Help, I have Qtek 9100 on the O2 network in England, it doesn't have all the O2 customisations so I'm thinking it is a basic Qtek ROM. At the moment it is running the 1.1.7.5. ROM. I'm looking to upgrade the ROM, the 2.1.7 seems to be the best. But despite reading through the forum I have some questions.
1 - Does the Qtek 9100 need CID unlocking? I've read that if I install the Qtek 2.1.7 upgrade I won't need to CID unlock the phone.
2 - Is the latest ROM shown on the Qtek site the 2.1.7. version?. I have tried to log on to that site but its says it does support the IMEI I've entered.
3 - What is Cingular?
4 - Could some one post the link to the 2.1.7 Rom English upgrade?, I've found a step by step guide to upgrading and loads of links to different ROM's But want to be sure that I've got the link to the right one.
5 - Is it worthwhile carrying out the upgrade, and how likely am I to bust my phone?
Thanks in advance for the advice, In short all I want the best upgrade with the least amount of hassle to upgrade.
Hi,
If you stick with the Qtek rom, you dont need to CID unlock...but it is worth doing for future use...as you can not CID unlock a v2 ROM....yet.
Cingular is a US phone company...like O2, T-Mob etc.
If you follow the instructions, you should be ok, i have done a couple, and touch wood have all been ok.
I think you need a ROM from this lot:
ftp://ftp.xda-developers.com/Wizard/Roms/Qtek/
but I dont know which one is the newest...most stable etc.
GOOD LUCK
I'm in a similar situation here, I've currently got the O2 Supplied 2.21.4.1 WWE ROM, most people here seem to be upgrading to other ROM's such as those supplied by QTEK... looking at the Wizard ROMS on the FTP, which one should I be upgrading to? And what are the 'prophet' ROM's on there?
think I've got it it sorted now, shouldn't need to CID unlock if I use the Qtek 2.1.7 release. Not sure I need any other companies Roms unless someone is going to tell me they have some features I can't live with out ?
Ok I’m a total noob and ‘ve have already unlock my T-Mobile MDA so I can use it as a Cingular cell phone . about I know I got a G3 since my
IPL is 2.xx
Spl is 2.xx
Gsm 2.35.11
os 2.26.10.
Now my Question is what’s next? What’s that rom I’ve been reading about? howe do i know what version i have ? What is the os 2.26.10? What version should I be using? how do I REMOVE THE T-Mobile logo an stuff? I know it’s a lot of question but I figured that every one can jump in and give me some knowledge than you very much .for reading this.
ROM = firmware = Windows mobile
OS 2.26.10.2 = newest oficial firmware
Radio 2.35.11 - I think it does not exist
IPL/SPL = bootloader (it depend on the end of that number) if you have G4 (IPL/SPL ends 0001), than you can`t unlock and write unoficial (better then oficial) ROM
T-Mobile logo is easy to rewrite by any unoficial ROM or by your cooked splash screen
for simplicity...think of a ROM as the operating system and the extended ROM as the bundled software your computer comes with...
you can flash your phone with any wizard ROM you'd like...and as a noob you may not know that most ROM's are cooked without network customizations so you'll need (in your case cingular) the cingular customizations cab file (do a search)
like johnny said...most custom ROM's have all the tmobile/cingular/etc bull**** removed so you won't have to worry about it
the os 2.26.10.x is the version number of a ROM (newest official as of right now)
know this...you will void your warrenty when you unlock your phone further which you'll have to do...so first go here:
http://forum.xda-developers.com/showthread.php?t=285435
and then find a ROM you like...
THX a couple more questions
Ok 1st I need to say THX to both Johnny & j3d1n4s7y For your reply I got a couple more questions if my SPl is 2.26 so I need to down grade to bring it back to 1.xx right?
What is
Rom 2.26.10.2 WWE & Radio 02.47.11 what are their purpose?
thank you in advance
Be Careful...
-tiouko-
I notice that you want to upgrade/downgrade ROMs. Be aware that there are two types of devices, G3 & G4 and you should be aware of what type of phone it is. If when you boot your phone & the IPL & SPL read 2.xx then you have a G3 phone if it reads 2.xx.001 or something like that then you have a G4. Be aware that if you use the wrong type of ROM to flash you will brick your phone - read; read; read; before you start flashing your ROM.
http://forum.xda-developers.com/showthread.php?t=285435 by Doc P is a great read if you have a G3
Good Luck!!
