hi all.i have kaiser with Dutty's diamond v1 rom with 1.58.25.17 radio.after flash my phone and installation of spl 3.28,my kaiser execute soft reset.if any know why please help me.if run opera and other program.thanks...i have to say that install spl after flash my rom.doing soft reset not all time but after run some programs.
pap1_vri said:
hi all.i have kaiser with Dutty's diamond v1 rom with 1.58.25.17 radio.after flash my phone and installation of spl 3.28,my kaiser execute soft reset.if any know why please help me.if run opera and other program.thanks...i have to say that install spl after flash my rom.doing soft reset not all time but after run some programs.
Click to expand...
Click to collapse
Try to post this question in the Dutty's diamond v1 rom thread.
Please do as Mikulec suggested. More users are likely to see your question and be able to help you. Thank you.
Related
Hi everybody,
I have a problem with my pocketpc.
I have flashed my trinity with the radio version 1.41.00.11 and the ROM WM6 2.2.
At this step, all is OK but when my pocketpc restart, I have the HTC screen and next the pocketpc is blocked with a write screen.
I have done a hard reset, and the result is the same.
Can you help me, please ?
Thanks a lot.
Flash again the rom
thanks for your response
I can't flash again because the pocketpc is unavailable
I can't access to the phone explorer via windows
Do you know by which way I can flash ?
Thanks
you might find the answer here http://trinityguides.info
Hi guys,
this is one of my first post here but I read you everytime. So, the problem now is: my P3600 don't want to flash with any rom.
I've just take it back from assistance for to change the black cover (2nd time...) and when I want to flash, as before I was given to the assistence, with udK 6.1 rom it don't want to flash with any other roms!!
I've now download the Lite version of udK 6.1 and install it but when I've discovered that I prefer the full version that's start the never ending story: I tryed to flash with Full version 2 or 3 time already, the installation goes to 100% but when it restart (should it restart not power off?!?) the rom is always the same Lite version. I tried to use also the official wm5 from HTC without manual entry into bootloaded but after flashing is 100% the rom is always udK 6.1 Lite. I have SPL Olipro 1.20 installed (in the past I've had no problems at all!)
Anyone can help me to flash (with lowest risks) my P3600 again?
Thanks to everybody!
no ideas guys?
so no one can help me with an idea???
What version is your Trinity? P3600 or P3600i? Just to confirm eventhough you mentioned P3600 in the subject.
jackkkkk said:
What version is your Trinity? P3600 or P3600i? Just to confirm eventhough you mentioned P3600 in the subject.
Click to expand...
Click to collapse
it's a P3600
Do a hard reset and flash an OFFICIAL ROM from SD-card
Switch to Des' Crash Proof SPL and try flashing the ROM straight from SD card.
This should work.
thank you very much. I've already tried to change to Des Crash Proof but at about 13%-14% it gives me an error when I reboot by softreset the system is always the same. Is it normal? Is there a specific procedure to change SPL software?
If it works at all after SPL flashing, then you must have followed all procedures. Try flashing Olipro's SPL and scan for bad blocks in flash.
nightblade said:
Hi guys,
this is one of my first post here but I read you everytime. So, the problem now is: my P3600 don't want to flash with any rom.
I've just take it back from assistance for to change the black cover (2nd time...) and when I want to flash, as before I was given to the assistence, with udK 6.1 rom it don't want to flash with any other roms!!
I've now download the Lite version of udK 6.1 and install it but when I've discovered that I prefer the full version that's start the never ending story: I tryed to flash with Full version 2 or 3 time already, the installation goes to 100% but when it restart (should it restart not power off?!?) the rom is always the same Lite version. I tried to use also the official wm5 from HTC without manual entry into bootloaded but after flashing is 100% the rom is always udK 6.1 Lite. I have SPL Olipro 1.20 installed (in the past I've had no problems at all!)
Anyone can help me to flash (with lowest risks) my P3600 again?
Thanks to everybody!
Click to expand...
Click to collapse
Make sure that your SD card it out
Hi all,
I really got angry and I will break my phone...
I tried many Rom's but my screen sometimes freezing(but too much times)? Also softkeys freezing too...
What is the problem?
Please help me...
And any offer for me please, I need a rom very lite. (No manilla or something, just I want Htc Home and stable)???
Thanks...
ccmaniac said:
Hi all,
I really got angry and I will break my phone...
I tried many Rom's but my screen sometimes freezing(but too much times)? Also softkeys freezing too...
What is the problem?
Please help me...
And any offer for me please, I need a rom very lite. (No manilla or something, just I want Htc Home and stable)???
Thanks...
Click to expand...
Click to collapse
You probably have the wrong SPL installed. If you flashed a ROM using Olipof's HardSPL v1 and are using a WM6.1 ROM, you need to upgrade your SPL.
Flash cmonex's latest 3.* Hard SPL's from here: http://forum.xda-developers.com/showthread.php?t=420683
Thanks
Dave
I have installed 3.29
(I have download Kaiser-HardSPL-3.29-force-USB than install with KaiserCustomRUU.exe, isn't it?)
ccmaniac said:
I have installed 3.29
(I have download Kaiser-HardSPL-3.29-force-USB than install with KaiserCustomRUU.exe, isn't it?)
Click to expand...
Click to collapse
Instructions in Post #2 here: http://forum.xda-developers.com/showthread.php?t=396922
There are two sets BTW.
Ta
Dave
Which version do you offer me for WM6.1?
