Database Develop

how do you install .net compact framework 3.5 on you HTC?

i ccan't figure this out does anyone can tell me the procedure?
were to download and how to install??

Do a search. on either google or on this forum before asking plz.
This question has been answerd before.
But sins there was no thread that was acualy called like your question ill post the answer and maby next time when someone search they will defenetly find the answer
Go to the link below and download the program and install it on your computer.
When its done it will install it on your phone aswell. (so keep it connectded to the computer while you install it)
http://www.microsoft.com/downloads/d...displaylang=en

Go here
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
If you read the instructions, it will tell u.
This package uses ActiveSync 4.0 to update the device. Before running NETCFSetupv35.msi, connect your device to your PC. If your device is not connected, ActiveSync will store the CAB file and will not install the package until you connect. If you are not using ActiveSync, run the CAB files on the device that correspond to the device–specific CAB files found in the install folder.

For now, it's not possible to download directly the cab file from MS site

google for the following files:
- NETCFv35.wm.armv4i.cab
- netcfcfg.cab (saves yourself from editing registry)
You will identify trust-worthy locations easy

Easier than you can imagine.
Search MODACO forum ( www.modaco.com ) NETCFCFG.cab and NETCFv35.vm.armv4i.cab
Install both and you will have a simple application in program menu to choose between net 2.0 and 3.5. DONE
You can also choose to use 2.0 for some applications and 3.5 for other

thnks y´all i found it on modaco, got it worked!!

pls help, I can't install it
it writes: "installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
I cant even uninstall it, and I get this msg always

"installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution: I kill Kaiser Notification and then I can install .NET Framework without this problem. This app. using .NET Framework.
So I think the solution is in closing/killing all running applications.

What is the "kaiser notification"?
I have the same install error.
Thank you.

i have the same installation error as the last two posters. i tried killing every program i can and i still get the error

me too !......still can not install netcf v3.5 !!

After 2 days searching high & low through internet all discussion session, still can not find a solution. Therefore I made a self tracing and tried all kinds of method, at last I found a solution without doing a hard reset !!
rename mscoree.dll under windows\ to mscoree.dll.txt
re-install netcf v3.5
no more any error code comes up
thats it !!

I am running a tytn II, with the same problem. Install, i get the error. I can't uninstall, atleast not when I try through the 3.5 installer (remove or repair) or the "remove programs" on the kaiser.
I have hard reset the phone 2x,and regardless of whether I am installing from the exe or the cab file on the phone, still get the same error as everyone else.
This past time, i tried changing the name of the mscoree.dll under windows\ to mscoree.dll.txt and mscoree35.dll to mscoree35.dll.txt
same problem. I'm really beyond annoyed. Can someone help?

have a sprint diamond, how do i check which version i have and if its the newest?
it seems like all the programs i try and install say it requires a newer version than the one installed on the device but its only a month old so im not sure.. any help would be great..
thanks!!

I have the same question. I've searched all over and can't find an explanation of what .Net 3.5 is or how to find out if I have it already. I have a Sprint (CDMA) HTC Touch Diamond. Thanks.

I had the same problem on my HTC Kaiser, but I found a solution.
I found a program that acts like safe mode on a computer.
So if you install that program and restart in safe mode (you need to select safe mode when you boot), you will be able to install the compact framework 3.5.
Probable some locked files prevent the normal installation.
The program is an evaluation version, limited to 14 days, but since you only need it for the framework, you don't need to keep if you don't want to.
The app: SafeMode 3

...still not working on my touch diamond.
i've renamed the dll and tried the safe mode app. But I still get the same error.
btw: i have this problem since i installed a cooked rom.

Thanks. Was also having the install issue (I had previously installed and then removed 3.5 but good old ms clearly didn't remove correctly).
Renaming mscoree.dll worked (I tried mscoree2.5.dll before but that didn't work as it was in use so I couldn't rename that).
Glad it worked, was facing dropping back to previous backups or installing a task manager to kill processes (a good task manager program will show all your processes), just to reinstall 3.5.

another thing that goes wrong with the 6.5 wm and tf3d installed:
when you go to the movies, and you put your phone into vibrate, with the left volume keys, the phone goes into vibrate fine,
but when you set it back to full volume, the next time someone calls, it only vibrates, you have to go to: Settings, Sound and change the ringtone manualy to make it ring again...
Sorry, Wrong Forum...

How to install .net

I was wondering about how to install the .net file from microsoft. Someone told me to do it through activesync but I don't understand how to actually install it to the phone from activesync. Any help will be appreciated.

Not sure if this is the proper way to link you to the file, but this is what I used to install .net 3.5 on my fuze:
http://justpctech.com/PPC/NETCFv35.wm.armv4i.cab
Hope that helps (Sorry, I couldn't figure out how to attach the file).

thank you. I hope it works.

