Related
Hi all,
I bought an Alpine, brand new (unwanted contract upgrade) from eBay, received it today and put in the PayG o2 sim that I bought from carphone warehouse. The phone is locked to o2, as I tried my old virgin sim and got the old "Enter unlock code", but with the PayG sim, it goes straight in, except there is an exclamation mark next to the signal indicator. I can't figure out what it is. Do I have to wait, say 24 hours for the sim to receive a signal? Or is it something more suspect? I can't make calls or do anything that requires payment from the sim.
Cheers,
Karl
EDIT: I have googled, and done a hard reset. I have come across that problem of not being able to select "Prepaid" for the simcard. I'm even using an o2 sim card! Is there something else I need to do? I've seen the settings for gprs and mms, but I just need to get it so I can use it as a phone! Please help!
Can nobody help me?!?!?
Have you tried calling O2? I had no signal for a few hours last night and had the ! mark next to the aeriel symbol, maybe there were network problems in your area as well?
Alternatively have you tried the SIM in another phone to check it's been activated correctly?
You could also try SIM-Unlocking your phone using the tool somewhere on this forum (Search should find it) and try it with your Virgin SIM to see if it's actually the phone which isn't working.
Apart from that can't help.
Sorry!!!!
G
I have emailed them about the problem, and may well back it up with a call; I just don't want to be on hold for an hour listening to someone playing the trumpet with their arse.
My sister has an o2 phone, but is out at the moment. I will check with her when I next see her.
I have been looking at the all in one unlock tool in the General section, but am wary of it as I don't want to brick this phone. Will it wipe the WM2k3 OS do you know? Or is it just like an application that searches the system?
Thanks!
UPDATE: Have just decided to bite the bullet and try the all in one unlock. It worked and my XDA is now on my old Virgin Sim. I will try my o2 Sim in my sister's phone at some point. Could it be that I have bought a dodgy o2 sim?
UPDATE: I tested the Sim in my Sister's phone, and it came up with "Unregistered Sim". I then put in an unused Sim that she got as part of a promotional freebie type thing and it registered in under a minute! I'm going to take back the Sim that will not register, but before I do, is there anything else I can try?
SOLVED
Simcard refunded, am using spare that my sister had as it worked straight away.
SOLVED
Glad to hear that - I had just dug out this morning the SIM unlock program and was going to PM it to you then I saw your post.
Enjoy your phone!
G
Thanks for your help buddy! Much appreciated
Hello everybody, I'm writing you from UK, where I bought a second-hand G1 (absolutely perfect!!! really good). The phone is T-Mobile branded and factory-default cleaned. Once I got it, placed my italian H3G sim inside, and (of course...) it told me that it was locked. I purchased a key (...I know may I could do without it... but very few time to spend, these days) and it was succesfully sim-free. Then I reebot it, and start the acrivation... that doesn' run!!! I insered the correct APN parameters, I also tried with a UK O2 and Vodafone sim, but, problem is that the gsm segnal level (small icon on the top with 4 vertical bars) is not giving signs of life, and it has a small "cross" on the left side. Of course I can't get the registration... I can't get the line!!!! why does it happen??? all the sims are correctly recognized (ask for the pin and the "no sim" messages and icons are off), but no way to go over...
Please, help me in any way, just 1 more day here, then I'll go back to Italy... far from the shop!!!! HEEEEEEEEEEEEELP!!!!!!!!!
If you type:
reboot
and press enter. If the phone reboots you can have a chance, if the phone does not it means its on a updated version which you will have to downgrade. While downgrading i recommend going up to Rooted versions of android. Although you might not need it.
You should look here:
http://forum.xda-developers.com/showthread.php?t=442480
and/or here:
http://forum.xda-developers.com/showthread.php?t=452316
You can get through your problem, if its just the registration. by simply following a few of the instructions in the first link combined with some of the instructions in the second link.
@elmejor: He didn't even mention rooting. His problem is he can't get his phone to associate with the networks on his sim.
