Related
warnning; does not work with g4 wizards!!!!!
this steps are to cid unlock and also to unlock sim in the folowing devices; qtek 9100, i-mate k-jam, mda vario, orange spv m3000, o2 xda mini s, dopod 838, Cingular 8125
first; you must make a full backup of you wizard before doing this , I personally use [wizBackup.exe] posted below for my backups and restores. This is not mandatory but could save an enormous amount of trouble.
I as most people with a wizard with the aku2 rom found out that it cannot be cid unlock with lokiwiz tool, you will get the following;{error:itwritedisk-an internal error occurred}.
. that is till now.
downgrade rom here http://dl.dropbox.com/u/7696581/htc%20wizard/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
note- this steps is for unlocking the cid of the wizard with aku2 rom.
how to cid. unlock all wizard variants ( that have the latest rom build )
first download custom__ruu_wizard_1050412_wwe_101_11210_wwe. rom from the ftp site from the above link, unpack it and just click the romupdateutility_wizard_noid.exe to start downgrading. Simply follow the prompts.
after the rom are loaded go thru the initial setup as you would with any rom.
now download the (lokiwiz02b) from here;
http://dl.dropbox.com/u/7696581/htc wizard/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Make sure you unzip lokiwiz to the root o the c: drive.
please copy the whole lokiwiz folder to the root of the drive,not the contentents of the folder!!!!!
and follow the instructions .do not forget to copy the cab file(enable rapi) to your device and run it before running lokiwiz.
Now run lockiwiz and unlock your machine, your machine will reboot itself. if yoy see an eroot while unlocking that says;
..............................................................................................................................................................................
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
this means that you device not been unloked......try again............
.................................................................................................................................................................................
That’s it your wizard is unlocked. Make sure yew keep the [lock_backup.bin] in a safe place you may need it for guaranty purposes.
Now flash the latest aku2 rom from your provider.- [very important,to avoid future problems wit rom updates]
then u can flash any rom you want.
question: if i cid unlock and sim unlock my phone (after installing custom 1.5 wwe rom) and then i install latest aku2 i-mate italian rom, will the sim unlock (and cid one too) be preserved?
Answer: i can confirm that that upgrading to the latest aku2 rom the wizard remains cid unlocked.
Special thanks to the author of the above cooked rom [button] also to machinagod for the lokiwiz tool and joninla for finding the downgrade rom, molski for is input and everyone that contributed to the cause.
do not try to downgrade using an older wizard rom other than the one posted above it will not work
also this {how to} is for the htc wizard only it may work with other devices but i don’t know, so if you turn you device into a brick do not blame me. use it at your own risk
if you device is from a operator like: 02, orange etc... You will void your guaranty unlocking cid, but don’t despair, if you keep the [lock_backup.bin] file that the lockiz tool generated you can restore cid to factory default.
this proccess only needs to be done once in the wizards lifetime.
Enjoy;
Jose faria.
donate if you like my work
Faria, can you tell me if this process will do it for the HTC Prophets with rom 2.x ???
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
maybe if you find an older rom for you device i only have a wizard.take a look at the lokiwiz tread i belive tha someone mentioned the HTC Prophets.
jamichy said:
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
Click to expand...
Click to collapse
Bet I will!!
For the record, your Jamin's rom is the same that was available to download some weeks ago with the Aku2??
jamichy said:
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
Click to expand...
Click to collapse
let me know how you get on.
onesolo said:
Faria, can you tell me if this process will do it for the HTC Prophets with rom 2.x ???
Click to expand...
Click to collapse
it may be possible,if you have an old custom rom for your device ,found this;
On the one hand, HTC Prophet is a complete copy (both software and hardware are meant) of HTC Wizard. On the other hand, it's equal to HTC Magician in appearance. That is why today review will be quite short, we will only discuss external elements and a new camera, all other aspects were highlighted in the review of HTC Wizard.
http://www.mobile-review.com/pda/review/htc-prophet-en.shtml
Hi Faria, thank you for your HowTo!
