Database Develop

Is it possible to put the Qtek 9090 rom on a Qtek 2020 ?

Hi,
I just would like to know if it's possible (or if it's a stupid question) to put a rom of a Qtek 9090 on a Qtek 2020.
Why this question ? Because the Qtek 9090 have the same processor and (I suppose ) mainly the same hardware than the Qtek 2020.
Benefits of the manipulation : WM2003 SE, BT Widcomm stack, ...............
Did someone have this rom ?
If no, I have one

and you're still waiting to publish it !!

As far as I've seen QTEK9090 has a PXA27x CPU and 2020 is PXA263. Theoretcally it is possible to patch 9090 ROM so that it would not hang on our devices.

To freddyzaz
To freddyzaz
Tofreddyzaz
freddyzaz, if you really have this ROM from Qtek 9090 - please post it, so we can see what can be done with it.

Can you upload the ROM of qtek 9090??
@ freddyzaz
Please, can you upload the ROM of Qtek 9090 in this forum?
I would like to try it anyway with my MDA II
Thanks,

Hi,
I've posted the Qtek 9090 rom. Enjoy it, and please post your results here

Re: Can you upload the ROM of qtek 9090??
van said:
@ freddyzaz
Please, can you upload the ROM of Qtek 9090 in this forum?
I would like to try it anyway with my MDA II
Thanks,
Click to expand...
Click to collapse
Hi Van,
I will try it for you and will add comment to XDA-Forum,
For O2 XDA-II -> everything is possible .... like mission imposible ... and make it avaible.
Mentioned ideas the same with mine, ... we will use O2 XDA-II or XDA-II(i) or XDA-II(s) or XDA-III ??? where the core hardware inside is not much impressive.
Chim sao / VHS

mamaich said:
As far as I've seen QTEK9090 has a PXA27x CPU and 2020 is PXA263. Theoretcally it is possible to patch 9090 ROM so that it would not hang on our devices.
Click to expand...
Click to collapse
Wrong my Qtek 9090 has a PXA263 400Mhz...

from the registry I noticed a difference in the bluetooth device:
qtek2020:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\ASIC5_BTUR]
"DeviceArrayIndex"=dword:00000000
"DeviceType"=dword:00000000
"Dll"="ASIC5_BTUR.Dll"
"FriendlyName"="BT on COM6:"
"Index"=dword:00000006
"IoBase"=dword:afe00700
"IoLen"=dword:00000024
"Irq"=dword:00000022
"Order"=dword:00000002
"Prefix"="COM"
"Tsp"="Unimodem.dll"
qtek9090:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BlueTooth]
"DevConfig"=hex:20,00,00,00,05,00,00,00,10,01,00,00,00,4b,00,00,00,00,08,00,\
00,00,00,00,00
"DeviceArrayIndex"=dword:00000000
"DeviceType"=dword:00000000
"Dll"="Serial_BTUR.dll"
"FriendlyName"="BT UART"
"Index"=dword:00000004
"IoBase"=dword:aa050000
"IoLen"=dword:00000024
"Irq"=dword:00000011
"Order"=dword:00000002
"Prefix"="COM"
"Tsp"="Unimodem.dll"
different iobase, different drivers.
I don't have a qtek9090, so can only look at the binary for differences.

It's normal because the 2020 has a MS drivers/stack whereas the qtek 2020 has a WidComm drivers/stack but the drivers file has the same name.
In the Qtek 9090 :
"Bluetooth for Windows CE BT-PPC/PE Version 1.0.0.1900"

I need the password for this ROM... :roll:

Try to flash ROM- Qtek 9090 for MDA II
I have been trying flash ROM- Qtek 9090 for MDA II but no success :evil:
1. Copy NK.NB1 to the SD card
2. Enter bootloader mode
3. Hook up a terminal on the serial line
4. Insert SD card
5. Type 'S2d'
Nothing
Any Ideas ???

I dont think just flashing the qtek 9090 rom will do the trick.
there's just to much difference between the devices.
but I'm looking forward to you guys getting this done. there are so many freaks around here

off topic
@JRC
Where did you get the Qtek 9090? And how much did you pay for it.
I would like to buy one, but here in Belgium or the Netherlands, they still not available

freddyzaz: Could you please download all 3 ROMs (OS ROM, Extended ROM and Radio ROM) and post it here?
itsme: Could you please create the .nbf files when freddyzaz will post the ROMs here?

Sorry, I can't. The 9090 was just for a test, and I've not the possibility to have it again.

Aarrrgghhh... That's bad, that's bad...
I think we need all these tree ROMs backups, 'cause I'm "sure" RadioROM is little bit changed (updated?)... And ExtROM we need for great new versions of included SW, of course...
But I hope, if we get these ROMs someday and try to flash them, it should work in Himalaya as Himalaya & Blue Angel are different only in keyboard and WiFi, the rest should be same (CPU, RAM etc...)

