I already upgraded my Treo 750 from WM5 to WM6 using the APAC 2.27 downloaded from Palm website. My problem is my firmware. It is still 1.12.0c.00. How could I trick the TreoUpdater into again reinstalling the 2.27 ROM into my Treo?
Thanks.
Use the SD-Card methhod, this will work.
http://wiki.xda-developers.com/index.php?pagename=HTC_Cheetah_Upgrade
Calico
Thanks a lot! Everything worked! I really love this forum.
Related
hi to all
i have successfully upgraded my spv m2000 to imate 1.40 and also updated the radio rom to 1.3
all seems to be working ok with no problems so far
i have the K-JAM G2 version with SPL/IPL 2.16 OS 2.16.9.1 (if it makes any difference).
i want to upgrade to WM6. i was wondering if i at all should. it has a 200mhz processor..
also i was wondering if WM6 can at all be installed on this device since most the roms i stumbled into were for G3/G4 phones.
also, if i try to install WM6 and it doesn't work and i can't load my phone again, how will i be able to flash it back to WM5?
thank you
Has anybody found away to unlock radio ROM for those that are stuck with a flashed Hermis radio?
manfly9884 said:
Has anybody found away to unlock radio ROM for those that are stuck with a flashed Hermis radio?
Click to expand...
Click to collapse
Why do you want to unlock your radio? 1.54.07 Is the most stable radio, so far, for Palm Treo 750/750V. No drop calls or any other issue like the ones that affect the rest of the treo radio ROM's. Nobody complained yet.
reyjabs said:
Why do you want to unlock your radio? 1.54.07 Is the most stable radio, so far, for Palm Treo 750/750V. No drop calls or any other issue like the ones that affect the rest of the treo radio ROM's. Nobody complained yet.
Click to expand...
Click to collapse
Thanks for your input. I just want the freedom to do so, that is all.
Have you tried going back to original SPL and then flashing with original rom?
That's the only thing coming to my mind, I may be wrong...
miloszz said:
Have you tried going back to original SPL and then flashing with original rom?
That's the only thing coming to my mind, I may be wrong...
Click to expand...
Click to collapse
Found this
fatality88 said:
I've used the KaiserCustomRUU (dload from Kaiser thread) and a Hermes Radio ROM (Hermes wiki) and the ones i've tried work fine (the latter ones).
currently using 1.54.30.10 and works a treat (t-mobile uk) - most stable rom i've used on my treo (connectivity/hsdpa).
may sound like a strange way to flash the radio but works for me... (the hermes shares a lot in common with the treo processor/radio wise)
Palm Treo 750v - Unlocked - T-Mobile
TREO750-2.23-VFU
Radio - 1.54.30.10
Click to expand...
Click to collapse
reyjabs said:
Found this
Click to expand...
Click to collapse
Thanks my friend, will try and see what happens
sorry to be a bit noobish at this, but how can I upgrade my radio? I have a 750 at&t branded that was unlocked with WM5. I upgraded to WM6 with official (Treo750_2_25_ATT_EN_DesktopUpdater). As of now, my boot loader shows up as:
Palm Tr
IPL-0.20
Palm Tr
SPL-0.24.0000
My OS and Firmware shows up as:
Windows Mobile 6 Professional
CE OS 5.2.1239 (Build 17746.0.2.4)
Firmware Version: 1.54.00.00
At times I notice my calls get dropped and when they do the signal strength goes way down even though I have not moved an inch before a call starts. Before it starts, antenna bars are at least 3. I heard this radio version is the best 1.54.30.10. I obtained the herm_radio_only_1.54.30.10_customruu.rar, tried renaming RUU_signed.nbh to CHEEIMG.nbh, and using bootloader method, but after the three colors, it says Loading..., then displays "00068002" at the top center, then back to the three color screen with those IPL and SPL numbers listed above and the word "Serial" at the bottom center.
How can I upgrade to this and what tools do I need? thanx
Edit: btw I am using this on tmo us network
nospoon said:
Palm Tr
IPL-0.20
Palm Tr
SPL-0.24.0000
Click to expand...
Click to collapse
nevermind, I took the plunge and ran step 1 with CheetaUnlocker:
http://forum.xda-developers.com/showthread.php?t=334100
SPL version displays 1.40.OliNex.
then I was able to flash the radio to 1.54.30.10. Let's hope this is better than 1.54.00.00.