@tony_m78: You should probably post what apn settings you are using. Also, this is NOT A DEVELOPMENT ISSUE and should not have been posted in this forum.
thanks gor your answer.... I have been to those links THOUSANDS of times, within yesterday night and today... but I really can't get a solution. I can't go over the "error connecting to server" page :-(
The worst problem is that I really don't have time NOW, but I'll have it at the end of the week; I know I'd get a solution, working on that... but really I can't. But whay do you think about the absence of segnal? is it normal?!?
Tomorrow morning I'll find the way to buy a T-Mobile original sim and try to see what happen. . . . . . but that's strange!!!!!!!! not normal... i insered a correct code (generated from the IMEI), the answer was "unlocked", free for others carriers.... BUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU!!!!!!!!!! :-( tic tac tic tac. . . ..I don't have time!!!!!!!! :-( nobody experience this strange problem?!?
jashsu said:
@elmejor: He didn't even mention rooting. His problem is he can't get his phone to associate with the networks on his sim.
@tony_m78: You should probably post what apn settings you are using. Also, this is NOT A DEVELOPMENT ISSUE and should not have been posted in this forum.
Click to expand...
Click to collapse
...oooooops... really sorry, I was wrong. Can you link me to the correct place??? I'll move there immediatly...
jashsu said:
@tony_m78: You should probably post what apn settings you are using.
Click to expand...
Click to collapse
...I don't think the problem is the APN, I set the correct one (from Wiki) for H3G Ita and for O2 UK (these are the sim I tried with); the problem is that the segnal is ZERO, like the sim is not present... BUT IT IS, it ask me for the pin and accept it....
Can you manually select the network to connect to? Settings>Wireless controls>Mobile networks>Operator selection
Are you sure radio is working on this phone? Maybe it has some physical problems (like bad gsm chip)... Or - maybe you have sim cards not acceptable in UK.
Try with T-mobile sim first. If not working:
I would try to factory reset device some times, if it don't help I would try to reflashing it (firmware and radio). But in your case I think you should ask about this situation in shop where you bought it (if you have warraty) first.
Data plan?
I had a similar problem when I got my APD1 phone in the US. When I returned to the UK, I put in my Tesco SIM and the phone signal strength icon had an 'x' indicating not connected or no signal. Eventually I used my home wifi to activate the phone. After the phone was activated, the same SIM was able to connect and the signal strength icon worked normally.
BUT, it turned out that all I probably needed to do was to have a SIM with a data plan (which mine didn't at the time) <<BLUSH>>
Have you confirmed that your SIM has data turned on?
Of course ensuring that the APN settings are correct is also necessary. (But it sounds like you did that)
Hey Guys, Need a little help!
Ok, I bought a G1 from eBay (I know I know bit risky!). Recieved it today, put in my Sim card (Orange UK), and it's opened up into the setup (login to gmail blah blah time settings), got into the phone mode, but it's not picking up any network on my SIM card
I can get internet (After inputting the APN settings..)
I have looked on the "About" status, and noticed the telephone number is: 07********58622#
I don't know where the 622# is coming from, because it isn't my phone number!
I go to the Network Selection, Choose Orange, and it says "Your SIM card does not allow a connection to this network"
Any idea's?
when you call your number does your phone ring? and can you place calls with your real number showing up? if yes then i see no problem
Nope, I can't ring out, and I can't recieve incoming calls.
That number is on your sim card, not the phone. It shouldn't effect service though. Infact Mine was 00000000000 until a few months ago when some app wouldn't work because that number wasn't correct. Call TMo and say "google phone" when you get someone tell them you need your sim card updated.
Hi, thanks for that information, bit I have tried it in another g1 and everything worked as normal. Guess it's a hardware fault or a IMEI block
I have the same problem, and I don´t find de answer
I've got an AT&T M7 which I'm trying to use on T-Mobile. I've carrier unlocked it through AT&T and, with the T-Mobile SIM in, I am able to get "data". Data is in quotes there because even though I see bars I can't actually get anything. Also calls and MMS don't work. SMS works reliably though.
I've made sure the only APN is one with the settings specified on T-Mobile's website.
I saw someone on the T-Mobile help forums recommending flashing with the T-Mobile flavor RUU offered on HTC's site. I downloaded it, but it doesn't seem to recognize my phone (I assume because it's checking for some sort of T-Mobile signature?)
