I have a treo750v spanish version...
But as I`m not from spain I`ve tried to change WM5 to WM6 UK...
But i can`t understand what went wrong...
it just died...
when i first got to xda-developers, I did download the "treo750_5.2.1 933_akuo.7.0lite, did everything as it was told to do...
but i allways get stuck in the same error when i try to flash the S.O. ...
"ERROR [226]:FLASH WRITE"
is there any way to revert this to it`s original state?
att: i have tried all the recovery tools from PALM
On the boot it says:
"CHEE100
IPL-0.20
CHEE100
SPL-1.40.oliNex".
please help me...
thanks
guess you helped me so i might as well try to help you...
it's hard spl-ed so you should be able to flash both from sd card or using the KaiserRUU...
OR the palm treo recovery tool?!
true...
but it just doesn`t work...
I don`t understand...
when i try to flash the OS it just doesn`t let me do it...
when I try both metods, it stops flashing in the midle...
"ERROR [226]:FLASH WRITE"
palm recovery tool, doesn`t work as well :S
Related
Hello!
I tried to flash my Charmer with the new german Aku 3.3. At first everything seems to be ok, but at 95% it stops and i got the Message: update error- there is an comunication problem! So what can i do? I tried to flash the old rom back but there comes also at 95% a message: invalid command - nfb file cannot be used for your pda!
Please help me !
Greetings Musna!
Ps: can somebody upload a sd image for the mda compact II !
Go to bootloader mode, then try to flash RUU rom (1.x). You can find it on Charmer wiki.
It doesn`t work too, it always stops at 95% has anyone another idea?
did you try hard reset?
Yes i tried hard reset, but it is always in bootloader!
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
nitrane said:
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
Click to expand...
Click to collapse
The aku3.3 is up to date the bootloader version!!!
IPL and ISP version now is 3.00.
http://www.windowsceportal.hu/forum/viewtopic.php?t=1079
Sorry but i do not speak hungarian. What do you want to tell me ?
I´ve got the same: My charmer is in Bootloader IPL 2.06.0001 SPL 3.08.0001
I can´t downgrade to AKU 2: Please order a newer Version.
Every try to upgrade to AKU 3.3 failed at 95% with Error 326.
Is there any help for my charmer???
oh.**** !!!! I got the same problem with them and my first pda uk rom already empty screen and then i try with my scrond pda German rom it the same problem and now just only show in bootloader screen.Have i ask someone who knowage about this he told me that if SLP in you PDA have chang it be hard to repair.So,I think I lose 2 PDA did I try to flash in T-Mobile Official Rom de that i hope to develop it but i hve to kill 2 Charmer.Who take responsibilities,T-Mobile right ???
Ok no problem you can repair it! At first you have to brand your device with the rom you want to! After 95% the Problem will come again! When it stops you have to go with a reset to bootloader again.When your device is in bootloader you have to install the Radio Rom from this thread:
http://forum.xda-developers.com/showthread.php?t=302768
After that your device will be able to boot again and it should work!- But the Problem during the installation will stay,so you have always to use this way to flash your Mda compact II!
In the new rom there must be a problem with the radio rom and this causes the broken device.
I`m sorry for my bad english but i`m not used to talk very much! So i hope you understand what i mean!
Greetings from Austria Musna!
that link is broken
Then try this one:
ftp://xda:[email protected]/Prophet/Radio_Roms/Prophet_G4_RadioRom_v2.47.11.exe
You can find the radio rom also on the ftp server. Prophet> Radio Roms>Prophet_G4_RadioRom_v2.47.11.exe
You can try different Radio Rom versions, i have flashed the v.247.11 and it worked.
Normaly it should work!
Thank u so much !!! My Charmer secrond PDA come back have life again and it can working.So,my Charmer first PDA UK rom still empty screen and notthing working when i press any button.Who can slove this problem !!
Musna do you have any massage such as msn
Hey guys i tried to update my rom and while the update stops in 99% and said updtae ultiality Error.
now my Telefone doesn't start and stay in the 3 Colors Screen.
please Help
Hey,
i´ve the same Problem.
I wanted to flash my MDA Vario, but it stops at 99%.
Now, I can´t start the phone and I can´t connect it to ActiveSync.
So I can´t flash it again.
When I want to flash an older ROM, there came a fail.
Sorry for my bad english I´m from Germany... I tried my best ;-)
FloStilo said:
Hey,
i´ve the same Problem.
I wanted to flash my MDA Vario, but it stops at 99%.
Now, I can´t start the phone and I can´t connect it to ActiveSync.
So I can´t flash it again.
When I want to flash an older ROM, there came a fail.
Sorry for my bad english I´m from Germany... I tried my best ;-)
Click to expand...
Click to collapse
Always post the vital data of the phone,which is your device,G3 or G4,post the present IPL/SPL...? of the phone.Which rom you were trying to flash ?Does your phone get into bootloaders (tricolor screen) ?
It won't activesync in bootloaders or in the absence of a working rom (OS),but its possible to flash a rom in bootloaders.Download the official rom from the carrier's site and flash in the bootloaders to recover back to its default status.
Cheers!
About a year ago I flashed my fresh p4350 with (if I well remember) Aserg's rom. I was quite a noob and I don't remember if there was any warning about the IPL<4 warning. So I got a brick ever since.
I just turns on and gets stuck on the white HTC logo, the boot with the camera button pressed works and appears "USB" on the bottom while line.
I looked for some fixes on this forum but I didn't see anything helpful.
Do you now how/if I can unbrick it?
Somewhere to start
Send it to me Ill fix it and use it...nah, Im just kidding. Try looking up hard slp, or you can put your phone in bootloader mode and flash a stock rom. But with Hard slp ur flashing from the sd after...should help you. Another suggestion is to take the radio out of the rom your flashing. Look all of this up, it may help you.
