Database Develop

How to clean WM5

after upgrading to WM5 ill try to install software.... when ill try to downgrading thats work perfect ..but when I try to upgrade again all the installed application before i downgrading is still there ....
how to clean ... the WM5 (hard reset) ....
thankyou ...

Look at the Wiki, the upgrade process. It says so there.

Mastiff said:
Look at the Wiki, the upgrade process. It says so there.
Click to expand...
Click to collapse
thx .. but I allready read WIKI... i still didn find itu how to install clean WM5...

Yes you did. But another thing is that you may not have understood that it was what you read. Look at this quote from the Wiki upgrade part, instruction number 11:
Hardreset based on Screen Information
When you are done, remove your device from the cradle.
Press Power + Softreset, and when the colored stripes (well, this is the bootscreen )shows on the screen.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
Quickly press Record+Camera before the versions appears at bottom right
OR, press Power+Softreset+Camera+Record at the same time.
If you have a PH20B1 device such as SX66
Quickly press Record+Windows Media before the versions appears at bottom right
OR, press Power+Softreset+Windows Media Player button+Record at the same time.
Either way mentioned above should work.
You'll see three options; change the second and the third to "yes".
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
You can do that with the camera and the record buttons.
If you have a PH20B1 device such as SX66
You can do that with the Windows Media Player and the record buttons.
If you are done, press the mail button, it'll show a white screen for a while, just wait.
If the bootscreen, aka. the colored stripes is displayed, Wait more, you are booting.
The welcome screen to set up your device should appear soon.
Click to expand...
Click to collapse

help
thanks man ... really works....

No problem. I have been there myself (the "read the Wiki" - "I read the Wiki"-part). :roll:

Try this:
http://forum.xda-developers.com/viewtopic.php?t=27966

http://forum.xda-developers.com/viewtopic.php?t=27966
this tools does not work for me....
im using with 3 button ... its works... anyway thanks man....

I tried it, and it didn't work on my BA.

Just Get Wizard, and have some questions

Hi there!
I've just get a Wizard, and it has a GER ROM. I'm qiute bad at german, (and english too) so I want to upgrade it to a WWE ROM. My question is, what is the most clean, and fastest ROM, and where can I download it? I think there must be a step by step for newbies, but where is it? (post link please),
If I upgrade my rom, will the slide-keyborad changes from QWERTZ to QWERTY? (Letter Z changes to Y?)
Where can I found additional reg tweaks, and modification (such as overclocking) to speed up my Wizard? Which of them is the most useful?
Sorry for the many quetions. Now you should ask "Why don't you use the Search button above?", sorry but I'm too excited about upgrading to WWE, but after I've done with that, I'll use it.....Sooory
Cheers,

Hi, you need to upgrade to aku2 imate rom.
download this http://www.clubimate.com/support/KJAM/ROM/K-JAM_WWE_216901_2169101_020710_ship.zip
unzip it
and then activesync your phone to the pc and run above exe.
(no need to unlock your phone as it is an imate rom)
Yes the keyboard will probably change but can be changed for your language use registry wizard see here and download version r and install
http://forum.xda-developers.com/viewtopic.php?t=39725
dont forget you also need to install this OpenNETCF.SDF.wce4.armv4.cab http://forum.xda-developers.com/download.php?id=9341
to get registry wizard to run. (reg wizard has the other tweaks you wanted)
For overclocking see here http://forum.xda-developers.com/viewtopic.php?t=40284

Thanks for the help. I've upgarded my Wizard with Summiter's rom, but my WiFi couldn't get work. so I'll try the iMate ROM ASAP.
Other questions about phone:
When I get it out of the box, it has a T-mobile ROM on it, and it has the ability to dispaly cell information.( about which town you are in), now my new ROM hasn't got this feature. Was it a Cab customization, or just an option in the WM5.0?

