Related
warnning; does not work with g4 wizards!!!!!
this steps are to cid unlock and also to unlock sim in the folowing devices; qtek 9100, i-mate k-jam, mda vario, orange spv m3000, o2 xda mini s, dopod 838, Cingular 8125
first; you must make a full backup of you wizard before doing this , I personally use [wizBackup.exe] posted below for my backups and restores. This is not mandatory but could save an enormous amount of trouble.
I as most people with a wizard with the aku2 rom found out that it cannot be cid unlock with lokiwiz tool, you will get the following;{error:itwritedisk-an internal error occurred}.
. that is till now.
downgrade rom here http://dl.dropbox.com/u/7696581/htc%20wizard/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
note- this steps is for unlocking the cid of the wizard with aku2 rom.
how to cid. unlock all wizard variants ( that have the latest rom build )
first download custom__ruu_wizard_1050412_wwe_101_11210_wwe. rom from the ftp site from the above link, unpack it and just click the romupdateutility_wizard_noid.exe to start downgrading. Simply follow the prompts.
after the rom are loaded go thru the initial setup as you would with any rom.
now download the (lokiwiz02b) from here;
http://dl.dropbox.com/u/7696581/htc wizard/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Make sure you unzip lokiwiz to the root o the c: drive.
please copy the whole lokiwiz folder to the root of the drive,not the contentents of the folder!!!!!
and follow the instructions .do not forget to copy the cab file(enable rapi) to your device and run it before running lokiwiz.
Now run lockiwiz and unlock your machine, your machine will reboot itself. if yoy see an eroot while unlocking that says;
..............................................................................................................................................................................
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
this means that you device not been unloked......try again............
.................................................................................................................................................................................
That’s it your wizard is unlocked. Make sure yew keep the [lock_backup.bin] in a safe place you may need it for guaranty purposes.
Now flash the latest aku2 rom from your provider.- [very important,to avoid future problems wit rom updates]
then u can flash any rom you want.
question: if i cid unlock and sim unlock my phone (after installing custom 1.5 wwe rom) and then i install latest aku2 i-mate italian rom, will the sim unlock (and cid one too) be preserved?
Answer: i can confirm that that upgrading to the latest aku2 rom the wizard remains cid unlocked.
Special thanks to the author of the above cooked rom [button] also to machinagod for the lokiwiz tool and joninla for finding the downgrade rom, molski for is input and everyone that contributed to the cause.
do not try to downgrade using an older wizard rom other than the one posted above it will not work
also this {how to} is for the htc wizard only it may work with other devices but i don’t know, so if you turn you device into a brick do not blame me. use it at your own risk
if you device is from a operator like: 02, orange etc... You will void your guaranty unlocking cid, but don’t despair, if you keep the [lock_backup.bin] file that the lockiz tool generated you can restore cid to factory default.
this proccess only needs to be done once in the wizards lifetime.
Enjoy;
Jose faria.
donate if you like my work
Faria, can you tell me if this process will do it for the HTC Prophets with rom 2.x ???
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
maybe if you find an older rom for you device i only have a wizard.take a look at the lokiwiz tread i belive tha someone mentioned the HTC Prophets.
jamichy said:
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
Click to expand...
Click to collapse
Bet I will!!
For the record, your Jamin's rom is the same that was available to download some weeks ago with the Aku2??
jamichy said:
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
Click to expand...
Click to collapse
let me know how you get on.
onesolo said:
Faria, can you tell me if this process will do it for the HTC Prophets with rom 2.x ???
Click to expand...
Click to collapse
it may be possible,if you have an old custom rom for your device ,found this;
On the one hand, HTC Prophet is a complete copy (both software and hardware are meant) of HTC Wizard. On the other hand, it's equal to HTC Magician in appearance. That is why today review will be quite short, we will only discuss external elements and a new camera, all other aspects were highlighted in the review of HTC Wizard.
http://www.mobile-review.com/pda/review/htc-prophet-en.shtml
Hi Faria, thank you for your HowTo!