And Btw, I believe ROM stands for "Read Only Memory" which is where you write the OS and then the applications only read from this place. It is pretty much similar to the ROM on your PC.
tiouko said:
Ok 1st I need to say THX to both Johnny & j3d1n4s7y For your reply I got a couple more questions if my SPl is 2.26 so I need to down grade to bring it back to 1.xx right?
What is
Rom 2.26.10.2 WWE & Radio 02.47.11 what are their purpose?
thank you in advance
Click to expand...
Click to collapse
... and WWE = "World Wide English", the language of the ROM. FRE might be for French for example. The World Wide part means that the version is applicable accross all English Locales, as opposed to having localised English versions for Australia, the US, and the UK for example.
Yeah man thanks for the warnings I believe that my is a g3 because is 2.26 and my spl is 2.26 with out the extension. I'm currently doing my readings carefully before i do anythings major.
This is a wonderful thread.
I am a newbie and I am facing lots of problem with my ROM.
I am using Dopod838 and my phone warrenty is void.
I am thinking to upgrade the ROM since my original rom does not support A2DP.
Since my phone is unlock, whereby I can use any provider sim card and use it in my phone, do I still need to unlock my rom?
I got one las question i confirmed that my wizard is a g3 according to the ultimate guide I should downgrade if i want to run home brew rom which is what i wanr to do . I've already downloaded the button rom 1.o5 along with lockwiz o.2b my question is do I cid unlock first or do I downgrade with button 1.o5 than cidunlock second I could of swear I was suppose to cid unlock first.Please help.
tiouko said:
I got one las question i confirmed that my wizard is a g3 according to the ultimate guide I should downgrade if i want to run home brew rom which is what i wanr to do . I've already downloaded the button rom 1.o5 along with lockwiz o.2b my question is do I cid unlock first or do I downgrade with button 1.o5 than cidunlock second I could of swear I was suppose to cid unlock first.Please help.
Click to expand...
Click to collapse
5th Sticky has the information you need, its title is:
SOLUTION FOUND -CID/sim UNLOCKING FOR WIZARD WITH AKU2 ROMS.
Gives you a step by step process. Basically you can't CID unlock until you downgrade to the button rom. By your post it looks like you have the tools you need. This thread will give you the instructions on how to use them and when.
Thx Buddy exactly what I wanted to know I'm going to get started I'll let you know how I did.
Success
Success, success, success Thank you guys so much for your help I did not brick my expansive device .
Ok I followed all the steps on the guide buy using button's 1.05 ROM and wait specially when it reaches 98% Than I used lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b and finally I used button's 1.05 ROM again to get my SPL down to 1.01. I got my phone both Sim Unlock & Cidunlock I guess I’m ready for the world. Yet still have more questions .
I got
IPL 1.01
SPL1.01
Gsm1.12.10.0
Os1.5.4.2
Now I need to install the best I’m using singular but I don’t care about their ROMs I need the latest of everything including extended roms , radio, you name it . Any suggestion would be greatly appreciated..
Are you listening decent_devil since you seem to be in the boat as I am?
tiouko said:
Success, success, success Thank you guys so much for your help I did not brick my expansive device .
Ok I followed all the steps on the guide buy using button's 1.05 ROM and wait specially when it reaches 98% Than I used lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b and finally I used button's 1.05 ROM again to get my SPL down to 1.01. I got my phone both Sim Unlock & Cidunlock I guess I’m ready for the world. Yet still have more questions .
I got
IPL 1.01
SPL1.01
Gsm1.12.10.0
Os1.5.4.2
Now I need to install the best I’m using singular but I don’t care about their ROMs I need the latest of everything including extended roms , radio, you name it . Any suggestion would be greatly appreciated..
Are you listening decent_devil since you seem to be in the boat as I am?
Click to expand...
Click to collapse
Yes I m .. hehe! I hv lots to read.. I still got to read through all the sticky note so that I can load a new ROM to my dopod 838.
I'll probe u when I bump into problem.. hehe!
Some of the best ROMs are introduced (and downloadable) via this forum. So you can check out yourself what they include and if it fits your needs.
The latest ROMs are based on AKU 3.2/3.5, but they are still in development and can be a bit buggy.
