Hello,
I have this rom : RUU_Trinity_LVSW_WWE_1.25.0.8_GPS (AKU 3.5.2)
from http://forum.xda-developers.com/showthread.php?t=302198
I wanted to test the new WM6 roms, unfortunately, my trin doesn't update with any rom I tried (Orange, HTC, LVSW Wm6, Mun_Rus Wm6, ...)
It tells me : "ERROR 262 : UPDATE ERROR
... communication error during the process"
I'm stuck on LVSW Wm5 rom :'(
Not sure if Des SPPL is causing this problem... anyway, I tried to update it from Bootloader or synched, on XP and Vista, 5 differents roms... no luck.
I would really appreciate some help, thanks
can you list the steps of what happened, in order?
also, just to make sure i understand, have you already tried to manually enter the bootloader and THEN run the RUU? *edit* one last question, have you tried this.. after the error, leave your device connected and in bootloader, then restart the RUU.. can you give me your device details too?
Well, when I run the update with normal step (connect AS, then launch update...) when the update is ready to be started (progress bar appears), phone have to switch to bootloader, which it does. However, it seems that the RUU is waiting for that since it return me this error:
ERROR 246 : Device not responding
And I have to exit. I don't understand ?
Progress bar didn't even appear on the phone.
At this time boot loader shows
IPL-SSPL by Des
SPL-1.07.ds
So since I'm already in Bootloader mode, i try to launch RUU again. Here is the error I get when the progress bar appears on both phone and PC :
ERROR 262 : Update Error
And it offer me to recover the device, which I don't need as the current rom has been left untouched and is still functionning after the error.
Then I reset the device to enter bootloader this time:
IPL-0.50
SPL-1.06.0000
same error : ERROR 262 : Update Error
I'm kinda out of option, thanks a lot for your help !
well, it's been a pretty common thing for the RUU to give an error when the device goes in to bootloader (can't detect it for some reason). Most times, simply running the RUU again while the device is still in bootloader works fine.
Why don't you put hard-spl on just in case, manually enter bootloader (which will then be hard-spl) and run the RUU again. You shouldn't enter the bootloader manually unless you've loaded hard-spl or sspl on to your device. From what i understand you won't be successful from what you did after the hard reset. When your phone went in to bootloader the first time, it was with SSPL pushed to your device by the updater program to enable you to update safely. After resetting, you're back to your normal bootloader which won't help anything.
I know one time it did this to me, and wouldn't connect to my device. I started the RUU about 3 times in a row with my device on bootloader, and for some reason after the 3rd time it suddenly worked.. weird, i know.
anyway, hard-spl will make the whole process safer.. let me know if it connects or not, i'll see if i can help you troubleshoot
I wanted to install hard-spl, but it runs as a normal RUU and give me exactly the same errors as a normal run update (error stated above).
So I don't see how I could install it
Another thing weird, when I run a official HTC rom update, when the udpdate should start (device enter in boot loader, progress bar appear in bot PC an device), the Trin reset itself and boot as normal... of course the RUU gives an error due to this reboot ...
Same weird behavior with an official Orange rom...
Now I'll try with SSPL...
Oh and thanks a lot for your help
simply try to run twice ROMUpdateUtility.exe after error
Please read carefully what I have posted (and the steps I ran into)...
Already launched again RUU, it gives me an Update Error and the device is stuck on the screen that show the progress bar.
Need to soft reset... I can't launch again the RUU after that since the device is no longer recognised as connected on PC.
I confirm I can't manage to install the Hard SPL, even after laoding Des sspl from the device...
Defintly blocked
At last I have succeeded in upgrading the device. Seems like my bootloader was somehow corrupted or something... after doing another Hard Reset it have installed hard spl succesfully...
I had already done a hard reset before, so I don't understand what happened.
Nevermind, at last i can try wm6
thanks a lot for your help racerx_ anyway
hey no problem.. not sure that i actually helped haha.. but i'm glad you sorted it out. happy flashing!
Might it have been the USB driver on the desktopside ?
Did you see XP recognize and install HTC USB device again, after device disconnecting from AS and going into bootloadermode for first time ?...
Just a thought...
Not sure what it is, but it's happening again, can't update anything as the bootloader seems somehow corrupted.
When i enter bootloader it briefly display the 3 color, then grey screen with "loading" and then the hard spl screen from Olimpo... the only problem I see is that it does no longer display TRIN100, but only little dots (like if it was corrupted)...
Very annoying situation, and I have already done some hard reset, but nothing
So more exactly, where I start DES SSPL or when I enter Olipro Hard SPL (that I installed before WM6), it shows the good infos like :
TRIN100
xxxx
TRIN100
SPL-
But after 1/4 of second, it start loading for a very short moment
and display again the RGB screen with the infos except the "TRIN100" parts are like this ':':':':':':
Anyone has seen this before ???
@cedrick: You have a SD card inserted on this device, right? if so, remove the SD card and try again.
If the SD card is not the problem, then you might have overwriten the memory region where the ModelID is stored. I can help you to recover it if that is the case.
pof said:
@cedrick: You have a SD card inserted on this device, right? if so, remove the SD card and try again.
If the SD card is not the problem, then you might have overwriten the memory region where the ModelID is stored. I can help you to recover it if that is the case.
Click to expand...
Click to collapse
...... well well, that was simple hahaha (and I feel stupid lol).
yes I had my SD inserted (and I remember only now that the last time it worked I had indeed removed the mini-SD).
So, thanks to you I have understood this issue at last !
