pls help me. I have MDA II, WM6, radio 1.17. T-mobile. When I go to place without signal, MDA starts to search for it of course. But after when I go to place with good signal, it continues with searching, can not to connect to GSM signal. I must manualy turn of and turn on the radio, or perform soft reset. I performed several times hard reset, I returned do WM5, I tried radio 1.08, 1.17, 1.19. Problem still persist - for 6 months. I´m often in places without signal, so it is a big problem for me. is it hardware problem? Thank you. Peter
since you have flashed it with different RADIO ROMS, then if it were a software radio problem, it should have been fixed, so i guess (my two cents worth) its hardware, maybe you have poor internal antenna reception, something is blocking reception, maybe an inherent antenna defect. thats my diagnosis.
Related
Have a weird problem and wanted to see if anyone knows a fix.
I have siemens sx66 running wm2003
When using the phone through out the day the phone part of it stops making and recieving calls, even a reset wont fix the issue, after about 5 mins it will reconnect to the network and start to work fine, this happens about 5 times a day. It is not a reception issue since the phone worked fine in my house for the last year, it just started happening.
I upgraded to Helmi AKU3.2 1.3.2b windows mobile 5 and it seems to be more stable. Now when i lose the connection with the network a softreset will allow it to reconnect back to the network. One time when it disconnected i went into device information and for radio rom it said NONE, could this have something to do with the problem, is the phone deleting the radio rom or not seeing it sometimes?
Update:
To try to fix this issue I first smacked it a couple of times, this did nothing to resolve the problem, I then took the entire phone apart to see if there was anything broken, after noticing nothing I smacked the phone a couple of more times. After putting the phone back together the issue is still there.
doing a soft reset when "Radio: NONE" pops up seems to be the only solution.
btw, have you upgraded to Radio 1.15.00?
Hi all.
I'm facing the same issue.
Since I upgraded to Helmi's AKU3.2-1.3.1 I noticed, that the Radio Stack suddenly is lost. You will get no error message. Switching the BA on you will note that the Radio Icon has an "!". Soft resetting will not work. But strange enough, if putting th BA into craddle (or using an USB cable for syncing/charging) and then soft resetting will work, the radio unit is re-enabled again.
I'm now on AKU 3.2-1.3.2 and the issue still exists.
Unfortunately you cannot reproduce this behaviour. Sometimes it happens, but you can be happy and the BA is working for day's without any trouble.
Beside this: the BT stack performance is the worsest I ever met. Just noise, jitter and a very short range using my Headset (Plantronics M2500)
I will try AKU 2.6 this weekend hoping it will be more stable.
yes upgraded to radio rom 1.15 from 1.13 hoping it would fix the issue. Do you guys think the issue is hardware or software?
dr.x
You may want to downgrade from 1.15. There have been several reports in different posts that 1.15 presents several random problems. I installed it for about 2 weeks, but then my phone started making sounds like screetching metal, which led me to believe that I had a loose wire on the speaker or something like that. Then, I remembered about some people complaining about this Radio, so I decided to downgrade. Have not had that problem again. Moreover, I seemed to have weird reception problems in areas where I normally had good signal as well.
All in all, my bets are towards the Radio rather than the BA itself. So, downgrade your Radio and stop hitting your BA before I have to call "BA Services" for domestic violence :wink:
Hope this helps!
dr.x said:
yes upgraded to radio rom 1.15 from 1.13 hoping it would fix the issue. Do you guys think the issue is hardware or software?
Click to expand...
Click to collapse
Hi.
I upgraded to Radio ROM 1.15.00 long time ago und as it worked fine.
As I mentioned before, i faced the problems with disappearing Radio Unit first after I upgraded to AKU 3.2-1.3.1
So I suppose, it will have to do with this ROM Version (AKU 3.2-x.x.x)
Regards
Chuck
Hi, my phone have like 4 month, and since 1 month or so, it is starting to loose the signal, every now and then I check the phone and it is with out signal (like putting it on AIRPLANE MODE) and it just only come back, if I switch to Airplane mode and back to normal mode, or if I restart it.
