Hello!I have installed Garmin Mobile XT on my HTC Touch Diamond.It worked fine and perfect 2-3 days.But when i've deleted and installed a new version the problems started.I put a maps in its program file directory and when i looked in MAP sets i saw them.But when I've clicked map view,I see the sentence:''No map".
When I put the base world map Garmin shows it,but other maps not!Help !!!
Related
Hey guys, so i had tomtom 6.030 that i used with my hermes. I got my kaiser a couple days ago and i put my microSD card from my hermes into my kaiser and ran TomTom off my SD card.
It worked well with the internal GPS and i decided to upgrade to 6.032 from the cab found on xda-devs. Upgrade went fine, when i started it and I selected my Texas map it kept asking me for my activation code which i couldn't find. So i shot off an email to TomTOm and while waiting for their reply i decided to download the free map tomtom was offering me.
I installed Austin_TX map, got my activation code from tomtom but now when i'm using any map and i tap "navigate to" my poi's are gone!
before i upgraded i had a ****load of pois, such as atms, restaurants, gas stations, etc... now nothings there
i know have to fire up live search, find the place i'm looking for, remember that address, start tomtom and manually enter the address which is very annoying. so how can i get my POI's back?
The POI's are held in the map folder, you should have a folder called 'Texas' or something like that.
Copy the POI's from that folder into your new 'Austin' folder and they should be back.
Tomtom on Kaiser with internal GPS
Just wanted to ask how you got the version of Tomtom to recognise the internal GPS on the Kaiser? I've taken the version 6 I used on my XDAIIs - loaded it onto the Kaiser and it refuses to see the internal GPS? if I load the demo version that comes with the Kaiser it see the GPS - anyone know how I can sort this one?
What is the best satnav software to have on HTC Diamond? I noticed that my Compaq IV has Co Pilot pre-installed (trial version), but I've always been using TomTom on my Vario II. I've noticed a lot of people tend to be installing on TomTom on the Diamond.
I spent about 5 hours yesterday trying to install TomTom v7 with GB maps but was not able to get the maps to show. I also checked several different walkthroughs how to install TomTom 7 to no avail.
So if anybody can help me on how I can get TomTom or if CoPilot is also recommended, how I can get this working fully?
where did you download tomtom7?
download again or try with other maps
I tried several different location each with their own walkthrough and it seems like it always works for others but theres always the few who just can't get the damn thing to work. I'm normally ok with stuff like this, i've got tomtom on my HTC tytn but now I have the Htc Diamond (compact iv) I would of liked to install version 7 of tomtom with working GB maps, with a straightish walkthrough of how to do this. Any help m8 or a pointer in the right direction would be appreciated.
tt6
I use tomtom 6 that was on my last phone (western Europe maps)
Installed np ..It works fine.. and its now much quicker to pick up satelites..
Guys, I need help in getting tomtom 7 on my htc diamond, i've followed the walkthroughs to do with how to get my tomtom id, thats sweet. but it's this bloody meta file, I can't seem to locate it with RunMeforAllAutomatic or RunMeforDCT, which I understand is meant to locate the meta file. I think i'm at the last hurdle to get tomtom 7 to see TTN_7.450.9028 which I hope is the maps for GB.
Any help would be greatly appreciate so I don't have to go into my second night of 3 hrs sleep
Wilsas said:
1) Install TomTom Navigator 7 with the TTN_7.450.9028.cab provided
2) Copy the folders RASTER and VOICES to the root of the storage card
3) Copy the folder of your map (e.g. Western_and_Central_Europe_V720_1803, not included in this package) to the root of the starage card
4) Start TomTom and look up your DEVICE ID from TomTom, which can be found in the file ttnavigator.bif on the starage card under DeviceUniqueID
5) Copy the file *.meta from your map folder and put it in the folder where you saved the downloaded files (I recommend C:\TTN7 for an easy use)
6) Open a command prompt on your pc and navigate to this folder
7) Execute the command
tt7_keygen.exe “path to the *.meta” “XXXXX-XXXXX”
where XXXXX-XXXXX will be your Device ID found before
Example:
tt7_keygen.exe “C:\TTN7” “XXXXX-XXXXX”
If everything succeeds, the patcher should return an "OK" message.
