Its probably been asked before, in fact i saw someone post a link to the settings but for the life of me i cannot seem to find that post where it had the info for tmobile uk mms and internet settings.
Ive been to tmobiles wesbite and tried to forward the settings to my phone but all i get is a text message with a pin code anbd nothing else.
So does anyone have any ideas as to how to get the settings and where do i put them into the phone??.
thanks
APN: general.t-mobile.uk
username: user
password: wap
Go to setting - all settings - conections - connections
Thanks again mate...i know u mentioned it in another thread but cant seem to find it...nevermind i knew you would come to my rescue
Install the attached CAB for internet and MMS settings installed on your phone for T-Mobile UK. Works great.
Thanks mate...looks my Diamond dying ie the battery meter just popped up a warning that my battery is low....oh well didnt really get much of a chance to charge it when i took it out of the box this morning. In a way its good though as i can drain the battery properly then give it a good fresh charge.
Related
My girlfriend just bought me a att tilt/kaiser/8925 and I have Tmobile. I have unlocked the phone and am now having trouble getting it to connect to the internet, I have tried the settings from my old mda to connect through wap but I get an error every time. Also I dont know if I need to change mms setting or anything else, please someone help, I have been reading these boards for years and I cant find anything about usa tmobile settings
Look at the thread for the q-mobile rom in the upgrading section and theres settings there. theres also a cab that automatically sets up the settings which worked for me but its said that they are wrong.
I have a verizon touch pro 2 that is running on tmobile network. I have the mighty rom and the arcsoft cab but I do not know the setting to set it back right. When we first did this we had it set and the mms worked perfect. Then the phone reset to verizon some how. When I set it back to tmobile the mms setting were messed up. Does anyone know what I need to set the phone to. A guy did all the work and now I am having trouble getting the info from him so I have to figure this out alone.
Thanks
I had a similar problem. I got the phone unlocked but I never had the settings. It took forever but I eventually by luck got the right exact settings I needed. I have a sprint TP2 with Tmobile service. I dunno if the phone will matter but it should work. Here is the link to the post and follow the instructions for the settings that someone posted for me. It work and Im grateful.
http://forum.xda-developers.com/showthread.php?t=686515
Davano said:
I had a similar problem. I got the phone unlocked but I never had the settings. It took forever but I eventually by luck got the right exact settings I needed. I have a sprint TP2 with Tmobile service. I dunno if the phone will matter but it should work. Here is the link to the post and follow the instructions for the settings that someone posted for me. It work and Im grateful.
Click to expand...
Click to collapse
I just tried the setting in there. I have to go to work so I will post back tonight if it worked or not.
ok. lets hope it does
So far no. Now it is saying that it "Dialed epc.tmobile.com can not connect for an unknown reason. "
I also tried wap.voicestream.com and the same thing. I need help it wont connect.
it also will not let me connect to anything data so it seems to be my data connection causing this problem
it says that for me sometimes too, but mines work anyways. did u do the same data(T-Mobile Data) for both internet and private (when it says "programs that automatically connect to"). Both should be the same exact setting. After u do the whole process for internet just pick T-Mobile Data in the drop down for Private cause it has the information u just configured.
I did do that. And I had nothing. BUT this morning it worked. I did nothing diff from lastnight. It just started to work and has worked all day. I do not know what or why it all of a sudden worked. Oh well it works now.
Thank you for your help.
No problem . Your very much welcome.
-----------------------------
Ok so i have a sprint HTC hero on boost mobile, only way i got that to work was to change the meid off the sprint phone and input the meid of a phone already on the boost mobile network
i did this months back and have had this same issue all the time. since there has been so much activity recently i decided to ask again. perhaps someone can help now
-----------------------------
i receive mms just fine but cant send them, i have worked around this by simply emailing the pictures, but i would like to have it working now that i just upgraded to the android 2.1 bittersweet v1.2 rom.
im pretty sure its as simple as changing the url/proxy the phone attempts to send the mms with, the problem is how.....
if u navigate to the Messages app>hit menu>settings>connection settings> the MMSC field displays "http://mms.sprintpcs.com"
im pretty sure changing this to the url for boost will fix my mms problem. but the field is greyed out and i cant change it!
anybody know how to change this any possible way? there has to be something that can be done
so i figured it out, that setting is in the ##data# menu, i guess when i copied all the settings from the boost phone onto the hero that url worked for the boost phone but not for the hero, go figure.....
i guess it depends on the phone used to connect to boost. anyways i figured out the url could either be the http://mms.sprintpcs.com which is what my old phone had or http://mm.myboostmobile.com which is what fixed my hero mms =)
now if i can just figure out why i can only get 1x internet speeds and not 3g speeds.....
