i have touchflo v4.17.07.14 pdaviet on my tmo wing, but i have been reading about other roms/spl. if i want something else, can i just download and install it?
thanks
DK
Yes you can.
thanks gauntman,
i wasnt sure, i'm new at this. since no one replied to my problems with
touchflo v4.17.07.14 pdaviet rom, i'm looking for a different one.
thanks again
DK
i would try either opentouch 3.0 or 4.0
i'm still using 3.0, and see no reason to flash it again. opentouch has a known comm manager issue in 3.0, which may have been fixed in 4.0, but installing a different comm manager fixes the problem. overall the roms are very fast, especially using the lite versions.
good luck finding a rom you like!
alongenemylines said:
i would try either opentouch 3.0 or 4.0
i'm still using 3.0, and see no reason to flash it again. opentouch has a known comm manager issue in 3.0, which may have been fixed in 4.0, but installing a different comm manager fixes the problem. overall the roms are very fast, especially using the lite versions.
good luck finding a rom you like!
Click to expand...
Click to collapse
I second this...I also use Open Touch and it runs great!
wow, thanks a lot for the response.
i'm gonna look around for the opentouch 3.0
DK
awesome rom
alongenemylines said:
i would try either opentouch 3.0 or 4.0
i'm still using 3.0, and see no reason to flash it again. opentouch has a known comm manager issue in 3.0, which may have been fixed in 4.0, but installing a different comm manager fixes the problem. overall the roms are very fast, especially using the lite versions.
good luck finding a rom you like!
Click to expand...
Click to collapse
i installed opentouch 3.0 last night. i really like it. where is the cube? i checked the tf setting and it is enabled, but i don't know how to access it. any ideas?
thanks for the suggestion of opentouch. i'm gonna look for slide2unlocka nd i think i'll be done for a while.
DK
Related
It seems that many programs crash asking for .Net cf 2.0 but my Wing comes with it from the factory (WM6.) To make it worse, if I try to install it, I get an error that a newer version was found already installed and the install aborts.
I wasn't even aware that you could install/upgrade .NET on your PPC...
neptune said:
I wasn't even aware that you could install/upgrade .NET on your PPC...
Click to expand...
Click to collapse
Compact Framework, not the desktop version.
I had the same problem as you... and it was "fixed" when I went with the PDAVIET rom.
Theres a 3.5 BETA CF installation out there... see if that will help?
http://www.microsoft.com/downloads/...37-A62F-4A6E-9727-7791BF4CC2BD&displaylang=en
duprade said:
I had the same problem as you... and it was "fixed" when I went with the PDAVIET rom.
Theres a 3.5 BETA CF installation out there... see if that will help?
http://www.microsoft.com/downloads/...37-A62F-4A6E-9727-7791BF4CC2BD&displaylang=en
Click to expand...
Click to collapse
Thanks! I tried the 3.5 and it helped with SOME of the programs but not all...
Does the Wing have to be unlocked to run the PDAVIET rom? My wing is starting to slow down a lot and I hate having to do so much configuring just to make the stock tmobile rom to be somewhat usable.
I had the same problem with CF 2, and since it's built into WM6, there's nothing that can be done.
Regarding being able to install a new rom, The author who coded the program that allowed me to install PDAVIET v14 on my Wing is currently working on releasing the tool that will allow installation on the Wing.
Apparently the PDAVIET roms ... V15 and V14 are totally different. Because v15 is based on HTC or Dopod ship rom and v14 is based on T-mobile rom... so that's why some people are able to install the 15, but not the 14.
This is being worked on as we speak, and will hopefully be out soon.
And I see he just let you release it!! Awesome! I'm going to do this as soon as I get home. ^_^
So, which one runs better? The 14 or the 15? (And can I install either one with that tool?)
Is anyone working on adding manila 2.5 to the official WM 6.5 t-mobile rom? What I'm looking for is a rom that changes the version of manila it comes with to 2.5.
jbomhold said:
Is anyone working on adding manila 2.5 to the official WM 6.5 t-mobile rom? What I'm looking for is a rom that changes the version of manila it comes with to 2.5.
Click to expand...
Click to collapse
what you want from t-mobile rom? what is better than HTC?
all package (90%) coming from HD2 and from this moment from 2.02 T mobile HD2
so nothing stay the same from t mobile rhodium rom....
My issue is most of these roms put out are to customized. I want nothing more then a stock rom running 2.5.
jbomhold said:
My issue is most of these roms put out are to customized. I want nothing more then a stock rom running 2.5.
Click to expand...
Click to collapse
My thaughts exactly
jbomhold said:
My issue is most of these roms put out are to customized. I want nothing more then a stock rom running 2.5.
Click to expand...