8) Now copy the new file *.meta.dct from this folder to the folder of your map on the storage card
9) Open TTN7
10) Enjoy!!!!
Click to expand...
Click to collapse
THIS IS NOT A ****ING WAREZ FORUM!!!!
I tried TomTom6, TT7, iGo, iGo8 & Navigon.
TT is stupid.
iGo8 is nice & fast but has absolute wrong speed infos, whyever.
MN6.5 is still the best choice for Europe.
sony007 said:
Guys, I need help in getting tomtom 7 on my htc diamond, i've followed the walkthroughs to do with how to get my tomtom id, thats sweet. but it's this bloody meta file, I can't seem to locate it with RunMeforAllAutomatic or RunMeforDCT, which I understand is meant to locate the meta file. I think i'm at the last hurdle to get tomtom 7 to see TTN_7.450.9028 which I hope is the maps for GB.
Any help would be greatly appreciate so I don't have to go into my second night of 3 hrs sleep
Click to expand...
Click to collapse
hi there ,
In a most respectfull way I will tell you this .. I have purchased tomtom for mobile and it works great on the diamond ... The problems you describe are due to copy protection .. If you insist on using priated cracked or keygened softwares , that is tottaly your choice and to be honest there are many valid reasons for using it .. however this fourm is particulary strict on not talking about things such as that .. so due to the forum rules you will have to go elsewhere for this kind of help ... I will however say that a quick search in the torrents will definatly help you .. I have had personal experince with the more reputable providers out there and can say it definatly matters where you get your info from .. if you get a build with the instructions Wilsas has already provided and it has the required exe keygen .. and you follow exactly what it says .. you will have no issues
if you do require further help , two options .. buy it , as anyone who gets good value out of anything should ... or if you are just testing it for usablity , you can install one free map upon install on your tomtom .. .. .. if you need the UK maps working .. well im me and we can take it off line
i am using destinator 7 on diamond without any problem!
Consider "Garmin Mobile XT" as an alternative for the Diamond. Alas, due to the lack of an sd slot, you will need a keymaker even if you own it legally, but imho Garmins software makes most of the other options out there look like jokes.
//Svein
TT7
I just got the Western Europe map installed and it is just excellent.
My XDA Diamond is double worth its value due to TT7 being pre-installed...
No problems whatsoever... just fun...
Finally got tomtom sorted on the htc diamond, but is it just me or does it not look as good as the previous version (which I have on my vario 2) ? On the diamond tomtom looks a bit cramped up with all the info at the bottom when your driving, on the vario it's very clear. Not moaning about it as I do like the fact the new version tell you what road your currently on. Now all I have to do is work out how to transfer my favorites should be fun NT
I could really use some help here. I installed garmin xt on my htc and it worked perfectly untill i hard reset my device and installed it again. garmin cant detect my map and it shows no map on the navigator area. i did paste the img file on the root of my garmin. mapsource detects it as well yet no map to be viewed. any ideas?
I use Garmin too
My english is poor but I will try to explain my opinion.
The Diamond detect the satellites? if not, the garmin dont know where are and dont show the maps.
The maps are in the Garmin folder in the internal memory yet?
I am using Garmin 5.00.20 al all ok.
Carlos
Presumably GMXT is running on your Diamond. Can you see the World base map? Have you already achieved a Sat lock? If you have all these and still not able to see your detailed Map, then either it is locked, or you have not selected the Map on your GMXT setup.
jchoong said:
Presumably GMXT is running on your Diamond. Can you see the World base map? Have you already achieved a Sat lock? If you have all these and still not able to see your detailed Map, then either it is locked, or you have not selected the Map on your GMXT setup.
Click to expand...
Click to collapse
im facing same problem here. installed garmin tx, also archived the Sat Lock (it's working), anyway the Map is locked. I used it before into my Symbian Garmin, but i use to add the Map Unlock code into GMAPSUPP.UNL file into \garmin dir, i dunno if the same produce re for the Windows Mobile version?
