Related
I'd bought my htc p3600 pro (black, free from sim-lock & free from any carrier) from London.
As advised by TRINITYGUIDES.INFO site I tried to do HardSPL with all the three available HardSPL files, but of no avail.
When the HardSPL's progress bar comes(on pc) it gives a message on my phone " Enterbootloader.exe....This may harm your device...Do you want to continue.." I pressed yes & the process stopped & gave an error on pc "Error 246 Device not responding" & on phone screen showed the bootloader with
TRIN100
IPL-SSPL by Des
TRIN100
SPL-1.07.ds
I did soft reset on my p3600 & its working as usual with it original spl infos.
I want to put official WM6 SEA version(ROM+RADIO) on my phone...Please help.
I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks
wingnutLP said:
I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks
Click to expand...
Click to collapse
Search is great function
http://trinityguides.info/index.php?option=com_content&task=view&id=37&Itemid=67
wingnutLP said:
Sorry!
I am an idiot.
Thanks
Click to expand...
Click to collapse
sorry I tried a Google search on the error message and came up with this thread!
wingnutLP said:
sorry I tried a Google search on the error message and came up with this thread!
Click to expand...
Click to collapse
Search more...
With this link:
http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
if you search error 246 you will get the solution on 11th answer.
Search more...
Have the same [Error 246]! How can I definitly fix it?
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo
Some specifications....
Sorry.... I have a P3600 White with Olipro 1.20 and rom Elias 1.9 SE Lite...
Tompo81 said:
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo
Click to expand...
Click to collapse
Before flash manually enter bootloader. After start the rom update utility. (As www.trinityguides.info suggest). You will not get error 246 any more
thanks for answer
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo
Tompo81 said:
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo
Click to expand...
Click to collapse
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)
Ok, now I really understand
Ok, this is a very good anwser, short and clear... thanks...
Ciao
Tompo
fktsndr said:
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)
Click to expand...
Click to collapse
When i connect my touch hd to pc in active sync mode, then shutdown device an run in bootloader (volume down and power button at same time) i get the tricolor screen and after a while i get the progress bar on my phone and on pc. But i stays on 0% and says 'update error' after a while.
please help
I Have the Same Problem the Status bar Freeze On 0% and nothing happened
Until the Update Error Message Displayed
Please Advice
Thank You
Note: I Have HTC Diamond2 (Topaz) Without Sim Louk
Hi Me has the trinity 3600 as a VPA GPS vodafone branding, and i get the same error message trying to run the bootloader and entering tricolor screen, ---> error 246 aber manually starting into bootlaoder and restatrting the romupdateutil.exe same error 260 no connention...
So you guys have a working version of the updating ?
And please remove all the links which are not working, linking a solve for the 246 problem, there are nomore links available...
thanks
Dome
I found a way to solve the problem 246 go in you mobile device, -->start -> settings-> connections ->USB to PC open this. Remove the hook @ Advanced networksettings activation! ---> click OK--> close
try again the bootloader etc, then on the tricolore reboot screen is shown USB in the lower white field and the bootloader can do its routine complete.
Have Fun with flashing the phones!
Testet with original German Vodafone available ROM " vpa_comp_gps_RUU_Trinity_VF_DE_1_23_162_4_6275_1_29_00_01_13000_108_Ship.exe "
testet with ZackMcRofls superfast german rom " RUU_Trinity_GER_1.23.162.2_GPS_v3f_by_ZakMcRofl "
testet with
" htcp3600_RUU_Trinity_HTC_GER_1-23-407-2_103_6275_1-38-00-11_108 "
First was Zack´s rom, 2nd. was Original Rom, 3. was Trinitys rom, after trxing all, i flashed Zacks Rom again, it was the best in my view.