BOOST MOBILE IS AWESOME!!!
=)
40$ a month due to a grandfathered plan for unlimited talk/txt/mms/1x web , with potential 3g web
I vote this topic get changed to better reflect the contents (running non-Boost CDMA android phones on Boost)
THE MAIN PROBLEM IS AFTER THE NEXT PARAGRAPH
All my problems started when i downloaded an application that was supposed to turn off the lock screen on my phone. After restarting the phone i realized that withour the lock screen it cant start. And so my journey began. As most posts are about the i9000 not the i9000m, it was incredibly difficult to figure out how to do a hard reset, which sucked. After that i figured, hey, why not update to 2.2? I did, using a rom called macnut r12. It didnt work, it would not let me use my sim card for 3g, calling or texting. I tried to reset my phone and it wouldnt work. So what i did was...
I tried to put 2.1 back on my phone, and ended up putting the i9000 version on, not the i9000m version. It's not that bad, except its missing a page of stock applications, wont let me use my 3g for some reason, and i just dont trust it. Does anybody know how to help me? I realize that if i send it in they will probably remove my warrenty and ill be double f***ed.
I used ordin3 v10 btw, so i could fix it with a pit, pda, and phone file.
*edit*
i might have found the solution! when i origionally flashed it i made a recovery using clockworkmods free app. Im going to install it and try to recover!
Personally I would flash this http://forum.xda-developers.com/showthread.php?t=845558
if your just looking to get a stock rom thats 2.2 made specifically for the i9000M.
As far as your 3g not connecting , your APN settings are most likly blank. You would have to fill them in manually.
Thanks
Im downloading the files now. If there is still a problem with 3g i will google it lol, but i also typed some code in the dialer and it said network data is blocked (or something along those lines)
...later...
I got it!! now i need to fill out the acsess point name? oh well, one step at a time, i guess.
Worst case scenario, i can just use rom manager to restore 2.1 from a backup (no, im not a moron, all the other firmwares wouldnt let me download it for some reason
i got it!
Its finally over! i got 3g again, thanks bell!
for anyone with the same problem go to settings/wireless and network/mobile networks/access point names menu, new, the first field put in bell and in the second one put inet.bell.ca.
reedpro said:
Its finally over! i got 3g again, thanks bell!
for anyone with the same problem go to settings/wireless and network/mobile networks/access point names menu, new, the first field put in bell and in the second one put inet.bell.ca.
Click to expand...
Click to collapse
You should have all of the following
Name: Bell
APN: inet.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC: http://mms.bell.ca/mms/wapenc
MMS proxy: web.wireless.bell.ca
MMS port: 80
MCC : 302
MNC : 610
APN type : internet + mms
reedpro said:
Its finally over! i got 3g again, thanks bell!
for anyone with the same problem go to settings/wireless and network/mobile networks/access point names menu, new, the first field put in bell and in the second one put inet.bell.ca.
Click to expand...
Click to collapse
LOL good job!! Although, if you had done a bunch of reading you would have found there are LOTS of information on here for fixing your problem (with the lost APN settings, and lost of internet) and you likely would have saved yourself some stress. lol if all else fails, download and re-install the stock JH2 rom (that came with your phone) and flash it 'usually' works for me!
reedpro said:
THE MAIN PROBLEM IS AFTER THE NEXT PARAGRAPH
All my problems started when i downloaded an application that was supposed to turn off the lock screen on my phone. After restarting the phone i realized that withour the lock screen it cant start. And so my journey began. As most posts are about the i9000 not the i9000m, it was incredibly difficult to figure out how to do a hard reset, which sucked. After that i figured, hey, why not update to 2.2? I did, using a rom called macnut r12. It didnt work, it would not let me use my sim card for 3g, calling or texting. I tried to reset my phone and it wouldnt work. So what i did was...