Any IDEAS??!?!
egk-69 said:
Hi, my phone have like 4 month, and since 1 month or so, it is starting to loose the signal, every now and then I check the phone and it is with out signal (like putting it on AIRPLANE MODE) and it just only come back, if I switch to Airplane mode and back to normal mode, or if I restart it.
Any IDEAS??!?!
Click to expand...
Click to collapse
Please provide us with your rom, radio, and what country you use your device.
To find your rom and radio:
Start>settings>system>device information>version
That happened to me until i switched to duttys rom and inex radio. now that problem is solved for me.
SOMEONE SET UP US TEH ROM!!!
WE NO GET SIGNAL!
If you could tell us if you ahve flashed to a customer ROM or if you have a Stock ROM, the one that came with the phone. Same with the Radio. We could help you better. Thank You.
redbandana said:
Please provide us with your rom, radio, and what country you use your device.
To find your rom and radio:
Start>settings>system>device information>version
Click to expand...
Click to collapse
ok its a AT&T TILT
ROM Version: 1.57.502.2
ROM DATE: 08/25/07
Radio Version: 1.27.12.11
Protocol Version: 22.45.88.07H
Same here
I'm now with the updated AT&T ROM, but wit hthe same issues.
This also happened with the previous ROM.
At home I'm connected to my PC via USB. For some reason, in this location I have virtually no reception (ie I have 1 or 0 bars).
And many times, if I don't go in/out of Flight Mode after I leave home, I find myself without reception even for a couple of hours (ie the Tilt doesn't "recover" on its own).
I HardSPL'd my Tilt and tried installing the French radio in order to improve reception (other users in my location said it worked well for them), but found it was incompatible, and after a very stressful day (I was certain I'd bricked my Tilt) - was able to enter bootloader mode and restore the original radio.
At the moment I don't want to flash a Kaiser radio, and I want to wait until AT&T release their own WM6.1 ROM (I don't want to use a cooked one).
Further (I wrote about this in another post) - my GPS loses signal quite often, even under clear skies. I understand that this is another aspect of the radio drivers.
I'd appreciate any suggestions.
Thank you.
I'd rather think it's a hardware problem. RMA...
Difficult....
I live abroad, and so it'll cost a small fortune in shipping charges, etc.
Not to mention import taxes, etc, if the IMEI is changed (eg if the device is replaced).
I live in a very poor reception area just outside of Boston. Previous to purchasing my device I would only have service about 40% of the time when I was at home.
When i purchased the Kaiser reception didn't get much better so I decided to search google and it led me to this forum. After reading many threads and asking some questions I feel that that the best radio that I've used so far is NIKI - 1.58.16.27. Now I have reception 95% of the time and GPS picks up about 7-10 satelites from my basement, crazy i know.
I'm not sure how much you been reading OP but I recommend you either learn how to flash roms and radios, or you can bring your phone to AT&T and have them look at it. However that means you have to give up your tilt while its being repaired, which sucks.
is this NIKI radio compatible with the standard AT&T ROM?
I have 1.62.502.0 and radio 1.27.14.09.
Or is it compatible only with WM6.1?
Thank you.
redbandana said:
I live in a very poor reception area just outside of Boston. Previous to purchasing my device I would only have service about 40% of the time when I was at home.
When i purchased the Kaiser reception didn't get much better so I decided to search google and it led me to this forum. After reading many threads and asking some questions I feel that that the best radio that I've used so far is NIKI - 1.58.16.27. Now I have reception 95% of the time and GPS picks up about 7-10 satelites from my basement, crazy i know.
I'm not sure how much you been reading OP but I recommend you either learn how to flash roms and radios, or you can bring your phone to AT&T and have them look at it. However that means you have to give up your tilt while its being repaired, which sucks.
