Hi all,
i've a Qtek 9100 and i've update it with an HTC WM6.1 fund here named ROM PV 2.0. The phone starts up for 6 hours but very slow, so i activate the CPU accelerator until 300 Mhz and the device was vary faster. After 5 minutes the device shut down with no life. I remove battery and when i re-insert it the screen splash initially with IPL ecc..., and it boot, but when the desktop shoul appear, the screen is wite and no activity present on display and on the buttons. If i connect the device to PC, there's no activity. Is possible to entry in a sort of safty mode as in windows and stop cpu accelerator(becouse i think that's the problem)?
Many thanks.
Hard reset, and don't overclock past 276mhz. Moved to Wizard.
Thanks a lot!
It works! Many,many thanks.
Upgrade to WM6
Does anyone know where or how can I upgrade my HTC 8125 with WM5 to WM6?
Related
Hi,
I have been using the 1.440 rom upgrade for the iMate PDA2k for the last 2 months and apart fromt he normal shortcomings associated with the rom, such as the phone hanging on pressing the red "hang up" button and the sound associated bug with WM10, i have been pretty content with this present version. I have recently installed FLASHDASH and macromedia flash player on my PDA2k to enjoy animated themes however the software refuses to display the selected themes for some odd reason.
I have also hard reset my machine but still it just doesnt want to work.
I REALLY want this thing to work so please can someone advise me what to do.
Regards
Ahmed
There is something wrong with the today screen part of the 1.40 ROM; i cannot minimize pocketbreeze and uptime meter not works properly.
Hi everybody and sorry for disturbing you guys.
I've got a very strange problem with my friend's O2 XDA IIs (BA Device). The unit was upgraded to WM 5.0, however, I could not HR it. When I Reset the device and press Camera and Record button simultaneously (to make three lines appear), it is possible for me to move up and down and change the options but I can't finish the HR process by pressing the Messaging Button (it does work normally, not a physical prob). Besides, when I tried to upgrade the unit to another ROM (my friend was fed up with the current ROM since it was too slow), the unit couldn't recognize an USB Connection when it was in Bootloader mode (it could sync normally with my PC, already tested this). The screen kept showing Serial at the top and v2.06 at the bottom. As the result, no ROM upgrade Utility could do its job.
I've been using Pocket PC Phones for 2 yrs and this is the 1st time I've seen this problem, even though I used to use a MDA III for half a year.
Looking forward to hearing from you soon.
Tks and rgds.
Same here - device no longer recognized as USB in bootloader mode Previous ROM? helmi_c 2.3
In one of helmi's posts, he mentions something called "clearstorage". This might be what you are looking for. See here:
http://forum.xda-developers.com/viewtopic.php?p=356258#356258
After some playing around I have noticed that my BA hangs in BL mode, sometimes before I put it on the cradle, sometimes after I do that :/
try mtty software
it might be helpful in your case
search the forums for it and for available commands
Hi,
I have just upgraded my Blue Angel's (BA) ROM to the WM5 AKU3.5.2 R5 Rom Kitchen v2 last night, but start having issues already!
There are a couple of scenarios that I found the BA will hang at the startup screen when the Windows Mobile logo appears.
1. The first scenario was when I changed my battery. I turned off the screen, pull the battery out and replaced it. The BA hung!
2. I installed SPB Pocket Plus 3 and uses the embedded RESET function (icon) to restart the BA. Every single time I did it, the BA hung. (And I have tried more than 5 times. It really started to piss me off!)
The only solution that I can get back to the WM5 system was to give my BA a hard reset! The paid was to LOSE ALL the programs I have installed!
Has anyone experienced this before? What was wrong with it?! Did I do something ridiculously wrong or just another bug (a big one!) of the ROM? If it's a bug, anyone has a smarter way to get around it rather than hard resetting the BA before the fix comes out?
Many Thanks!
Spent hours on it!!!! Resolved by upgrading the ROM to the latest AKU3.5.2 R5 Rom Kitchen v2 and use the default setting with "BuildOS.exe".
Cheers
I have followed all instructions for unlocking my Wizard by O2 and have no problems upgrading. The big problem is when the phone goes to sleep it will not come back on or the screen will be locked up. Only a soft reset will make it function again until it goes to standby. I have tried every WM6 rom and I have the same problem. I downgraded back to a Cingular rom because I use them as my carrier. No problems running any WM5 roms. I have also used the Cingular patch after upgrading and there was no difference. Still will not wake up after going into standby. If i place a test call to phone while in standby w WM6 the phone will not ring but the backlight will come on. At this point no buttuns will answer call. Must reboot. Has anyone any answers or simular issues?