Thank you verymuch, bb
I case of people who don´t read 200 post and still brick their device - here is the guide that worked for ALL people with:
HTC P4350
XDA Terra
WING
with IPL 4.xxx and higher!!! (that is IMPORTANT)
and then follow this:
Default
For me it was working when:
1. install canonyang.cab
2. install aserpolicy.cab
3- install disablesecurity.cab
4. SOFTRESET
5. run RUU from Hard-SPLWM6 folder verison 4.70.yang
6. screen will become white - WAIT until it reboots itselfe.
7. done!
check if SPL now is 4.70.yang
Fore sure: I used this
http://rapidshare.de/files/38148213/HardSpl_WM6.rar.html
mirror: http://www.sendspace.com/file/ot8zsn
It worked for many others, too.
b.mann said:
I've figured my issue out, maybe I can help the others that get the 202 Connection error.
On your device--BEFORE Hard-SPL--go to Settings->Connections->USB to PC and check that checkbox.
If it's not checked, most times you will get the 202 Connection error. Hard-SPL and you should be good to go!!
Click to expand...
Click to collapse
You may add Dopod C800 to the list
It's the real deal
Succesfully flashed my device under papamopps supervision and can verify that this HardSPL package is working 100%
Thanks again papamopps
heya, seems like i'll get my terra flashed then too. Nice one. Well, at least to some point...i almost fear to ask...how do i see if i have "IPL 4.xxx and higher"?
I've got Rom-version 4.11.207.1 GER, Protokoll-Version 4.1.13.39
TIA for help
*BTW, the rapidshare-link tells me "file not found".
stahlsau said:
heya, seems like i'll get my terra flashed then too. Nice one. Well, at least to some point...i almost fear to ask...how do i see if i have "IPL 4.xxx and higher"?
I've got Rom-version 4.11.207.1 GER, Protokoll-Version 4.1.13.39
TIA for help
*BTW, the rapidshare-link tells me "file not found".
Click to expand...
Click to collapse
Softreset your Herald and press the Camara butten until you see an Colerd screen it´s the Bootloader. there you will find the IPL and SPL on the screen. softreset your herald without pressing any butten and it will start normely to youre WM. You wont delete any data aslong you nothing Flash.
Ghostrider
stahlsau said:
heya, seems like i'll get my terra flashed then too. Nice one. Well, at least to some point...i almost fear to ask...how do i see if i have "IPL 4.xxx and higher"?
I've got Rom-version 4.11.207.1 GER, Protokoll-Version 4.1.13.39
TIA for help
*BTW, the rapidshare-link tells me "file not found".
Click to expand...
Click to collapse
link updated!
Thanks!!
yew i am hardspl but it change my boot screen oooo i have to reflash nvm
aron4588 said:
yew i am hardspl but it change my boot screen oooo i have to reflash nvm
Click to expand...
Click to collapse
could you shareyour device information-so that we can see for which device it is working?!
It worked on my:
HTC p4350
It had: WM6 overclocked to 299Mhz (but i let it on Default 201Mhz When I was in de process)
It had de 4mb Page Pool.
Worked great!!! THanks man!
BTW- afteryou have Hard-SPL.
Never use an official RUU with included SPL.nbh (delete this ebfore flashing)
And never use the RUU from Hard-SPL
Allways use the included RUU or take an RUU without SPL.bnh when you onlycan download the ruu_wigned.nbh.
Regards
how to go back to stock?
i currently have hard spl with touchit 4.4
i want to go back to factory spl and factory ruu
can someone please help me?
thank you
i did it with t-mobile wing usa
aron4588 said:
i did it with t-mobile wing usa
Click to expand...
Click to collapse
I also was able to Hard-SPL my T-Mobile wing successfully in the US
and....
in the past ive always went stock b 4 flashing a new rom
what are the steps now to change to new roms? wheather it b hard spl or factory spl
thanks
I am waiting from 20 minutes with my phone in white screen mode... is it normal?
EDIT: ehm... please... im am quite worried. (30 minutes in white screen :S)
johnny88 said:
I am waiting from 20 minutes with my phone in white screen mode... is it normal?
Click to expand...