Click to expand...
Click to collapse
ok, you say it improves with niki radio!?
so I have never done this before, is it hard!? were can I find a GOOD tutorial or guide or troubleshooter in case i get STUCK??
Other thing, here were I live, i think ATT from the quad band, use 850 almost all the time, anything to say about that? it doenst matter?, maybe its a stupid Q...
But the Niki radio requires WM6.1, doesn't it?
redbandana,
Did you install the Niki radio on a WM6 Tilt?
And what ROM do you have? (ie the original AT&T ROM, the updated AT&T ROM or a cooked one?)
Does anyone know how/why this could have happened. Perhaps it was a coincidence that my phone broke at the time of updating....but I just have a feeling something else has happened. I updated to Dutty's Diamond ROM and HardSPL 3.29 and after that, I cannot use 3G at all. I show I am connected to the 3G network, but I cannot make/receive calls, or use the internet. If I turn off 3G, all works fine. I tried 3 or 4 radios to see if that would help, but none did. After trying many things, I decided to go back to my original setup as it worked fine before.....but I still cannot use 3G now. I get a 3 or 4 bar signal on the 3g network it shows, but I cannot make/receive calls or use the internet. I did make sure HSDPA was enabled in KaiserTweak and Advanced Config.
If anyone has any idea...I would be so grateful to hear. I am at a loss over what could have gone wrong...or if I need to send the phone in for service.
I used to run this setup before this issue:
ROM: Alex.v52.ATT.162.cube.rom
Radio: 1.27.14.09
SPL: SPL-1.0.Olipof (Kaiser-HardSPLv1)
I updated my Kaiser to the following:
ROM: Duttys_Diamond_Rom_Ruu_Signed_5.2.1588_1.65.16.25_V1.zip
Radio: 1.65.16.25
SPL: HardSPL - 3.29
after the update, I tried the following Radios to see if it would fix the 3G issue. None of them did...
1.58.25.17
1.65.20.29
Niki Radio - 1.58.11.07
Thanks for any help or suggestions!!
This might be bad info but worth a try.
1. make sure there are no proxies being used
2. make sure all the network settings are correct for your provider
3. maybe post this problem in the thread of the rom you're using.
4. Flash back to the old rom to see if it's a hardware problem.
Thanks Chumley for the quick response!!!
I just verified no proxies are being used at this time... tried with them on and off.
I did revert back from SPL3.29 to SPL-1.0.Olipof (Kaiser-HardSPLv1) and reinstalled the old ROM I was using for the past several months.
Just turned on 3G and cannot make calls or receive them. Also cannot visit any webpages.
I am thinking I have a hardware issue at this time... but curious if I did something wrong that may have caused this.
Thanks for your suggestions... I appreciate it very much.
There was a thread last week like this and at least 2 people reported having a hardware problem. The problem was almost like yours.
http://forum.xda-developers.com/showthread.php?t=396459
OMG!!!! I just helped someone without flaming them...... Something must be wrong.
Well it sounds like what I didn't want to hear. Thanks for that link!
Just wonder why it started the moment after flashing a new ROM/Radio/SPL.... seems like it is related in some way... but who knows.
I guess it was a good run with 3G data while it lasted. ha ha
If anyone knows any ballpark figure on service costs to repair a Kaiser phone, I would love to hear it. I am guessing though that it will not be worth shipping it in for service. Well maybe it will be.
No warranty?
I will have to look into the warranty. I didn't purchase anything extra...so I was sort of assuming there was a 30 - 90 day warranty which has past. Maybe it was a 1yr. Going to have to dig out the paperwork.
Please help. I have been with o2 now for a while and I’ve never had a reception problem this bad… I’ve brought my friends Kaiser. On T-mobile he had great reception around where we live and work but since I have unlocked it I have never had a satisfactory level of reception. I have tried lots of SPL’s, ROMs and radio ROMs (including the stock o2 one) and they are all as bad as each other, give or take. The number of bars of reception varies across the range but they all have the same massive dead spots with no radio reception at all. I have tried other phones i.e. nokia’s, samsung’s and a Hermes I had none of these dead spots.
