Related
I came across this while browsing the registry on my Wizard
Enter the following in the dialpad as if it were a phone number:
*#*#364#*#*
You will access an engineering page which shows the cell tower you're connected to, and a whole lot of other radio-related info.
It does'nt work on mine.
Juste type *#*#364#*#* and press talk ?
But, you can activate it, by launching \windows\GSMTestMode.exe
Running on WM6
You have to enable it from the registry too using most ROMs.
Worked for me... Kind of cool...
I noticed the RSSI on "neighboring cell information" Does anyone know how to actually get a real dbm signal level?
-Padawan
G3 Wiz100
Request
can someone up the .exe and tell me which registry key to change
Didn't need the exe or do any reg editing for it to work here...
Just key in the # sequence as you would dial a #.
Just my .02c.
padawan said:
Didn't need the exe or do any reg editing for it to work here...
Just key in the # sequence as you would dial a #.
Just my .02c.
Click to expand...
Click to collapse
You must make sure that "HKLM\SOFTWARE\HTC\EngineerMode\BuildInEngineeringModeApp" is set to "1"
TestMode / EngineerMode in HTC HD
I am very interested in this kind of functionality.
I have try dialing *#*#364#*#* but it does not work on HTC HD.
The \windows\GSMTestMode.exe is not in HTC HD
I could not find either the key "HKLM\SOFTWARE\HTC\EngineerMode\BuildInEngineering ModeApp".
Does anyone know how to activate it in HTC HD or an third party application?
so what
after change something in registry you have to make a soft-reset
it works but i can't do anything in this menus
atmospherico, do you mean it works for you in a HTC HD?
what was the way you use?
You were talking about changes in the registry but, at least in my HTC HD, there is no "HKLM\SOFTWARE\HTC\EngineerMode\BuildInEnginee ring ModeApp" key. How did you manage it?
You just have change with regedit the "BuildInEngineeringModeApp" Key to "1" in HKLM\SOFTWARE\HTC\EngineerMode\ than You just make a soft reset and type *#*#364#*#* (you can change it also with regedit) in your phonepad
but you can only look to the parameters its not possible to change it
it works with my wizzard an the CR86_Touch_HD_1.6_Fixed rom
I tested with the latest official ROM and it does nor work. I created the key and reset but at dialing I just get an error message from the operator
hey,
looking for a way to be able to dial a number off my contacts when using a calling card. ie, when i call the calling card, it tells me to enter the number i wish to call, so instead of having to hand dial it in there, is there a way i can just go to contacts and insert that number? seems silly that i have to write that number on a piece of paper and then hand dial it. thanks
omar
Insert a "w" into the number to have the phone stop and wait for you to press send to enter anything that follows. Insert a "p" to have the phone pause for 2 seconds and then chug along. So for your contact:
(Calling Card Co. Phone #)w(CC Access Number/PIN)#p(Contact Phone Number)#
would dial the calling card, wait until you pressed send, enter your access code/pin for the calling card followed by a pound sign, pause two seconds (so the system can do its thing), and then dial the contact number followed by a pound.
You'll obviously need to customize to match the way your particular CC works.
Is it a silly question to ask why you are using a calling card on a cellphone? Are there any plans left that don't include long distance?
I'll make my guess in two words - "International calls."
Either that or he's trying to hide those 1-900/976 calls from his gf/wife.
$2.99/min doesn't last long...
haha na guys, i'm calling international. much cheaper to use calling cards than to dial straight. i'm still at school, and i tried what you said, didnt seem to work, but i'll try it again once i get home. btw, its the type of calling card where my number is saved with them, so i call the card, and it automatically asks me for the number i wish to dial thanks
omar
Well the same dialing suggestions apply. Whatever you dial on your phone manually needs to be inputted using a 'w' for anything entered manually or a 'p' for a pause, which sounds like what you need. You can put multiple 'p''s for longer pauses like: 1234567890ppp12345 which would give you roughly a 6 second pause.
You can also try inserting commas, e.g:
18007777777,,,0119991234567
But I don't think you can tap a contact phone number and have it inserted mid-dialing stream. If the numbers you are calling will always use the calling card I would just save the calling card sequence as part of each of their numbers.