Anyhow, if anyone has dealt with this before, I'd appreciate any advice.
For reference for anyone dealing with this in the future, it ended up being something on T-Mobile's end. They had me turn the phone off while they reset something in their infrastructure. When the phone came back up, it was able to call.
I recently bought an unlocked Galaxy S10 SM-G973U on Amazon. Got new SIM card from a Verizon MVNO and activated phone. The phone downloaded Android 12, One UI version 4.0. Firmware Build number SP1A210812.016.G973USQS6HVA1. Service provide Software version SAOMC_SM-G973U_OYN_SPR_12_0007 SPR/XAA/VZW. The problem is there is no menu option to activate/switch on VoLTE which means when I'm on a call there is no internet. I've talked to the MVNO tech support multiple times and was told they couldn't see any problems on their side, or that the SM-G973U does not support VoLTE which is not true. I found on one of AT&T's sites that the SM-G973U needs a software patch to enable VoLTE. I also found a couple of USSD codes but they either didn't work or didn't get me to the right setup screen to turn on VoLTE. I even stopped by a Samsung store and they weren't any help either. They said they could re-flash a stock firmware but it would revert to being locked to a carrier which is apparently also not true based on what I've read on this forum. Anyone know how I can turn on VoLTE or know of an apk file or software patch to enable VoLTE?? Does one of the firmware versions posted online have the patch to turn on VoLTE??
I think the issue is that your phone is showing SPR/XAA/VZW. You say you're on a verizon MVNO (who, by the way?)... but your phone isn't seeing that. It's actually saying it's active for SPRint. The second one, XAA, means it's not able to detect the SIM type... and the third was that it was originally VZW, which you can't change and isn't really relevant. (That's just what the phone was "born" as).
Bottom line, your phone isn't seeing VZW or an MVNO as the active CSC nor the SIM card. In the past, the easy thing was to change the CSC to what you need, but I haven't found a way to do that actively. What's supposed to happen is that the CSC should update based on the SIM card and cell signal you're getting... but this doesn't always happen. I bought two phones - one switched with no issues, the other I could not get it to change no matter what I tried.
That said, the easiest thing is to clean flash the phone with ODIN to a VZW or your MVNO's ROM, so that (hopefully) the CSC updates automatically. You could also consider flashing a U1 (unlocked) ROM, as yours is not technically an unlocked ROM (U means it's a carrier ROM... which may be why it's not switching over?)
Again, I tried all of these on the second phone I bought, and nothing would switch it (my carrier is Total Wireless, which is a VZ MVNO, and actually shows up as Tracfone (TFN). I had to return that second phone and get another with TFN already activated, and that worked fine... so be sure you do this before you drop out of your return period.
Bottom line, you should be able to get this all working... my VOLTE/VOWIFI works fine... just a matter of getting you there.
Thanks. My carrier is Straight Talk which is now VZ. The SIM card they sent me has the wording "Verizon Compatible" written on it. I finally found a document that explains how to interpret the CSC codes and your explanation clarifies my understanding of it. Sound like I'll have to re-flash it. Since it was originally a VZW phone I'm thinking I should flash it back to VZW to see if that works before trying U1.
Dumb question as this is my first time flashing a phone. (I've flashed quite a few other things but never had to worry about CSC codes and bootloader versions, etc.) I don't see VZW firmware on samfirms or sammobile. I see Sprint, T-Mobile, and one listed as USA without carrier info but I don't see one for VZW. Can someone point me to the correct location to download SM-g973U and U1 firmware for VZW? Greatly appreciated and thanks for putting up with my lack of knowledge!
Edited: Found the files on sammobile. Will try the U1 (VZW) first. I'll keep my fingers crossed.
schwinn8 said:
I think the issue is that your phone is showing SPR/XAA/VZW. You say you're on a verizon MVNO (who, by the way?)... but your phone isn't seeing that. It's actually saying it's active for SPRint. The second one, XAA, means it's not able to detect the SIM type... and the third was that it was originally VZW, which you can't change and isn't really relevant. (That's just what the phone was "born" as).
