppose to help ,but anyways I got a backup.
I flashed the rom to my mda and I had it working, just like everyone said, it was faster, more toys and seemed to work!
Now I did a (selective) restore (only restoring needed stuff), well... sprite warned about rom versions ,but it restored my files including my registry.
low and behold EVERY one of my programs worked, GPS, google maps, etc
,but 2 issues I can not resolve.
timewizard.exe randomly pops up
voicecommand does not work
so it appears the only advice for the timewizard.exe was reflash , which I have done a few times in trying to get voicecommand working ,but the popup message seems to come back, mainly after a registry restore.
voice command is the bigger one, it appears when I restore the registry it blows away some voice command entries from the pre installed voice command 1.6 and then voicecmd.exe does not want to run.
So my question is I am sooooo close to being able to make a backup change roms and get EVERYTHING back WITHOUT reinstall of software I can taste it ,but I need some input!
anyone know some good registry tools / editing suggestions to backup the registry and restore it without killing voice command?
Jeff
Try flashing back and creating an upgrade file. I'd love to know whether it works ;-)
Thats what I did and it worked, however what I did first was
flash to the orginal rom, 2.24 xcel
I restored the sprite backup , however voice command didnt even work going back to orginal rom.
then I removed voice command 1.5 from installed programs.
cleaned up some file space only had 6 meg left on main storage.
then I create the updatefile and saved it to sd card.
finally did another complete backup
flashed to new rom and then did a restore and now voice command works, I will be doing some more testing ,but I think I got it.
if I would have had to install each program seperately that would have killed me!
jeff
well.. forget what I just said.... nothing works!
back to the drawing board......
all the files restored correctly ,but the registry did not restore when using the update mode AND the updatefile.
none of my programs appeared in the start menu and none of the registry entires were restored....
I'll try doing some manually restoreing and see what I get... maybe I missed something....
Jeff
well... I hope my ramblings help someone else!
so I think the key here was simpling removing voice command from the backup file and upon restore everything will work.
so in short, backup upgrade rom , restore works with sprite , but without using the updatefile mode as it seems it just ignores the windows folder and the registry , so whats the point?
I test some more and post my comments to help others who do not want to reinstall everything when they upgrade rom's.
If you get this to work, that would be great, but I think you are playing with a loaded gun trying to do this. Many things are very different between WM5 and WM6. Depending on the type of backup done and what all gets restored, I can see corruption of the registry, and things just not being put in the right place.
Well... so far ALL my apps are working, gps, google, opera, etc about the only thing now is I am getting a Notification
TimeWizard.exe could execuite.
I am hunting that one down in the reg right now.
any ideas?
jeff
Well ... to follow up my thread with my self and maybe help a few others.
the last issue I had after a rom upgrade and a restore was the dreaded timewizard.exe notification popup when you turn on the mda or come back from power save.
after hours/days of messaging around I found that in the "Task Manager" tool you can view Notifications and in there I found timewizard.exe listed a few times, I just assume it had this as a warning/notification and was simply "Notifing" me of a "past" problem. after I cleared it out of there the mda has not shown any more Can not execute TimeWizard.exe popups!
I hope this help anyone else with this issue.
Jeff
Hi Everyone,
Please help ...
My phone started acting strangely: no matter what sim card I put in it, it will not complete outgoing calls nor accept incoming calls. sending and recieving sms work though.
I have reloaded/upgraded the firmware ROM directly from i-mate's website but it didnt help.
I was woundering if maybe a virus could have caused this and by maybe re-installing the OS (Windows Mobile 5.0 I think) will fix this ?
Doesn't the firmware/ROM include the OS or is this seperate? If it is seperate, where can I find it?
I have looked on thie forum for similar posts but found nothing so any help is greatly appreciated!