I tried to put 2.1 back on my phone, and ended up putting the i9000 version on, not the i9000m version. It's not that bad, except its missing a page of stock applications, wont let me use my 3g for some reason, and i just dont trust it. Does anybody know how to help me? I realize that if i send it in they will probably remove my warrenty and ill be double f***ed.
I used ordin3 v10 btw, so i could fix it with a pit, pda, and phone file.
*edit*
i might have found the solution! when i origionally flashed it i made a recovery using clockworkmods free app. Im going to install it and try to recover!
Click to expand...
Click to collapse
Glad you got it working again. Just an FYI, that ROM you flashed 'macnut r12' is for the US Vibrant, not the Bell Vibrant. Our phones are more akin to the international version. You need to stick with i9000 ROMs in the future, not from the Vibrant forum.
Glad you got it sorted out.
Trouble with my Lenovo K3 Note... Can ANYONE help me? Pleeease! Thanks in advance!
Hello, all! I am new to the site and have taken a few minutes to look around a little, and I must say... I'm super excited to get to interact with you all! I love learning new things and meeting new people who have some intelligence about them. I love phones [Android, of course!], and just about anything technical, however, I am new to all of the developers stuff but sooo looking forward to learning everything! I'm a quick learner and can usually so something after seeing it once, or being explained something once. Anyway, I'm sure you all are thinking "Get to the issue, woman!" (then again, you're probably not even thinking that lol). I'm here hoping and praying that I can get somewhere with my Lenovo K3 Note. I recently bought this phone form a guy who had it for about a month until his company provided him with a company phone, therefore he didn't need t any longer. I was stoked about getting the phone, it really looked like an awesome phone! Well, the guy I bought the phone from is obviously a tech guy as well because he was rooted the phone and put a stock ROM on the phone (I think I said that right?). I am with Straight Talk for my service, and while I've finally got my text message to work, no matter what I do with the APN settings (on a T-Mobile SIM), I'm not getting any internet or MMS. Can anyone help me, please?! I am sooo lost right now, and it's been two days that I've been working on this phone, hoping I can get it to work. I really, REALLY like this phone, and don't want to have to get another one. If anyone could please help me, I would be forever indebted! Seriously, I would be so grateful for any/all help! Thanks so much in advance, everyone!
I don't know that I can help you since I have no knowledge of T-Mobile or Straight Talk, but before anyone will be able to help you we need to know what ROM you are running. Go to 'Settings->About phone->Device information' and tell us what the Build number is.
NAR
try this...
The best bet would be to go to Settings>General>Backup and Reset...and tap on "Factory data reset" once.
Do this only if you have no important files/documents/picture on your phone memory.
Go to Settings>Connections>More networks>Mobile networks>Access Point Names and delete all the access points.
Then click on New APN and input the following for creating a new one:
Internet and Picture Messaging:
Access Point Name (APN): fast.t-mobile.com
MMSC Server: http://mms.msg.eng.t-mobile.com/mms/wapenc
Short Message Service (SMS)
SMS Email:[email protected]
SMS center: +12063130004
Email center: 500
Voicemail : +18056377243 (1-805-MESSAGE)
Android APN settings
From the Home screen, press the Menu key.
Touch Settings.
Touch Wireless & networks.
Note: This varies on different software versions.
Touch Mobile Networks.
Touch Access Point Names or APNs.
Enter the required APN information.
There are different APN types: default,supl OR default,supl,mms OR Internet+MMS
Default Android provides a text field (left image) to enter default,supl,mms. Samsung provides an Internet+MMS radio button (right image) to select.
When you are done, press the Menu key and Save.
Reboot your phone, and test out your internet connection.
Double check the words in RED.
Do let us know how you fare.
not a robot said:
I don't know that I can help you since I have no knowledge of T-Mobile or Straight Talk, but before anyone will be able to help you we need to know what ROM you are running. Go to 'Settings->About phone->Device information' and tell us what the Build number is.
NAR
Click to expand...
Click to collapse
Thank you. I hadn't realized anyone had responded to my post. The build number is VIBEUI_V2.5_1511_5.444.1_ST_K50-T5
freelancer81 said:
The best bet would be to go to Settings>General>Backup and Reset...and tap on "Factory data reset" once.
