Database Develop

Trying to upgrade - i-mate PDA2k DEAD !!!

I try to upgrade my i-mate PDA2K (italian) with Helmi Windows Mobile 6 Profesional R0 ...
The program started, recognize my PDA:
Your device software is about to be update from :
Device CE image version : 1.12.24
Device Extended image version : 1.12.168
Device Radio image version : 1.02.00
To :
CE image version : 5.60.00
Extended image version :
Radio image version :
While the update is in progress, your device will act as though it
is outside of network coverage. So, all your calls will be diverted
to your Answer Phone, and any messages will be delivered
once the update is completed.
Please click Update to continue.
Click to expand...
Click to collapse
After then, remain stucked on:
Checking the information on your device ... Please wait ...
Please don't disconnect your device from your PC or
the power supply until the update is completed.
Click to expand...
Click to collapse
PDA is off, nothing happen... I was wait about 1/2 hour and then I take my PDA from cradle...
Nothing happen...
Now, the only thing I see is SERIAL (top of screen when out of cradle and USB when I put the PDA on cradle) and v2.06 (down to screen).
Try to reset, hard reset... nothing...
Can anyone help an moron like me ??? (I'm reaaly moron, not practice with the PDA's)
(I use Vista Business, I update Windows Media Device Center before this...)
Regards...

read wiki?
Did you follow the steps as indicated in the wiki? As you upgrade from 2003:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade1_WM2003SE0
See next page for Vista related issues...
Read and good luck!

Yes, I follow that steps...
The problem now is: I cannot acces my PDA, I can't revive it...
How can do that ?
Thanks...

Hi, You say:
Now, the only thing I see is SERIAL (top of screen when out of cradle and USB when I put the PDA on cradle) and v2.06 (down to screen).
Well i guess this is the bootloader, so when you connect the phone to the cradle you can upgrade??
Success

As MuratNL says: you are in bootloader. Connect the cradle (with PDA) to your PC (SERIAL changes to USB). Now execute the rom upgrade file from your PC and upgrade should begin.
If you have problems with connection and Vista read wiki (see above link) or try the upgrade from a WinXP machine...

I try this, but nothing happen.... Tonight I try with an XP Pc...

OK, I follow the guide posted by bins and everything goes OK...
(The I put an Italian ROM [ WM6 ] and run perfectly)
Thanks

Just a quick note:
i've experienced that thing so many times
that it's safe to say that:
IF the rom copying aint started yet, meaning YOU DONT SEE the % screen...
and if you've been waiting for that to appear so long...
and you're stuck at the:
Checking the information on your device ... Please wait ...
Please don't disconnect your device from your PC or
the power supply until the update is completed.
Click to expand...
Click to collapse
you can disconnect the BA to the cradle withouth harming the BA.
1. you can disconnect/takeoff the BA from the cable
2. on pc, terminate the upgrade process
(taskmanager terminate the RUU - "MaUpgradeUt_NoID.exe")
3. reconnect your BA still on "Serial/USB" screen
4. restart your RUU again...
that would work flawlessly. trust me. i can vouch for that.
unless you saw the Rom Copy % Screen...
"DONT TOUCH YOUR UNIT or YOUR PC or YOUR CABLES"

Big Problem?

I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.

Drake008 said:
I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.
Click to expand...
Click to collapse
I'm using a Vista PC.
After the Radio update to 1.15 the error described above is not to go away yet.
What to do, I'm nearly in tears.

Finally I got it back but with an old Romupdate from T-Online. Is there someone who got the QTC 9090 update (latest one)

That was fast..
im glad you solved your problem.
i think someone here has it.
just post what you need and make it as a title for others to read in the digest.

Im not a expert but is vista the problem??

Most likely.