Now i know the wizard remains CID unlocked after the upgrade and that's good. I only hope that it stays SIM unlocked too.
Bye
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
sh*t forgot to post the address to the downgrade rom.here it ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
sorry guys
jamichy said:
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
Click to expand...
Click to collapse
yes u can, use this rom to downgrade
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
faria said:
jamichy said:
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
Click to expand...
Click to collapse
yes u can, use this rom to downgrade
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Click to expand...
Click to collapse
Hello, could you please tell me what is changed in the custom ROM???
I am willing to do the same thing for the prophet.
Thanks
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
faria said:
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
Click to expand...
Click to collapse
You mean to use the wizard rom on the prophet?
Won't that overwrite the bootloader with the one for the wizard???
andrew_sh said:
faria said:
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
Click to expand...
Click to collapse
You mean to use the wizard rom on the prophet?
Won't that overwrite the bootloader with the one for the wizard???
Click to expand...
Click to collapse
haaa you have the prophet
dont do that it may turn the prophet into a brick the only way is to find an old custom rom for your device. take a look at the ftp site it may have one there.
sorry
I told you Faria that it can be done
Great that it worked out okay, I can imagine how happy you are feeling right now
Nice how-to by the way.
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
siupiu said:
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
Click to expand...
Click to collapse
THATS IT.
siupiu said:
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
Click to expand...
Click to collapse
THATS IT.
good, really thx~~^_^
Please whats the best solution to making the wizard with G4 chip cid unlock ?
is it by going to http://www.imei-check.co.uk/m3000unlock.php or
something else?
thank you very much in advance to those who know or can help
Re: final solution to cid unlock wizard g4 chip spl/ipl *.00
moyofalaye said:
Please whats the best solution to making the wizard with G4 chip cid unlock ?
is it by going to http://www.imei-check.co.uk/m3000unlock.php or
something else?
thank you very much in advance to those who know or can help
Click to expand...
Click to collapse
hy
Search the forum for "lokiwiz " (sorry, i dont have the thread) v. 2b should be able to unlock the CID. There is also version 3 available but i guess any will do.
You have to be logged in to be able to download it.
Good luck
Re: final solution to cid unlock wizard g4 chip spl/ipl *.00
Nextasy said:
moyofalaye said:
Please whats the best solution to making the wizard with G4 chip cid unlock ?
is it by going to http://www.imei-check.co.uk/m3000unlock.php or
something else?
thank you very much in advance to those who know or can help
Click to expand...
Click to collapse
hy
Search the forum for "lokiwiz " (sorry, i dont have the thread) v. 2b should be able to unlock the CID. There is also version 3 available but i guess any will do.
You have to be logged in to be able to download it.
Good luck
Click to expand...
Click to collapse
thank you very much. I have gone through if not all the threads about upgrading. I noticed that people who had the G4 chip had problems upgrading . and some people have also said that you cant unlock the cid of the G4 (spl/ipl with .001 at the end).
I am looking for how to acheive the unlocking of the cid, hence i will be able to do upgrades and downgrades as i wish.
I think http://www.imei-check.co.uk/m3000unlock.php is good & cheaper for cid unlock, as compare to other method. The JAxxx method will cost you around EURO 85 to buy the dongle & 1 unlock credit & you have to wait for the dongle to arrive.
If you just want flashing PDA into other language on G4 PDA, you can use update_utility_no_id , no need cid unlock. Search this xda-developers.com forum for the tool.
Even after CID unlock, Downgrade a g4 rom to a g3 rom, from my experience, the radio will not run properly. A G4 PDA can only use a G4 rom. A G3 PDA can use a G4 rom , because the G4 shipped rom has 2 IPL & SPL, will fit both e.g. 2.21 IPL & 2.21.0001 IPL
Currently you are right - A G4 rom cannot be unlocked free via any software available on this site. If you truly want to unlock you're phone, you're going to have to pay.