My personal recommendation is to use SunnySoft calling card and, if you are in the US calling internationally, GorillaMobile.
I'm originally from the UK and call the UK a LOT on my cellphone.
This combination makes it totally painless, just have the international contacts in the phone book as a regular contact (preceded by +44 in my case) adn just press dial. All completely seemless and Waaaaayyyy cheapper than AT&T (even reduced rate) International calling.
Just my 2c
This program could help solve the problem for you.
You can store you calling card and pin with this. Then, you can use contacts and select any phone number and you will see a "Call with calling card" on it.
I use this extensively.
Hope this helps
autosoori said:
This program could help solve the problem for you.
You can store you calling card and pin with this. Then, you can use contacts and select any phone number and you will see a "Call with calling card" on it.
I use this extensively.
Hope this helps
Click to expand...
Click to collapse
Very cool. Thanks so much for the binaries.
I think the source can be found here:
http://msdn2.microsoft.com/en-us/library/bb158783.aspx if anyone needs to tweak it. I went ahead and installed the signature (pulled a copy off the CAB in PK7 format), but I don't think it's required.
I've wrestled with it for a few days before I found a post claiming contention with the WM version of Google Maps. Sure enough, after uninstalling GMaps and and uninstalling and ReInstalling the callingCard cab, all worked well. I can live without GMaps.
Contrary to the doc, you can place symbols along with letters in your pin. Since I have to enter two pins with my card mine looks something like:
12223334567#pp1234#
That enters the first PIN (Account number) # then two pauses. Then it enters the second PIN (PIN) and #. I think reboots are required between regedits for this to work properly.
-Dan
Hello,
Thank you autosoori and Dan. I've added a very quick and dirty configuration GUI to it (its been a while since I've done any C++ programming to decided to use C# instead - apologies for the rubbishness on my part, but you will require .NET CF). The GUI is launched from the context menu in the Contacts list. Context sensitive help is provided within the app. Changed DLL so that device reboot is NOT required when registry changes are made.
I've only tested it on my Trinity running AX3L's WM6 ROM. Plan on adding support for multiple CC vendors (wife uses several calling card companies depending on destination). Apologies for the lack of clipboard support on edit controls.
Two files:
CallingCard.dll
CallingCardEdit.exe
I've wrapped them in a cab file. Alternatively, copy the two .exe's from zip to the original CallingCard's install dir; add a regstring in HLCU\Software\Microsoft\CallingCard called "ConfigApp" with the value being the full path to CallingCardEdit.exe; restart device.
Cheers
it works fine at my SX66 WM6, but only works with contact Menu than any other GUI .
hope for more functions
Changes requested
Hi,
My previous username was a bit non-random (for obvious reasons!), so I've changed it. Anyway, tell me what changes you want and I'll see if I can fit them in. If anyone wants the source, I can mail it to them.
autosoori said:
This program could help solve the problem for you.
You can store you calling card and pin with this. Then, you can use contacts and select any phone number and you will see a "Call with calling card" on it.
I use this extensively.
Hope this helps
Click to expand...
Click to collapse
I installed it and it's works fine, but today stopped work... the link appears, but I can't call with it. I tried to install it again... the same...
any idea?!
Here is a big problem I have with this CAB when used with GoogleMaps. If I install CallingCard AFTER GoogleMaps ... no Context menu for CallingCard appears in Contacts.
If I install CallingCard BEFORE GoogleMaps ... both GM and CC context menu appear, but when I select something like "Call work using calling card" it tries to use GoogleMaps instead
GREAT Application / New Features
GREAT JOB!!!
Thanks a lot !
works very well !
is there a way to use it with the call shortcuts for fast dialing ("numérotation rapide" in french) ?
it would be a very very very nice feature !!!
other options (less important, but pretty nice) :
1. ability to dial # after the "dial number"
2. in settings : ability to choose "0 secs" on each menu (pre-pin pause and pre-dial Pause)
Thanks in advance
thisisbil said:
Hi,
My previous username was a bit non-random (for obvious reasons!), so I've changed it. Anyway, tell me what changes you want and I'll see if I can fit them in. If anyone wants the source, I can mail it to them.
Click to expand...
Click to collapse
GREAT Application / New Features
I havent reviewed this app for a long time - apologies. I've moved calling card provider to one that gives me a local number for each of my international contacts - nice!