Failed MDA II flash with vista notebook
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated

mda3newbie said:
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated
Click to expand...
Click to collapse
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.

thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie

mda3newbie said:
thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie
Click to expand...
Click to collapse
In vista i dont know...sorry for my late reply too.... in XP u must kill ActiveSync process called wincecom.exe. in vista, maybe u have to kill the Windows Mobile Device Center....i dont know...
Dont forget, put the Qtek 9090 in Boot Loader Mode (Pressing Power Button + Record Button + Reset), maybe will appear USB and u can format the device.
If this does not work, try on Windows XP....Find a friend with Windows XP and ask him to use his PC only to do that.
Maybe somebody in forum have the Windows Vista and can help u....
Sorry my terrible english....

Sjogos said:
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.
Click to expand...
Click to collapse
hi guys I tried the step by step process and when im enterin( Task 28 ) then pressed Enter -
Invalid command : Task28
For a help screen, use command ? or h
does any one know where the problem is??

Try this
Downlaod the XDA IIs .exe file and run it - no need to put into USB mode
http://www.o2online.ie/wps/wcm/conn...es+&+accessories/Xda+Range/Software+upgrades/
this should reset to factory default (o2)
it runs on vista too
I am not 100% sure it will work but worth a try

diesel_dog said:
Im not a expert but is vista the problem??
Click to expand...
Click to collapse
Yes, i know my reply is late but the problem ist 100% Vista! i Tryed 2 ours with vista...then i decided to format my pc and to install XP. At the first try it worked!

my wizard has been broken

hi
i need help my wizard doesnt boot after i tried to update it to wm6
i reinstalled the clube imate room but didnt boot also
so what can i do ?
please help

Can you describe in more details?
Can your Wizard enter bootloader?

yes describe...
laogiacodai said:
Can you describe in more details?
Can your Wizard enter bootloader?
Click to expand...
Click to collapse
more details please.... does it enter to a rgb screen? striped blue green red screen?

yes
it can enter bootloader so i installed the original rom from clube i mate on it but it didnt work
and it can enter format mode but when i press send it says
format failed .
thank u

help !!!!!!!!!!!!!
plzzzzzzzzzzzzzzz

+ Que PPC said:
more details please.... does it enter to a rgb screen? striped blue green red screen?
Click to expand...
Click to collapse
yes , it does so can it work ? plzzzzz

Let me see...
khaledvic said:
yes , it does so can it work ? plzzzzz
Click to expand...
Click to collapse
Are you... G4 or G3
Maybe you have upload your wizard G3 with a rom for G4 or viceversa
If the RUU progress completes the upload, and the wizard starts... when it stucks? on the welcome screen?
If it is...? You can download the MTTY tool it seems the version 1.4 or something or .4, i dont remember exactly... conect your PDA to activesync in activesync uncheck the allow USB conections and run de mtty in an option select port usb (if it doesnt appears, you canenter bootloader and reconect your wizard...)
A blank screen appears then...write exactly I told you ok?
task 28
then it seems to work on something... then write:
task 28 55aa
it works again... without unplug your wizard... upgrade again your wizard it must to do the job.
tell me if it works please.

thank u
+ Que PPC said:
Are you... G4 or G3
Maybe you have upload your wizard G3 with a rom for G4 or viceversa
If the RUU progress completes the upload, and the wizard starts... when it stucks? on the welcome screen?
If it is...? You can download the MTTY tool it seems the version 1.4 or something or .4, i dont remember exactly... conect your PDA to activesync in activesync uncheck the allow USB conections and run de mtty in an option select port usb (if it doesnt appears, you canenter bootloader and reconect your wizard...)
A blank screen appears then...write exactly I told you ok?
task 28
then it seems to work on something... then write:
task 28 55aa
it works again... without unplug your wizard... upgrade again your wizard it must to do the job.
tell me if it works please.
Click to expand...
Click to collapse
I dont know what to say to thank you .
I'll try this .
If the RUU progress completes the upload, and the wizard starts... when it stucks? on the welcome screen?
yes on the i mate blue screen it stops .
I'll search for MTTY tool
thank you so much

