Hello,
I have one problem with my diamond, he puts me " emergency phone calls can be made " There is a space of grabbing and an unlock button. Impossible to go farther, anybody has already met this problem?
PS: It me made this, after the first restart but i haven't enter a password.
where did you buy it? Was is suposed to be simlocked? Did you buy an unbranded device or from some carrier?
If it should be simunlocked then hard reset it and see what happens.
Hard reset and it's good
I love this phone
Related
I installed Sprite Terminator to protect my phone and now when i power it on it asks for a password before i can use the device. I have never set a password since having the system board replaced by HTC just before christmas
As part of the Sprite installation it asks you to specify an alpha numeric password which i did but the password on device startup will only allow numbers.
Anyone know if there's a default device password on the kaiser or any possible way to get round this.
Thanks.
spooki37 said:
I installed Sprite Terminator to protect my phone and now when i power it on it asks for a password before i can use the device. I have never set a password since having the system board replaced by HTC just before christmas
As part of the Sprite installation it asks you to specify an alpha numeric password which i did but the password on device startup will only allow numbers.
Anyone know if there's a default device password on the kaiser or any possible way to get round this.
Thanks.
Click to expand...
Click to collapse
did you try to type your PIN?
I've tried my normal sim pin number but this is a lock on the phone not the sim card.
Sprite terminator protects against hard resets as well so i don't think that is an option
spooki37 said:
I've tried my normal sim pin number but this is a lock on the phone not the sim card.
Sprite terminator protects against hard resets as well so i don't think that is an option
Click to expand...
Click to collapse
Try to contact the support for sprite terminator and ask if there is an default lock number.
I've sent sprite support an e-mail to see if they can help, didn't know if HTC had a master unlock code or something,
Looks like the phone will be going back to HTC again if not
You can always just hard reset it by holding the two soft keys and using a stylus.
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets
or if you cant do that maybe you can reload the rom via SD card. that is if you can get to bootloader.
Thanks guys for the help, it's anti theft software so it stops a hard reset so that isn't an option, the phone is running the original HTC rom as i have not flashed it since getting it repaired.
it boots up in the normal way and activesync will connect to browse the files on the device but just cannot get past the device lock.
Is it still possible to reflash the phone via the SD card as i have not done a hardspl or anything ? i can get to the screen with 4 colours and is says
KAIS130
SPL-1.93.0000
CPLD-8
And it says USB at the bottom of the screen
My current rom is
Radio 1.27.12.32
Protocol Ver. 22.45.88.07h
Rom 1.56.00.00
boot it in a tri colour screen
hold two soft buttons(line next to green and red button) and stick in the stylus at the same time
release the stylus hold the buttons
when you see the confirmation screen release buttons and confirm the Hard reset.
that should work, I dont see how can a program disable a hard reset when the OS is not booted up.
good luck
How do I remove the Device Lock?
Please write step by step. Which are the keys. Please don't point me to some other page...
Which are the soft keys??
I have tried Hard reseting this htc.
Nothing! goes to Serial for color mode
Hi today I had this strange issue with my 8125 I turn it off and then when I turn it back on on the simm screen where you put the pin it came with asteriks by its own, I hit clear but still they came back I had to cancel the cellphone part and then go back and put the pin number in order for the phone to work or if I enter the note option it keep by putting Im not shure if it was ceros or O'ss like if a key was jam but the strange thing is that the phone is closed. someone there has any idea what is this related about. I hard reset the phone 3 times, I update to wm6 diamond but still the same issues I download the service manual tear it apart until I just had the motherboard and only the lcd contected to it and put the battery and still it keep doing this has anybody have any idea whats wrong with it. can some body help me with this!!!!!
Hi there,
I am just really ****ed right now. I got Swisscom 1.97 Rom installed successfully and just wanted to get rid of the STK Service Message by turning one registry value. Then after a soft reset it just hard resettet itself and completely ****ed up. No touchflo, nothing worked, data storage was completely full. Now it just doesnt turn on anymore, is stuck at the very first screen reading TOUCH DIAMOND and the version numbers, so no chance for me to get into bootloader.