Now i know the wizard remains CID unlocked after the upgrade and that's good. I only hope that it stays SIM unlocked too.
Bye
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
sh*t forgot to post the address to the downgrade rom.here it ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
sorry guys
jamichy said:
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
Click to expand...
Click to collapse
yes u can, use this rom to downgrade
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
faria said:
jamichy said:
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
Click to expand...
Click to collapse
yes u can, use this rom to downgrade
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Click to expand...
Click to collapse
Hello, could you please tell me what is changed in the custom ROM???
I am willing to do the same thing for the prophet.
Thanks
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
faria said:
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
Click to expand...
Click to collapse
You mean to use the wizard rom on the prophet?
Won't that overwrite the bootloader with the one for the wizard???
andrew_sh said:
faria said:
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
Click to expand...
Click to collapse
You mean to use the wizard rom on the prophet?
Won't that overwrite the bootloader with the one for the wizard???
Click to expand...
Click to collapse
haaa you have the prophet
dont do that it may turn the prophet into a brick the only way is to find an old custom rom for your device. take a look at the ftp site it may have one there.
sorry
I told you Faria that it can be done
Great that it worked out okay, I can imagine how happy you are feeling right now
Nice how-to by the way.
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
siupiu said:
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
Click to expand...
Click to collapse
THATS IT.
siupiu said:
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
Click to expand...
Click to collapse
THATS IT.
good, really thx~~^_^
Hi, I need some help here as I cannot get WM6 on my Wizard.
My Wizard has a ROM version of 2.21.4.1 WWE and whenever I try to put WM6 on it, the updater program gives me error 300 and says it needs a new updater.
Now I have been looking around and i know I have to unlock the CID. The Sim is unlocked and I unlocked the CID using Lokiwiz 0.2. While doing this, i noticed it did give an error, but it did actually say it unlocked the CID and produced my backup and a unlocked CID BIN.
I tryed using the updater again and it gave me the same error (Error 300).
Can anyone advise me on what to do as I am completely lost...
Thanks
Shiraz
Shiraz said:
the updater program gives me error 300
Click to expand...
Click to collapse
Let me guess.... you got a G4 device. It can't be CID-unlocked through lokiwiz (don't believe it if it says it did CID-unlock). Look at the G4 thread on howto flash a CID-locked G4! Never flash IPL/SPL because you will brick you're device!
Shiraz said:
Hi, I need some help here as I cannot get WM6 on my Wizard.
My Wizard has a ROM version of 2.21.4.1 WWE and whenever I try to put WM6 on it, the updater program gives me error 300 and says it needs a new updater.
Now I have been looking around and i know I have to unlock the CID. The Sim is unlocked and I unlocked the CID using Lokiwiz 0.2. While doing this, i noticed it did give an error, but it did actually say it unlocked the CID and produced my backup and a unlocked CID BIN.
I tryed using the updater again and it gave me the same error (Error 300).
Can anyone advise me on what to do as I am completely lost...
Thanks
Shiraz
Click to expand...
Click to collapse
I got exacly the same problem how do you know of you have a 3g or a 4g version and whats the difrence?
You find all answers to your doubts by looking into G4 thread initially. After, you find another sticky thread related.
Just go for it!
good luck!
I have a Cingular 8125 and trying to cid unlock it to upgrade ROM on it but i followed the guide to a T and everytime i try to run the utility it comes back with an error saying i need to get an updated ROM utility. I just got this replaced by warranty exchange but the one i had i was able to cid unlock it and upgrsde roms with no problem.
I have windows xp and dont know what to do? Do i need to get another exchange or can anyone help please?
I have tried everything and re read thr guide but nothing works.