Click to collapse
I think they are just too buggy, unstable, and slow. A select few seem to have no issues with these roms tho
I too would like this. I flashed the Stock Rom and it actually worked and my experience with memory was very good, so was the battery. But I really miss Sense 2.5. But with the stock I a Voice Command that actually worked, Telenav that worked and My Account that Worked, I have tried cabs of these but they just didn't work as good as the stock rom. The thing I did not like about the stock rom was v 2.2 of google maps and an old version of NetCF some of my programs would not work. Alas I have come to the conclusion I will have to give up some things in order to have my Sense 2.5.
you could always install netcf3.5, all the roms i tried the T-Mo account cab i have worked just fine. Just down load the new Gmaps from Google, it works great. I tried the new TMous stock rom and liked it very much but had gotten used to sense 2.5 so am going back custom.
I'm posting a very very VERY light ROM that can be used to boot the various Android releases floating around this forum. GenY's DualBoot application is cooked in for easy of launching Haret.exe.
Do not download this ROM to use as a regular Windows phone. It has NOTHING in it but drivers and 21889. It's almost useless, for anything but booting android. Thanks and enjoy
The ROM can be found here http://hotfile.com/list/93322/b5a2687
Just pick the Android ROM which should be no bigger than 70 Megs
I will keep this updated as the COM2 builds progress... No need to build this type of ROM with the newer COM branches
You COULD use this ROM to try out apps, maybe even run SPB Mobile Shell or something like that, but keep in mind it's bare as can be, as in, nothing installed on it and nothing on the start menu
Just to clarify.. this is NOT an Android ROM. It's a clean WM ROM used to boot Android from the Storage Card. You will need to find an Android package to install to your Storage Card first
Space reserved for posting working Android images....
Here's one > http://forum.xda-developers.com/showpost.php?p=5484494&postcount=738
One more.. just in case
So Android is ported enough to be usable?
So Android is ported enough to be usable? Oh and 'first'! Because it's my first time to be the first poster- not because I'm the first poster.
Love your work by the way. I'm sure you hear it all the time, but one more can't hurt right?
Great!
I am really glad to see you do this. This was badly needed as the dev. in rhodium for Android is way behind. Thanks! Also, I just DL'd your lates & I will be sending you some brn files for action screen to match. I hope you like 'em.
GSLEON3 said:
I am really glad to see you do this. This was badly needed as the dev. in rhodium for Android is way behind. Thanks! Also, I just DL'd your lates & I will be sending you some brn files for action screen to match. I hope you like 'em.
Click to expand...
Click to collapse
I agree... it seems nobody was doing a bare bones, drivers & SYS only, ROM for the android guys to get their groove on, so hopefully this helps
NRGZ28 said:
I agree... it seems nobody was doing a bare bones, drivers & SYS only, ROM for the android guys to get their groove on, so hopefully this helps
Click to expand...
Click to collapse
Does this rom still give option to use wifi router?
Thank you for the lite rom NRGZ28. I'm still debating giving this a try....My Energy Rom is so freakin sweeeet right now, I may wait a little while.
It's Great,Thanks NRGZ28!
That is good news!
Thanks a lot!
torn8o said:
Does this rom still give option to use wifi router?
Click to expand...
Click to collapse
Did you not read the first post ?
It's possible to apply this ROM into HD2 ?
HD2 Android
I also would like to know if it is possible to make the HD2 run android system. Boy that will be great, I was eager to try an android phone, but, i liked the HD2 specs and if i can make it run both it will be great news.
i tried it and it doesn't work CustomRuu say that the ROM is not for my mobile
G-ThGraf said:
i tried it and it doesn't work CustomRuu say that the ROM is not for my mobile
Click to expand...
Click to collapse
Pretty obvious since you found this in the TOUCH PRO 2 forum !
Works great with your Android Super Lite ROM. I ended up installing Gen.Y Dual Boot and full EnergyRom because Android port is still missing many features.
Thanks for the post to the MJG Android build. Works great except for the things you mentioned in the first entry.
this is sweet i have been running the android since mornin nd everything is solid stable and smooth but wifi n camera n other stuff doesnt work and my ringone works great job NRG
reserved for later fixes on android. tnx for building a light rom to run android hopefully more motivation is pushed on the development of android running on rhodium
Can any of you guys post some screen shots of the rom... Thanks
can u shine some light NRG
my questions is how does having a light bare windows mobile rom benefit running android? im not sure why i would want a striped rom over a regular rom to boot android off of...? does it allow more ram for when android boots up?
I wanted to know if someone has , or knows of an untouched version of a WM6.5 rom for the Viva, similar to the wm6.1 that comes with the phone,at least in terms of installed stock programs, since I've tried every ROM available, but the most of them, doesn't have the phone pad with t9 in spanish, nor any of the standard keyboards and since I use spanish as my native language, I really need it.
And many of the available ROMS has too many tweaks that affect battery life, or some bugs that cannot allow the volume rocker to be locked, to mention some bugs.. I'd love to to cook a rom for my viva, if I knew how to do it, but since I don't know...
Thanks, pals!
Frank.
I think Jagan's Evolution Ultimate Beta is what you're looking for. It's not customized, and it's pure and light, and doesn't have any of the bugs you mentioned. You can flash it and customize it to your liking.