What am I supposed to do now?
phew... after few tries i eventually got into bootloader with the hard reset combination (who in the world thought of pressing volume down, ok AND reset at the same time? i need three hands). reflashing now, hoping everything works well
fBx said:
phew... after few tries i eventually got into bootloader with the hard reset combination (who in the world thought of pressing volume down, ok AND reset at the same time? i need three hands). reflashing now, hoping everything works well
Click to expand...
Click to collapse
Um, that is the standard way to hard reset a HTC Touch Diamond and Pro when you cannot get into settings to do a hard reset just lke for the TyTn II you pressed one of the softkeys the end key and put the stylus in the soft reset little hole.
Everyone learns something new every day and this is your lesson for today.
Hello guy,
After flashing new rom (official release) on my Blackstone, works fine for a month, after start the home screen being black like the phone is off but he was not. I try first hard reset from the button located next to the sim card, splash screen appears after went black again. I did not realized is a problem with the screen and I perform a hard reset (volume up+down & power up) . The phone perform the hard reset because I heard the power up sound, plus for about one minute I have the screen on, asking me to make the screen line up. During the screen line up the screen went black again and no way to see it showing something again. The problem is in active sync the phone is not recognized anymore, I can't flash it again (I try run RUU but give a error message to connect the phone) plus I'm going blind without seeing anything on the screen. My question is there is any way to solve this problem.
Thank you in advance.
Although screen is black, you should still be able to get into bootloader by normal procedure (turn off device, hold vol down & then press power on). Once in bootloader try flashing (you may wanna try returning phone to stock rom as it sounds like your screen has become loose from motherboard and needs fixed under warranty).
To return to stock rom follow guidelines at bottom of first post in this thread.
Still not working
Thank you for the quick reply, I manage to flash it again with the original rom, but nothing happen, the screen is still black. Probably as you said is something wrong with the display. Another problem is I don't have any more warranty; maybe there is a solution to solve the problem?
The Blackstone is out for less than one Year. Your should really have warranty. oO
Yes you wright but I’m 10000 km from home where who knows where the receipt is. Still hopping there is a solution, maybe I can fix it somehow. By the time I get home the waranty is gone. Thanks.
open it up, and attach the ribbon cable back in, just take your time if you need the htc touch hd service manual, i have it. if you wish to use it let me know i will post it here.
That is going to be a big help because I never open up a phone, I watch couple of times some videos on you tube but that’s all about. Anyway I have to open it because I flash it with 3 different roms and still the screen is black. Even when flashing does not showing anything on the screen. I remember for my old blackjack I had a app called My Mobile to see the screen on your desktop I install that I so the splash screen , the align the screen but I couldn’t go more taping the screen of the phone by looking to the desktop.
Thank you for your help and I waiting for the service manual.
Thanks’ one more time.
You can get the service manual here: http://htcdriver.com/index.php?page=htc-blackstone-touch-hd-service-manual
Start downloading. Thank you
Keep us up-to-date on your progress so we can aid & assist if possible
Ta
Rick
Fallen Spartan said:
Keep us up-to-date on your progress so we can aid & assist if possible
Ta
Rick
Click to expand...
Click to collapse
Thank you,
First I have to find a place where I can buy the tools, probably in couple of days I let you know about the evolution of the HTC operation.
You dont have the possibility to contact youre retailer and require a copy of the receipt?
Since the phone got an IMEI number, you could probably just send them the phone and they'll see that you still have warranty on it.
I'd call them before sending the phone, also.. don't forget to restore the spl etc..
hello
I flashed my HTC touch pro 2 with hardsdl!!
I got a new rom Deep shining
I fill in the lock device with a code to get into the phone..
when I want into my phone I need to fill in first the code what I got filled in.
I slide to unlock first, then I get a screen with enter your password, emergency phone calls can be made. and there are all numbers to fill in my own password to get into my phone..
I fill in the password and push on unlock nothing happens .. when I fill in the wrong password and then push on unlock nothing happens...
normaly the phone comes with a alarm with this is the wrong password try again or something..
the lock device is bugged..
when I opened my phone with qwerty keyboard the screen is bugged to..
please help my out with this problems
so I can into my phone
I am sure that you've flashed the DeepShining X5 23544 and the error you met was already mentioned in DeepShining X5 bugs. I met that error too and my solution is to hard reset the TP2 because the pin lock in X5 23544 does not work and I could not access to my phone.