As far as I see 9090 uses a different BT chip: BRF6100, that is probably incompatible with ours. Display hardware is also different - when I've replaced ace_ddi.dll with this - my iMate hanged on startup. Camera is also incompatible - the 9090 application crashes at start.

i think it's not the right way by trying to get the whole thing working with the qtec 9090 images but to extract the wm2003 system.
so we get a completly "naked" system in which we can load our old software and drivers from the qtec 2020.
I guess that's the way to get started on this.

ROM Qtek 9090
Flashing error again
I think that we need WM 2003 SE and smart bluetooth profile supported PAN. Some months ago nick HTC already had test ROM with WM 2003 SE and it is working. Now Tmobile and mmO2 have tested ROM and we have to wait for launch MDA III fist in Nov. :wink: then the upgrade 2003 SE will be posted?
May be somebody can share the beta upgraded ROM WM 2003 SE here???
Thanks

Rom Upgrade for PDA2k

Hi, I have a pda2k and am trying to work out which is the best Rom version to upgrade to. I have tried to work this out from the wiki and other posts but am still unsure, and am slightly nervous! I also cannot find many posts from other people who have upgraded pda2ks.
The versions I am currently running are below.
ROM Version: 1.12.22
Extended ROM version: 1.12.169
Radio Version: 1.02.00
Is this latest Imate rom (i-mate_PDA2k_WWE_12200_162_10600_SHIP.exe) the best one to install or would something like the 1.33 Siemens rom be better (would it work on this device)?
Thanks

Pda2k rom upgrade
A new rom upgrade is available at www.clubimate.com.

Thanks Junie, the rom I refer to in my post is the latest English rom on the clubimate website. I was wondering if that was the best one to install.

Well Wiki says that the highest is the imate 1.31 (Arabic) with radio 1.06.02 and cooking your own exteneded rom.
It does not tell you how to use the siemens rom as nobody has posted to the "List of know Blueangel, sold as, Model ID, Operator code ect" thread.
But you can read that siemes thread to work it out.
Wiki does tell you how to fix the probem of lack of a camera with the siemens rom if you went that way.

thanks mda. I think I am going to go with the 1.22 imate rom with my own extended rom.

Don't forget the 1.33.10 upgrade from the SX66 Update made possible for PDA2K by mamaich! I used that plus the Camera reinstate CAB file I made and my PDA2K nicely. I am now getting proper voicemail notification icons on Cingular's network.

Yes, I have been looking at that. One thing I noticed is that there is no ms_.nba. This means that the fix.bat gives me errors. Is this normal?

The mamaich hack version is only the os, this is due to the fact that the ext rom is someting that you should cook your self and that the radio is outdated.
The original rom was made with the new encription, mamaich! reboxed it so that it would work with the tools.

I too have a PDA2K and am running the 1.33.110 WWE Siemens rom with 1.06.02 radio from the qtek rom, and I applied the Wlan patch, the 3900 build upgrade, and the camera patch, and all is well.I get good b/t range now (25ft) and the wifi does not disconnect me.I just put on the O2 plus cab too,and it seems to be alright.I like the Icons,but it does slow the unit down a little sometimes.
Later....... 8) 8) 8)
d0z3y said:
Hi, I have a pda2k and am trying to work out which is the best Rom version to upgrade to. I have tried to work this out from the wiki and other posts but am still unsure, and am slightly nervous! I also cannot find many posts from other people who have upgraded pda2ks.
The versions I am currently running are below.
ROM Version: 1.12.22
Extended ROM version: 1.12.169
Radio Version: 1.02.00
Is this latest Imate rom (i-mate_PDA2k_WWE_12200_162_10600_SHIP.exe) the best one to install or would something like the 1.33 Siemens rom be better (would it work on this device)?
Thanks
Click to expand...
Click to collapse

Please tell me which Bluetooth headset works best with your PDA2K. We have matching versions on everything, but I can't get more than 3 feet line-of-sight away from my PDA2K with my HS810 or my Meritline Bluetooth headset. Almost makes me think the BT on this phone is useless.

ok, flashed the siemens bios with radio. works great and was much easier than I thought!

BeyondtheTech said:
Please tell me which Bluetooth headset works best with your PDA2K. We have matching versions on everything, but I can't get more than 3 feet line-of-sight away from my PDA2K with my HS810 or my Meritline Bluetooth headset. Almost makes me think the BT on this phone is useless.
Click to expand...
Click to collapse
Nice setup you have there, BeyondtheTech...!
How do you like your system at the moment? Is this setup working for you and is the iMate stable? If so, would you mind uploading your CABS, so I can play with them as well?
As far as BT, I upgraded to 3900, was not satisfied, BT headset got worse. Then I bought a new headset (Logitech, BT supporting version 1.2), downgraded to 3500, applied the patch, and all seems ok now.
Hope that helps ya!