Muchisimas gracias por tu gran ayuda pof
Now the question is, wtf do u have on this SD card? LOL
Errr that's a good question... maybe it is time to clean those 4go of things (which most of those come from the SD I had on my Prophet, in the top of that)
Anyway, it's a rare specimen indeed... want a copy to play with heh ?
I tried to use imei-check to remove my cid lock but have run into problems.
first time I tried it things seemed to go fine but it never passed stage 1 and I was adviced on the computer screen that I should disconnect, reset computer and device and try again.
I tried but now the unlocker would report "communications errors" shortly after it had detected the phone as a Wizard.
Now the phone wouldn't boot (it resets itself after I get the Qtek logo screen with IPL (2.17) SPL (2.17) and OS (2.17.7.1))
I tried flashing with an original rom from Qtek (2.17.7.1) and it went well. I again tried the unlocker. exactly the same as the first time, and as the second time after that.
I again tried flashing with the original rom but now RUU wont put the rom on due to error 294 (invalid vendor ID).
the phone is still CID locked, the original rom wont install and it wont boot...
what the f*** should I do?
edit: after getting it to boot I find that gsm radio is not working, the phone does not charge etc.
Something went VERY wrong during the last flashing.
Edit: There seems to be an issue with my hardware. I dont believe that using imei-check software has anything to do with this. the flash-rom chip seems to be damaged.
I tried to run all flashing ROMS on my trinity and all failed. I think I killed my trinity. I runed RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship and the VENDER ID error appears. Neither Mary or PDAVIET have even started the update because they say the file is corrupted or the utility update dosen't work. I would like to know If by any chance I can fix my PDA.
If I'm screwed thanks any way for all the help you gave me and If not thanks in advance for new info.
You should be able to just hard reset your phone - or even soft reset. The update hasn't really started if you get vendor ID error - so it should be alright.
Check ou the wiki to soft reset or hard reset your phone: http://wiki.xda-developers.com/index.php?pagename=HTC_Trinity
you should also use a hard SPL (V1.2) to avoid using the providor lock component that stops you flashing ROMs that don't match you device vendor ID.
Alternatively - download the original ROM for your device (how is your phone branded? Orange? HTC?, Vodphone?) and flash that first.
Read more before flashing your device!
Of course - if you can't get out of bootloader mode - chech out this thread: http://forum.xda-developers.com/showthread.php?t=308691
Hi @ all,
**** happens, yesterday i tried to upgrade my rom on charmer (mda compact 2).
During installation system hangs on and didn´t finish.
So now i have only the startscreen and can reach the bootloader.
Tried now to flash an original rom, the ruu says error 294 invalid vendor id.
Otherwise the ruu (for no id) ended with error 238 file read.
My bootloder shows IPL 1.12, SPL 1.12 and USB connected.
I have read a lot of threads but cant find a answer for that.
Has anyone a good idea?
Thanks a lot for helping.
I wish all users in that great forum a happy new year
ronni
Hi Ronni,
same problem here. Do you found any solution?
Is it right, that your Device not charging and USB is not recognizing too?
Bg
Joy
Are you trying to flash WM6 ROM to your charmer? Because WM6 required IPL and SPL level at least 2.xx.
Did you tried this method to bring charmer back to life?
wow, thank you for your quick response. Hmm, I´m not shure, it´s a PDA from a Collegue, I don´t know, what he do with it. (I know only he try to flash something) Next week he take it to our office, then I try your solution
Thank you again
Joy
Bootloaderhang
Today i tried to update my rom... while the update i had an error.
i had updated the http://forum.xda-developers.com/showthread.php?t=363882
after the hardreset the phone hang by the first screen. I can press everething but nothing happens.
now I tried to flash a nother rom but it is unpossible because it can´t connect with windows mobile center on the pc.
Has anyone a good idea?
Thanks a lot for helping.
I wish all users in that great forum a happy new year
didi500
Hi there, I have a problem with my HTC Kaiser
I've managed to unlock it and flash any rom and radio i wanted, everything worked perfectly, I've had HardSPL 3.34 if i remember correctly
Them, i tried running android, flashed, started booting and... din’t boot. It starts booting but it stops with the following message: [4.2.08726] fake_vsync_int
No problem, i will just reflash back to WM6.1 and get going, BUT... i could not reflash anymore
I noticed that my SPL version has changed, it now shows: KAIS120 - SPL-3.34.0000 - CPLD-8 - USB
I could not flash any roms I've had, searching around i tried many solutions even trying flashing using the MicroSD card without luck
The errors: Either stays at 0% and... ERROR [262] : UPDATE ERROR
or
Gets to 1% and... ERROR [294] : INVALID VENDER ID (When flashing from USB)
Or remains stuck at “loading...” (When trying flashing from MicroSD)
Looking around i found that what i need was to flash the stock rom that came with my Kaiser, my kaiser was WM 6 Portuguese Brazilian, so i got the rom: RUU_Kaiser_HTC_WWE_PTBR_1.88.514.1_PTB_Shipped
Din’t worked
So i tried every rom found here: http://www.shipped-roms.com/index.php?category=windows mobile&model=Kaiser
Din’t worked either
So i tried every other rom i could find, from Chinese roms in support.htc.com to roms found online on file sharing sites, none of them worked
This is a similar problem encountered by Warbyte here, and -Rif- Here, -Rif- managed to find the correct rom, apparently Warbyte din’t have as much luck, to quote him: “Apparently the only solution is to find the matching original ROM which puzzles me as there apparently exists none”
Without other ideas i decided to come here and ask for advice, since i don’t know what else i could try
Any ideas? Thanks for your time.