laptop no longer recognizes tilt or tytn; changed usb cables; rebooted both devices and laptop; no go..
mssg I get is "one of the usb devices attached to this computer has malfunctioned. and windows does not recognize it"; any suggestions; cannot sunc nor tether via ISharing.
tia
a in yul said:
laptop no longer recognizes tilt or tytn; changed usb cables; rebooted both devices and laptop; no go..
mssg I get is "one of the usb devices attached to this computer has malfunctioned. and windows does not recognize it"; any suggestions; cannot sunc nor tether via ISharing.
tia
Click to expand...
Click to collapse
Hi
First of all try to reinstall Microsoft ActiveSync, than in the ActiveSync options, in your device, be sure that in "Connections..." setting "Synchronize all PC by this connection" is checked and below "USB" showed!
Otherwise, if your device, when connected to the PC, also doesn't charge (if you have this option enebled on your PDA!) there is some problem on your PC settings concerning the USB! Try to connect to someother PC to test it!
Ciao
thx...
@[email protected] said:
Hi
First of all try to reinstall Microsoft ActiveSync, than in the ActiveSync options, in your device, be sure that in "Connections..." setting "Synchronize all PC by this connection" is checked and below "USB" showed!
Otherwise, if your device, when connected to the PC, also doesn't charge (if you have this option enebled on your PDA!) there is some problem on your PC settings concerning the USB! Try to connect to someother PC to test it!
Ciao
Click to expand...
Click to collapse
hello there, first n foremost thanks for your input!
Before trying out your possible solution i tried to connect and for some reason i was able to connect via the device today...??!!
i really dont know why, but will try your soln if this situation reocurrs.
NB: this happenned to me twice in the last 3-4 months, n i never figured out the cause ??
any other advice or ideas gratefully accepted.;
its probably the same as me and loads of other people - the pins have bent on your usb connector - probably caused by using non standard chargers and usb leads. Its been widely reported. The non-standard leads have too much space around them when plugged in and wiggle causing the connector on the tytn II to bend. Try using the lead which came in the box and see if it helps. and try using the charger that came with it too.
Can bent pins be fixed?
Hello -- I'm one of those people with a non-recognition problem. Is it possible to fix the bent pins? My problem seems to have begun around the time I lost my original USB cable. Now, all the cables I have -- ones that have been specifically sold to work with my HTC Tilt -- have the symmetrical, sort-of-trapezoidal mini-usb connection, rather than the rectangle-with-one-corner-cut-off shape of the original cable. I should say these cables do charge my device, but none of my computers recognizes it as a USB device.
Help?
Thank you,
J. Georgia
bent pins continued
I should add that the charging cable that originally came with my phone has the same connector shape, so I'm not sure what's going on.
USB Device not recognised
This is known to happen at times win Windows, and not just for the TYTN2 but a myriad of devices.
The fastest fix for this:
Reboot ur PC/ Laptop.
If this Doesn't help - Then add in a reboot for the TYTN 2 also.
The problem will go away for some time.
I know its annoying, but this is way faster than troubleshooting for contacting MicroShaft Support.
axeman said:
This is known to happen at times win Windows, and not just for the TYTN2 but a myriad of devices.
The fastest fix for this:
Reboot ur PC/ Laptop.
If this Doesn't help - Then add in a reboot for the TYTN 2 also.
The problem will go away for some time.
I know its annoying, but this is way faster than troubleshooting for contacting MicroShaft Support.
Click to expand...
Click to collapse
Unfortunately this is no soution for me. I seem to have this problem as well, since about two weeks.
I use two notebooks (Dell & Acer) and both do not show any activity when connecting my Kaiser to the original USB cable. The device is not even switched on when I connect it, nor does this happen when I connect it to the (original) cable in my car, which did work before.
Charging works fine, both in the car and when connected to both notebooks, but no Sync at all.
I have tried another USB-cable with the same result, so I suspect some hardware-problem causing me to be unable to copy files between my notebook and my phone and worse, rendering me unable to flash a new ROM onto it.
Who knows what to do next?
I am mystified, too. USB Charging and audio connections work. I have rebooted my computer and done a soft reset on my phone several times, to no effect. I uninstalled and reinstalled Windows Mobile Device Center. Still nothing at all via USB. Once, yesterday, I somehow got a Bluetooth connection long enough to sync, but haven't been able to since then. Even then, Windows Media and AudibleManager couldn't see the phone. The really weird thing is, I can see the phone connection in my Bluetooth manager, but even with all the proper boxes checked, I can't sync. When I try from my device, I get an empty progress box which disappears after a fraction of a second. When I try from my computer, it says the device is not connected, but doesn't give me any option to connect.
Would a hard reset help?
If so, would returning an unlocked AT&T Tilt to factory defaults lock it back up? And what do I do if it does?