Now here is where I may betray my noob status, I was beginning to believe it was something wrong with the o2 settings in general because it is like the phone is only picking up reception from certain cell towers (maybe o2 ones?!?) and ignoring others, is this possible or am I just grabbing at straws? Then I discovered a most promising the thread http://forum.xda-developers.com/archive/index.php/t-335074.html which is full of people with 3G faults perhaps my problem is linked to the 3G mast nearby and so in fact my phone only works where there is a poor signal and no 3G which forces it to use GSM. I have tried to prove this but my current ROM Mobile Vista 4.00 SeaDragon 5.2.21109 seems unable to remember the GSM setting, the phone locks up and require a soft reset. I am sure it can’t be a hardware fault as suggested in the above thread because my friend had the phone working flawlessly.
Any suggestions as to what I can do. I’ve been at this problem for over 4 months now and am close to admitting defeat, I believe the problem may be beyond me...
I believe you should be posting at General Kaiser Forum instead
My strongest suggestion is go back to factory (OEM) including the SPL and ROM, so you can be sure it's not ROM/Radio. If that's ok, then you need to carefully match the Radio/SPL/ROM. Some radio is only for WM6.0 (check the Radio FAQ, included on the sticky FAQ thread).
Ok I have made a bit of progress but would like some advice. Now that I am aware of the 3G fault I have been keeping an eye on my signal and each time just before the signal dies the phone is trying to switch from gsm/edge to 3G/HSPDA. I have flashed my rom again this time with a reconstructed T-mobile UK rom that I found through the revert to original rom and SPl for waranty returns (Thanks a lot jcespi2005). I now have a 3G/H signal (phew atleast my phones not bricked) but am unable to make or receive calls, I assume this is because it is set up to use T-mobile settings not O2. Is there a cab out there that would let me change the settings for the OEM operator rom so I can keep this working rom. Failing that does anyone have any suggestions for a cooked rom for O2?
Hello everyone,
I have done a ton of google searches and spent about an hour reading through threads of people with similar problems. I have flashed a few roms and different spl/radios etc. Nothing seems to fix the problem.. Nor have I seen anyone in a post had their problem fixed either - they were just criticized and told to search the forums or read a generic faq on flashing radios..
Anyways, after reading all that and trying a few different radios nothing seems to help.
My device, while connected to 3G, can usually make 1 call when it first connects, then each call thereafter will fail with a beep beep beep.
I am running 3.29.Hard spl
Rom Version TPC_V10_MEGA WWE
Radio Version 1.70.18.02
Protocol Version 25.83.40.02W
Has anyone found a successful combination to correct their issues with the 3g network and their tilt? If you have no issues and have the same phone please post your build.
I have flashed from original roms and a few diff radios to no avail .
I really want my damned 3g to work.. and no I dont want to just manually switch to EDGE (which is what I have my phone forced on now).
Thanks in advance.
same here
I have had the same issue. The phone will show H or 3G and you cannot make a call. I have just accepted using the edge system to keep the phone working fine. The only thing you loose is the faster internet speed the phone otherwise works fine. I have assumed that I dropped the phone and something happened to the antenna. I contacted HTC about the issue and they say it is a hardware issue even though I have seen many speak of the same issue. I have the tilt.
I thought I did the same thing until I started searching and see that there are numerous people with the same issue.
I will just be patient and wait until a new winmobile phone comes out with a oversized screen! Hope the next xperia is that
Radio Issue
I had the same problem with that radio. I changed back to the 1.65 radio and everything worked properly again. I hope this helps.
See my sig for what I am running. I have run TPC's roms as well as others and almost every 6.1 compatible radio there is and have never encountered that problem.
Have you tried to go back to stock everything, rom radio and spl to see if that makes the difference ?