That noted, you will always have to make sure that the ROM you're flashing will not replace your bootloader (which is a safe way to go anyway) or flash with a newer bootloader than what you have (which is the IPL/SPL 2.x). Do not ever go backwards (1.x bootloaders) because you will brick your device.
The only saving grace you can give an attempt to is the lokiwizMSL03a or lokiwiz03a programs by machinagod. I cannot confirm if these have or have not worked with a G4 chipset wizard.
Safe bet currently for G4 wizard owners - pay to get the thing unlocked; you won't brick your device.
mengesb said:
Currently you are right - A G4 rom cannot be unlocked free via any software available on this site. If you truly want to unlock you're phone, you're going to have to pay.
That noted, you will always have to make sure that the ROM you're flashing will not replace your bootloader (which is a safe way to go anyway) or flash with a newer bootloader than what you have (which is the IPL/SPL 2.x). Do not ever go backwards (1.x bootloaders) because you will brick your device.
The only saving grace you can give an attempt to is the lokiwizMSL03a or lokiwiz03a programs by machinagod. I cannot confirm if these have or have not worked with a G4 chipset wizard.
Safe bet currently for G4 wizard owners - pay to get the thing unlocked; you won't brick your device.
Click to expand...
Click to collapse
Ok so if i was to use the http://www.imei-check.co.uk/m3000unlock.php to cid unlock the g4 wizard, i wont need to worry about what rom im flashing, i wont need to worry about the spl/ipl ? So basically your saying all the flexibility of the G3 will be available for the G4 ?
Thanks again to everyone.
moyofalaye said:
Ok so if i was to use the http://www.imei-check.co.uk/m3000unlock.php to cid unlock the g4 wizard, i wont need to worry about what rom im flashing, i wont need to worry about the spl/ipl ? So basically your saying all the flexibility of the G3 will be available for the G4 ?
Click to expand...
Click to collapse
Wrong.....
The Custom "Cooked" Roms on this site only contain the IPL/SPL for G3 as that is the most common chip.
Also 1.x Roms have no G4 bootloaders.
Even CID unlocked you will be limited to "Official" Roms or "Cooked" Roms either missing Bootloader or specifically with G4 Bootloader.
kyphur said:
moyofalaye said:
Ok so if i was to use the http://www.imei-check.co.uk/m3000unlock.php to cid unlock the g4 wizard, i wont need to worry about what rom im flashing, i wont need to worry about the spl/ipl ? So basically your saying all the flexibility of the G3 will be available for the G4 ?
Click to expand...
Click to collapse
Wrong.....
The Custom "Cooked" Roms on this site only contain the IPL/SPL for G3 as that is the most common chip.
Also 1.x Roms have no G4 bootloaders.
Even CID unlocked you will be limited to "Official" Roms or "Cooked" Roms either missing Bootloader or specifically with G4 Bootloader.
Click to expand...
Click to collapse
thanks that clears up alot of questions, one more thing i need to know, cause i have started working on the wiki. the G4 and the G3 versions, are they limited only to the tmobile vario or all types of wizards. ?
moyofalaye said:
thanks that clears up alot of questions, one more thing i need to know, cause i have started working on the wiki. the G4 and the G3 versions, are they limited only to the tmobile vario or all types of wizards. ?
Click to expand...
Click to collapse
It can be any descendant of the Wizard from what I hear, either a model 100 or 200, be it a Cingular 8125, or a T-Mobile MDA. Always check your SPLs before flashing. The phone you save just may be your own.
mengesb said:
Safe bet currently for G4 wizard owners - pay to get the thing unlocked; you won't brick your device.
Click to expand...
Click to collapse
Why pay for something you can have: free, better, safer???