There is a thread here about cell info and a program you can try. http://forum.xda-developers.com/viewtopic.php?t=46803
Also you can get cell info from gsmtestmode.exe in \windows on the device and make a link to it.

white screen after upgrade

I posted this also on wm6 forum but no one replies...
I tried to upgrade to new wm6 italian roms but after upgrade finishes the p3600 doesn't make auto boot, pressing reset the device start booting and show the first scree but after the screen becomes white and stop going on.
The only rom working is this from lwsw wm6.
All other roms (mun, italians translated) after the upgrade the system doesn't finish first boot and remains white.
I can enter in bootloader pressing on+camera+reset and install italian wm5 gps enabled rom or lwsw wm6 english rom, but no one of the others.
I tried also sspl.trin and hard spl but without success.
What can do to let the upgrade finalize with italian or mun's wm6 roms?
Thanks

i locked my qtek 9100

i locked my qtek 9100 whit stupid 4 leter pasword and something went wrong i cant unlockit, the pasword doesent match.
It is not sim locked.
Plz help!

You can only hard reset your device by the reset hole while holding CommManager + Voice Command, then press Talk button to perform.
And for sure if you didn't backup/synchronize your data using ActiveSync, all of them will be lost.

Downlgrade qtek 9090 from WM5 to WM2003SE

hi, I tryed to downgrade my qtek 9090 to wm2003se but I had no success.. i would do it because i have some problems with bluetooth. in this forum I found this article which explains how to fix bluetooth problems ( http://forum.xda-developers.com/showthread.php?t=274425 ) but I'm not able to find all files nedeed... is here someone who can help me? it's the same for me downgrade the rom or fix bluetooth problem.
I have the original rom downloaded from www.pocketdevice.it but when I try to install it, the installation software sais that with wm5 it cannot install the rom (ROM.Qtek.9090.v.1.40.04 ITA).
please excuse me for my bad english! I hope that I've been quite clear to explain my problem..
edit:
I found this page http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade but
# Qtek 1.40.556
# Qtek 1.40.553
# Qtek 1.40.147
doesn't work...
edit 2:
I tryed to restore an old backup but wm5 doesn't accept wm2003se's backup.. wm5 doesn't accept backup at all.. uff..

first to exclude the most common mistakes:
- did you set the phone in bootloader before starting the flashing?
- did you use the BAupgrade_noID.exe, instead of the BAupgrade.exe?

- I only tryed to install the original ROM using a USB connection.. Where can I find the other files you mentioned?
- With "bootloader mode" you mean click on the starting button and camera button at the same time? When I upgraded my ROM from wm2003se to wm5 I only connected my Qtek and started WM5 from my computer not using the "bootloader mode"

Lollo_RM said:
- I only tryed to install the original ROM using a USB connection.. Where can I find the other files you mentioned?
- With "bootloader mode" you mean click on the starting button and camera button at the same time? When I upgraded my ROM from wm2003se to wm5 I only connected my Qtek and started WM5 from my computer not using the "bootloader mode"
Click to expand...
Click to collapse
I know that, when you try and flash the original rom or original updates, you usually don't have to do the things above, but, when i had to downgrade to wm2003se, it wouldn't have worked without.
1. i try and attach the _noid.exe that i downloaded with a helmi rom, as google wouldn't find a direct download source and i wouldn't want to search this forum forever, and as you don't search it yourself, i assume you don't want to spend more time looking for it as well. Anyway, the noid.exe is the same flashing prog as the original but it bypasses the check for country id and other crap.
2. the bootloader mode is also essential because, well... i don't know, why exactly, but i assume that not all roms and flashing software manage to enter the bootloader mode correctly, or too late, and you could get stupid errors like it was the wrong device for that flash.
so, i hope, the upload worked, it is everything you need to flash your device, either put the "nk.nbf" of your rom in there, or unpack the original rom and put the noID file in that folder and start it

ok, i did exactly what you wrote and now everything work! thank for you help!

why would you even downgrade? i upgraded mine to wm6 and i think i'm not going back to 2003se

first of all, because english is not my mother language and the os language is english. i found some problems using bluetooth and wifi connections and i could not download the right patch so i decided to downgrade to wm233se

SIM TOOL KIT is the only reason one would want to downgrade

Maybe you could try an 6.1 ROM.
RUU_BA_xplode_WWE_6.11.00 works perfectly and has an standard wm6
interface.