Related
I have a generic Wizard that I upgraded using the T-Mobile update on thier website to flash it to 2.26. I have a T-Mobile SIM.
I flashed my T-Mobile MDA and it works fine. However when I did it to my non-branded Wizard (which is the Cingular form factor) it causes a curious problem. Everything appears to be working fine but for some reason in the background it continually is building log files in the root directory that over about a week causes it to have a low memory problem.
The files that are being generated are XPanelLog11.pco; XPanelLog2.1.pco; etc.
Also DbgToStorageLog1.txt; DBgToStorageLog2.txt; etc
I opened up one of these text files and it is has things like this;
PHP:
Windows CE Kernel for ARM (Thumb Enabled) Built on Oct 25 2005 at 17:27:50
ProcessorType=0926 Revision=3
sp_abt=ffff1000 sp_irq=ffff0800 sp_undef=ffffc800 OEMAddressTable = 8c101084
ModemUartPath from 0 to 0
+InitHtcHookUserDbgTrap
-InitHtcHookUserDbgTrap
Sp=ffffc7cc
CreateProcess(fbb4002,NK.EXE,8c100000)
LoadDLL(ffffffff,8fbb47e0,coredll.dll,03f60000)
LoadDLL(ffffffff,8fbb4524,osaxst0.dll,8c159000)
LoadDLL(ffffffff,8fbb42cc,hd.dll,8c155000)
HtcCeLog: Register logging functions with kernel success
CreateProcess(fba4c1e,filesys.exe,04000000)
LoadDLL(fba4c1e,8fbb47e0,coredll.dll,03f60000)
LoadDLL(ffffffff,8fba4f04,certmod.dll,03f50000)
LoadDLL(fba4c1e,8fba4f04,certmod.dll,03f50000)
LoadDLL(ffffffff,8fba7efc,fsdmgr.dll,03f30000)
LoadDLL(fba4c1e,8fba7efc,fsdmgr.dll,03f30000)
LoadDLL(ffffffff,8fb81ddc,trueffs.dll,03d80000)
LoadDLL(fba4c1e,8fb81ddc,trueffs.dll,03d80000)
MMMAP - gDrvGlobBase = 1c0000
Is there anyway for me to correct this? Do I need to reflash with something else or change a registry setting to get these log files to stop?
Hi Guys!
I've got a problem with iGO8...if i start the program the splash screen is shown...for about 2-3seconds, then a error Message is shown:
Fatal Error
------
Fatal error occurred in main thread.
Adress: 0x00204b00
Exception: 0x80000002
How can i fix this???
greetz
infernalshade
If you have installed a skin,that may be the problem.I had just thos problem when I tried to add a car icon to the Ultra skin 4.2-when I reinstalled the original skin it went OK
Ashley
no, its a fresh install...the newest release..(44366)
maybe there's a option for the sys.txt to get it to work?
Try to use a tweak to switch off "assisted GPS"... it worked with me after I switch assisted GPS off!!
i've downloaded kaisertweak...but assisted-gps was already disabled!
if i start iGO8.exe the blue buildings with the logo are shown. i can see "init api" on the bottom, and after this, the error-message appears!
i've read some other forums...a lot of people say, that this is a problem with the sdhc-card drivers! but i haven't installed those drivers...they're integrated in my HTC TyTN II ! so i cannot uninstall them...