Don't CID unlock your device, it's a waste of time and money. The best solution is, IMHO, to remove the IPL/SPL parts from the ROM you want to install: it'll take you only 2 minutes! This solution is also better than CID unlocking in three aspects:
- It's free. No need to comment on this
- It's better: in a CID unlocked G4 phone, you cannot install the home-made ROMs you find in this forum (like summitter's ones or MrClean). If you cook your own ROM, on the contrary, you can install whichever 2.x ROM you like
- It's safer: if you correctly remove the IPL and SPL parts from the ROM you want to install, the event of a major damage (bricking) is highly unlikely. Even if your PC crashes or there's a power outage in the middle of the upgrade you will still be able to boot your device and to repeat the upgrade!
To remove IPL/SPL from a ROM of your choice, you can follow this tutorial i wrote: http://forum.xda-developers.com/viewtopic.php?t=56088
Bye
Cool. It is exactly that, what I wont know !!
So Can I cook my own ROM for G4 and G3 device (I have Extension ROM and Splash screen). It is be sufficient translate the ROM in "nb2nbf_tornado.exe"?
For example aku 3.2 Os and my own Extended ROM and Splash Screen.
Johnnnnnnnnnny said:
Cool. It is exactly that, what I wont know !!
So Can I cook my own ROM for G4 and G3 device (I have Extension ROM and Splash screen). It is be sufficient translate the ROM in "nb2nbf_tornado.exe"?
For example aku 3.2 Os and my own Extended ROM and Splash Screen.
Click to expand...
Click to collapse
Yes!
Cool 2: :lol:
So I will make that ROM when I will have my device again. Perhaps I will share it if will work done
Need I the file enterbootloader.exe if I dont want to flash IPL/SPL ?
Johnnnnnnnnnny said:
Cool 2: :lol:
So I will make that ROM when I will have my device again. Perhaps I will share it if will work done
Need I the file enterbootloader.exe if I dont want to flash IPL/SPL ?
Click to expand...
Click to collapse
You need all the files in the RUU archive. Just follow the tutorial i told you about. bye
Also: CAN YOU PLS CHANGE THE TITLE OF THIS THREAD??? IT SEEMS THAT YOU HAVE A WORKING SOLUTION BUT ACTUALLY IT IS THE OPPOSITE: YOU'RE LOOKING FOR IT. ADD A "?" IN THE TITLE!
I am using Summiters old 2.26 ROM, and have to send back in the phone, so I want to flash it to the HTC Rom from the HTC site, but just wondered if that would have issues or not.
My IPL SPL is 2.24 and the HTC ROM is dated newer then mine.
Think I will run into problems?
You could always flash the original rom with the noid RUU if you run into anything. Just place the nk.nbf in the same directory. And might I suggest that you CID-relock your phone prior to sending it to a service center as that procedure usually voids the warranty.
Wao
Good info thanks, although I will admit to being a noob at this so should I re-lock the device, then run the htc rom?
Your advice on the nk.nbf is strictly based on the HTC rom not loading?
Regarding the relock, where can I find a relock tool? I remember ages ago downloading and running an app called lockwiz, is that right?
Brese said:
Good info thanks, although I will admit to being a noob at this so should I re-lock the device, then run the htc rom?
Your advice on the nk.nbf is strictly based on the HTC rom not loading?
Regarding the relock, where can I find a relock tool? I remember ages ago downloading and running an app called lockwiz, is that right?
Click to expand...
Click to collapse
yeah, lokiwiz does the unlocking but if you didn't save the output file I don't know how you are going to re-lock. Doubt they will even check that as long as you have a stock rom on the device though, so you should be ok.
So Then...
The original thought should suffice, using the stock ROM from the HTC should load ok.
I am kinda in the same boat. I need to send my 8125 in for repair. I currently have Molski's ROM. I tried to go back to the ROM for my phone from Cingular and I am getting an error 296 Upgrade only. I have tried both Cingular ROM and get the same error.
Would the nk.nbf file pretain to me? If so where do I find it and how do I use it?
Sorry - I am a noobie to flashing the ROM's so any help would be greatly appreciated.