Thanks
You have to use either the 2.19 or the Faria 2.69 radio ROM to fix the problems you're having. Almost everyone who's used a different radion version other than those has experienced the same problems you're having.
Still Locks up
I started from the beginning downgrade/CID unlock/T-Mobile rom/radio update one at a time to 2.19 and 2.69. Still hangs on wake up or when receiving a call after 3-5 min. Works OK w/WM 5 but not with any of the WM6 upgades.
Are you using a G3 Wizard? If so, try to upgrade your IPL and SPL to newer versions (The most current is 3.08)
Updated IPL and SPL to 3.08 (Same Problem)
Well as long as I never let my phone sleep I will not have any problems. There must be somthing that WM6 is doing that WM5 does not do. Might be a registry setting. Anyone with more ideas besides going back to WM5. IPL and SPLs loaded fine when I updated them.
Do you have your phone passworded? Seems to me that I remember that people were also having problems like that when they set a password and set a sleep timeout.
As I remember, that is causing Wizard to power on itself...
Help! !
PDA2K--Serial ver 2.07
PDA2K from WM2003 upgrade to WM5, the upgrade completed successfully. Then at the same time hold down the camera and recording + RESET. Three options. NO choice. YES. YES. Then click the information button, the screen showed white. Waiting for about 10 minutes screen lights out (if connected power, black and white will not be extinguished.), And then RESET, has been parked in 4-color screen, waited for about 10 minutes screen lights out (if connected power, not white lights will be extinguished). Tried different ROM upgrade and direct upgrade to WM6, the upgrade also successfully completed, and no any error messages. However, the final stop in the same or 4 under color screen! Later, I removed batteries, probably after 25 minutes then loaded into batteries. To be able to smoothly enter the system boot. Show information equipment, equipment, information display disorder (PH20B shown in WM2003). Phone, Internet, SMS, all normal. RESET again and stay in the 4-color screen. Battery out again about 25 minutes to install batteries, the results can be entered only occasionally WM5 system. Return to the re-escalation of all WM2003 is also normal. But every attempt to upgrade to WM5 above systems remain in the 4-color screen under.
Before the upgrade to WM5 has radio has been upgraded to 1.15.
There is another problem: PDA2K Bluetooth not always start each time you start always display the "Bluetooth driver shortage ....."
MTTY have also been used to save, but can not save PDA2K
MTTY use the following steps:
1: set 14 0
2: task 28
3: task 0
In this urge to suggestions rescue!
The problem is hardware or software problem? If hardware problems, are most likely to go wrong or in which chips on the motherboard?
Thankful! ! !
Thank you! ! !
8802053 said:
Help! !
PDA2K from WM2003 upgrade to WM5, the upgrade completed successfully. Then at the same time hold down the camera and recording + RESET. Three options. NO choice. YES. YES. Then click the information button, the screen showed white. Waiting for about 10 minutes screen lights out (if connected power, black and white will not be extinguished.), And then RESET, has been parked in 4-color screen, waited for about 10 minutes screen lights out (if connected power, not white lights will be extinguished). Tried different ROM upgrade and direct upgrade to WM6, the upgrade also successfully completed, and no any error messages. However, the final stop in the same or 4 under color screen! Later, I removed batteries, probably after 25 minutes then loaded into batteries. To be able to smoothly enter the system boot. Show information equipment, equipment, information display disorder (PH20B shown in WM2003). Phone, Internet, SMS, all normal. RESET again and stay in the 4-color screen. Battery out again about 25 minutes to install batteries, the results can be entered only occasionally WM5 system. Return to the re-escalation of all WM2003 is also normal. But every attempt to upgrade to WM5 above systems remain in the 4-color screen under.
Before the upgrade to WM5 has radio has been upgraded to 1.15.
There is another problem: PDA2K Bluetooth not always start each time you start always display the "Bluetooth driver shortage ....."
MTTY have also been used to save, but can not save PDA2K
MTTY use the following steps:
1: set 14 0
2: task 28
3: task 0
In this urge to suggestions rescue!
The problem is hardware or software problem? If hardware problems, are most likely to go wrong or in which chips on the motherboard?
Thankful! ! !
Thank you! ! !
Click to expand...
Click to collapse
I come from China, the English level is not high. If you do not understand the language or I violated that like to say I am sorry. Urge you to help. Thank you!
8802053 said:
I come from China, the English level is not high. If you do not understand the language or I violated that like to say I am sorry. Urge you to help. Thank you!
Click to expand...
Click to collapse
Your post is clear enough, no worries there. I presume there have been no replies due to lack of knowledge. If you have not yet visited this site I would suggest you do so. You have a pretty decent knowledge of the device (mtty usage and all) so try the steps here one by one:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
Hope that helps.