her is my crash.txt:
Code:
------------------------------------------------------
------------------------------------------------------
------------------ Crash Log Begin -------------------
Current System time: "2008-08-11 10:07:50"
Build: 8.0.0.44366 Built @ Jun 24 2008 - 13:06:09
Memory Stats:
FreeMemory: 40 MB, 352 KB, 0 B
TotalUseableMemory: 46 MB, 504 KB, 0 B
MaxMemory: 68 MB, 0 KB, 0 B
ReservedMemory: 4 MB, 0 KB, 0 B
ActualCacheSize: 0 MB, 963 KB, 380 B
GarbageSize: 0 MB, 963 KB, 380 B
--------------------------------------------------------------------------
Process Name PID BaseAddr ParentPID PrioBase
--------------------------------------------------------------------------
iGO8.exe 0x24ffdd92 0x24000000 0x00000000 0x00000003
--------------------------------------------------------------------------
--------------------------------------------------
Modules Name BaseAddr BaseSize
--------------------------------------------------
shellres.dll.0407.mui 0x7ff40000 0x00032000
shellres.dll 0x7ff80000 0x0000f000
compime.dll 0x037f0000 0x00028000
commctrl.dll.0407.mui 0x7ff90000 0x00002000
commctrl.dll 0x0332f000 0x00068000
aygshell.dll 0x03889000 0x00054000
toolhelp.dll 0x0302e000 0x00004000
ossvcs.dll 0x03115000 0x00043000
oleaut32.dll 0x03158000 0x0002f000
coredll.dll.0407.mui 0x7ffe0000 0x00019000
ole32.dll 0x03187000 0x0002c000
coredll.dll 0x03f4c000 0x00096000
--------------------------------------------------
--------------------------------------------------------------
Threads TID BasePrio DeltaPrio
--------------------------------------------------------------
0x25a7849a 251 0
--------------------------------------------------------------
Exception: 0x80000002
At address: 0x00204b00
0x00204b00 (A)
WinCE CallStack snapshot (function names unknown - map file \Speicherkarte\iGO8\iGO8.map not found):
0x03f67cac (A)
0x244d203c (A)
0x244d1f58 (A)
0x244d1120 (A)
0x244d14c0 (A)
0x24016578 (A)
0x240182ac (A)
0x03f8a060 (A)
0x03f9049c (A)
0x80017100 (A)
0x800446ac (A)
0x8001b1f4 (A)
0x80017018 (A)
0x24204b00 (A)
0x241f9af0 (A)
0x241f70a4 (A)
0x243f292c (A)
0x243fa488 (A)
0x243f9390 (A)
0x240177c8 (A)
0x24018614 (A)
0x24018254 (A)
0x03f63304 (A)
0x0c02239c (A)
0x0c023538 (A)
0x0c01bd20 (A)
0x03f621a8 (A)
0x24019504 (A)
0x240160ac (A)
0x240164ec (A)
0x24514e08 (A)
0x03f692e4 (A)
Global status:
bInFocus: 1
bMouseDown: 0
bInLogic: 0
bInRender: 0
bInIdle: 0
bIn3DRender: 0
bIn3DRoadRender: 0
bIn3DShapeRender: 0
bIn3DLabelRender: 0
bIn3DPOIRender: 0
bIn3DDistRender: 0
n3DCam: (0, 0)
CurrentState[128] =
pos= (x=00000000, y=00000000, z=0, e=0)
State queue:
------------------- Crash Log End --------------------
------------------------------------------------------
------------------------------------------------------
Hi,
do you use W6.1?
in this case remove HTC Home in today page make soft reset and try to start Igo8
PS sorry for my poor english
jep im using wm 6.1!
the only today plugins im using are ultimatelaunch and batterystatus!
so it's mean when you turn on your HTC the HTC home page not appear?
unselect plugins soft reset and try to start igo8
the only thing that apears is the HTC startup-screen...the HTC home plugin is disabled! but it wont work (igo)
I get this error too
DIA2000 said:
Try to use a tweak to switch off "assisted GPS"... it worked with me after I switch assisted GPS off!!
Click to expand...
Click to collapse
Thank you very much. This was a poblem for me too.
Hi,no problem for me with wm6.1 on my kaiser and assisted-gps is enable. But i've bought the original version ...
try to start Igo without any maps installed, if it starts ok, put the maps back and be happy
you can also change sys.txt with
[debug]
disable_outlookpoi=1
The problem is that Igo is trying to find your contacts on the map, this either takes ages or Igo runs out of memory.
Is there a particular reason that you are asking on xda instead of contacting navngo? It just seems to me that you should look to them first.
urkje said:
try to start Igo without any maps installed, if it starts ok, put the maps back and be happy
you can also change sys.txt with
[debug]
disable_outlookpoi=1
The problem is that Igo is trying to find your contacts on the map, this either takes ages or Igo runs out of memory.
Click to expand...
Click to collapse
still not work, the same problems
zh.dayong said:
still not work, the same problems
Click to expand...
Click to collapse
About to try this - It was working fine on my elf, then suddenly stopped... after a cold boot, it works until I sync up my device - I added 1 new contact earlier this week, so it would make sense...
just cold rebooted...
IGO8 works.
Modifying the sys...
Synchronising contacts...
This is where it used to now fail...
WORKS!!!!!!!
Thanks!
Humble question
Sorry for asking, but what is cold reboot ?