YES
khaledvic said:
I dont know what to say to thank you .
I'll try this .
If the RUU progress completes the upload, and the wizard starts... when it stucks? on the welcome screen?
yes on the i mate blue screen it stops .
I'll search for MTTY tool
thank you so much
Click to expand...
Click to collapse
Yes it must to work!
Good luck!

thank you
but it didnt when i see the white screen i wrote
task 28
a message says:
"invalid command : task 28"
and for help
and the same when i wrote
task 28 55aa
i try it on tow rooms but any has worked
have i to try it on wm6 room ?
plz.....

so...
khaledvic said:
thank you
but it didnt when i see the white screen i wrote
task 28
a message says:
"invalid command : task 28"
and for help
and the same when i wrote
task 28 55aa
i try it on tow rooms but any has worked
have i to try it on wm6 room ?
plz.....
Click to expand...
Click to collapse
Lets revive facts... ok?
what did you do?
What it didnt?
So when you saw the white screen on mtty you wrote task 28
and nothing happens?
said invalid comand?
xtrange! so xtrange...
what info you've got?
ipl and spl?
in wich one rom are you?
do you have pc xp or vista? if vista... try search for mtty_vista
I download the mtty_47 not works!
downloade too the 1.0 not works...
Whats the matter?
Where does I saw 1.04?
lets foun it...
I have the same issue i remember but it was the version of mtty

plzz...
help

help
+ Que PPC said:
Lets revive facts... ok?
what did you do?
What it didnt?
So when you saw the white screen on mtty you wrote task 28
and nothing happens?
said invalid comand?
xtrange! so xtrange...
what info you've got?
ipl and spl?
in wich one rom are you?
do you have pc xp or vista? if vista... try search for mtty_vista
I download the mtty_47 not works!
downloade too the 1.0 not works...
Whats the matter?
Where does I saw 1.04?
lets foun it...
I have the same issue i remember but it was the version of mtty
Click to expand...
Click to collapse
thank you so much
first turned on the wizard
i enteres the boot loader mode
i disabled usb conection from active sync and killed its process
i opened mtty tool
and chose port usb and the other setting at default
(
note :
i tried on the mtty 0.1 and then on mtty 1.42 with the same result
)
i wrote "task 28"
the message apeared :
"invalid command :task 28
to help screen use command h or ?"
i wrote "task 28 55aa"
the message apeared :
"invalid command :task 28 55aa
to help screen use command h or ?"
i tried to write "h"
and "?" but the same message appears
the sheet was blank when i wrote "task 28"
so thing apeared before its "cmd>"
before every thing i write
i searched on the forum and found something and tried it was
"set 16 0"
it worked correctly
like this(after i opened new sheet when i unpluged my wizard and pluged it again and made a rest and entered to bootloader)
"
set 16 0
Cmd>
"
i tried also "task 8"
but the same message
"invalid command :task 8
to help screen use command h or ?"
i am running win xp sp2
now my diveice is turned off and doesnt work i think its battery has not enough power cuze i ve installed tow roms but it doesnt charge now
i dont know why the lab is off so i think it is not charging when it work again i tell you about the information ok
thank you

please visit it like my problem
http://forum.xda-developers.com/showthread.php?t=425526

Mmmmmm
khaledvic said:
please visit it like my problem
http://forum.xda-developers.com/showthread.php?t=425526
Click to expand...
Click to collapse
I have the same issue like yours men!
long time ago... a month i think, i can do this procedure but now i cant!!!!
It makes me sacared even my phone is ok! if crashes, it never works again and it will be the same problem like yours.
Im gonna make a research... i start a new thread asking troubles with mtty... yes it is mine asking about our trouble.
Try to found a wall charger just to charge batteries...

thank you so muche
i found a wall charger but the wizard doesnt reponse it doesnt turn on or charg