Thanks for your help
kingrut said:
I have a Cingular 8125 and trying to cid unlock it to upgrade ROM on it but i followed the guide to a T and everytime i try to run the utility it comes back with an error saying i need to get an updated ROM utility. I just got this replaced by warranty exchange but the one i had i was able to cid unlock it and upgrsde roms with no problem.
I have windows xp and dont know what to do? Do i need to get another exchange or can anyone help please?
I have tried everything and re read thr guide but nothing works.
Thanks for your help
Click to expand...
Click to collapse
try downloading the kitchen in my sig, and use the tool in the flashing folder.
Sorry, but I have to ask this... Is your phone a G3 or G4? You also aren't saying what you are trying to downgrade to. Is it teh Button ROM or something else?
The rom that is linked from Cingulars website to HTC's will not work on some versions of the G4 Wizards. Try using this RUU instead of the other RUU. Just replace the Rom update utility inside the folder you have put the nk.nbf file into.
Good luck!!
mfrazzz said:
Sorry, but I have to ask this... Is your phone a G3 or G4? You also aren't saying what you are trying to downgrade to. Is it teh Button ROM or something else?
Click to expand...
Click to collapse
yes it is a G3 and button's ROM is what I was trying to downgrade to bu tI will try the new upgrade utility and see if that helps or otherwise I will get a warranty exchange.
Thanks for all you guys help.
I have an i-mate k-Jam running Windows Mobile 5
I have tried a number of ROMS to upgrade to WM6/6.1
The upgrade appears to be successful and the inital screen suggest the upgrade has worked but the setup screens are still WM5 and after setup the device is still running WM 5.
As an example using the XM6r5Lite ROM shows a XDA 6 screen after hard boot but is still running WM5
Graham Wright said:
I have an i-mate k-Jam running Windows Mobile 5
I have tried a number of ROMS to upgrade to WM6/6.1
The upgrade appears to be successful and the inital screen suggest the upgrade has worked but the setup screens are still WM5 and after setup the device is still running WM 5.
As an example using the XM6r5Lite ROM shows a XDA 6 screen after hard boot but is still running WM5
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
I read the guide before attempting a ROM upgrade.
Its a G3 device that is unlocked.
None of the trouble shooting points in the guide seem to relate to the problem of the upgrade appearing successful but the device remaining as WM5rather than WM6.
Have I missed something
Graham Wright said:
I read the guide before attempting a ROM upgrade.
Its a G3 device that is unlocked.
None of the trouble shooting points in the guide seem to relate to the problem of the upgrade appearing successful but the device remaining as WM5rather than WM6.
Have I missed something
Click to expand...
Click to collapse
How did you check that the phone is CID unlocked? You realize there's a difference between SIM and CID unlocking
I am assuming it is CID unlocked as it was purchased SIM free directly rather than from a carrier
Graham Wright said:
I am assuming it is CID unlocked as it was purchased SIM free directly rather than from a carrier
Click to expand...
Click to collapse
Get WST and read the CID block to be sure if it's indeed as what's happening to it looks like CID blocked situation.
I was getting the same problem with a G4 XDA Mini S
i tried hardspl, softspl and then in the end i flashed it using the CID locked guide. I managed to get TNT WM 6.1 on it, but it wont work properly, the GSM info on bootup screen now doesnt show half the time when i boot the phone up, i have reflashed the original O2 rom and it seems to be working, although it wont connect to my wireless. Gonna have another play with it and see what i can find out, will update this thread if i find anything.
I am experiencing a similar problem. I have successfully downgraded the phone to the button rom, but every time I attempt to either flash a new rom or simply upgrade the ipl/spl, only the spl changes (ipl always remains at 1.01) and the new rom never takes.
I have used WST and tried the loki unlocker as well, but the phone just wont seem to flash with new roms.
I have flashed many wizards prior to this and have never run into this problem before.
Any suggestions?
Thanx.
stmasi said:
I am experiencing a similar problem. I have successfully downgraded the phone to the button rom, but every time I attempt to either flash a new rom or simply upgrade the ipl/spl, only the spl changes (ipl always remains at 1.01) and the new rom never takes.