I have HTC HD Blackstone, WM 6.1, using Spb Shell 3.5(theme), GJ6.10.1p_da_fullpack Skin
Unlike your problem my iGo 8.3.4 starts, but when in Simulate mode it runs for a few minutes, then stops with the errer message:
Fatal error occured in main thread.
Address: 0x03fa1acc
Exception: 0xc000005
I was trying to simulate a route, and it stops always in the same point of the route ?
Please help !
most people get this problem solved by looking at the forum thread on a very popular site for ppc phones just like this site..if u dont kno this very popular site u can pm me and ill give u the address but most people kno what it is..especially if u have igo8 newest version that came out Aug 19 8.3.4 version. u can find all the error questions and fixes on that forum for this specific version of igo8 that ive stated above. Most likely u need to delete ur save folder in igo8 and add a couple things to the sys.txt. so gl! i also suggest u type ur error plus igo8 right after it in google and the site im talkin about will prolly show up and ull figure it out all their..in case u dont get it this special site is not allowed here..but its urbbest chance in fixin ur error
Gentlemen
I am new here, in the past 1 week, I have read a lot documents here, thanks to you guys create such a wonderful forum and great articles, I also download a lot of file from here try to upgrade my XDA IIs to WM6, tried so many times on different version, but all failed.
Here is my XDA IIs info, hope someone here can give me a hint on what's the problem and how should I fix it... Thanks
Windows Mobile 2003 second edition, Version 4.21.1088 (Build 15045.2.6.0)
ROM Version: 1.40.00 WWE
ROM Date: 03/10/05
Radio version: 1.12.00
Protocol version: 1337.42
ExtROM version: 1.40.923 WWE
CPU: Intel PXA263, speed 400 MHz
RAM SIZE: 128MB
Flash size: 32MB
Flash chip type: 28F128K3
Data bus: 32 bits
Storage size: 43.26 MB
Thanks a lot
i have the same problem too..can anyone please help us out..wanted to upgrade from WM2003 to either WM5 or WM6 so i can put some of those iPhone theme on my phone..thanks in advance..(my phone details below)
?
thats messed up nobody responds cuz i was thinking about update myself but was worried i'll mess up major
window mobile 6.1 for xda lls
vfan3388 said:
Gentlemen
I am new here, in the past 1 week, I have read a lot documents here, thanks to you guys create such a wonderful forum and great articles, I also download a lot of file from here try to upgrade my XDA IIs to WM6, tried so many times on different version, but all failed.
Here is my XDA IIs info, hope someone here can give me a hint on what's the problem and how should I fix it... Thanks
Windows Mobile 2003 second edition, Version 4.21.1088 (Build 15045.2.6.0)
ROM Version: 1.40.00 WWE
ROM Date: 03/10/05
Radio version: 1.12.00
Protocol version: 1337.42
ExtROM version: 1.40.923 WWE
CPU: Intel PXA263, speed 400 MHz
RAM SIZE: 128MB
Flash size: 32MB
Flash chip type: 28F128K3
Data bus: 32 bits
Storage size: 43.26 MB
Thanks a lot
Click to expand...
Click to collapse
-------------------------------------------------------------
i already upgrade my xda lls to window mobile 6.1 and im very like this new roms..before this im planning to sale my xda.but since i use this new roms,i dont want to sale it anymore.thanks to master phoenix to pose the roms at him blog. You must have usb or cradle to do this.just follow the instruction there very2 carefully.
download here :
Go to http://pinoytopdownloads.blogspot.com
you can also go to this forum to see another review
http://www.gsmarena.com/o2_xda_iis-reviews-933.php
good luck
[email protected]
spyrgyro said:
i have the same problem too..can anyone please help us out..wanted to upgrade from WM2003 to either WM5 or WM6 so i can put some of those iPhone theme on my phone..thanks in advance..(my phone details below)
Click to expand...
Click to collapse
----------------------------------------------------------
i already upgrade my xda lls to window mobile 6.1 and im very like this new roms..before this im planning to sale my xda.but since i use this new roms,i dont want to sale it anymore.thanks to master phoenix to pose the roms at him blog. You must have usb or cradle to do this.just follow the instruction there very2 carefully.
download here :
Go to http://pinoytopdownloads.blogspot.com
you can also go to this forum to see another review
http://www.gsmarena.com/o2_xda_iis-reviews-933.php
good luck
[email protected]
I don't know if I toasted my XDA
I have an XDA IIs. The biggest problem I think that I made was to use Windows Mobile center since I am using a Windows Vista OS.
