Database Develop

Another QuickGPS problem..

I'm running a tilt that as of yesterday I'm not able to update QuickGPS, it says "expired".
I'm getting the "connection failed" message, it seems to be related to the "expiration" notice of QuickGPS since it worked fine for nearly a year and a half so has there been a definitive fix for this? I've read through the prior postings and tried a couple of the fixes with no luck...
Can I just change the entry in the registry that effects the time/expired notification?
Any other thoughts?
Thanks.
TW,

tiger.woods said:
I'm running a tilt that as of yesterday I'm not able to update QuickGPS, it says "expired".
I'm getting the "connection failed" message, it seems to be related to the "expiration" notice of QuickGPS since it worked fine for nearly a year and a half so has there been a definitive fix for this? I've read through the prior postings and tried a couple of the fixes with no luck...
Can I just change the entry in the registry that effects the time/expired notification?
Any other thoughts?
Thanks.
TW,
Click to expand...
Click to collapse
Old problem , but this worked for me, read this thread
http://forum.xda-developers.com/showthread.php?t=333275&page=9
Post 83
SH4Y's QuickGPS Fix.CAB

Yes, that was the fix I tried... I assume it just resets the registry settings.
No luck by the way with that one...
TW,

tiger.woods said:
Yes, that was the fix I tried... I assume it just resets the registry settings.
No luck by the way with that one...
TW,
Click to expand...
Click to collapse
Have you tried the one in Kaiser Tweaks ?

Not familiar with that one? do you have a link to the discussion?
Since I am currently connected via the usb port it appears to still be trying to connect via 3G, why doesn't it know to use the internet connection? Is there a place to set default connections?

Well after jacking with this thing on and off through out the day I finally got it to work.
I connected to the internet via wifi and tried to update QuickGPS same problem, no connection. So, I opened the internet with IE and got a web page, then tried updating QuickGPS, it worked! After that I closed IE and tried updating QuickGPS again and it worked...
So, I tried doing the same with a connection via USB and now I notice that I can't surf the web...? it says "connecting" or "locating"... where is this information stored so I can make the changes necessary?
Thanks,

[Q] "New Connection Setup database found. Do you want to install it"

About once every minute I receive a message on my screen saying “ New Connection Setup database found. Do you want to install it?”
I push yes and it downloads about 14% stops and says server error.
My question is what to do with this? How do I disable?
Thanks for the help!!!
Mod Edit MDAIIIUser
Changed the title to reflect the problem

think i found it
http://forum.xda-developers.com/showthread.php?t=339066
Update... This wont work on the Touch HD. Any ideas??

kevinniven said:
http://forum.xda-developers.com/showthread.php?t=339066
Update... This wont work on the Touch HD. Any ideas??
Click to expand...
Click to collapse
I have exactly the same problem. Been driving me nuts Whatever I do, whether I am on HSDPA or WIFI connection, it never gets further than 66% (that's the max I ever obtained) - I've tried at least 20 times and would really like to know if there's a way to get rid of this thing. I tried disabling the auto configuration, but I can confirm (as per above) that this does not work on the Touch HD.
Naturally, HTC refers you to Microsoft. I haven't contacted Microsoft because I thought I'd first find out where this comes from.
Any ideas/tips/solutions!???????????
Thanks!

This thing also bugging me alot...disabling the auto configuration doesn't work...May be some know any tweak for that...

I happened to me. I managed to download the database connecting the phone to a desktop with DSL connection. It installed something (I don't know what) and since then I don't have the messages anymore.

kevinniven said:
About once every minute I receive a message on my screen saying “ New Connection Setup database found. Do you want to install it?”
I push yes and it downloads about 14% stops and says server error.
My question is what to do with this? How do I disable?
Thanks for the help!!!
Mod Edit MDAIIIUser
Changed the title to reflect the problem
Click to expand...
Click to collapse
Please have a look at this thread: http://forum.xda-developers.com/showthread.php?t=453383
This is being discussed there, maybe some posts can help you.
Regards
K_Hismoom

So far there's no working solution for this. Some people have managed to download the database, the phone rebooted itself (keep this in mind, because you'll lose any open and unsaved data) and a new connection rom version now shows up, without any visible impact.
But most of the people just cant download the whole database (me included). Seems to be related to the fact that many people are trying to download at the same time. Maybe try doing it at some wicked hours when the load is lower.