ORIG STOCK Cingular ROM
I believe this is one of the Original Shipped ROM from Cingular.
ftp://xda:[email protected]/Wizard/Roms/Cingular/Cingular_RUU_1.8.11.1.WWE.ship.exe
PrinceJ said:
I believe this is one of the Original Shipped ROM from Cingular.
ftp://xda:[email protected]/Wizard/Roms/Cingular/Cingular_RUU_1.8.11.1.WWE.ship.exe
Click to expand...
Click to collapse
I am getting the same error when I try to install this version also.
weathersinc said:
I am kinda in the same boat. I need to send my 8125 in for repair. I currently have Molski's ROM. I tried to go back to the ROM for my phone from Cingular and I am getting an error 296 Upgrade only. I have tried both Cingular ROM and get the same error.
Would the nk.nbf file pretain to me? If so where do I find it and how do I use it?
Sorry - I am a noobie to flashing the ROM's so any help would be greatly appreciated.
Click to expand...
Click to collapse
The exact error I am getting is:
ERROR [296]: UPGRADE ONLY
This NBF file cannot be used for your PDA phone. Please get newer NBF file.
What is the NBF file and how do I get and use it?
The answer sir...
is addressed by the link in my signature...
Dr Puttingham said:
is addressed by the link in my signature...
Click to expand...
Click to collapse
I tried that before I posted. I get the same error afterwards.
I finally got the old Cingular ROM installed but cannot go to the new ROM.
I broke down and contacted HTC. Basically they told me to do a warranty replacement.
Thanks for everyone's help.
Heloo brothers....
I just want to know is there any SPL downrgrading techniqe avilable?
my pda's specification are as follows
ipl 3.08
spl 3.08
gsm 02.19.11
os 2.21.2.6
I am unable to install wm6 nor T -mobile's orginall ruu working is there any way to install 1m6 on my machine...i am new user so i need help plzzzzz.
I want kno the same thing.
Is there a tool to downgrade just the SPL/IPL alone without changing anything else or still downgrading the OS ROM is the only way?
freeyayo50 said:
I want kno the same thing.
Is there a tool to downgrade just the SPL/IPL alone without changing anything else or still downgrading the OS ROM is the only way?
Click to expand...
Click to collapse
there are several tools that will end up by giving you what you want but you must build the RUU yourself.
HOW:
Get an RUU with the IPL/SPL version you want (be carefull with the G3/G4 difference!!!!)
Extract the nk.nbf from the updater and then extract the chunks (you can use my tool or typho5.exe)
Get nb2nbf_tornado.exe and make your own nk.nbf with IPL/SPL only
Pack it again inside an RUU updater and use it to flash
That's it
cheers
PS:
Use the search to feature to learn about "nb2nbf_tornado.exe"
mestrini said:
there are several tools that will end up by giving you what you want but you must build the RUU yourself.
HOW:
Get an RUU with the IPL/SPL version you want (be carefull with the G3/G4 difference!!!!)
Extract the nk.nbf from the updater and then extract the chunks (you can use my tool or typho5.exe)
Get nb2nbf_tornado.exe and make your own nk.nbf with IPL/SPL only
Pack it again inside an RUU updater and use it to flash
That's it
cheers
PS:
Use the search to feature to learn about "nb2nbf_tornado.exe"
Click to expand...
Click to collapse
Or you could flash the lowest T-mobile rom you can find, it should put you back to 1.08 or something like that!!! When i have to downgrade i always get these!!! Then you just upgrade your OS again to what you want and there you go!
I have a HTC Wizard G3. Can I use Button Wizard ROM's SPL/IPL?
I used nb2nbf_wizard.exe to make what's in the attached picture. Does it look correct?
Also, I have nb2nbf_tornado.exe & nb2nbf_wizard.exe...are they the same thing. There both v2.02.
It looks fine to me. post results after, plz
...and check my signature tx
mestrini said:
It looks fine to me. post results after, plz
...and check my signature tx
Click to expand...