I was about to install the windows 6.1 from pinoytopdownloads when suddenly, it stopped and continuosly displayed Serial......version 2.07.
Did I toast my ROM or did it just become blank because Windows Mobile Center disconnects once the phone started changing it's OS?
I have not tried checking if activesync 3.7 on a Windows XP application can still recognize the O2 Xda IIs in that state.
If anyone can guide me or give help regarding this, I will greatly appreciate it. thanks.
try using XP with active sync 4.5 and start the process from the top, hard reset first your BA and put it in bootloader mode...that should work
Upgrading Blue Angel using Vista (without Mail Button)
Hy everyone,
Yesterday I had a bit of a struggle trying to upgrade my SPV M2000 (aka Blue Angel) but in the end it worked.
As you guys are having some trouble too, I'm going to post the way I did it and hope that it works for you as well..
Note I: This steps worked for me but there is no guarantee that they will do so for you too and everything you try is at your own risk. However I am sure, you are all aware of this and really hope that this is going to help you.
Note II: My Laptop runs Vista Business, my BA WM2003 non-SE. I modified the installation process as the mail button on my BA is not working anymore, preventing me from following the normal instructions found in the wiki.
First of all (Prerequisites):
- Ensure Windows Mobile Device Center (WMDC) is installed and updated to the most recent version. The latest version is 6.1 which worked fine for me.
- Get the drivers for the BA, to be found in the wiki
- Get MTTY 1.4.2, attached to this post
- Get the ROM you want to install, I used Sun Dream's WM6.1 which can be found in the wiki as well
Now, to the task:
To begin with we can follow the instructions given in the wiki for ugrading to wm6 using vista, so I'll just copy&paste those steps from there:
4. Put your device into Bootloader mode by pressing and hold the "Power" & "Record" buttons, and then press the Reset Button.
5. Connect the phone to the sync cable/cradle USB. (Now you can see "USB" at the top of your display and numbers (2.06 or 2.07 at the bottom) You may need to remove SD/MMC (memory) card
6. Now navigate into the WMDC (Start -> All Programs -> Windows Mobile Device Center)
* Click on the "connection settings" menu icon
* In the connection settings menu uncheck "allow USB connections" then press OK.
* Now exit the WMDC and return to the desktop
7. Go into the start menu and type "Services", this will take you into the local services dialogue and show a list of all services either running or registered with your pc.
* Scroll down the list and make sure these services are present:
* Windows Mobile-based connectivity
* Windows Mobile 2003-based connectivity
* If these services are not started then double click each one and set them to Automatic start by clicking the "startup-type" drop-down menu and selecting automatic then click the start button in the same window, apply the setting by pressing OK.
* Return back to the desktop again
8. Go into the start menu and type "Device Manager" then run, this will take you into the device manager.
* Click the "+" symbol next to "Mobile Devices" and double click on "HTC USB Sync". (Note: In my case this was labelled "Microsoft USB Sync")
* This will bring up the properties of the currently connected device.
* Go to the "Driver" tab and click "Update Driver".
* Click "Browse My Computer for Driver Software".
* Select "Let me pick from a list...."
* Click the "Have Disk" button.
* Click "Browse" and navigate to the AS_DRIVERS folder we created earlier.
* Now select your file
o Vista 32bit users select the file "wceusbsh.inf"
o Vista 64bit users select the file "wceusbshx64.inf"
* Then click Open.
* Click next and the driver will be installed (wait a moment).
* Press close and escape back to the desktop now.
Click to expand...
Click to collapse
Next Steps, different from those described in the wiki:
9. Go to the task manager and kill the wmdc.exe process
10. Run MTTY; select the USB option from the dropdown list
- There is also a USB button but the instructions I found said NOT to use it, so I did not test it
- Apparently, the option could also be called something like WCEUSBSH001, but always has to contain USB. In my case it just said USB
- If you do not get a USB option something is not connected correctly, ie it will not work with the stock drivers Vista uses
crabiorc said:
(Leave default parameters: 8 bits / Flow Control NONE / Stop bits 1 / Parity None / Local Echo No)
Click OK
Run following commands:
- [press enter first to get USB> prompt]
USB>
- Type "set 14 0" without the quotes to tell bootloader to boot the OS after reset. (then hit Enter)
USB>set 14 0
HTCST ÚÈHTCEUSB>
- Type "task 28" to get your device formatted (hit Enter and wait for a little)
USB>task 28
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
- Type "task 0" to ask your device reboot (hit Enter)
USB>task 0
USB>
Click to expand...