Anyway, if someone desperately needs some work on it, I will try to fit it in - let me know.
Phil82de: I noticed the problem with Google Maps. I will try to look into it.
samerweb: Again, I'll see what I can fit it. What exactly do you mean by call shortcuts? If you mean phone Quickdials, then you could save the number that is actually dialled directly as a contact. Can you clarify.
Thanks.
hi i have installed this file on my mobile, but can't find the setting. please help
I installed open touch 2.4 and LOVE IT.. it makes windows mobile so much useful..
one thing i found problamatic was the bluetooth profile. The problem is when I press the call button on my bluetooth headset it doesn't trigger the voice speed dial. It just launches the dialler which shows the keypad.
That kind of defeats the purpose of 'hands free' if I need to press the voice speed dial on the phone and then use the headset.
Any solution ? Or any other package I can install to get the full functionality of voice speed dial with bluetooth.
I have the same problem, and it effects the ability for me to use MS Voice Command. I wish someone would help, but I made a post about this and got no replies.
beowolf said:
I have the same problem, and it effects the ability for me to use MS Voice Command. I wish someone would help, but I made a post about this and got no replies.
Click to expand...
Click to collapse
guys,
I'm working on v2.5 and will try to resolve this issue if possible.
I need more details as to what is happening.
Also,
I did not see any of this nature posted in the original v2.2 post.
Who else is having this issue?
hoolahoous said:
I installed open touch 2.4 and LOVE IT.. it makes windows mobile so much useful..
one thing i found problamatic was the bluetooth profile. The problem is when I press the call button on my bluetooth headset it doesn't trigger the voice speed dial. It just launches the dialler which shows the keypad.
That kind of defeats the purpose of 'hands free' if I need to press the voice speed dial on the phone and then use the headset.
Any solution ? Or any other package I can install to get the full functionality of voice speed dial with bluetooth.
Click to expand...
Click to collapse
Just to cover all basis, did you setup the button 5 options?
Remember that I left the 5th button free for people to choose either voice record or voice speed dial.
Going forward, please do not create new post, instead post your issues in the original thread.
Thanks,
I'm pretty sure that what your dealing with is a registry problem. When i switched to touchit 2.3 i had to reconfig to the following:
1 Use registry editor to edit the following entries on your Wing:
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A udioGateway\, Modify Value data: OEMAGEX.dll to BTAGExtModule.dll
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: LaunchAPEnable, Value Data: 1
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: VoiceCmdEnable",Value Data: 0
2. Wait about 30 sec, then soft-reset
Try it and let me know how it goes. I dont get credit for this it is from a previous post. This did work for me tho. I can prompt the voice speed dial from the bluetooth.
ttran001 said:
guys,
I'm working on v2.5 and will try to resolve this issue if possible.
I need more details as to what is happening.
Also,
I did not see any of this nature posted in the original v2.2 post.
Who else is having this issue?
Click to expand...
Click to collapse
Thanks ttran for responding. I have great respect for you for putting together this great ROM.
The issue is..
I am pairing my bluetooth headset (motorola h850) with the phone. After paring, if I press the call button on my bluetooth, it is supposed to invoke the voice dial app in the phone and call the voice tag I spoke. However it just brings the phone dialler screen and does nothing.
My diagnosis
For an incoming call (when paired), I can pickup the call using bluetooth headphone's button. So I know bluetooth instrument is working.
Secondly when I directly invoke voice speed dial from phone (i mapped a hardware button to voice speed dial) it works fine too.
Only problem is I can not invoke voice speed dial from bluetooth headset.
Do not confuse this issue with the hardware button mapping since I am trying to invoke voice speed dial from bluetooth headset (not from hardware button on phone. that works fine)
Please let me know if you need any futher information. I will happy to provide any additional details.
BTW thanks again for putting together such a great ROM.
Hi,
Thanks for clearing that up.
Please try what mrmikemcguire posted:
1 Use registry editor to edit the following entries on your Wing:
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A udioGateway\, Modify Value data: OEMAGEX.dll to BTAGExtModule.dll
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: LaunchAPEnable, Value Data: 1
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: VoiceCmdEnable",Value Data: 0
2. Wait about 30 sec, then soft-reset
And let us know if it works for you, I don't use blue tooth so I can not test it for you.