PD: every time i initiate the Garmin, it ask for a 8 digit product key (this weren't asked into the symbian garmin, you can hit continue anyway)
Just came across this update for tomtom 7
http://download.tomtom.com/sweet/navcore/navcore_7.910.9185_TT_SIGNED.htc_diamond.cab
Seems to work OK on mine, but I never had any problems with lag
Bixx
already posted here somewhere...
Thanks buddy
Does it just install over the top of your old one >????
crash to install for me with tomtom 7.910 already install in intern storage....
Edit:
Also crash after uninstall of the old version
works fine on my diamond and cruise
Might find that it conflicts with the maps you have from your "older" version....install at you peril
ok so you suggest me to remove everything about tomtom on my phone, to install it and reput all on?
Can someone explain the diferentes with previous version?
Willem
Ok i had wrong: you have to unzip the file, it's not a cab but a rar files ...
Inside of you have a cab of tomtom which installed IN the phone memory and NOT into the storage ...
And what about the autorun.exe?
I don't know ....
Yeah, problem with my licence card now ...
theres also a raphael version http://download.tomtom.com/sweet/navcore/navcore_7.910.9185_TT_SIGNED.htc_raphael.cab
i have yet to see differences in all of these TomTom updates...
Works fine on my diamond, but im using version 8 maps.
Also, i installed after a format so i had no existing tomtom on there.
kaos_king said:
Works fine on my diamond, but im using version 8 maps.
Also, i installed after a format so i had no existing tomtom on there.
Click to expand...
Click to collapse
kaos_king,
What device did you state that you were purchasing the maps for when buying the maps form the Tomtom shop?
I downloaded TT 7.910 via TTHome 2.5 without problem and installed a sample map. This is working fine, so i'm ready to purchase a map, but am unsure which device option to specify and indeed, whether it makes any difference as its a map only.
Thanks.
I am sorry if this has been answered before, but I have tried to search for an answer to this but not found any.
I've attempted to install TOMTOM 5 on my Diamond with no success and any help would be much appreciated.
I have the disc and the path is D:\disc1\tomtom-navigator-5-Benelux\setup. When I run the install, the dreaded message 'TomTom Setup Application has encountered a problem and needs to close. We are sorry for the inconvenience' is displayed.
I copied the whole disc1 folder to the internal storage on my diamond but all the files were read only. Where am I going wrong??!!??
If you want to install tomtom at your phone then you need a .cab file just do a search at this forum and you will find one the only thing is that its a tomtom 7. and I don't believe it will run the maps of tomtom 5 but whit a good search in Google or somewhere else you maid find aswell the right maps.
Willem
Thanks, but what ,cab file? What is a .cab file?
A .cab file is used to install applications on Windows Mobile devices. Only TomTom 7 or later will work with the Diamond as no earlier versions worked with the inbuilt GPS receiver.
poedgirl said:
A .cab file is used to install applications on Windows Mobile devices. Only TomTom 7 or later will work with the Diamond as no earlier versions worked with the inbuilt GPS receiver.
Click to expand...
Click to collapse
Before I used TT7.9 I had TT6.30 running on my MDA IV, getting a fix was horrible thought, but after that TT6.30 worked just fine...
poedgirl said:
A .cab file is used to install applications on Windows Mobile devices. Only TomTom 7 or later will work with the Diamond as no earlier versions worked with the inbuilt GPS receiver.
Click to expand...
Click to collapse
Is that the reason I can't get the maps to work on the Diamond I picked up on Friday
Strange as the TT version I have, 5.1, worked great on the internal one on the SPVm700 I just moved away from.
My issue is how to get TT to read the maps. Once I've installed the cab files on the device I can't get them to read the maps on the internal storage. If I try and install the cab files on the internal I can't get TT to fire.
Really don't know where to go next - and dn't want to go back to teh m700 when traveling.
Ta muchly
i think its the location on where you're maps should be placed. On my diamond, the map files are located on the ROOT of the internal storage. Thats the only way it seems for it to be found. So it should be place in : Mobile Device\Internal Storage.