Click to collapse
Next Steps:
11. Take the phone off the cradle. I am not absloutely sure anymore, but I think it still was in bootloader mode at that point. If that is the case just soft reset the device.
- When the device has rebooted it will ask you whether to flash some settings (can't remember which..) about 3 times. Just answer no to all of them.
12. Restart WMDC and re-allow USB connections (under connection settings)
13. Reconnect your device to the cradle and start Active Sync on the Blue Angel
- Make sure your device is shown as "connected" in WMDC
14. Start the ROM installation.
Note: Using "BaUpgradeUT.exe" resulted in a Device ID error. In this case you have to use a version which does not check the ID codes. I used the version attached to this post
15. When the installation is finished, the dialogue on the computer says to cold boot (hard reset) the device.
- If your mail button is not working, just soft reset the device (what I did)
- If your mail button is working you may attempt this. (Please report back!)
I have not yet gotten through really testing the device and I never had a WM6.1 device before, thus no basis for comparison. From the first impressions the soft-reset at the end did not cause any problems and everything seems to be working fine.
16. You're done
Whew, this has gotten rather long. If this instructions work for you, please let me know!
As there seem to be several BAs out there where the mail button doesn't work this might be a useful addition to the wiki.
However, I will not post it there without some feedback whether it works for others as well..
(I hope there aren't to many mistakes in the text; I am not a native speaker)
Final Note:
This is not my work, all the steps described above were found on this forum and on the wiki pages. I just did the job of combining them in a way that worked for me.
My biggest thanks to:
- crabiorc
- ramram
- sp3dev
- all the people who contributed to the wiki pages
Best wishes,
Dipak
is it ok downgrade from wm6.5 to wm6.1?
blueangelkoe said:
is it ok downgrade from wm6.5 to wm6.1?
Click to expand...
Click to collapse
Yes. If you feel more comfortable on a specific ROM it is always ok to downgrade or upgrade.
Upgrade XDA IIs to WM6.5
My XDA IIs just froze when resetted earlier and it was running on WM6.1 so I started to wonder if it had totally died. As I mainly leave it in the car and use it for satnav I was considering now buying a tomtom.
Then thought if its dead trying to revive it cant hurt so I found the following link (http://pinoytopdownloads.blogspot.com) to download a zipped file claiming to be WM6.5.
Opened the file and did a hard reset on devicethen sync with PC. Ran the programe which looked farmiliar from previous updates I had used so thought it might work. Half hour later, my XDA IIs came back to life running WM6.5 and none of my data such as text and contacts were lost at all.
It lives again.
Waiting for the HTC Touch Pro2 to see if it lives up to its hype and then can use my PDA as a phone again too cos lets face it... the XDA IIs is a bit of a lump now!
http://pinoytopdownloads.blogspot.com
Nice to hear that your BA is kicking again
Billy B said:
My XDA IIs just froze when resetted earlier and it was running on WM6.1 so I started to wonder if it had totally died. As I mainly leave it in the car and use it for satnav I was considering now buying a tomtom.
Then thought if its dead trying to revive it cant hurt so I found the following link (http://pinoytopdownloads.blogspot.com) to download a zipped file claiming to be WM6.5.
Opened the file and did a hard reset on devicethen sync with PC. Ran the programe which looked farmiliar from previous updates I had used so thought it might work. Half hour later, my XDA IIs came back to life running WM6.5 and none of my data such as text and contacts were lost at all.
It lives again.
Waiting for the HTC Touch Pro2 to see if it lives up to its hype and then can use my PDA as a phone again too cos lets face it... the XDA IIs is a bit of a lump now!
http://pinoytopdownloads.blogspot.com
Click to expand...
Click to collapse
Billy B:
I just bought an 02 XDA IIs. I love it but the bluetooth doesn't work with my Motorola S9 stereo headset unless it's 6 inches from my head. Does your XDA IIs work with stereo bluetooth? Have you tried it with WM6.1? I'd like to know.
Upgrading to WM6.1, Etc.
For all you upgrading Blue Angels to WM6 and high, you need to read the Wiki http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel. Read Blue Angel for beginners and also the upgrading to WM5 and WM6. You'll learn that you can free up some memory being used for the Extended ROM among other things.