Also,
Let me know if it fixes your issue so that I can add it to the next release.
Thanks folks,
sorry didn't work for me..
Ok.... First, thank you mrmikemiguire . Now hoolahoous .. did we make progress? The Audio gateway should be opening now... Verify that the registry modifications are correct in your device, then power cycle..... there may be another piece to the puzzle but those changes should work.
Edit: Final piece... Verify HKLM,"SOFTWARE\OEM\VoiceCommand "Path" = \Windows\SDDialer.exe
Okay.. thanks for everyone's help.. I finally got it to work... One thing incorrect in above settings was
\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A udioGateway\, Modify Value data: OEMAGEX.dll to BTAGExtModule.dll
the default entry was VCBTHAG.DLL not OEMAGEX.dll , I missed that..
however when I changed VCBTHAG.DLL to BTAGExtModule.dll , it started working..
ttran001, maybe you can include these entries in 2.5.
I know you are not planning to include voice speed dial or voice command in 2.5, I personally feel that you should include atleast one of them. My vote would be voice speed dial since it works for everyone but voice command works only for subset of people. When I say work, I mean software being able to recognize what a person is saying.
but thanks to everyone including mrmikemcguire to get it to work for me.
hoolahoous said:
Okay.. thanks for everyone's help.. I finally got it to work... One thing incorrect in above settings was
\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A udioGateway\, Modify Value data: OEMAGEX.dll to BTAGExtModule.dll
the default entry was VCBTHAG.DLL not OEMAGEX.dll , I missed that..
however when I changed VCBTHAG.DLL to BTAGExtModule.dll , it started working..
ttran001, maybe you can include these entries in 2.5.
I know you are not planning to include voice speed dial or voice command in 2.5, I personally feel that you should include atleast one of them. My vote would be voice speed dial since it works for everyone but voice command works only for subset of people. When I say work, I mean software being able to recognize what a person is saying.
but thanks to everyone including mrmikemcguire to get it to work for me.
Click to expand...
Click to collapse
Hi,
That reg fix has been added to v2.5 and yes Voice speed dial is included but not voice command since it takes about 4mb of space.
hoolahoous said:
Okay.. thanks for everyone's help.. I finally got it to work... One thing incorrect in above settings was
\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A udioGateway\, Modify Value data: OEMAGEX.dll to BTAGExtModule.dll
the default entry was VCBTHAG.DLL not OEMAGEX.dll , I missed that..
however when I changed VCBTHAG.DLL to BTAGExtModule.dll , it started working..
ttran001, maybe you can include these entries in 2.5.
I know you are not planning to include voice speed dial or voice command in 2.5, I personally feel that you should include atleast one of them. My vote would be voice speed dial since it works for everyone but voice command works only for subset of people. When I say work, I mean software being able to recognize what a person is saying.
but thanks to everyone including mrmikemcguire to get it to work for me.
Click to expand...
Click to collapse
Yep sorry about that.. I realized that when i did it, same occurance, but forgot to mention it! Sorry about that, but at least you got it squared away. Glad I could at least point you in the right direction.
mrmikemcguire said:
Yep sorry about that.. I realized that when i did it, same occurance, but forgot to mention it! Sorry about that, but at least you got it squared away. Glad I could at least point you in the right direction.
Click to expand...
Click to collapse
Either way thanks for providing feed back so to help resolve this issue.
I am using 2.5 slim and cannot get audio from realplayer, skype, etc.
I push the button and all I get is some wrong application, try again later errors....
Please help.
It all worked perfectly with the Clean ROM so may be someone with know-how can look at the registry differences between them and tell me if this is fixable, or i have to install the clean again...
Thank You!
#13 said:
I am using 2.5 slim and cannot get audio from realplayer, skype, etc.
I push the button and all I get is some wrong application, try again later errors....
Please help.
It all worked perfectly with the Clean ROM so may be someone with know-how can look at the registry differences between them and tell me if this is fixable, or i have to install the clean again...
Thank You!
Click to expand...
Click to collapse
Is this with bluetooth or the actual headset, or headphones?
And is anybody else having this issue?
Yes, BT.
Sorry i didn't mention this important detail.