I saw something in cmonex " 3.29 is still very strongly recommended over 3.56, unless you have OS freezing issues with 3.29. "
ccmaniac said:
Which version do you offer me for WM6.1?
I saw something in cmonex " 3.29 is still very strongly recommended over 3.56, unless you have OS freezing issues with 3.29. "
Click to expand...
Click to collapse
If you are using a ROM based on a HTC Rom (which most cooked ones are) then 3.29. For ATT based ROMs then 3.56.
If you don't know, use 3.29, and if your not happy try 3.56
Dave
I think my instalitation is not true, right?
Just get the zip file then run KaiserCustomRUU.exe???
ccmaniac said:
I think my instalitation is not true, right?
Just get the zip file then run KaiserCustomRUU.exe???
Click to expand...
Click to collapse
Read the instructions I posted. I am not copying them out
Dave
3. insert the microSD in the kaiser, then reset kaiser. (I did soft reset???) But not start 4
4. it should say Loading / Update in progress then reboot to a screen saying SPL 1.00.OliNex.
5. it should now flash in the KAISIMG.NBH. and will reset.
6. at this point it should boot to the OS, if it doesn't, then flash an OS. (of course delete the previous KAISDIAG.NBH and KAISIMG.NBH from the sd card and remove sd unless you opt to flash the OS from sd too)
I did't do that with http://forum.xda-developers.com/showthread.php?t=420683
But I think I have made it with http://forum.xda-developers.com/showthread.php?t=396922.
Now I will flash Radio and Rom...
Thanks...
Using Dutty's Rom WM6.1 Hybrid v2 5.2.19716/5.2.19700 and works GREAT...
got the same problem, some one say i got a lot of progam runing and the os cant go well, i think i fix it setting X button to really close apps and dont go background
Hi folks!
I had the same problem: change my at&t tilt rom/radio/spl to htc.
result: touch screen does not working!
The only way that i found is undo changes:
1º - installing and using: Remote screen Alignment to skip the first screen calibration. Just power on Tilt and wait until activesync are connected, so, run "remote screen alignment" and click skip, if the phone does not restart, do a soft reset.
2º - In the next power on, use activesync to copy JumpSPL1.56-KAIS.exe to your phone.
3º - use the buttons to navigate and execute JumpSPL1.56-KAIS.exe on the phone. (to execute JumpSPL1.56-KAIS.exe file use the ENTER key of the sliding keyboard).
4º- now just replace RUU_Kaiser_CINGULAR_WWE_.exe (OEM ROM i think)/ bootloader spl1.93.0/1.56 (maybe the screen problem occurs due the wrong spl/rom combination or newer spl like 3.28/3.29 ).
After these steps my AT&T Tilt touch screen is back to work!
Now i'm ready to try others roms again !!
PS: Sorry for poor english, if anybody don't understand anything just ask!
Hi everybody
I've upgraded my BlackStone to ROM 1.57.831.1 (47324)
But After the complete proccess, the function phone is off.
I can't active the phone.
could somebody help me with this?
Thanks....
have you hard spl version 1.14 your phone ? try to upgrade to hard spl 1.56
dmonium said:
Hi everybody
I've upgraded my BlackStone to ROM 1.57.831.1 (47324)
But After the complete proccess, the function phone is off.
I can't active the phone.
could somebody help me with this?
Thanks....
Click to expand...
Click to collapse
Do you have any other symptoms i.e. green screen issue?
Sounds like you haven't used USPL or HSPL before upgrading rom. 2 main symptoms are phone function not working and green screen/distortion issue.
If you follow cRaCKwHoRe's guide (see my signature) you'll be fine
[SOLVED] Phone Off in ROM 1.57.831.1 (47324)
thanks friend
I can fix the problem
I needed the hard spl 1.56 for this ROM.
Now, The BlackStone is operating excellently
hi
i thought that wm6.1 is faster than wm6.5 so after hardspl flash my new topaz with wm6.1 rom but it didn't start .after soft flashing and rest just shows startup picture and restart again .so i had to reflash it to wm6.5.
the question is how can i use wm6.1 and???
thanx in advanced
farzad23 said:
hi
i thought that wm6.1 is faster than wm6.5 so after hardspl flash my new topaz with wm6.1 rom but it didn't start .after soft flashing and rest just shows startup picture and restart again .so i had to reflash it to wm6.5.
the question is how can i use wm6.1 and???
thanx in advanced
Click to expand...
Click to collapse
I think you would need to downgrade your SPL.
So you would need to reinstall SSPL, then just install HSPL 1.83, then the 6.1 ROM. You will probably have "commercial use" issues to reinstall 1.83 so I would send the Olinex team an e-mail first before trying.
thanx Bruce Inman for u'r reply.i'm waiting for
hi Bruce Inman
I did what you said before.downgarde hard spl to 1.8 ver and then flashed my topaz with wm6.1 cocked and stock but didn't work. in boot session reboot cycling occur.
downgrading spl is not necessary i think, because i have also downgraded 6.5 to 6.1 last week, and my topaz got the latest hspl. last year i downgraded my kaiser to 6.0 and 6.1 with the latest spl.
i think the rom image you acquired is damaged, try re-downloading it
@Carrier
hi
i tested many rom cocked and stock .when i bought this damn topaz it was wm6.5
i think all fu... HTC are slow ,unstable .
I tried the same my self with official ROM from HTC. I didn't have to downgrade SPL because my phone for some reason is unable to be flashed HSPL Olinex ??
Operation run smoothly but after finishing topaz entered a constant reset loop after boot screen
I run out of ideas ...