Click to collapse
Great!! I deff will.
When using your Wizard Service Tool, if i do Read ROM-->SPL...will this also read the IPL as well??
I want to know so I can just do a Write ROM---->SPL to restore both after I downgrade to SPL/IPL 1.xx.
freeyayo50 said:
Great!! I deff will.
When using your Wizard Service Tool, if i do Read ROM-->SPL...will this also read the IPL as well??
I want to know so I can just do a Write ROM---->SPL to restore both after I downgrade to SPL/IPL 1.xx.
Click to expand...
Click to collapse
nope. IPL is not readable via RAPI/TRUEFFS tools like my tool, only via boot loader and SD card i guess...
mestrini said:
nope. IPL is not readable via RAPI/TRUEFFS tools like my tool, only via boot loader and SD card i guess...
Click to expand...
Click to collapse
Oh ok. Then how would i make a backup of my SPL/IPL. I looked at aWizard, but it doesn't support it.
freeyayo50 said:
Oh ok. Then how would i make a backup of my SPL/IPL. I looked at aWizard, but it doesn't support it.
Click to expand...
Click to collapse
no it doesn't. aWizard is based on same apps as my tool; in fact aWizard is where i got my inspiration from (thanks ahlok_hk )
as i told before, only using mtty and boot loader commands to make a full backup to the SD card, but for that the phone must be CID unlocked
But IPL/SPL are generic so you just grab a RUU updater with same IPL/SPL as yours and you'll have your backup
I extracted these from a OEM Cingular ROM. What are the differences between both sets of SPL/IPL's??
When restoring my SPL/IPL, which set should i use?
Okay, this is where you got to be careful since a pair is for G3 (IPL_1) and the other is for G4 (IPL_2). You don't see it in 1.x ROMs since there were no G4 devices then
cheers
mestrini said:
Okay, this is where you got to be careful since a pair is for G3 (IPL_1) and the other is for G4 (IPL_2). You don't see it in 1.x ROMs since there were no G4 devices then
cheers
Click to expand...
Click to collapse
Wow, thanks for letting me know. I'll make sure to use the IPL_1 for my restore.
I have a Cingular 8125 and trying to cid unlock it to upgrade ROM on it but i followed the guide to a T and everytime i try to run the utility it comes back with an error saying i need to get an updated ROM utility. I just got this replaced by warranty exchange but the one i had i was able to cid unlock it and upgrsde roms with no problem.
I have windows xp and dont know what to do? Do i need to get another exchange or can anyone help please?
I have tried everything and re read thr guide but nothing works.
Thanks for your help
kingrut said:
I have a Cingular 8125 and trying to cid unlock it to upgrade ROM on it but i followed the guide to a T and everytime i try to run the utility it comes back with an error saying i need to get an updated ROM utility. I just got this replaced by warranty exchange but the one i had i was able to cid unlock it and upgrsde roms with no problem.
I have windows xp and dont know what to do? Do i need to get another exchange or can anyone help please?
I have tried everything and re read thr guide but nothing works.
Thanks for your help
Click to expand...
Click to collapse
try downloading the kitchen in my sig, and use the tool in the flashing folder.
Sorry, but I have to ask this... Is your phone a G3 or G4? You also aren't saying what you are trying to downgrade to. Is it teh Button ROM or something else?
The rom that is linked from Cingulars website to HTC's will not work on some versions of the G4 Wizards. Try using this RUU instead of the other RUU. Just replace the Rom update utility inside the folder you have put the nk.nbf file into.
Good luck!!
mfrazzz said:
Sorry, but I have to ask this... Is your phone a G3 or G4? You also aren't saying what you are trying to downgrade to. Is it teh Button ROM or something else?
Click to expand...
Click to collapse
yes it is a G3 and button's ROM is what I was trying to downgrade to bu tI will try the new upgrade utility and see if that helps or otherwise I will get a warranty exchange.
Thanks for all you guys help.