I was wondering about how to install the .net file from microsoft. Someone told me to do it through activesync but I don't understand how to actually install it to the phone from activesync. Any help will be appreciated.

Assuming you are serious
fiendslyr said:
I was wondering about how to install the .net file from microsoft. Someone told me to do it through activesync but I don't understand how to actually install it to the phone from activesync. Any help will be appreciated.
Click to expand...
Click to collapse
I'm gonna play nice with this as your posts would indicate you are somewhat new to this sort of thing
Basically download the file from MS to your pc or laptop.
Sync your phone to PC or Laptop using activesync. Once you have done this run the .exe file on your pc or laptop and it will automatically extract, install to your pc/laptop and install what is required to your phone. Done.
Quite easy really.
Oh, a word of advice.
One would assume you are installing this so you can run Advanced config or something of that nature. Pls pls ensure you read up on tweaking prior to making changes. Advanced Config is basically a GUI interface to your phones registry. Bugger your reg up and its hard reset time baby!!

nah, im not that new. I already installed .net. Now that post again was due to something random I don't know about. However, i would like to know if i am supposed to uninstall the previous version of .net or does the touch pro go ahead and use the newly installed one. I'm wondering this because I know some people were having this problem.

fiendslyr said:
nah, im not that new. I already installed .net. Now that post again was due to something random I don't know about. However, i would like to know if i am supposed to uninstall the previous version of .net or does the touch pro go ahead and use the newly installed one. I'm wondering this because I know some people were having this problem.
Click to expand...
Click to collapse
You do not uninstall version 2 -- some programs need that instead of 3.5. As for configuring, use .net config. Go here for instructions and download: http://www.modaco.com/content/windo...act-framework-3-5-without-upgrading-your-rom/

.NET Framework 3.5 not installing on Tilt!

I've been trying to install the .NET framework for my Tilt, and it keeps spitting out "installation unsuccessful". It installs fine on my computer, then it goes to install it to my phone via ActiveSync (Windows Mobile Device Center actually because I use Vista). The installation screen on my Tilt pops up saying it's installing, but the bar doesn't move at all, and after a few seconds it just says it's unsuccessful without giving a reason!
I'm using the stock ATT Tilt rom, 6.1 version. I haven't done anything special to it, so I have no idea why it wouldn't work...
Can anyone spare some sage wisdom as to why this won't install? I'm trying to use wmVista and it needs 3.5 to work .
Note: I downloaded the .NET 3.5 right from Microsoft: http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en

Have you tried copying the NET CF3.5.cab directly to your Kaiser & then installing. The cab can be found in the installation folder on your PC or on this site if you do a search.
I've always installed from the cab file never from the PC installation so might be worth you trying it !

You might want to get the mobile version of .net 3.5...
http://frifor.com/download/IBI/NETCFv35.wm.armv4i.CAB
Download that to your memory card, then launch it with file explorer on your phone, and it should start to install all on its own. Install it to your device, not the media card, for quicker running .net 3.5, or if you want to save space install it to the media card, but it will run slower...
And FYI, the search function works very well, as well, if you had looked about 5 posts bellow this new one you created you would have seen a thread already dealing with this exact issue.

pjcforpres said:
You might want to get the mobile version of .net 3.5...
http://frifor.com/download/IBI/NETCFv35.wm.armv4i.CAB
Download that to your memory card, then launch it with file explorer on your phone, and it should start to install all on its own. Install it to your device, not the media card, for quicker running .net 3.5, or if you want to save space install it to the media card, but it will run slower...
And FYI, the search function works very well, as well, if you had looked about 5 posts bellow this new one you created you would have seen a thread already dealing with this exact issue.
Click to expand...
Click to collapse
Ah, I saw that thread before posting but I assumed by his first post that his problem was different than mine. I just check it out again and saw the direct downloads for the cab file, so I'm gonna try that out. Thank you for your help!
(I'm a new poster, but I've been lurking around these boards for a while now looking for stuff for my Tilt)
Hopefully this works...

i installed .NET CF 3.5 on my device then after installing my camera is just plain black and doesnt show any picture.

problem solved!
- i installed Resco Registry Explorer and .NET compact framework 3.5 on my Kaiser
- opened resco registry and searched for the .NET CF
- disabled .NET CF 2.0 by changing value from 1 to 0
- then enable .NET CF 3.5 by changing value from 0 to 1

I had the same problem, used your link, it worked perfectly. THANKS!!!!