Click to collapse
it should end after 10 or 15 minutes.
hope you installed all files before and softreset.....
yes all cabs...
during the install of hardspl the ruu install wizard shows a windows with "connection failure" and only an Exit button. I click on it while it is in white mode... I am still waiting...
What should I do? (wainting or reset?)
finally (after 40 minutes of white screen) I softreset with stylus...
It reboots normally as nothing was appened... better then brick.
I will try again later.
THX!
hi
when HTC P4350 is into bootloader mode, SPL and IPL are 1.08.0001
is it an older SPL or waht?
if yes can i update my P4350 to WM6 without using Hard-SPLWM6 ??
any idea?
anyone have a link to learn what's is exactly hard SPL, and the difference between HARD SPL and SOFT SPL
thx in advance
br
BouRRi_GSM said:
hi
when HTC P4350 is into bootloader mode, SPL and IPL are 1.08.0001
is it an older SPL or waht?
if yes can i update my P4350 to WM6 without using Hard-SPLWM6 ??
any idea?
anyone have a link to learn what's is exactly hard SPL, and the difference between HARD SPL and SOFT SPL
thx in advance
br
Click to expand...
Click to collapse
allways start with :
http://forum.xda-developers.com/showthread.php?t=327046
and then try one of this:
http://forum.xda-developers.com/showthread.php?t=358030
first the official one....
and read- read - read
hi all
i have htc wing220 work ok ...but i try to update rom by this
RUU_Wings_HTC_WWE_1.31.405.1R_radio_sign_25.62.30.03_1.58.17.02_Ship
rom start update arrive 17% lcd change bot mode
details on lcd
WING220
SPL-1.31.0000
CPLD-7
then i try by another rom used this
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_64.08.21_CubeV2_
update hang then need recovery i start recover back to start first step also hang
i back by first rom agin ...start 1% phone disconnect from pc then back connect
see error measge
INVAILD VENDER ID
i try by another rom use this
RUU_Wings_HTC_WWE_1.21.405.0_R_radio_sign_25.47.20.01_1.58.09.17_Test.exe
get same error
INVAILD VENDER ID
PLSANY ONE CAN HELP ME ABOUT THIS PROBLEM WHICH ROM CAN SOLVED THIS PROBLEM
THNKS FOR ANY REPLY
the ROM you are using is for HTC WINGS (HTC S730)
You have the HTC WING, you are using the incorrect ROM
fogleroller said:
the ROM you are using is for HTC WINGS (HTC S730)
You have the HTC WING, you are using the incorrect ROM
Click to expand...
Click to collapse
ok..now what doing
which rom used pls upload correct rom to solved my problem
odayking said:
ok..now what doing
which rom used pls upload correct rom to solved my problem
Click to expand...
Click to collapse
Hard for us since this is not the forum for your phone. I believe your's is called the Herald? They should be able to provide you a rom that you can update with
Like a fish in his own water.
What you have is a Herald.
Go to this.
And don't come back before buying a wings, or you have something to report or ask about the wings.
Groetjes,
Niels
Hi all,
This morning I wanted to flash the new HTC ROM.
Flashed: RUU_BlackStone_HTC_WWE_EastEurope_1.14.479.3_Radio_52.49a.25.26_1.09.25.14_Ship (Succesfull)
Restore_Stock_SPL_114_2.zip (Succesfull)
But then my deviece rebooted and now it shows:
BLAC100 32M
SPL-1.14.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error, Please Try Again.
____________________________________________________________
Blackstone_CustomRUU_v1.0
Gives me Error: 292 Invalid Vender ID
HDa4-BMCF5567-HUEbc568-BMCF55670
____________________________________________________________
I tried USPL but gives a error that deviece is not responding
I tried several spl's, nothing hard spl, nothing...
Several coocked and shipped roms nothing...
Some cases it goes to flashing screen but stays at 0%
and some cases it goed to flashing screen goes to 1% and then gives the error...