Personally I am very satisfied using the Molski.biz 2.26.10.2 Final Edition Rom (based on AKU2.3).
skyrebel said:
Some of the best ROMs are introduced (and downloadable) via this forum. So you can check out yourself what they include and if it fits your needs.
The latest ROMs are based on AKU 3.2/3.5, but they are still in development and can be a bit buggy.
Personally I am very satisfied using the Molski.biz 2.26.10.2 Final Edition Rom (based on AKU2.3).
Click to expand...
Click to collapse
thank you sky rebel i'll get right on it.
Also no problem D devil
I have a t-mobile mda....unlocked (but not by me)...how do I know if the CID is unnlocked aswell ?
bruce.wayne_ire said:
I have a t-mobile mda....unlocked (but not by me)...how do I know if the CID is unnlocked aswell ?
Click to expand...
Click to collapse
Qood question I'm not sure being that I', noob but i would assume that it's not cid unlock since you have to go the extra mile to get it cid unlock . can you tell me if you are seeing network logo ie singular or t mobile on the screen is yes it's possible that' it's not cid unlock. but keek asking hopefully some one would have the right answer for you. good luck
bruce.wayne_ire said:
I have a t-mobile mda....unlocked (but not by me)...how do I know if the CID is unnlocked aswell ?
Click to expand...
Click to collapse
If in doubt just CID unlock again. It doesn't hurt anything and that way you can be sure that you are unlocked.
tiouko said:
Also no problem D devil
Click to expand...
Click to collapse
I have successfully upgrade my rom to Molski.biz 2.26.10.2 Final Edition Rom as well!
It solved all the bugs facing by using the default Dopod rom! Hurray!
decent_devil said:
I have successfully upgrade my rom to Molski.biz 2.26.10.2 Final Edition Rom as well!
It solved all the bugs facing by using the default Dopod rom! Hurray!
Click to expand...
Click to collapse
Great man I I'm Using Molski .biz 3.o version. Now come my next challenge. wifi Have you gotten that to work yet? if yes please let me know the procedure cause i can't get that to work.
I know that the wrong thread just thought you might know. If any one read this please help.
i just got a new HTC Touch HD from orange romania. It is sim locked to the orange network. i would like to unlock it and then flash it with one of the new WM 6.5 ROM. i was just wondering if there is any chance that i can later flash back to the original ROM so that i can use the warranty if ever needed??
tseecharan said:
i just got a new HTC Touch HD from orange romania. It is sim locked to the orange network. i would like to unlock it and then flash it with one of the new WM 6.5 ROM. i was just wondering if there is any chance that i can later flash back to the original ROM so that i can use the warranty if ever needed??
Click to expand...
Click to collapse
Of course you can return to original rom. All stock roms are available for download in the wiki here.
Follow cRaCKwHoRe's guide for flashing roms and for your purposes on returning to original rom I would use USPL instead of HSPL.
In future before posting a new thread read the wiki, try searching for your answer as many people have asked this before and read the forum rules!!!
Hi,
I recently joined this site and tried the newbie article below:
http://wiki.xda-developers.com/?pagename=Wizard%20Windows%20Mobile%206%20for%20newbies
I used the HARD SPL method and My xda mini s is now showing SPL as 2.22.olip.
I am successful up to here.
when I tried to flash on ROM with WM 6 crossbow and other versions, getting the same error: COUNTRY ID ERROR.
When read the cid block with wizard service tool 4.2, the phone is CID LOCKED.
I AM TOTALLY CONFUSED.
SO , KINDLY ANYBODY PLEASE HELP ME WHAT TO DO NEXT TO UPGRADE TO WM6 OR LATEST. xda mini s is G4 device. Do i need to remove
I have never flashed a cooked rom before i have read and read lots of information here for months now ,However I have recently flashed my T mobile Mda Compact V with a stock rom from T mobile to wm 6.5 which is rubbish by the way..My question is .Can i flash one of NRGS roms http://forum.xda-developers.com/showthread.php?t=562942.if I do so will it work with hspl 1.83 or do I have to use the update to 2.51,
If so do I install 1.83 first ,then how do i do the update. Also in all flashing case do you have to use a new radio if so which one will I use I am in the Uk.
Thankyou.
no need to start a new thread, u could ask the same in NRG thread also "if" searching and reading didnt help u