Help Diamond Compact Framework 3.5 stopped working

Help 3.5 framework isn't working and I can't update it toboot...:-/
might have something to do with memaid as I moved a few dlls to the internal storage....but I'm not sure. Also tried uninstalling it and that seemed to fail..
Tried reinstalling and I'm getting:
Installation error. Stop all applications and processes, maximise available storage space, and run iinstallation again. Support info: 2'
I'm at my wits end as quite a few programs I liked using require this...Help please!

anyone know how i can completely remove .net framework and try again as the reinstall is failing and uninstall isnt working either perhaps ill have to do it manually?
I have *so* many programs installed that I don't want to flash a fresh ROM.....it'll take *way* too long to set my device up again. It'd take months perhaps.
pretty pretty pretty please help me :-/

Tried tweaking now can't see .net compact framework but install still fails with the same error code.
Can anyone help?.....
Please?

Deleted all reg entries at:
HK Local machine\software\microsoft\netframework...
Reinstall of 2.0 framework appeared successful....
Errors on reboot. Programs which require it crashing with:
File or assembly name
One program:
'System.Windows.Forms, Version=3.5.0.0, Culture=neutral, PublicKeyToken=969DB8053D3322AC', or one of its dependencies, was not found.'
AdvancedConfig givesthe same error (and I really need to tweak some of these settings back but it won't load!)
ShootMe! crashes simply with 'We're sorry' and I can't see the error report.....
Please someone help! I'm at my wits end. I'll try deleting the reg entries and installing .net framework 3.5 in the hope.....

[Q] Please advise. Cannot install NETCF v35..

I have the Manila Maxsense 2.5 UI on my tp2. I just updated it to the latest sense 2.5 for September 4. I cannot get the net compact frame v35 to install after I install sense 2.5. It is telling me:
'A later version of the .NET Compact Framework is already installed. If you want to install this version, first remove the existing version.'
Can someone tell me how to do this. It is not in the remove programs in settings folder. I had my sense 2.5 up and working along with the android project software on the sd card. I decided it might be a good idea to save all my settings to restore phone, program, icon etc., then hard reset the phone. Along with this I reformatted my sd card (8gb) with fat 32. Then placed the phone settings restore files back onto th sd card. Now I can't install the dual boot with the android software.
Any idea?
Thanks in advance to whomever can help.
I have searched this forum up and down, along with google for a day and a half for a solution to this problem.
Thanks,
Paul H

What ROM?
Is there any reason to believe that the latest version of .NETCF is not already installed?

chevy383surfing said:
'A later version of the .NET Compact Framework is already installed. If you want to install this version, first remove the existing version.'
Click to expand...
Click to collapse
it should also ask you "do you want to uninstall current version of net compact"
(usually it does) press yes and you are good to go.

(I need to install the: (NETCFv35.wm.armv4i)....
(Energy.RHODIUM.24631.Sense2.5.MaxSense.Sep.04) - ROM.
This is what I want to figure out. If the ROM already has it.
When I try to install it, I get that message"
('A later version of the .NET Compact Framework is already installed. If you want to install this version, first remove the existing version.')
I understand that when you install a regular application for the TP2, it will ask you if you want to uninstall it before it installs the new app. Then it simply installs.
This doesn't give me that choice. It is basically telling me to uninstall something that isn't there; at least on my SD card. I save all cab files to a folder on the SD card. Only applications that are ROM critical are installed in the phones main memory. Now, when I try to open the file: (GenY-DualBOOT-v1.0.6.0-CAB) to attempt to boot up: (ProjectAndroid2.2BLAZN.083010), the Dual Boot file will not install. It says that I need to install the: (NETCFv35.wm.armv4i) file. I can't find another copy of a compact framework file anywhere to uninstall. I had this same, new Sept. 4 ROM installed yesterday along with android and they worked pretty awesome together, in my opinion. Maybe I should just post this in the android forum. I just don't want to piss people off by posting something that has already been posted, and in which I searched XDA website and can't find any solutions.
Once I get this up and going I am going to start making donations for the ROM makers and android project!
Oh, and I do understand the android is not a full ROM. I just want to get them to load up fine.
Thanks for anyone's help!
Paul H

Pretty sure the Energy ROMs have the latest version cooked in.

redpoint73 said:
Pretty sure the Energy ROMs have the latest version cooked in.
Click to expand...
Click to collapse
Yea, that is what I'm pretty sure of. But why will the dual boot not install? I do think it is burned into the ROM also. That's why I am puzzled.

you already have the latest version of netframework cooked in your rom.
you can always install a small program called netcfg to make sure which version of net cf you are using.
http://www.4shared.com/file/69575131/8ad67ad2/netcfcfg.html

Hay 'the show stopper', that helped a lot! This was a utility was the foremost resolution to the conflicts I was/am having! I finally got the android back up and running, and so far I have been able to run android just fine. I am going to keep on researching the the xandroid software as it is being updated!
Thanks,
Paul