Can someone help me?
have you just tryed with mtty tool ?(it reset you doc),it works with jasjar.
babak said:
have you just tryed with mtty tool ?(it reset you doc),it works with jasjar.
Click to expand...
Click to collapse
Babak jan,
mtty khatarnak hastesh....
mikham yek lahze waysam.
EN:
Mtty is kinda dangerous,
I'ma wait for some other tips before using mtty.
xmoo said:
Hi all,
This morning I wanted to flash the new HTC ROM.
Flashed: RUU_BlackStone_HTC_WWE_EastEurope_1.14.479.3_Radio_52.49a.25.26_1.09.25.14_Ship (Succesfull)
Restore_Stock_SPL_114_2.zip (Succesfull)
But then my deviece rebooted and now it shows:
BLAC100 32M
SPL-1.14.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error, Please Try Again.
____________________________________________________________
Blackstone_CustomRUU_v1.0
Gives me Error: 292 Invalid Vender ID
HDa4-BMCF5567-HUEbc568-BMCF55670
____________________________________________________________
I tried USPL but gives a error that deviece is not responding
I tried several spl's, nothing hard spl, nothing...
Several coocked and shipped roms nothing...
Some cases it goes to flashing screen but stays at 0%
and some cases it goed to flashing screen goes to 1% and then gives the error...
Can someone help me?
Click to expand...
Click to collapse
USPL was not working for me when I needed to use it to upgrade the ROM on my touch hd.
What I did was run it on Windows XP instead of Windows Vista and the device responded.
Install ActiveSync 4.5 on Windows XP, disable USB connection in ActiveSync settings, and connect PDA to computer via USB whilst the PDA is on bootloader.
Then run USPL.
prank1 said:
USPL was not working for me when I needed to use it to upgrade the ROM on my touch hd.
What I did was run it on Windows XP instead of Windows Vista and the device responded.
Install ActiveSync 4.5 on Windows XP, disable USB connection in ActiveSync settings, and connect PDA to computer via USB whilst the PDA is on bootloader.
Then run USPL.
Click to expand...
Click to collapse
Well the first try failed.
the phone didn't get connected to xp (using vmware)
So gonna try @ home.
I'm going to try this:
No connection, wait 5 min, than put battery back and preform a HR.
xmoo said:
Well the first try failed.
the phone didn't get connected to xp (using vmware)
So gonna try @ home.
I'm going to try this:
No connection, wait 5 min, than put battery back and preform a HR.
Click to expand...
Click to collapse
This didn't help......
Gonna try the xp method when I get back 2 home
xmoo said:
This didn't help......
Gonna try the xp method when I get back 2 home
Click to expand...
Click to collapse
You tried flashing your carrier's stock ROM (if available)?
Ta
Dave
DaveShaw said:
You tried flashing your carrier's stock ROM (if available)?
Ta
Dave
Click to expand...
Click to collapse
This was unbranded.....
But going to try to flash the dutch rom.
Funny thing is sometimes it starts flashing but after 1% the screen goes black and back to home menu of bootloader.
Most of the times it just stays @ 0%
xmoo said:
This was unbranded.....
But going to try to flash the dutch rom.
Funny thing is sometimes it starts flashing but after 1% the screen goes black and back to home menu of bootloader.
Most of the times it just stays @ 0%
Click to expand...
Click to collapse
Fire up MTTY and do an "info 2". It should give you the CID of the device - try and find a matching Ship EXE for that CID.
*Instructions for MTTY are in the Kaiser Stuck in Bootloader link in my sig BTW.
Ta
Dave
DaveShaw said:
Fire up MTTY and do an "info 2". It should give you the CID of the device - try and find a matching Ship EXE for that CID.
*Instructions for MTTY are in the Kaiser Stuck in Bootloader link in my sig BTW.
Ta
Dave
Click to expand...
Click to collapse
I don't know if it is you or what else.
This time bootloader said loading.....
While loading I ran the dutch rom update.
And now it's flashing.
IT WORKS!!!!!