Thanks alot,
Porac69
try with backup program on ur i-mate , it can work
Hi, noob here,
I recently added TofClock WM6.0 version to my Himalaya II, but I lost the functionality of the phone dialer, and the ability to make or recieve calls. I called myself from the home phone and nothing happened, then I instantly got a message saying I had a missed call. I then installed WM6.1 which is working fine, but still the dialer is no longer working? I cant click it in the start bar, I cant click the green call button on the device, I cant go into programs and open I am currently on:
WM6.1
Rome Version: 6.1.2a16CS
Radio Version: 1337.18
CE OS 5.2.19209
Build 19209.1.0.2
Is there something I can install to patch this problem?
Also is there a patch that will restore the functionality of the tasks and calender as I really need them, they stopped working after the first update from 2003, and I need it for Uni.
Sorry if this has been posted before but I really did search for ages on these forums before signing up to ask.
Any help would be brill.
Help!!! this is still a problem. I really like the Himalaya, but without it being able to function with a dialer or receive call, it is useless to me.
For me it seems like a hardware problem or a corrupted radio rom.
Did you try to flash back to your original WM2k3. I hope you made a backup.
Or try to flash the radio again, without changing the OS.
You can find them here:http://old.buzzdev.net/downloads.php?category=8
Good luck
Thankyou for your reply. I have downloaded the new radio. Can you send me a link on how to flash this file. Do I just add the software to the phone via active sync and then install it?
I am still new to this, and it seems to be unable to get Network service from my cell phone company.
I feel like the phone is bricked. *sigh*
As I remember, you flash the radio rom as if it is a compete rom, but I'm not sure, yet.
Look around, I read about it somewhere. Use search function here or at buzz.net.
Good luck.
If your device has got a bricked phone function and is not useable for you any longer don't through it away.
One of the rom cookers in this forum (master efsane from turkey) has ruined his device, and I try to organize one for him as I did for master Ather (former Ather90).
Maybe it is possible to get him back to our forum this way, because it seems not to be as easy to build good (german) WM6.5 rom.
As your device is able to receive sms, it sounds as an issue with the ringer. Does it show an incoming call?
HI!
I got xperia x1 and i puted my SIM card in it, but i tried to sended SMS but i cant.But i can receive them.I already made under settings so i can send MMS, but i can find SMS service center where to put that number from your mobile operator to put their number in it.I have TOUCH-IT 4.5 ROM on my x1. I checked a lot of forums where to go and that stuff but i cant anything of this.I went under messaging but nowhere to put that SMS service number.So anyone know where to on that ROM to put sms service center number?
thank you
sms center
press the call button and select menu+option select gsm/umts setting then select voicemail and text messages, then select get setting.. now u can change the number of ur operator sms provider.. after that select ok.. then reset yor device...
I was in that menu already but i have only: phone settings, pin code,change pin, change pin 2, fixed dialing,set up phone utilites. No gsm/umts
meebica said:
I was in that menu already but i have only: phone settings, pin code,change pin, change pin 2, fixed dialing,set up phone utilites. No gsm/umts
Click to expand...
Click to collapse
can u give me the link of your sofware rom... so ican download it and instalit on my x1.. the i can replay to you how to solf the problem...
and i suggest that u use 826x rom because its fast and stable.. http://www.826x.blogspot.com/
I tryed to instaled your ROM of link u gave me.I HARDspl first and than i ran customRUU it instaled reseted my x1 but i still have my old ROM on phone :S.
meebica said:
I tryed to instaled your ROM of link u gave me.I HARDspl first and than i ran customRUU it instaled reseted my x1 but i still have my old ROM on phone :S.
Click to expand...
Click to collapse
the hardspl was only to unlock the stock/original spl from sony ericson...
u must instal the rom.. this the link.. http://www.mediafire.com/?lladks97v2s62wv its about 116.68 MB.. and for clean flasing u must do task 29.. read in this link... http://826x.blogspot.com/2010/07/chefs-notes-updated-24072010.html
if you still have the problem just ask.. and i will try to answer...
how to change sms service center in 826x ROM
i attach the picture.. how to change the sms cervice center..