I had a problem with my upgrade... now i whant to do a downgrade.....or even try to reinstall but i can´t......
When i prepare to downgrade...... i press power+record+reset and apears SERIAL V2.06 .I put the qtek in the cradle but the "usb" is not there in the screen....... i try to downgrade or even reinstall wm5 but he cant comunicate.... the problem isn´t in the cradle because i boot to wm5 and he comunicates...
i think that some file in the rom is missing... in bootloader he dont comunicate by usb...
"6. Put your device into bootloader mode.
Press Power + record (above the volume slider) + softreset at the same time.
You should see a white screen with "Serial" text on it and the Bootloader version.
Put your device into the cradle
Make sure that the charger of your PDA is connected to the cradle.
The text should change to "USB" now. "------------------->>> this is not shown.....only Serial Apears....
Help please............... does any one knows how I could solve this?
is there any other way to install a rom? if i try to upgrade him on wm5 desktop I get this message: "Error 100:Model ID error" , if i try to downgrade in wm5 desktop i get this message
have you opened task manager and closed the following processes?
rapimgr.exe, outlook.exe, winword.exe, wcescomm.exe, wcesmgr.exe
if you still have problems read this http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade
mrcopyright said:
have you opened task manager and closed the following processes?
rapimgr.exe, outlook.exe, winword.exe, wcescomm.exe, wcesmgr.exe
if you still have problems read this http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade
Click to expand...
Click to collapse
Yes, i´ve closed all the processes....... i don´t see a solution........
Hi. When i started flashing rom to 317iTNYSTD - CE OS 5.2.20273 (Build 20273.1.3.3) WWE at 0% it throw error. now i have only 3color screen and on the last Color i have text "Serial" and when i put the usb cradle it is not USB. What i have to do please help me.
I have solved it. Close topic please
I tried unlocking it with 'HTC_Trinity_SIM_CID_Unlock_v1' and ran the ROMUpdateUtility.exe. But the process stopped at 7%, after that phone booted up and got stuck at the windows mobile green screen. After a few soft/hard resets phone boots upto operator logo but no further.
The tri color screen shows IPL-0.50 and SPL-1.07.0000
This is about all the info I have about this device.
Please help me revive this device. What do I do next?
Thanks
i have similar problem, but im stuck at screen alignment
Any way to revive this device, please
Please help, I promise another donation and a third star
I get the exact same problem.
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
have you try this one ? http://forum.xda-developers.com/attachment.php?attachmentid=43539&d=1184192788
IT WORKS...
Yes I tested it last night on my notebook but I did not know why, it did not work.
(Permission denied cannot conect to \\.\\WCEUSBSH001)
And I found that I forgot to DISABLE USB CONNECTION in Activ Sync.
Thank you.
For those In the same case as me, just after Windows Exploit, do not soft reset because the Olipro bootlaoder will disappear. Flash directly with your RUU.
Thanks XDA.
Hi, i would like to somebody helps me, i got my htc recently and i can't do it a hardspl i do all the steps and when it comes to almost finish gave an error i've tried with many different hardspl and nothing, i will show you the erros that gaves me... please help me with this problem, cause i can't do anything to my htc...
Hi
I have the some problem, I have follow this guide :
Step 2 - Upgrade to Hard SPL
Hard SPL will allow you to flash cooked ROMs without SuperCID’ing your device and also will protect your device from being bricked in a bad flash. If a bad flash occurs it should remain in bootloader, and you can re-flash another ROM.
Before you proceed, check which SPL is on your device. Manually enter the Bootloader by pressing the Power button, Camera button and performing a soft reset at the same time. If your SPL is 3.20.Olipro then you already have Hard-SPL on your device and can skip this step and proceed to upgrade your ROM or radio.
1. Download the Hard-SPL for P3600i (do NOT use any of the Hard-SPL's for Trinity/DoPod)
* Hard SPL 3.20.Olipro (P3600i HardSPL v1.1)
2. Unzip the Files, and click on ‘ROMUpdateUtility.exe’
Image Missing
3. Check the checkbox, and click ‘next’
Image Missing
4. Follow the directions in the window, and establish an activesync connection with your device
* Make sure the activesync icon is be green (finished synchronizing)
* Make sure your battery is charged
Image Missing
5. Check the checkbox, click ‘next’
Image Missing
6. In the next window, click the ‘Update’ button
This will show the version number of the ROM, radio, or in this case bootloader that you are about to flash.
Image Missing
7. After the version number has appeared, click next
Image Missing
8. In the following window, click ‘next’
after you click this, the flash will begin, so do not disconnect your device or do anything stupid on your computer
Image Missing
!NOTE! (quoted straight from Jon's post on first page)
WHEN FLASHING HARDSPL, IT WON'T WORK THE FIRST TIME - YOU WILL GET AN ERROR (CODE 260). THIS IS EXPECTED.
Quote:
Originally Posted by joncgde2
This is what happens.
You go to flash HardSPL like the guide says. LOOK AT THE SCREEN ON YOUR PHONE, YOU MIGHT HAVE SECURITY PERMISSIONS AND NEED TO MANUALLY ALLOW THE PROGRAMS TO RUN.