Great !
It charches again thank you so much .
the numbers are :
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1
the last clube imate room thank you

is it possible?
that these commands on mtty
does not work on wm5 have i to install wm6 ?
cuz your room is newer than mine

Nop
Cause the last time i try to reflash via mtty my rom was stucked on RGB screen with ROM 2.16 WM5 Tmo Original, so... why your divece can charge if it stucks on RGB on RGB dont charge! or it stucks on Splash screen the one that say the ipl info?
try to reflash an original ROM but TMOBILE search for the 2.16 and do me a favor... change your cable, last night my brother got a problem with his HTC Universal... when he starts to exchange his info by PC to PPC the pda starts to blink on and off again and again and then restarts by itself.... his USB Cables was Broken, so try other one.. all the USB-miniUSB cables are the same try with a cellphone cable.

+ Que PPC said:
Cause the last time i try to reflash via mtty my rom was stucked on RGB screen with ROM 2.16 WM5 Tmo Original, so... why your divece can charge if it stucks on RGB on RGB dont charge! or it stucks on Splash screen the one that say the ipl info?
try to reflash an original ROM but TMOBILE search for the 2.16 and do me a favor... change your cable, last night my brother got a problem with his HTC Universal... when he starts to exchange his info by PC to PPC the pda starts to blink on and off again and again and then restarts by itself.... his USB Cables was Broken, so try other one.. all the USB-miniUSB cables are the same try with a cellphone cable.
Click to expand...
Click to collapse
thank you,
my wizard stuck on the blue screen i-mate blue creen
this rom is original froum ftp.cubeimate.com the last one
and i have three usb cables and i try ech time difrent one
thank you

Installing ROM Problem

Hi My Friends
I'm A Beginner In XDA
I Downloaded This ROM From HTC Web Site Support
Link : http://www.htc.com/www/SupportDownload.aspx?p_id=13&cat=2&dl_id=21
THis is an Original ROM From HTC (WM6.1)
I Tryed to Install It but I Have a Problem
When I Open The Install File and Continue The Parts Of Install And Then I'll See The Two Progress Bars On My PC & PDA
It's Go TO 1% percent and then Disconnect And After An Automatic Soft Reset I See The Previous Windows .
The Error Message That I Saw Is In The Attachment Picture.
The First Picture is The Finished Message
The Second Picture is My Upgrade Version From Ver To Ver !!
Please Help Me.
Thanks
Best Regards
MF2FX

STOP NOW
What phone are you using
What version of windows xp or vista

T-MOBILE MDA III - Qtek 9090 please help (I from CZECH REPUBLIC)

Hi I from CZ and I have problem with my MDA III
what can I do ? please
"bootloader doesn't work and master reset too doesn't work" please help i dont know how to flash i was read much tutorials there but I not found a right tutorial please help me I dont know what i can do I form CZ and my mail is [email protected] ( kdyby nekdo z CR na to narazil tak mi prosim napiste a domluvime se na icq treba klidne kdybych to rozjel tak poslu i nejake penize nebo tak akorat mi prosim napiste co nejdriv ve stredu jdu jinak do servisu ale tam to bude stat hodne ) (this is PH20B

actually, depending on your screenshot, your device is exactly ready to flash, you just gotta put it in the cradle ad start flashing it with whatever rom you want. because what you see there is the bootloader:
How to enter into the so-called Bootlader mode on the HTC Blue Angel devices
Note: entering Bootloader mode will result a Hard Reset if you have WM2003SE on your device!
1. Press Power + record (above the volume slider) + softreset at the same time.
2. You should see a white screen with "Serial" text on it and the Bootloader version.
3. Put your device into the cradle
4. Make sure that the charger of your PDA is connected to the cradle.
5. The text should change to "USB" now.
what i want to say is, start flashing following the WIKI Wizard or several step by step guides to be found in the wiki and the forum