It doesn't have a Spanish keyboard, but you could use the original EzInput 1.5 keyboard (the same one as the stock 6.1 ROM). It has Spanish support with T9 too.
Download it from here:
http://forum.xda-developers.com/showthread.php?t=426281
CAUTION: The EzInput version 2 might cause some problems on WM6.5 so I recommend you install the older version 1.5 only!
You could also try FingerKeyboard which provides support for many languages including Spanish. Get it from here:
http://forum.xda-developers.com/showthread.php?t=501434
Good luck.
Ok, I've tried it, and I can't get to work Manila 2d & EZinput on it... any hints? Since I've already downloaded the Cab's but it doesn't work at all...
Try downloading this cab:
http://www.4shared.com/file/YW2_fEqG/BJK_HTC_EzInput_QVGA_EN_FR_DE_.html
It works for me, and I can switch languages and other keyboards. But make sure you uninstall all the previous keyboards before trying this cab.
As for Manila 2D, try the following thread:
http://forum.xda-developers.com/showthread.php?t=541750
Carefully follow the instructions there to make it work on your device. Other users have tried it and it works for them. I didn't try it myself because I'm using SPB Mobile Shell instead of Manila 2D so I don't know if it's going to work with you or not.
In case it doesn't work, why don't you try flashing the Evo 2.5A ROM?
Thanks for the support, GFX! I've finally got all to work! I've used the tools you posted on your first reply, for some reason I couldn't do it before.. strange.. All worked out like a charm after a 2nd reflash...weird, huh? Well, I appreciate your effort, thanks a lot!
Frank.
PS: Do you know if Manila 1.2 is available for WM6.5?
Manila v1.2
redfox64 said:
PS: Do you know if Manila 1.2 is available for WM6.5?
Click to expand...
Click to collapse
Yes it is. Here is a link for it.
http://www.mobilitydigest.com/forums/showthread.php?t=1279
redfox64 said:
Thanks for the support, GFX! I've finally got all to work! I've used the tools you posted on your first reply, for some reason I couldn't do it before.. strange.. All worked out like a charm after a 2nd reflash...weird, huh? Well, I appreciate your effort, thanks a lot!
Frank.
Click to expand...
Click to collapse
You're welcome!
Glad it worked out with you.
Enjoy your Viva..
Well,I'll give some feedback:
After some testing,tweaking, hard-resetting and so, I decided to give up TOUCHFlo,and stick to WM6.5's normal gui, since it Manila doesn't work well on wm6.5 viva, manila 2d 2.0 after full installing, it becames too heavy for the phone, it gives ~35mb of free memory, manila 2d 1.2 has better performance,around ~70mb of free memory, but is a beta and it's not complete, since many of the tabs don't work.
I've tried almost any WM6.5 rom posted here, and in other forums, like the PhamQuang ones (from V21 to V27), the older evolution series (Evo,Evo+,Evo ESN,Evo2, Evo2.5A), Angel Azul, Angel negro, and some others I don't remember. This is the most stable rom that I've tested, it's fast, almost bugless, and clean, GFX was right. I totally recommend it.
By the way, which UI do you use? I want some fast & lightweight one.
htc touch viva purwe rom
hi help me to get htc touch viva 6.5 professional pure rom
binu200876 said:
hi help me to get htc touch viva 6.5 professional pure rom
Click to expand...
Click to collapse
why do not you look here -> http://forum.xda-developers.com/tags.php?tag=6.5
Happy Thanksgiving guys! Been thankful for the helpful tips and tricks with my lovely X1 I bought last year's Black Friday event!
Quick question.
How do I get Cookie's Home Tab to work on my Win6.1 platform? I read on that you need Manila or Sense 2.5, any download links for those will help. Search function, yes, but I dont know which one pertaining to 6.1!
Thanks in advance
Maybe I'm wrong but I guess you'll need to flash another ROM incl. Sense... AFAIK Sense is not available as "installable application".
1. hardSPL
2. download new ROM (e.g. Energy ROM, see link in my signature)
3. flash from SD (instructions here)
^Thanks, just got it done yesterday. Installed Valkyrie rom, but it came with outdated 1.8 ver. instead of 2.0 D:
Valkyrie is a bit dead rom meaning that agent is developing only if major updates take place. I was ex-valkyrie-fun. However I believe that he has released a rom with cht2 (at least beta version).
why dont u try energy rom? it has for sure what you need...
Mr Black'd said:
Valkyrie is a bit dead rom meaning that agent is developing only if major updates take place. I was ex-valkyrie-fun. However I believe that he has released a rom with cht2 (at least beta version).
why dont u try energy rom? it has for sure what you need...
Click to expand...
Click to collapse
I switched from Valkyrie to 826x. 826x had no additional add-ons, just the ROM upgrade, so it was really convenient to switch. Now running CHT + Editor 2.0.0.
Still trying to get use to the low battery fluctuations compared to a Stock ROM, but loving the new interface and programs it can run now!