I am using a Motorola HS820. I was using a jabra,but it sucked! I got my radio from the Qtek 1.22.167 WWE rom.It seemed to be better than the radio in the 1.22.557 rom for some reason. It is very stable now.
At about 15ft the b/t starts to get a little bit of static,but is clear enough to use easily. At 25ft you are at the end of you're USABLE range,tho!
Hope this helps......Later
[quote="BeyondtheTech" ]Please tell me which Bluetooth headset works best with your PDA2K. We have matching versions on everything, but I can't get more than 3 feet line-of-sight away from my PDA2K with my HS810 or my Meritline Bluetooth headset. Almost makes me think the BT on this phone is useless.[/quote]

hdbueller said:
I am using a Motorola HS820. I was using a jabra,but it sucked! I got my radio from the Qtek 1.22.167 WWE rom.It seemed to be better than the radio in the 1.22.557 rom for some reason. It is very stable now.
At about 15ft the b/t starts to get a little bit of static,but is clear enough to use easily. At 25ft you are at the end of you're USABLE range,tho!
Hope this helps......Later
Click to expand...
Click to collapse
I would love to try your solution!
Did you install the complete 1.22.167 WWE ROM or did you extract the radio.nbf and replaced it with the one on your OEM ROM?

I had been using the 1.22.167WWE Qtek Rom w/1.06.02 when the Siemens Rom came out,so the radio was the easy part. The rest,I read and got alot of help.....LOL
Later 8) 8) 8)
HappyGoat said:
hdbueller said:
I am using a Motorola HS820. I was using a jabra,but it sucked! I got my radio from the Qtek 1.22.167 WWE rom.It seemed to be better than the radio in the 1.22.557 rom for some reason. It is very stable now.
At about 15ft the b/t starts to get a little bit of static,but is clear enough to use easily. At 25ft you are at the end of you're USABLE range,tho!
Hope this helps......Later
Click to expand...
Click to collapse
I would love to try your solution!
Did you install the complete 1.22.167 WWE ROM or did you extract the radio.nbf and replaced it with the one on your OEM ROM?
Click to expand...
Click to collapse

Where can I get Siemens SX66 ROM , modified by Mamaich, to update my PDA2K ROM ?

Got trashed on ftp wipe out, we dont have it any more

MDAIIIUser said:
Got trashed on ftp wipe out, we dont have it any more
Click to expand...
Click to collapse
So, we have to wait for somebody to re-upload it ^^

bluethooth

Hello
i have pda2k with
Rom version 1.12.22wwe
Rom date 09/27/04
Radio version 1.02.00
Protocole version 1337.32
Ext Rom version 1.12.171 wwe
Bluetooth version1.0.0 build 2200
I don t have probleme with my pda2k but the only one probleme is my bluethooth it doesn t work i can receive file but when i active to find device it didn t find anythink please can you help me thanks

the only rom which can fix xda IIs no sound problem

after lots of reading, it seems that the most stable and the only rom version which can solve "no sound" problem is this one: ba_1.33.51_with_wmp10_cooked_by_mamaich_final.rar
but the file is missing in ftp? can anyone please help re-upload? thx!
also to mamaich:
I read one of your thread about no sound problem and it says:
"You don't need to softreset your phone. You can just turn flight mode on and off.
Currently I have 1.33.51 (my cooked) ROM, 1.10 radio, BT build 3900 and several fixes installed and have not noticed such problem for a long time. Last time I had such problem I was running 1.31 ROM, 1.06 radio and old 3500 BT stack. Maybe BT 3900 or some other update fixed that.
_________________
Imate PDA2K (PH20B)
ROM: 1.40 WWE fixed
Radio: 1.12.00
ExtRom: Used as storage
BT: 1.0.0 build 3900"
and wondering your signature says you're using 1.40? and what's "fixed" in 1.40 WWE fixed means? this fix can solve no sound problem?
in short, do you encounter no sound prolem using bt headset with this rom? if no can you upload your rom to ftp and share with us?
deeply troubled by this problem! T__T thx for your help

Upgrading Qtek 9100 with i-mate K-JAM ROM

Hi,
Did anyone tried upgrading a Qtek with club i-mate new roms?
Do we need a "NoID" file?

michar said:
Hi,
Did anyone tried upgrading a Qtek with club i-mate new roms?
Do we need a "NoID" file?
Click to expand...
Click to collapse
I am wondering about it too. BT on imate version is much stronger than QTEK

What are differences between I-mate and Qtek ROMs in part of BT functionality. Does voice dialer via BT headset on Imate ROM starts when device is off?

ID64 said:
I am wondering about it too. BT on imate version is much stronger than QTEK
Click to expand...
Click to collapse
how to reset imate k jam