I have used WST and tried the loki unlocker as well, but the phone just wont seem to flash with new roms.
I have flashed many wizards prior to this and have never run into this problem before.
Any suggestions?
Thanx.
Click to expand...
Click to collapse
Have you tried latest WST v4.2.2?
I added the possibility to CID unlock even if IPL/SPL values differ. Another member reported a success story with WST and a case like yours.
Yes, I have already tried WST 4.2.2 and it is reporting both CID and SIM is "already unlocked."
In addition, when I follow the steps outlined here [http://forum.xda-developers.com/showthread.php?t=310831], everything appears to work and all is synchronized until I get to the "install the t-mobile ship rom." When I try to flash that rom, I receive this error after the program puts the phone into bootloader mode...
ERROR [294] : INVALID VENDER ID
This Update Utility cannot be used for your PDA Phone. Please check your Update Utility.
Also, if I proceed further and attempt to flash the 3.08 ipl/spl, only the spl changes...the ipl remains at 1.01.
That message is clearly a sign of locked CID.
Have you tried to unlock CID anyway?
I have gone through the unlock stage is the Wiki instructions, then installed the T-Mobile WM5 ROM followed by the XM6r5Lite (WM6 not 6.1) ROM.
This time the device has taken the upgrade and initially appears to be working.
Thanks to everybody who replied to my initial post. -
- Graham
stmasi said:
Yes, I have already tried WST 4.2.2 and it is reporting both CID and SIM is "already unlocked."
In addition, when I follow the steps outlined here [http://forum.xda-developers.com/showthread.php?t=310831], everything appears to work and all is synchronized until I get to the "install the t-mobile ship rom." When I try to flash that rom, I receive this error after the program puts the phone into bootloader mode...
ERROR [294] : INVALID VENDER ID
This Update Utility cannot be used for your PDA Phone. Please check your Update Utility.
Also, if I proceed further and attempt to flash the 3.08 ipl/spl, only the spl changes...the ipl remains at 1.01.
Click to expand...
Click to collapse
However, I have also followed all the instructions, went ahead and performed the CID unlock (even though WST reported it was already done), but I'm still stuck at not being able to flash any rom above button.
Re-reading my post above, I just noticed the version of ipl/spl - 1.01. I had always thought the oldest version was 1.08? Perhaps that is a clue?
Any ideas?
Thanx.
stmasi said:
However, I have also followed all the instructions, went ahead and performed the CID unlock (even though WST reported it was already done), but I'm still stuck at not being able to flash any rom above button.
Re-reading my post above, I just noticed the version of ipl/spl - 1.01. I had always thought the oldest version was 1.08? Perhaps that is a clue?
Any ideas?
Thanx.
Click to expand...
Click to collapse
Sorry to ask again but have you CID unlocked with latest 4.2.2 WST? I added a new feature that has helped another member with locked SPL. And what bootloader values you have exactly?
Yes, I downloaded the latest WST (4.2.2) and even though it reported CID and SIM already unlocked, I went ahead and re-unlocked both with no errors being displayed and successful restarts after each. Currently, my boot screen shows this...
ipl 1.01
spl 1.01
gsm 1.12.10.0
os 1.5.4.2
Unfortunately, when I attempt to load any other rom, the wizard gets hosed...and yes, that is a perfectly acceptable technical term in this case.
Any help would be greatly appreciated.
Also, if it matters, here's the CID info as read by WST 4.2.2...
Reading CID block...
Calculating CID block sum...
CID checksum: C42E15AD
Decrypted stored sum: 6D00B85291C1F62B
Decrypted calcd sum: 6D00B85291C1F62B
Key index : 59 - Block index: 77
CIDkey: ########
CID IMEI: ###############
CID: 11111111 (SuperCID)
Phone is already CID unlocked!
Thanx again.
Anyone?
Anyone at all?