Anyone been able to work a fix for this? WM 6 would underline numbers in received e-mail, calendar etc etc one could dial the numbers directly from within the mail?
The paste function has also been removed from the dialpad
ROM 1.37.421.3
This thread has an interesting solution.
http://forum.smartphoneexperts.com/showthread.php?t=165787&highlight=dial
Surur
this is bugging me bigtime!
im going try change the phone skin to the old wm6 version with advanced config, seeing as the function was there before on older phones then it should work here too.
can someone provide a solution??
The same problem for me.
I realized that when you have the status opened (it opens while you are talking) in the menu you have the paste option... but it is useless.
I also want to paste some numbers in the phone to call them... it is very annoying not to have this option (sometimes I need to copy also some numbers from internet pages... but now it is impossible!!!).
Can someone help?!?
Thnx.
Urosh
Hi Surur,
Good one thx for the link, i think this was a serious oversight from MS, this is the one reason i would chuck the phone.
So far i have enjoyed the phone, i think it works well, but as i said its virtually useless if you cant paste numbers on the dialpad.
This limitation is really annoying me now; and still, a month down the line it's the only unforgivable problem I have with this otherwise fantastic little phone.
I was hoping it was a simple oversight, and would have been fixed by now. Has any of the later ROMs addressed the issue? If not, has anyone came up with a solution, or at least a realistic work around that doesn't involve pen and paper?
for over 3 years i am using a dialer "contact breeze".
the dialer himself is also of value but i am reinstalling it each time only for this tweak. long press anywhere in a meeting or task and it will offer any of the telephone numbers in it. no need of any other spaces, tlf:, etc. just type the number and it will be offered for dialing after a long press. the prog cost a few $. it worth it!
Thanks, sounds like a usable work around, I'll check it out.
Still hoping for a real solution though... Anyone?
studz said:
Thanks, sounds like a usable work around, I'll check it out.
Still hoping for a real solution though... Anyone?
Click to expand...
Click to collapse
Yes. Anyone?
I got this ATT tilt one month ago. And want to set it up for one relative who is nearly blind but not deaf. So I am looking for a dialer program that can read any number key being pressed (e.g. one for 1) and repeat (pronounce) the whole number (e.g. 18006543210) when the call key is pressed. If the program can also read out the number that called in, then it will be perfect.
I guess these may not be hard for experienced programmer. Probably changing some sound files (.wav) may have this work. But I'm a newbie who know very little about programming for mobile phones.
If you know any solution, please let me know. Thanks a lot.
well...
I just did a software called DTMF Dialer, that does not do the same, but I guess I could hack it to dial the real number and say the numbers as confirmation, I am not a super duper C# coder but I think I can do it, if you are interested im me.
Microsoft Voice command is no good? One can simply call out the numbers to dial and it'll ask for confirmation.
telegraph0000 said:
Microsoft Voice command is no good? One can simply call out the numbers to dial and it'll ask for confirmation.
Click to expand...
Click to collapse
I agree with telegraph. Ms Voice command reads out the numbers as a confirmation, it also announces who is calling when a call is comming in.
For anyone who might be interested take a look at the link below. ATT is offering a deal for Mobile Speak to assist people with visual impairments for $89. The program usually costs a LOT more, so it is a great deal. Funny that I have not been able to find information on this on ATTs site...
http://www.windowsfordevices.com/news/NS5219435441.html
snowfedie said:
I got this ATT tilt one month ago. And want to set it up for one relative who is nearly blind but not deaf. So I am looking for a dialer program that can read any number key being pressed (e.g. one for 1) and repeat (pronounce) the whole number (e.g. 18006543210) when the call key is pressed. If the program can also read out the number that called in, then it will be perfect.
I guess these may not be hard for experienced programmer. Probably changing some sound files (.wav) may have this work. But I'm a newbie who know very little about programming for mobile phones.
If you know any solution, please let me know. Thanks a lot.
Click to expand...
Click to collapse
I do not whether this wil help- I use Sony Ericsson p990i - with it and P1 - one can dial by pressing the bluetooth button and say the contact's name of-course your sister should record it first (you must help her with that). The other positive thing is if a call comes in and it is in the contacts - then the caller/recorded name will be played back. I am also trying to help a blind guy - [email protected]