Bottom line, your phone isn't seeing VZW or an MVNO as the active CSC nor the SIM card. In the past, the easy thing was to change the CSC to what you need, but I haven't found a way to do that actively. What's supposed to happen is that the CSC should update based on the SIM card and cell signal you're getting... but this doesn't always happen. I bought two phones - one switched with no issues, the other I could not get it to change no matter what I tried.
That said, the easiest thing is to clean flash the phone with ODIN to a VZW or your MVNO's ROM, so that (hopefully) the CSC updates automatically. You could also consider flashing a U1 (unlocked) ROM, as yours is not technically an unlocked ROM (U means it's a carrier ROM... which may be why it's not switching over?)
Again, I tried all of these on the second phone I bought, and nothing would switch it (my carrier is Total Wireless, which is a VZ MVNO, and actually shows up as Tracfone (TFN). I had to return that second phone and get another with TFN already activated, and that worked fine... so be sure you do this before you drop out of your return period.
Bottom line, you should be able to get this all working... my VOLTE/VOWIFI works fine... just a matter of getting you there.
Click to expand...
Click to collapse
Success! Was able to flash U1. VoLTE is now working. The CSC now shows TFN/TFN/VZW. Much appreciated!!!
Awesome, glad to hear that fixed it easily!
And TFN... I'm a fan there, too!
Hi! I'm having a similar issue with the same model and happy to see someone was able to enable VoLTE. However, most of what you said above is a foreign language to me. Would one of you be willing to give me a crash course in what you did?
Here's my specific situation. Last week (~1/4/23) Tracfone shutdown 3G. My Samsung Galaxy S10 (SM-G973U) says my network is set to LTE/3G/2G. I've read LTE is 4G, but still can't make or receive calls/texts, but data and 911 calls still work. Their tech support is no help.
From reading online it sounds like I may need VoLTE, not just LTE. Hence finding this thread. If one of you would be willing to spare some time to walk me through what you did I'd really appreciate it. In the mean time I'll try to figure out what "flashing" mean in a context that doesn't involve showing body parts
Thank you in advance!!
I'm on Tracfone (they were bought out by Verizon, BTW) - I was on Total Wireless before, which is now Total by Verizon. You might try contacting support again, as they are now VZ, and may have more help to offer.
My S10+ is running 975U1 now, and it works for VOLTE/VOWIFI properly. You may consider getting a U1 ROM installed, and maybe even the VZW (or TFN) version if available - that may get you working.
Did VOLTE ever work for you before on this or any other carrier? What is your CSC right now?
schwinn8 said:
I'm on Tracfone (they were bought out by Verizon, BTW) - I was on Total Wireless before, which is now Total by Verizon. You might try contacting support again, as they are now VZ, and may have more help to offer.
My S10+ is running 975U1 now, and it works for VOLTE/VOWIFI properly. You may consider getting a U1 ROM installed, and maybe even the VZW (or TFN) version if available - that may get you working.
Did VOLTE ever work for you before on this or any other carrier? What is your CSC right now?
Click to expand...
Click to collapse
Thanks for replying! I'm not entirely sure if VoLTE has worked previously. I bought this phone 6/2021 and have only haver had tracfone service for it. I did find in my setting that VoLTE calling is set to on so it seems like it should work. Of note, the 4Glte in my status bar has always been grayed out (I went back and looked at some old screenshots).
My current CSC is VZW/XAA/ATT.
I spoke with tracfone customer service yesterday and they had me reset my network setting and now I don't even have data and the 4Glte in my status bar that was previously gray has now completely disappeared.
Their customer service refuses to talk to me now (literally no one answers when it transfers to an agent) or they hang up on me, and no I haven't been rude, but I have told them I'm recording the call.
I bought a mint mobile package last night because I'm beyond frustrated with Tracfone. I'm worried I'll have the same problems with Mint. I'm not sure if my settings are screwed up or if it's just Tracfone. In any case things are worse now after talking to customer service yesterday.
I also notice there was no APN setting on my phone so I updated it today and restarted but no difference.