It looks like it's about to flash and then errors. BUT your phone is on the 3-colour bootloader screen! How odd. Well KEEP YOUR PHONE ON THE BOOTLOADER SCREEN, and unplug it from your computer. Exit the HardSPL program, RUN IT AGAIN, and FLASH THE PHONE AGAIN WITH HARDSPL (obviously connect your phone and stuff back to your PC).
The point here is this: the first time it will fail, but at least manage to get the bootloader up. With this bootloader up, exit the flashing program, restart it, and then you should be able to run the flashing program and have it complete.
DOUBLE CHECK YOUR PHONE HAS THE OLIPRO HARDSPL INSTALLED after completion, by soft-resetting (hold the power and camera buttons at the same time AND use the stylus to press the putton at the bottom of the phone. You might not get it the first time, but with practice you'll get the hang of it).
9. A Progress bar will appear on your computer screen, and your trinity will display a grey screen with progress bar. Be patient while your device is being updated.
Image Missing
Image Missing
10. Once your device is finished updating, it will automatically soft reset. Click the ‘Finish’ button to exit the RUU program.
Image Missing
To confirm is Hard-SPL is on your device, manually enter Bootloader by pressing the Power button, Camera button and performing a soft reset at the same time. If successful you will see the tri-colour screen and the following will be displayed
Hard SPL 3.20.Olipro (P3600i HardSPL v1.1)
but also after restart a lot of time HARDSPLromupdateutility.exe, I still have the same problem!
anybody may help me?
Now I have stratos image,
maybe is this the problem?
Hi
Pls I need help, I tried to upgrade my HTC P3600 then my computer crash so now every time I try to start my phone all what I got is a picture (HTC start mobility) and then nothing.
Pls help me.
Thanks
Hi gys, I think that this is my first post, but I want to share some solution for with you. The most important think with "connection" errors is to have HSPL installed correctly. I was trying to install on my HD2 universal ones, like Hard spl v7 and 9, but problems occured. So after trying everything, I found HSPL (on this forum) just for HD2. After that, everything wass like a charm
Hi,
my P3600 has a serious problem! I've flashed an Elegant Ed. (but I don't remeber the version). Now, I'd like to reinstall original ROM, but this is the results:
1) PC WIN VISTA: Activesync get ON, the PC see the PPC and the result is CONNECTED.
2) Incoming to update the PPC but the error IS 260 (communication error)
3) in the bootloader is indicated:
a) TRIN100 - IPL-0.50
b) TRIN100 - SPL-1.07.0000
c) serial
4) I downloaded [P3600i] HardSPL v1.1 and installs its on PPC and in bootloader there's (but error 260 continues to work )
a) TRIN100 - IPL-0.50
b) TRIN100 - SPL-3.10.Olimpo
c) PPC in bootloader config.
d) serial
5) Now, there's a SPL on my PCC !!! Connect and disconnect my USB cable by PPC, leaving PPC in bootloader configuration and by activesync disable "connect by USB"
6) insert usb cable in PPC, but it doesn't go to USB
..... I do not know what to do !!!!
Please help my
Junior
base167 said:
Hi,
my P3600 has a serious problem! I've flashed an Elegant Ed. (but I don't remeber the version). Now, I'd like to reinstall original ROM, but this is the results:
1) PC WIN VISTA: Activesync get ON, the PC see the PPC and the result is CONNECTED.
2) Incoming to update the PPC but the error IS 260 (communication error)
3) in the bootloader is indicated:
a) TRIN100 - IPL-0.50
b) TRIN100 - SPL-1.07.0000
c) serial
4) I downloaded [P3600i] HardSPL v1.1 and installs its on PPC and in bootloader there's (but error 260 continues to work )
a) TRIN100 - IPL-0.50
b) TRIN100 - SPL-3.10.Olimpo
c) PPC in bootloader config.
d) serial
5) Now, there's a SPL on my PCC !!! Connect and disconnect my USB cable by PPC, leaving PPC in bootloader configuration and by activesync disable "connect by USB"
6) insert usb cable in PPC, but it doesn't go to USB
..... I do not know what to do !!!!
Please help my
Junior
Click to expand...
Click to collapse
You have choice a wrong HardSPL !!!
Olipro 3.10 and 3.20 are for HTC P3600i and no working for TRINITY P3600.
So, now probabily you don't see "USB" on Bootloader when you connect you trinity on PPC.
Solution:
You must reload your H-SPL With SD CArd.
It's very simple:
searching for a Hard SPL for trinity device, example Olipro 1.20 and rename file "RUU_signed.nbh" ---> "TRINIMG.nbh".
Then copy file "TRINIMG.nbh" in a SD CARD and insert it on your Trinity; After that , make a Soft reset with stylus reset +power+camera.
Power bottom for update your Bootloader.
Now you would see your trinity working again
Davide
I was make restart for my PDA HTC Tytn II and it didnt open only i see The Starting Screen Windows Mobile version 6.1 and i was tray to upgrad the ROM the PC cant see the HTC ?
any one can help my ???
Have you flashed any HardSPL?
If the PC doesn't see the phone, maybe you have to enter the bootloader first before could upgade your ROM.
1. Hold power + camera + reset button to enter the boot loader.
2. You will see a tri color screen with "Serial" text at below and then connect your USB cable until the text changed into "USB"
3. Flash your preferred ROM by executing Custom RUU.exe on your PC.
Thanx
Thanks man.
With this solution i dont have to buy another, thanks to you.