I am new here, and this is my first rom flash. I have an O2 XDA lls that was given to me by a friend on WM2003. On XP, following the instructions on the wiki, I have tried with several roms. The flash seems to work, but then as soon as I reset the phone I am back in WM2003. Instead of a striped boot screen, I simply see an O2 logo, and when using the key combinations, I get no debug options.
Anyone have any ideas?
well did you flash a proper rom or maybe just a radio rom, meaning just an upgrade on wireless tech, because that process would "feel" like flashing a rom but actually doesn't change the OS
I don't really know. But I used the roms on this page:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4
if that helps. I also used one off the helmi_c to check it wasn't a dodgy rom. DO you have any specific one to recommend? When I downloaded and unziped the rar, I simply ran the upgrade file within which started a wizard which said it would upgrade my pda. Strangely, the wizard did not display any information about the pda on the screen which tells you the rom info. Is it possible that it is not being detected? Do I need to install some extra drivers on XP?
it is perfectly normal that this upgrade tool does not show all the information like an official upgrade would, first of all, that is because these are cooked roms, meaning you only upgrade the OS, not the protocol, radio and extrom. that would be baked roms. but anyway, also, that the device's current information is not fully shown or not shown at all is normal, as you are probably using the MAupgradeut_noID.exe in contrast to the original BAupgradeut.exe, just by the first two letters (and the giant picture in the wizard) you can tell that this upgrade tool is actually for the magician, but works best for BA.
for recommendation:
http://forum.xda-developers.com/showthread.php?t=482997
the R6.1 release on that site is the newest real release, meaning you can get full further support, the download links work...
Don't get fooled by the R6.1, we are still talking about wm6.5, it is just the xplode release number.
P.S. no extra drivers needed, just use the wiki wizard word by word and it will work
The same thing happens again. Using the ROM upgrade file, it all seemed to work, and then when I attempt to do a hard reset, I get no stripes, just an O2 logo, and no boot options. I am then returned to Wm2003. Maybe I will try on another computer.
it's nice, but there is some application lost.
i've upgrade my xda 2s to WM6 cooked by HELMI, i download from http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista and look powerfull, its nice, but there is some application lost that i need. there is'nt auto config and xBackup...some one can help me to get that application??....thank's.....
Hello...
First of all I want to thank all the People, who work on the fantastic roms available in this forum...
Maybe somebody already had the same problem and can help me...
I have installed Windows 7 X64 and set up the Windows Mobile Device Center to connect and sync my Xperia X1 with Outlook 2007.
The connection is working perfectly, I've got access to the memory of my x1 and also the Multimedia-Features of WMDC are useable... But the synchronisation doesn't work... or only partly...
When I choose something in the synchronisation, which is taken from Outlook there appears an error message... When I disable the checkboxes Contacts, Mails, Tasks, ... then the sync works...
I have turned on the debug mode in WMDC and this is what the logfiles tell...
Code:
wmdc Information: 8 : Engine.OnLoaded - ActiveSync in Windows-PC 2
DateTime=2009-09-16T11:16:20.8320161Z
wmdc Information: 0 : SyncController.Run - RaiseSyncStarted
DateTime=2009-09-16T11:16:20.8320161Z
wmdc Verbose: 0 : SyncController.RaiseSyncStarted Count:1
DateTime=2009-09-16T11:16:20.8320161Z
wmdc Information: 8 : WindowsMobileDevice2005.OnSyncStarted - Posting OnBegin notification
DateTime=2009-09-16T11:16:20.8320161Z
wmdc Information: 8 : WindowsMobileDevice.PostNotification - Davids X1i.OnBegin to Davids X1i
DateTime=2009-09-16T11:16:20.8320161Z
wmdc Information: 0 : SyncController.Run - AirSyncDesktop.BeginSync
DateTime=2009-09-16T11:16:20.8476162Z
wmdc Information: 0 : Request start sync AirSyncDesktop