Thanks for any input!! Much appreciated. Sorry for the novel.
Ok, so based on your CSC, the phone is not seeing the SIM's carrier - it's showing XAA which means it's using the default settings, which is probably why your not getting VOLTE. The active CSC of "VZW" may be ok... depends on which carrier you're on with Tracfone. I think they're VZW only, but I'm not completely sure.
You may want to just get a new SIM card and get that activated. HOWEVER, the problem you'll likely face is that the phone was born ATT (last CSC). This means the IMEI won't match a "compatible" phone to Verizon, and they will flat out refuse to activate it (even though WE al know it will work fine). If you still want to do that, you will have to activate the new SIM on a VZ "compatible" phone, then you can swap it to the S10. Note that VZ complains about this when you talk to them... so don't tell them you're doing this... but I've done it many times and it works fine.
If your actual behind-the-scenes carrier is ATT, then you can do the activation with your phone without issue.
If none of this works for you, you can switch carriers to an ATT MVNO and you should be good to go.
schwinn8 said:
Ok, so based on your CSC, the phone is not seeing the SIM's carrier - it's showing XAA which means it's using the default settings, which is probably why your not getting VOLTE. The active CSC of "VZW" may be ok... depends on which carrier you're on with Tracfone. I think they're VZW only, but I'm not completely sure.
You may want to just get a new SIM card and get that activated. HOWEVER, the problem you'll likely face is that the phone was born ATT (last CSC). This means the IMEI won't match a "compatible" phone to Verizon, and they will flat out refuse to activate it (even though WE al know it will work fine). If you still want to do that, you will have to activate the new SIM on a VZ "compatible" phone, then you can swap it to the S10. Note that VZ complains about this when you talk to them... so don't tell them you're doing this... but I've done it many times and it works fine.
If your actual behind-the-scenes carrier is ATT, then you can do the activation with your phone without issue.
If none of this works for you, you can switch carriers to an ATT MVNO and you should be good to go.
Click to expand...
Click to collapse
OK some of that was still over my head. I'll see what happens with the Mint Sim... one f/u question now though. You said the ATT means my phone was "born" ATT. I bought my phone off backmarket and it was sold as "unlocked". Was that not true? How can I be sure in the future if I buy a used phone that's not from my carrier that it will actually be compatible?
Unlocked just means it's not locked to a carrier. That is true in your case, otherwise you wouldn't have been able to install ANY non-ATT SIM. So, you did the right thing to get an unlocked phone, and that is what you got.
The issue with compatibility is just the asshole carriers spreading lies. They do this to try to get people to buy THEIR phones, for no reason other than to make money and confuse consumers. The "born" CSC has no bearing on anything, really... neither does the carrier-specified IMEI. In your case, the XAA is good, which means it's a multi-carrier ROM, which works with all USA carriers.
Mint is a good idea - being an ATT carrier (IIRC), that should work and they should help you get it up and running even if they have to activate it. Good luck!
Awesome! Fingers crossed!! Thank you for your time and all the info❣
I'll try to remember to give an update in a few weeks for future readers
Goldie8709 said:
Awesome! Fingers crossed!! Thank you for your time and all the info❣
I'll try to remember to give an update in a few weeks for future readers
Click to expand...
Click to collapse
UPDATE: Switching to Mint worked like a charm! Once my number ported and I put the new SIM card in, service was instantaneous! I've had Mint for 3 weeks now and the service is so much better than with Tracfone! My calls go through nearly as soon as I hit call, the internet is faster.
I didn't need to do a thing either. No making APN settings, etc. I'm betting it has to do with what you said about my phone being born ATT. So funny because the software(?) is Verizon - shows the Verizon when I restart/power up. I still love my bastard phone
So thankful I didn't buy a different phone!!! Again thanks for all your help @schwinn8
Thanks for reporting back and letting us all know, and I'm glad it worked out well!
Yeah, the carriers pull this nonsense all the time... it's BS. The phones are all the same, only the ROM changes. If we can change ROMs (which we can) then there should be no reason to force users to specific IMEIs. But we know why they do this - follow the money. I encourage people to write to the FTC and FCC about this (I have).