Rozenthal said:
... Some people have managed to download the database, the phone rebooted itself (keep this in mind, because you'll lose any open and unsaved data) and a new connection rom version now shows up, without any visible impact.
But most of the people just cant download the whole database (me included). Seems to be related to the fact that many people are trying to download at the same time. Maybe try doing it at some wicked hours when the load is lower.
Click to expand...
Click to collapse
yes, that's true.... I got also the same problem, but fortunately I was wide awake at 5 a.m. and my HD manage to finish complete database download, after which phone auto rebooted and now there is no more message “ New Connection Setup database found. Do you want to install it?”.
after this update I didn't notice any significantly changes ....

Everyone connect the phone to activesync using a pc that has internet connection and then press update on the phone. It will use your pcs internet to download it and it will go successfull.
I tried to download with my HSDPA and my WIFI but no luck. As soon as connected on activesync it started to download and finished 100%

ActiveSync (Direct Push) randomly disconnects

Hi there,
I'm using my own 6.5 (custom) Rom (Build 23004). I use an hosted exchange
server for Direct Push. Syncing is working well without any errors. But sometimes
it just looses the connection and Active Sync tells me: "Last synchronized: ...".
Then i hit Synchronize and it stays connected for some time again.
This happens to me since a long time, I can't remember if this happened to me
using 6.1 Builds. But as far as I know I didn't get this issue using the stock Rom.
This issue is really annoying as WiMo doesn't even notify me about loosing the
connection, and then even "check email every X minutes works better.
Does anyone know a solution? I don't like to get back the "ugly" stock Rom.
P.S: I read some guys using a Tilt had this issue as well, if not using the AT&T
stock Rom, but the HTC one.
Edit: In the Attachment is the Active Sync log. Disconnect was at 10:35. Don't know if this helps.

Diewi said:
Hi there,
I'm using my own 6.5 (custom) Rom (Build 23004). I use an hosted exchange
server for Direct Push. Syncing is working well without any errors. But sometimes
it just looses the connection and Active Sync tells me: "Last synchronized: ...".
Then i hit Synchronize and it stays connected for some time again.
This happens to me since a long time, I can't remember if this happened to me
using 6.1 Builds. But as far as I know I didn't get this issue using the stock Rom.
This issue is really annoying as WiMo doesn't even notify me about loosing the
connection, and then even "check email every X minutes works better.
Does anyone know a solution? I don't like to get back the "ugly" stock Rom.
P.S: I read some guys using a Tilt had this issue as well, if not using the AT&T
stock Rom, but the HTC one.
Edit: In the Attachment is the Active Sync log. Disconnect was at 10:35. Don't know if this helps.
Click to expand...
Click to collapse
For some time now I use 6.5 ROMs together with hosted Exchange and the problem you discribe hasn't occured to me once (been using 6.5 builds for about 3 months now).
Have you contacted your hosting provider? Maybe it's a setting in Exchange that causes the disconnect.

Not yet, I didn't think it was related to them. I'll write them a mail tomorrow, too late right now. A good input.
At least I know right now the problem isn't related to wm6.5 custom Roms.
Thanks for your answer.

Alright, I'm getting closer now.
Just taping "Synchronize" doesn't reestablish the connection. The last time the
error was probably related to bad signal (more later).
Yesterday evening the connection was lost again. It happened at 20:40. I
noticed it at about eleven o'clock and see there was no data connection. I
told active sync to synchronize, but it took twice until it finally established a
data connection. Syncing didn't work either. So I tried to access the web using
Opera, but no page was loaded, it just showed me the white screen, no error
message.
So, I turned the Phone on and off in Comm Manger, then it was working again.
I checked the log and it gave this line:
#2009-07-18 21:02:26.0000 AutdPing Ping received. HR = 85020003
At 21:02, there was the first sync attemp after the sync at 20:40.
The error code 85020003 tells me there is something wrong with the data
connection (conn mgr).
In Active Sync I get the error code 0x80072efd which is also related to
network problems.
So the problem is more complex I originally thought.
I'm really confused right now. Please, somebody got an advice?

Googled a bit trying to figure out what the error code means, some state you need to uncheck the proxyserver checkbox in your advanced connection settings. Others say uncheck the use SSL connection in your activesync settings. But none seem to be a conclusive solutions for everyone, so you can a least try.
Will try to find more....
gl

Thanks for your commitment Lokatho.
I've been searching a lot, but didn't find anything that seems to be related to my problem.
I think this behaviour isn't related to Active Sync actually. It rather seems to be a
problem with the connection. All articles I found only describe errors coming from Active
Sync itself.
The weired thing is that toggling the Data Connection on/off doesn't help. My device
won't connect to the Internet any more (using 3G/GPRS). Only disabling and reenabling
the phone makes it work again. The error only appears after hours of usage up to a day
or more.
Seems like I need to return to stock rom for further investigation soon.
PS: Didn't contact my hosting provider as I'm moving to a better (cheaper, more storage, exchange 2007 instead of 2003) one right now, let's see.