Chef_Tony said:
actually, depending on your screenshot, your device is exactly ready to flash, you just gotta put it in the cradle ad start flashing it with whatever rom you want. because what you see there is the bootloader:
How to enter into the so-called Bootlader mode on the HTC Blue Angel devices
Note: entering Bootloader mode will result a Hard Reset if you have WM2003SE on your device!
1. Press Power + record (above the volume slider) + softreset at the same time.
2. You should see a white screen with "Serial" text on it and the Bootloader version.
3. Put your device into the cradle
4. Make sure that the charger of your PDA is connected to the cradle.
5. The text should change to "USB" now.
what i want to say is, start flashing following the WIKI Wizard or several step by step guides to be found in the wiki and the forum
Click to expand...
Click to collapse
I want go to bootloader menu but is dont work I press Power +record+softt reset with stylus but it doesnot work and when I conect MDA with cabel to COM this cable in not USB and active sync not found MDA and when I start update with exe it write me not found (sorry for my english) help me please ? can you write me more detailed tutorial what can I do for flash please what I must download and what I must do anywhere dont work download and i dont know where I can download any files
EDIT : Flashing is not compatible with serial cable ? I have this cable
Code:
http://www.i-obchod.cz/product.asp?productid=6663
this is to serial port (COM) when i buy this
Code:
http://www.easydevices.co.uk/pp/PDA_Accessories/Cradles/QTEK_9090_USB_SYNC_CRADLE.html
work it with this ? or it better when I go to service and pay 800kč this is about 25 Euro or 40 dollars and when I place an order this cradle i pay for this 18£ this is about 600kč and about 7days when it send me to home and I go to service tomorow but if I Flash it I not having to go to service

hi guys!
my ba also displays this strange message after an unsuccessed update (disconnected before finished). i have tried to install the update once more but it says: error 101: connection error. because i own my ba just since 20 hours, i don't know what to do now. so maybe someone could translate it into newbie-language. one more thing: unfortunately i use vista.
thanks for your help!

tried it once more with the new windows mobile device manager but my pc does not find my ba. vista just plays a sound when i put it on the cradle. i think you are the only ones in the hole www who can help me. need your help!

use maupgradeut_noid for upgrade
both of you read wiki there are solutions to your problems

maupgradeut_noid tells me this:
don't think that it is right.

hi folks!
i have tried it a hundred times with my vista mashine and a couple of times with xp on virtualbox but nothing. 15 minutes ago i have turned on my old xp mashine, downloaded the ROM from tmobile germany and started the application. it worked for me without maupgradeut_noid. only the original rom and nothing else. so my tip: don't waste your time with vista! xp is much better for solving this problem. thanks xp!

ok, but as i see it you didn't solve a problem but avoided it, and not even in the best way. i use vista too and i am unable to re-flash my device. the general problem is that the identifier of the device change over the flashing process, so vista downloads new drivers and cuts the connection. as i understand it, there is hardly any way to avoid that.
of course you do't need to use maupgrade_noid for an original rom, the _noid file is, as implied by the name, to avoide the device from identifying, so you could flash a WWE Rom to a rather locked german device.
as you might have realised, the picture you posted shows the magician and not the blueangel, hence the name Maupgrade instead of Baupgrade, which again is solved by the _noid version of the file and putting the device to bootloader first.
that the window does not show the versions from what version you flash to what version exactlyu doesn't matter at all. but as mentioned before, you should use an xp machine which will work like a charm!
am i to understand, that you have the latest official t-mobile rom on? the wm2003se?
as fast and battery friendly that might be, it is so out-dated and practically no newer third party software will be supported, like the fantastic application SPB Online, and the interface is incredibly ugly. if you ever want to try and flash your device again, try my tips above and it will work out just fine, as you seem to have mixed up a few things, but never mind.
i wish you best luck for trying again and will stand by for support, whether something might still not work out as planned.
good luck
Chef_Tony

well if you upgrade under vista take a look here
also look here for MAUpgradeUT_NOID and proper files - it is on the bottom of the page, so you only need the nbf files