Do this only if you have no important files/documents/picture on your phone memory.
Go to Settings>Connections>More networks>Mobile networks>Access Point Names and delete all the access points.
Then click on New APN and input the following for creating a new one:
Internet and Picture Messaging:
Access Point Name (APN): fast.t-mobile.com
MMSC Server: http://mms.msg.eng.t-mobile.com/mms/wapenc
Short Message Service (SMS)
SMS Email:[email protected]
SMS center: +12063130004
Email center: 500
Voicemail : +18056377243 (1-805-MESSAGE)
Android APN settings
From the Home screen, press the Menu key.
Touch Settings.
Touch Wireless & networks.
Note: This varies on different software versions.
Touch Mobile Networks.
Touch Access Point Names or APNs.
Enter the required APN information.
There are different APN types: default,supl OR default,supl,mms OR Internet+MMS
Default Android provides a text field (left image) to enter default,supl,mms. Samsung provides an Internet+MMS radio button (right image) to select.
When you are done, press the Menu key and Save.
Reboot your phone, and test out your internet connection.
Double check the words in RED.
Do let us know how you fare.
Click to expand...
Click to collapse
Thank you so much for your response! I am not actually a T-Mobile customer, I am actually a Straight Talk customer, however, using a T-Mobile SIM card. I have set, reset, and reset my APN setting at least sixty-eight thousand times at this point (okay, maybe I'm exaggerating a tad bit, but it seems like it's been that many times lol), but it doesn't fix anything. Hopefully, talking with all of you (people who actually possess intelligence), I will get this worked out. I am far more confident in everyone on this site versus Straight Talk customer Service! Thanks, again, for your response, it's greatly appreciated!
Go here and fill in your mobile number and select Android 4 or later and click on search.
hxxps://www.straighttalk.com/wps/portal/home/support/apn
Click to expand...
Click to collapse
Replace hxxps with https
Alternatively, visit the link below and try out the steps
apn-settings.com/samsung-galaxy-s5-straight-talk-apn-settings-step-by-step-guide/
Click to expand...
Click to collapse
Note: settings are location/region specific. We could help you better if you state your location.
freelancer81 said:
Go here and fill in your mobile number and select Android 4 or later and click on search.
Replace hxxps with https
Alternatively, visit the link below and try out the steps
Note: settings are location/region specific. We could help you better if you state your location.
Click to expand...
Click to collapse
Yes, I have previously taken thee steps, and still a no go. It's definitely not the apn settings causing this because it shows on Straight Talks end that everything is in working order. They are sending me out a new SIM card, and going to try that. I honestly doubt that is the problem, but who knows? It's worth a try, I guess. I think it's some sort of setting or something from where the guy rooted my phone that is preventing the phone from being able to use it's data. I wish I were more educated on phone ROM's, Modems, etc... I haven't had the time to just yet, but I am most definitely going to educate myself more on this. Hopefully, I am able to figure out how to fix this, either on my own, or with help of someone from this site (which btw is freaking AWESOME!)!! Thanks, again, for your response, I greatly appreciate any/all help offered!
-Also, I am in Indianapolis, IN (USA)
Obvious suggestion: you're certain you have data turned on, right? I ask only because I find it far to easy to accidental change those toggle switches... fat fingers and touch screens are a bad combination.
Have you tried enabling data roaming? I had a phone that always thought I was roaming, so I needed to enable data roaming if I wanted data to work.
not a robot said:
Obvious suggestion: you're certain you have data turned on, right? I ask only because I find it far to easy to accidental change those toggle switches... fat fingers and touch screens are a bad combination.
Have you tried enabling data roaming? I had a phone that always thought I was roaming, so I needed to enable data roaming if I wanted data to work.
Click to expand...
Click to collapse
Yep! I have data enabled, however, I've accidentally bricked my phone, so I've moved on from this problem to a bigger one! lol I'm currently working on that as we speak.
Actually, I bricked my Samsung N8000 tablet too but got it working again.
Hopefully, it happens for you too.
Once its un-bricked, just download and flash the Official Stock ROM. Mine is an Indian version which is ROW (Rest Of World) ROM. Yours could be the K50-T5 and might be having a different Stock ROM.
Its better to start off with stock to fix those issues.
Merry Christmas!