Alright, I think I found the solution. I disabled HSDPA/HSUPA as my phone
only wanted to connect to my carrier data connection if this option was unused.
Now I turned it on again, my data connection was still working, and the issue
seems to be gone! Now I have to wait further (working for 2 days now). I'm
really happy now it's gone. Remember this if your running into strange
problems with your data connection

Running CyanogenMod-4.2.4 need to activate over wifi

I have successfully flashed my phone with the CyanogenMod-4.2.4 rom, enabled WIFI and can browse the internet.
BUT, when I try to activate my Gmail through the activation wizard with WIFI enabled I get the following error message: “Can't establish a reliable data connection to the server.”
I am using a T-Mobile pre-paid account, which means I don't have a data plan, so activation over WIFI is my only option.
Any suggestions on how to fix this would be greatly appreciated.

cybo13 said:
I have successfully flashed my phone with the CyanogenMod-4.2.4 rom, enabled WIFI and can browse the internet.
BUT, when I try to activate my Gmail through the activation wizard with WIFI enabled I get the following error message: “Can't establish a reliable data connection to the server.”
I am using a T-Mobile pre-paid account, which means I don't have a data plan, so activation over WIFI is my only option.
Any suggestions on how to fix this would be greatly appreciated.
Click to expand...
Click to collapse
strange it should work maybe your connection is the prob? Try flashing the rom again.

Ace42 said:
strange it should work maybe your connection is the prob? Try flashing the rom again.
Click to expand...
Click to collapse
Frustrating is more like it. I have spent days search this forum and the web for an answer.
I started out with CyanogenMod-4.2.3 installed and I thought that might have been the problem so last night I flashed 4.2.4 and still have the same problem.
I can browse the internet so I have a hard time believing it is a connection problem. I did come across a post earlier this week where someone was having issues with his WPA2 connection. Later today I will change the connection type and see if that fixes the problem.
If you can think of anything else I might try that would be great.
Thanks for the quick reply.

cybo13 said:
Frustrating is more like it. I have spent days search this forum and the web for an answer.
I started out with CyanogenMod-4.2.3 installed and I thought that might have been the problem so last night I flashed 4.2.4 and still have the same problem.
I can browse the internet so I have a hard time believing it is a connection problem. I did come across a post earlier this week where someone was having issues with his WPA2 connection. Later today I will change the connection type and see if that fixes the problem.
If you can think of anything else I might try that would be great.
Thanks for the quick reply.
Click to expand...
Click to collapse
I changed my WIFI settings to WEP and WPA but still got the same error. Any more suggestions would be great.

The problem is probably due to gapps failing
keep trying and maybe it will go through

B-man007 said:
The problem is probably due to gapps failing
keep trying and maybe it will go through
Click to expand...
Click to collapse
I finally got it to work and for those who may run across this thread with the same issue here what I did:
I ran across a thread on a different forum that stated the reason I was having the problem was because I skipped the initial activation process when the phone was first turned on. Well with CM4.2.4 and other rooted roms there is an option to skip the initial activation process, which I did.
So I went back and reread the other threads about how to activate your phone over wifi and they all state the same thing, you will need root access, which allows you access to execute debug commands from your PC to control your phone.
So I did a hard reset and re-flashed CM4.2.4. Then after I rebooted my phone I followed the instruction on this thread http://modmygphone.com/forums/showthread.php?t=9471 to turn on the wifi. Once the wifi was on I disconnected my phone from my computer and proceeded to activate it, which worked like a charm.

Active Data connection but no connection to Internet

Hi,
I've got a problem and don't know what to do.
My phone is reporting a data connection (and reports that it's connected) but every program accessing the Internet fails with an error message that there is no connection.
Does anyone know whether there is a tool to check for an actual connection or maybe get a log of what exactly the phone is doing?
Any help to solve this would also be appreciated
Yes, the connection has worked before

FrozenLord said:
Hi,
I've got a problem and don't know what to do.
My phone is reporting a data connection (and reports that it's connected) but every program accessing the Internet fails with an error message that there is no connection.
Does anyone know whether there is a tool to check for an actual connection or maybe get a log of what exactly the phone is doing?
Any help to solve this would also be appreciated
Yes, the connection has worked before
Click to expand...
Click to collapse
Are still able to get email or update weather? If so I suggest uninstalling and then reinstalling your internet browser(s). Have you tried a cleanup utility like ClearTemp or SKTools? That may help.

No, I actually couldn't use anything that was using the data connection. It all failed, stating that there was no data connection.
The only thing that (kind of) "repaired" it was doing a hard reset...
Fortunately, I haven't experienced the problem since