DateTime=2009-09-16T11:16:20.8476162Z
wmdc Information: 8 : WindowsMobileDevice.OnNotification.OnBegin - from Davids X1i
DateTime=2009-09-16T11:16:20.8632162Z
wmdc Information: 8 : SyncController2005.OnNotify - AirSyncStatusListener sent device OnBegin notification, count 1
DateTime=2009-09-16T11:16:21.6744176Z
wmdc Verbose: 0 : SyncController.RaiseSyncStarted Count:2
DateTime=2009-09-16T11:16:21.6744176Z
wmdc Information: 8 : [Windows-PC 2] Engine b9217127-3cb7-427b-8605-4962e901e52f OnItemsOutOfDate
DateTime=2009-09-16T11:16:22.1892185Z
wmdc Information: 0 : SyncQueue.Enqueue - Item ActiveSync already in queue not enqueing
DateTime=2009-09-16T11:16:22.1892185Z
wmdc Information: 8 : Engine.OnBegin - AirSyncDesktop in Windows-PC 2
DateTime=2009-09-16T11:16:22.4076189Z
wmdc Information: 8 : WindowsMobileDevice.PostNotification - AirSyncDesktop.OnBegin to Windows-PC 2
DateTime=2009-09-16T11:16:22.4232189Z
wmdc Information: 8 : DataSource.OnNotification - from AirSyncDesktop, OnBegin
DateTime=2009-09-16T11:16:22.4232189Z
wmdc Information: 8 : Engine.OnError in AirSyncDesktop in Windows-PC 2 - HRESULT:80004005 - Achtung%Die Synchronisierung konnte nicht abgeschlossen werden. Wenn das Problem weiterhin besteht, löschen Sie Synchronisierungspartnerschaften, und stellen Sie sie erneut her.
DateTime=2009-09-16T11:16:26.2452256Z
wmdc Information: 8 : WindowsMobileDevice.PostNotification - AirSyncDesktop.OnError to Windows-PC 2
DateTime=2009-09-16T11:16:26.2608256Z
wmdc Information: 8 : WindowsMobileDevice.PostNotification - Windows-PC 2.OnError to Davids X1i
DateTime=2009-09-16T11:16:26.2608256Z
wmdc Information: 0 : Toast::OnError (-2147467259, Achtung - Die Synchronisierung konnte nicht abgeschlossen werden. Wenn das Problem weiterhin besteht, löschen Sie Synchronisierungspartnerschaften, und stellen Sie sie erneut her.)
DateTime=2009-09-16T11:16:26.2608256Z
wmdc Information: 8 : Engine.OnEnd - AirSyncDesktop in Windows-PC 2
DateTime=2009-09-16T11:16:26.8068266Z
wmdc Information: 8 : WindowsMobileDevice.PostNotification - AirSyncDesktop.OnEnd to Windows-PC 2
DateTime=2009-09-16T11:16:26.8068266Z
wmdc Information: 8 : DataSource.OnNotification - from AirSyncDesktop, OnEnd
DateTime=2009-09-16T11:16:26.8068266Z
wmdc Information: 0 : SyncController.Run - AirSyncDesktop.EndSync
My second problem is the thing with Windows SideShow, the little, undiscoverable feature, which should connect my Phone with my PC even closer... (control Media Player, Media Center, ...)
I already connected my phone to the WMDC over Bluetooth and installed the SideShow cab for Windows Mobile on my phone... but when I start it and press connect, there is a notification, that the connection failed and I shall ensure that my Phone is already paired with the PC... but as I wrote above it's even connected to the WMDC... Anybody who knows how to activate, or install Windows SideShow??
In the end I have to excuse my english, I'm a german guy
Thanks a lot for the answers in advance,
greets LichtiMC
tried to disable ur firewall?
I had the same situation as u do.....
win 7 professional X64
win 7 installed everything correctly......i can access my sd card, my phone memory....but just couldn't sync
but once I remove my firewall software (agnitum outpost in my case)
it works automatically.....
check your event viewer and see what error u get.
Just tried...
I've just tried to sync with firewall disabled... same result...
I've read, that this is probably caused by the outlook.pst file... I already executed scanpst.exe until there weren't any errors anymore... So... may you or somebody else has another advice for me...?
LichtiMC said:
I've just tried to sync with firewall disabled... same result...
I've read, that this is probably caused by the outlook.pst file... I already executed scanpst.exe until there weren't any errors anymore... So... may you or somebody else has another advice for me...?
Click to expand...
Click to collapse
Edit: Is it possible that there are missing some rights for WMDC to connect to the Contacts, Mails, Tasks, ... I found out, that the problem is still there, if I create a new outlook.pst file...
Pls sbdy help... =)
(Sorry for the douple post... pressed the false Button...)
Problem solved...