Deafened by the silence...
Okay, so I guess every single CID unlocker I've tried so far has actually failed, even though they stated they succeeded (and even WST reporting already unlocked). However, when I run the mtty MFC applicaton (r2sd all), it fails every time stating the device is actually NOT unlocked (which is why I'm not able to flash any other roms).
So, knowing that NONE of the CID unlocker programs (that I've found throughout the forums and the ftp) are working on my wizard, what can I do? Are there other CID unlocking programs that could actually "force" the unlock to actually work?
Thanx.
stmasi said:
Okay, so I guess every single CID unlocker I've tried so far has actually failed, even though they stated they succeeded (and even WST reporting already unlocked). However, when I run the mtty MFC applicaton (r2sd all), it fails every time stating the device is actually NOT unlocked (which is why I'm not able to flash any other roms).
So, knowing that NONE of the CID unlocker programs (that I've found throughout the forums and the ftp) are working on my wizard, what can I do? Are there other CID unlocking programs that could actually "force" the unlock to actually work?
Thanx.
Click to expand...
Click to collapse
Although,its a sign of CID not unlocked,but if you say,the WST tool reports it as CID unlocked. Which was the official rom on it when you downgraded.from your network sign,it appears you are on T-mobile network,so the official T-mobile shud flash and work on your phone.where did you downloaded the T-mobile Rom ? try to download from the T-mobile official site and check if it works or you can try wizard_love_Rom or xda_minis_launch.Its assumed you are flashing on winXP.
zabardast_1 said:
Although,its a sign of CID not unlocked,but if you say,the WST tool reports it as CID unlocked. Which was the official rom on it when you downgraded.from your network sign,it appears you are on T-mobile network,so the official T-mobile shud flash and work on your phone.where did you downloaded the T-mobile Rom ? try to download from the T-mobile official site and check if it works or you can try wizard_love_Rom or xda_minis_launch.Its assumed you are flashing on winXP.
Click to expand...
Click to collapse
Yes, using WinXP. Tried the love rom, but no go...same as the t-mobile rom. Only found the t-mobile rom on rapidshare...couldn't locate an "official" source for it. Every time I try to flash anything other than the button rom, during the initial boot, the gsm line is missing from the display where the ipl, spl, gsm, and os display normally appears. Then, as the device boots into windows mobile, all interactivity with the device lags...each keypress can take up to 30 seconds to respond. So, I reflash button and all works just fine again. Very strange indeed.
Thanx.
hello brothers..
its my first topic for me in this fourm
and i trust in ALLAH that i will get help from here
I have a K-jam
its spl and ipl were : 2.16
i tried to upgrade it.. and i used alot of roms
and after that i have a very big problem
which is
i installed Xda_MiniS_LaunchROM_v154102 Rom
and my
ths is
what i got
IPL 1.05
SPL 1.05
GSM 01.09.10
OS 1.5.4.2
when i insert my sim card it appears
Data Crashes.
Please contact your service center
i just want to back to my previous rom which is WM5 ARABIC
i tried to unlock my phone and sim by using Lokiwiz
and i did it and my phone restarted twice after using Lokiwiz as mentioned
but when i insert my sim card i also get
Data Crashes.
Please contact your service center
and when i try to install K-JAM_Arabic_2160901_21609102_20710_ship
some times i get :
ERROR [294]: INVALID VENDER ID
this update utility cant be used for your PDA.
Please Check yours Update Utility
and others :
UPDATE ERROR
my K-jam is G3? i'm using its slutions to unlock it!
please help me to fix it
i was using it in WM5 and there was no lock on sim card!!!!!!!!!
Thank you all
why not try to update with rom having no ipl/spl
dhawal4u said:
why not try to update with rom having no ipl/spl
Click to expand...
Click to collapse
sorry man i dont get ur point
Read the following method to recover back from 'Data Crash' state.
http://forum.xda-developers.com/showthread.php?t=307558