Please help!
J. Georgia
I have had similar problems with my touch pro in the past, even bluetooth internet sharing eventually gave up the ghost.
I tried a myriad of leads and then eventually reinstalled active sync- which did the trick.
USB sync not working
[email protected] said:
I am mystified, too. USB Charging and audio connections work. I have rebooted my computer and done a soft reset on my phone several times, to no effect. I uninstalled and reinstalled Windows Mobile Device Center. Still nothing at all via USB. Once, yesterday, I somehow got a Bluetooth connection long enough to sync, but haven't been able to since then. Even then, Windows Media and AudibleManager couldn't see the phone. The really weird thing is, I can see the phone connection in my Bluetooth manager, but even with all the proper boxes checked, I can't sync. When I try from my device, I get an empty progress box which disappears after a fraction of a second. When I try from my computer, it says the device is not connected, but doesn't give me any option to connect.
Would a hard reset help?
If so, would returning an unlocked AT&T Tilt to factory defaults lock it back up? And what do I do if it does?
Please help!
J. Georgia
Click to expand...
Click to collapse
I've had the same problem with my first Tilt. There's multiple threads that detail this known problem. Some seem to be due to bent pins, some are general hardware failures (possibly the USB controller). There are some HardSPL images out there that have a "force usb" option enabled. This never worked for me, but it might be worth a shot for you.
...a word of warning....
If you end up reflashing your phone (via MicroSD) and the flash goes bad, you may be stuck, as many of the solutions for repairing a bad flash require you to USB sync. My first Tilt was a victim of this after a bad stock ROM flash that left my device without audio, and unable to flash via MicroSD.
replace usb board
you need to replace your usb board. It will run you less than $10 if you do it yourself. you can get the board on ebay
really? 4 years later?
I just got a tilt and tonight, at work, I plugged it into one of our machines through the usb cable. Don't know if it is relevant, but we run linux here at the office. IMMEDIATELY after connecting phone, my wired connection to the pc got killed. Have rebooted pc and still nothing. The network is not down cause i can connect to other pc's on the network, but no internet. Im sure it was the phone because I tried it on another pc here at the office to see if it is the phone, and immediately after connecting the phone to the 2nd pc, the internet immediately went down. PLEASE HELP! Any ideas to why it does this. How can I fix it? Thank you!
The problem has been fixed. What it does it corrupt the /etc/resolv.conf. No idea why it did this???? Any ideas?? I don't want to connect my phone to the pc until I can figure out why it did this? Thanks
A few days ago my Tilt stopped synchronizing properly. It connects (via USB) to my laptop, Activesync checks for differences, then starts "synchronizing". This is where it gets stuck. It stays in "synchronizing" for hours (until I unplug the USB cable). I can view the contents of my miniSD card from the PC, so the USB connection appears to be ok. Any ideas? I haven't changed anything on the PC or Tilt....not sure why this started.
Update: I restalled ActiveSync and all is well. Not sure how it got corrupted, but that appears to be the case.
I am having the same problem, I have a O2 Atom also that works fine with my laptop.
Well, I've had additional issues, but this time I power cycled the phone and synchronizing worked. Not sure what the issue is.
When I plug my T-Mobile Compact IV phone into my desktop usb, it often doesn't get recognised by the sync center, so nothing happens. This never used to happen with the older activesync software.
So anyway, the phone charges no problem, but doesn't always sync. I often have to reboot the phone and then it usually syncs automatically. But sometimes, when the phone has rebooted itself after performing it's daily spb backup, it still says 'status disconnected' in windows control panel/sync center. I'm on windows 7. I then either have to reboot the phone again or sometimes the pc. Unplugging the usb from the phone end and reconnecting it doesn't make a difference either.
What could be the issue here, any suggestions?
Similar problem here
Will charge via USB on PC, but not recognised in both Vista's Device Center and XP's AciveSync. Not even a 'connected' tone from PC.
Any ideas for fix chaps?
Thanks in advance
I seem to be having a very annoying problem with my Galaxy S when i attempt to use it as "PC Internet" when i plug it in via USB Port.
I plug it in via USB and select PC Internet but after random times its as if i unplugged it and re plugged it back in. I hear the windows sound that you get when you unplug a USB device. So basically for some reason i cannot seem to maintain a connection through USB. Sometimes it works for 10 minutes, sometimes it works for 1 minute ect.
I have tried to set my usb's power save feature off and still getting an issue with it. I have also tried uninstalling and reinstalling the drivers to no success.
Not sure if this could be the problem but im running windows 7 64 bit. Hoping that its not a 64bit related issue.
Any help or suggestions would be appreciated.
thx.
forgot to mention im running the stock 2.1 update 1 on the bell version of the phone.