OK, now I know, that the ActiveSync problem is a bug of the X10 Roms and will be corrected soon...
Now I'd like to know, if smdy of you already played around with Windows SideShow... As long as I search, I just can't find it in Windows 7...
Edit: Found out, that in Windows 7 SideShow only appears if you are already paired over Bluetooth with your device... also you have to choose SideShow at the Blutooth Services for your device... (In my case this wasn't possible, because the SideShow Universal Driver for Bluetooth wasn't installed and Windows Update didn't find it... so I installed it manually and then the connection worked...=)
I heard Windows Sideshow does not work with Windows 7... did you really get it to work with Windows Mobile?
can i have the link of windows 7 u installed?
~~~ Problem ~~~
On my Windows 8.1 x64 machine I was finding that when running any of the following HTC RUU (ROM Update Utility) apps for my Sprint HTC One M7_WLS they would start then disappear after accepting the terms:
RUU_M7_WL_L50_SENSE60_SPCS_MR_Sprint_WWE_6.23.651.6_Radio_1.01.20.1225_CNV_CNV_SPCS_4.38_003_release_425282_signed_2.exe (my version - file name matches my phone status exactly)
RUU_M7_WL_L50_SENSE60_SPCS_MR_Sprint_WWE_6.23.651.10.exe (newest version)
~~~ Short answer ~~~
check Windows Event Logs (run eventvwr.exe & go to Windows Logs -> Application) to confirm error type (SideBySide, Dependent Assembly Microsoft.VC90, x86)
install "Visual C++ Redistributatble Package (x86)" package from Microsoft (I'm too new to post URLs so try something like microsoft.com/en-us/download/details.aspx?id=29)
try RUU again
~~~ Long answer ~~~
In both cases:
the app would start (sucking up a bunch of disk IO)
the "RUU - InstallShield Wizard" window would eventually show (agonizingly slowly advancing the progress bar)
upon clicking the "accept the terms" option and clicking the Next button, the app would end with no further message (but as far as I can tell the C:\Users\<my user name>\AppData\Local\Temp\{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}\ folder has been cleaned up)
I tried various fixes suggested by other sites including "Compatibility mode" changes, running as administrator, even disabling driver protection! (That reminds me, I should turn that back on.)
In the end I finally worked on this when it wasn't in the wee hours of the morning and realized that if something was crashing, it should be leaving an Event Log entry.
So, in looking at the Application Events log I found a SideBySide "Dependent Assembly Microsoft.VC90" error on architecture "x86" for version "9.0.21022.8" when running ARUWizard.exe (which must be what InstallShield called after unpacking all the files).
A quick web search for "VC90" told me I was missing a Visual C++ 2008 library and the "x86" architecture told me I needed the x86 (32 bit) version of the library even though (or perhaps BECUASE) I'm running on a 64 bit OS.
Microsoft kindly provided that library for me in their downloads at microsoft.com/en-us/download/details.aspx?id=29 (wow - id=29...how old IS this library?!?).
After installing "Visual C++ 2008 Redistributable Package (x86)" [yes, x86 even though I'm on x64 OS] I WAS able to run the RUU exe past the "accept terms" screen - I didn't even need to reboot!
In the end I was able to succesfully unbrick AND update my phone to the 6.23.651.10 firmware giving me the latest (to-date) version including the "Stagefright" patch AND network improvements.
I have no idea why in this 64 bit world HTC would put out an updater expecting to find a 32 bit library, but hey - at least they provide an awesome tool for those of us idiotic enough to brick our own awesome devices!
Hopefully this helps others who are running into the same issue I did - good luck!
This is great! I had this issue and couldn't figure it out. You win one Internet for today.
Do you mind if I include this information in my RUU guide? I've already submitted it to be included in the FAQ.
coal686 said:
This is great! I had this issue and couldn't figure it out. You win one Internet for today.
Do you mind if I include this information in my RUU guide? I've already submitted it to be included in the FAQ.
Click to expand...
Click to collapse
@coal686 - feel free to include this (in whole or part) wherever you think it will do the most good. Thanks for thinking it's worth repeating!
Thank You
you saved my phone lol
I relocked my bootloader and was like oh crap i forgot the other steps
TheKookieGuy said:
you saved my phone lol
I relocked my bootloader and was like oh crap i forgot the other steps
Click to expand...
Click to collapse
Glad it helped!
[Wow - I didn't realize I've had my HTC One for 2 years now. ]