RUU_BlackStone_HTC_NLD_1.14.404.3_Radio_52.49a.25.26_1.09.25.14_Ship
xmoo said:
I don't know if it is you or what else.
This time bootloader said loading.....
While loading I ran the dutch rom update.
And now it's flashing.
IT WORKS!!!!!
RUU_BlackStone_HTC_NLD_1.14.404.3_Radio_52.49a.25.26_1.09.25.14_Ship
Click to expand...
Click to collapse
The dutch image must match the CID / Model on your device.
Glad it's sorted.
Dave
xmoo said:
Babak jan,
mtty khatarnak hastesh....
mikham yek lahze waysam.
EN:
Mtty is kinda dangerous,
I'ma wait for some other tips before using mtty.
Click to expand...
Click to collapse
Khosh hala ke hal shod moshkelet ham shahri
Eng: I am very pleased that you resolved
xmoo said:
Hi all,
This morning I wanted to flash the new HTC ROM.
Flashed: RUU_BlackStone_HTC_WWE_EastEurope_1.14.479.3_Radio_52.49a.25.26_1.09.25.14_Ship (Succesfull)
Restore_Stock_SPL_114_2.zip (Succesfull)
But then my deviece rebooted and now it shows:
BLAC100 32M
SPL-1.14.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error, Please Try Again.
____________________________________________________________
Blackstone_CustomRUU_v1.0
Gives me Error: 292 Invalid Vender ID
HDa4-BMCF5567-HUEbc568-BMCF55670
____________________________________________________________
I tried USPL but gives a error that deviece is not responding
I tried several spl's, nothing hard spl, nothing...
Several coocked and shipped roms nothing...
Some cases it goes to flashing screen but stays at 0%
and some cases it goed to flashing screen goes to 1% and then gives the error...
Can someone help me?
Click to expand...
Click to collapse
I have the same problem only my message reads
RUUNBH
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error, Please Try Again.
Glad to read you resolved your problem however I'm stuck please help any advice would be apprecaitted
in mtty, command: set 16 0
will fix it
riz157, try flashing with the original shipped rom the device came with. i had this problem a few days ago. it took a while to work out. the shipped rom did the trick for me.
Oh man
I think I also screwed up my HD. It is stuck on Loading... screen. Won't connect to pc. Can not flash anything to it. Restores ok but after reset it shows "update rom code error,please try again" and then next screen shows Loading... for ever.
Please help me guys.....
Thanks a lot
i have the same problem, upgrade rom code error spl-1.54.0000
please can you help me
thank you
alex5552 said:
i have the same problem, upgrade rom code error spl-1.54.0000
please can you help me
thank you
Click to expand...
Click to collapse
Flash the original rom what came with ur Touch HD!
xmoo said:
Flash the original rom what came with ur Touch HD!
Click to expand...
Click to collapse
what if you dont remmember what was the original one =)
i tryed to delete the HSPL
by hardboot via SD ( LEOIMG )...
i got the same problem ...
with the message:
Upgrade ROM code error, Please Try Again.
1) i took out the SD from the Device
2) pulled out the battery 5 sec wait ...
3) put it back ... Push power button ...
4) on the exclamation mark screen ( after it loads )
5) reinstall the HSPL ...
and wm workes again ....
BUT STILL ....
how can i delete the HSPL properly and put a OWWE on my device.
Tictac0566 said ones i have : ( the original that was on my device )
Quote:
"Well, at least the ROM version is the official Hong Kong ROM for the HD2, including the Radio ROM version."
where to get the Hong Kong ROM =)
RUU_BlackStone_HTC_NLD_1.14.404.3_Radio_52.49a.25. 26_1.09.25.14_Ship
Where can I download this ROM
Rapidshare don't have it no more
Can someone upload this 4 me please
Thanks
after installing RC5 23698 Multi-Rom my XDA lls stuck on 4colored screen and dosent load windows i tried to install other roms they all install successful but they all get stuck at the 4 colored screen i tried to downgrade to wm2003se official rom but they all gave me error PLEASE HELP me
rojblake said:
after installing RC5 23698 Multi-Rom my XDA lls stuck on 4colored screen and dosent load windows i tried to install other roms they all install successful but they all get stuck at the 4 colored screen i tried to downgrade to wm2003se official rom but they all gave me error PLEASE HELP me
Click to expand...