Are you still using the ATT 2.25 ROM? The ROW 2.27 ROM is a lot better. Check it out.
reyjabs said:
Are you still using the ATT 2.25 ROM? The ROW 2.27 ROM is a lot better. Check it out.
Click to expand...
Click to collapse
I just went to the 2.27 ROW from the 2.23 ATT. Radio stayed at 1.54.30.10.
nospoon said:
I just went to the 2.27 ROW from the 2.23 ATT. Radio stayed at 1.54.30.10.
Click to expand...
Click to collapse
Welcome to the band!!!!!
How to upgrade from vodafone to 2.27 APAC without sd?!
Ok... it's hard spl-ed and unlocked... it has the stock 2.23 vodafone and i want the latest... i don't want to use an sd card.
Solutions? The normal updater does not detect my device...
use this tool...
KaiserCustomRUU.exe
hey thanks!!!
1. got one from over at the kaiser section.
http://forum.xda-developers.com/showthread.php?t=364048
2. deleted the included RUU_signed.nbh
3. and copied mine from 2.27
4. entered tricolor boot screen
5. connected to usb and flashed!!!
worked like a charm
Hi,
Ages ago I upgraded my G4 wizard to WM6.1. Now it turns out I need to put it back to WM5 - but can't find a RUU to use.
The original ROM was from O2, but that is not vital. Does anyone know where I can get a suitable RUU from? I found one that would, I think, only work with a G3 device, but have not found one yet I can use...
Cheers,
Ben
I thought I had found one, but the RUU complains that it is the wrong version (Error 300) and I get nowhere. I still have WM6.1 working fine... how infuriating :0p
Well,as you say its a G4 and upgraded to wm6.1,ok
First,how did you upgrade to wm6.1,which method did you apply to upgrade,was it SoftSPL or HardSPL ?
If you applied SoftSPL,then,just simply download official stock rom and flash it,it'll work,but if you applied HardSPL and the IPL/SPL are changed,then first you'll have to Remove HardSPL,revert back to Original Official IPL/SPL of the carrier and then you'll be able to reflash wm5,ok
Let me warn you here,if the phone is HardSPL and you flash any Official stock rom without removing HardSPL first,will 'Brick' your phone.
barkerben said:
Hi,
Ages ago I upgraded my G4 wizard to WM6.1. Now it turns out I need to put it back to WM5 - but can't find a RUU to use.
The original ROM was from O2, but that is not vital. Does anyone know where I can get a suitable RUU from? I found one that would, I think, only work with a G3 device, but have not found one yet I can use...
Cheers,
Ben
Click to expand...
Click to collapse
hi there,
Actually i had the problem with G4 on how to upgrade to WM6, I tried but no luck, haven't tried either SoftSPL or HardSPL yet but when I flashed my WM5 original ROM, I didn't have any backup at all so I kept searching answers here for days, & finally I tried the Wizard Love ROM which one of the Senior Member here said it will work. It works for me & now I'm using WM5 Wizard Love Rom with CID LOCKED.
Hope I can help u with that..
P.S.
If anybody can teach me how to upgrade my Wizard G4 (T-Mobile/MDA - black) to WM6 (any rom) or the download links for SoftSPL ONLY! they said it's safe..
Would gladly appreciate!
Thanks...
himig_natin said:
hi there,
Actually i had the problem with G4 on how to upgrade to WM6, I tried but no luck, haven't tried either SoftSPL or HardSPL yet but when I flashed my WM5 original ROM, I didn't have any backup at all so I kept searching answers here for days, & finally I tried the Wizard Love ROM which one of the Senior Member here said it will work. It works for me & now I'm using WM5 Wizard Love Rom with CID LOCKED.
Hope I can help u with that..
P.S.
If anybody can teach me how to upgrade my Wizard G4 (T-Mobile/MDA - black) to WM6 (any rom) or the download links for SoftSPL ONLY! they said it's safe..
Would gladly appreciate!
Thanks...
Click to expand...
Click to collapse
Check out this Sub-Forum,you'll get all the info about upgrading a G4 device:-
http://forum.xda-developers.com/forumdisplay.php?f=343