Your problem could be solved: You have to 1st) do a hard reset
then flash with original flashfile, and its done
I don't remember what I did last time I tried but it worked perfectly, I just opened the original updater
HTC_P4350_SPA_4.17.412.2_4.1.13.44_02.94.90_Ship.exe
when the phone was in the bootloader and it worked.
Well, now I need to change the language
I tried to HardSPL it now but it says that the image is corrupted, so I'm going to download it again and try again.
Thanks a lot!
.... unless anyone wants a P4350 in Spanish, pretty much new, unfortunately never used...
I did the HardSPL, and installed Touch-IT v4 just to see it. Now I tried to install the original Italian ROM
HTC_P4350_ITA_4.17.408.2_4.1.13.44_02.94.90_Ship.exe
it didn't work, the PDA restarted itself in the normal mode and the updater sais there was an error. Now I used the Touch-IT ROMUpdaterUtility with the Italian RUU_signed.nbh
It worked! Hope this would help someone else too
bayxsonic said:
I did the HardSPL, and installed Touch-IT v4 just to see it. Now I tried to install the original Italian ROM
HTC_P4350_ITA_4.17.408.2_4.1.13.44_02.94.90_Ship.exe
it didn't work, the PDA restarted itself in the normal mode and the updater sais there was an error. Now I used the Touch-IT ROMUpdaterUtility with the Italian RUU_signed.nbh
It worked! Hope this would help someone else too
Click to expand...
Click to collapse
Help........
I have the same problem, but I Danich......help me
sorry if this post seems to be a repeat , but i tried the search option and the results were not fruitful
a friend of mine , while trying to upgrade to a TNT ROM , didn't HardSPLed the device first , and successfully changed the ROM of the device , now it is stuck on the blue screen with SPL and IPL versions , and no response . for some reason , the device can go to bootloader mode , but it can not be reflashed , and it does not respond to a hard reset command.
please advise on what to do
regards
When it is in the bootloader mode, and connected via USB, is there a little USB icon in the bottom left? If so, simply flash your phones carrier ROM and all should be fine with it again. You can then apply HardSPL and flash to the TNT or any other ROM that you want to. Is your device a G3 or G4 by the way? What are the numbers after IPL and SPL?
well my friend says that the USB icon is visible there , and the device was indeed a G4. the thing is , what exactly should he do , in order to flash the ROM , since non of imate roms work for it. should he use any special software?
i'll greatly appreciate your help
Is he using Vista or XP?
he is using Windows XP , could it be the PC OS that caused interference?
Well, only if it is Vista does it really matter. He needs to get ahold of an original carrier ROM, such as the O2, or T-Mobile one and flash it to his phone, then HardSPL it, then upgrade to 6 or 6.1.
Download and flash Wizard_love Rom,it might do the trick,then HardSPL and upgrade to any wm6 or 6.1 rom.
What exact error it gives while flashing imate official rom ?
well the wizard has been an imate ,and it was flashed with an Original imate ROM already , but no success , any other suggestions?
thanks again
error [294]invalid vendor ID :
This Update Utility can not be used for your PDA phone.Please check your update utility.
here is the picture
http://i35.tinypic.com/29v03rl.jpg
and could you please give a link to the Love ROM?
thanks
Download wizard_love Rom from this link:-
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
No SD Upgrade even tough... MTTY hahahaha
king_dani said:
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
Click to expand...
Click to collapse
It seems you need to follow the drugstore MiniSD upgrade but...
I guess you dont have another wizard to make a bacuk up... so wait a minute...
You don have hardspled yopur device...!!!
HAHAHAHA forget it!mmmm
Maybe mtty... folow mi signature maybe works
See you There Men!!!!
Hi I have got a problem and i hope that you can help me
While flashing my X1 via USB there was an error message and flashing was interrupted.
I was doing the "recovery steps" that the programm gave me but it didn´t work.
When i started my x1 again there was the tri color screen.
(
RUUNBHKOVS110
SPL-0.72.OliNex
MircroP1-787
MircroP2-707
Upgrade ROM code error
Please try again_Nothing_
Serial)
I already used the board search and google but i cant fix it.
The Window Mobile Device Center isn´t connecting with my x1 and if i try to flash it again it stucks on 0% and after that there is again an error message.
Please help me
I dont know if it is important but i have got win7 x64
greetings
Try flashing with the sd-card method...
Apfeltorte said:
Hi I have got a problem and i hope that you can help me
While flashing my X1 via USB there was an error message and flashing was interrupted.
I was doing the "recovery steps" that the programm gave me but it didn´t work.
When i started my x1 again there was the tri color screen.
(
RUUNBHKOVS110
SPL-0.72.OliNex
MircroP1-787
MircroP2-707
Upgrade ROM code error
Please try again_Nothing_
Serial)
I already used the board search and google but i cant fix it.
The Window Mobile Device Center isn´t connecting with my x1 and if i try to flash it again it stucks on 0% and after that there is again an error message.
Please help me
I dont know if it is important but i have got win7 x64
greetings
Click to expand...
Click to collapse
As per what Lokatho mentioned,
in case you didn't know what it meant:
read that:
http://forum.xda-developers.com/showthread.php?t=445662
hope you could revive your X1.
Cheers!!
hmm ok i´ll try it :/
i hope that it works 'cus my X1 is new >_<
I'd suggest SD Method as well...
Additionally you could plug your X1 (while in three-color-screen, also known as Bootloader) inot your USB and start the RUU again.
Both should work.
@ wolf
I already tried it.
Everytimes the same error code something with connections problems don´t know why yesterday it worked :/
is this solved then?
Mod. edit: not dev related, moved to general