Click to collapse
Use MY UPDATER AND ALL WORKS FINE!
d-two said:
Use MY UPDATER AND ALL WORKS FINE!
Click to expand...
Click to collapse
i also resized to 43mb
will your updater work for me
rojblake said:
i also resized to 43mb
will your updater work for me
Click to expand...
Click to collapse
please help me i got my ba yesterday
rojblake said:
please help me i got my ba yesterday
Click to expand...
Click to collapse
Yes use my Updater this restore the partitions!!
d-two said:
Yes use my Updater this restore the partitions!!
Click to expand...
Click to collapse
i fixed the problem using Chef_Tony RUU and the nk.nbf from XdaIIs_launchROM_v1.12.62_178.exe to go back to wm2003se and after that i used How To ExtRom EN.pdf manual to restore the partition.
Tanks for your advise and for the fast replay
help
how to use d-ways updater? i got into the same problen and white screen horror after flashing.. need help really bad
xaoup said:
how to use d-ways updater? i got into the same problen and white screen horror after flashing.. need help really bad
Click to expand...
Click to collapse
Hello all,
I need a help, my Qtek 9090 dont work properly.
D-Two, i was try to use your update software, but, "stuck on 4colored" persists in all updates, except with WM2003SE-PTB, but still with errors on flash.
What do I need?
Do you have a step-by-step to solve this problem?
I'm trying to update several weeks, but without success.
Like I said, I can only install the original version.
Thanks a lot.
Pelayo said:
Hello all,
I need a help, my Qtek 9090 dont work properly.
D-Two, i was try to use your update software, but, "stuck on 4colored" persists in all updates, except with WM2003SE-PTB, but still with errors on flash.
What do I need?
Do you have a step-by-step to solve this problem?
I'm trying to update several weeks, but without success.
Like I said, I can only install the original version.
Thanks a lot.
Click to expand...
Click to collapse
Which radio has the Device (R 1.xx)
d-two said:
Which radio has the Device (R 1.xx)
Click to expand...
Click to collapse
How do I check that?
Pelayo said:
How do I check that?
Click to expand...
Click to collapse
make softreset and look on the Display
R: xxx example R: 1.15
G: xxx
D: xxx
Hello my friend.
I will check and reply later, I dont brought the "Qtreco" here at work.
Thanks.
hello all,
See version bellow:
R 1.06.00
G 1337.38
D WM6.1 Manila
Thanks.
Dear D-Two
I did update the radio, see below:
R 1.15.00
G 1337.45
D WM6.5.21888
But the 4colored screen persist.
Thanks.
Hello, I have fixed the problem, see:
1. I installed the WM2003
2. Partition the "disk"
3. After that I could install WM 6.1
Some things do not work, type:
1. Select multiple objects with the Styllus, so I have to use the "Shift" key
2. There are no options for SimCard.
Thanks
XDA lls 4colored screen and dosent load windows
after installing RC5 23698 Multi-Rom my stuck on 4colored screen and dosent load windows i tried to install other roms they all install successful but they all get stuck at the 4 colored screen i tried to downgrade to wm2003se official rom but they all gave me error PLEASE HELP me
radionec2002 said:
after installing RC5 23698 Multi-Rom my stuck on 4colored screen and dosent load windows i tried to install other roms they all install successful but they all get stuck at the 4 colored screen i tried to downgrade to wm2003se official rom but they all gave me error PLEASE HELP me
Click to expand...
Click to collapse
I have same problem, please help my BA stuck in four color screen, wont start up.
caritau said:
I have same problem, please help my BA stuck in four color screen, wont start up.
Click to expand...
Click to collapse
put the battery out for one hour...